Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “k mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Characterization and Calibration of an AERONET-OC Radiometer

The Ocean Color component of the global Aerosol Robotic Network (AERONET-OC) utilizes CE-318 sun photometers modified for above-water radiometry from fixed structures such as oil rigs, lighthouses and service platforms. Primarily, AERONET-OC measurements allow determination of the water-leaving radiance required for the validation of ocean color satellite data products. In this study, we characterized and calibrated one instrument from the AERONET-OC network, identified as AERONET #080. A laser-illuminated integrating sphere of known radiance enabled determination of the absolute radiance responsivity for 7 bands. We compared the results to calibrations from the AERONET facility at the Goddard Space Flight Center of the National Aeronautics and Space Administration and from the Joint Research Centre of the European Commission. These results agree within the estimated mean comparison uncertainty of 1.88 % (k = 2). We also assessed these results using calibrated lamp-illuminated integrating spheres and observed a spectral dependence to the comparison results that is unexplained.

B. C. Johnson↗

Multisensor Machine Learning to Retrieve High Spatiotemporal Resolution Land Surface Temperature

Climate change is making heat waves more frequent, long-lasting, and severe. While multiple satellite types provide data to monitor surface temperature, geostationary (GEO) sensors provide near-continuous, continental-scale observations which can better capture the diurnal variability of land surface temperature (LST) than intermittent observations from low-earth orbit (LEO) sensors. However, standard products from GEO satellites are available at coarsened spatial and temporal resolutions compared to the native sensor resolution. Using datasets from the NASA Earth Exchange, we leveraged co-located, co-temporal observations from LEO and GEO satellites to learn a data-driven mapping using a convolutional neural network. The resulting NASA Earth eXchange Artificial Intelligence LST (NEXAI-LST) achieved a mean absolute error of 1.73 K relative to the target LEO product and improves on both spatial and temporal resolution [2 km, 10 minute] compared to the GEO full disk standard product [10 km, hourly]. In validation against measurements from a ground-based sensor network, NEXAI-LST achieves similar or better fit than both LEO and GEO standard products, while depending none of the prior knowledge of land surface and atmospheric states required by physical-statistical models. Further, application of the model to unseen LEO and GEO satellites demonstrates robust generalization of the model across spatial region, time of day, and sensor. In support of NASA’s open-source science initiative, we make our NEXAI-LST product, model, and codes available to facilitate data exploration and further studies.

Kate Marie Duffy↗

Land Surface Temperature from GOES-East and GOES-West

Land surface temperature (LST) is an important climate parameter that controls the surface energy budget. For climate applications, information is needed at the global scale with representation of the diurnal cycle. To achieve global coverage there is a need to merge about five independent geostationary (GEO) satellites that have different observing capabilities. An issue of practical importance is the merging of independent satellite observations in areas of overlap. An optimal approach in such areas could eliminate the need for redundant computations by differently viewing satellites. We use a previously developed approach to derive information on LST from GOES-East (GOES-E), modify it for application to GOES-West (GOES-W) and implement it simultaneously across areas of overlap at 5-km spatial resolution. We evaluate the GOES-based LST against in situ observations and an independent MODIS product for the period of 2004–09. The methodology proposed minimizes differences between satellites in areas of overlap. The mean and median values of the differences in monthly mean LST retrieved from GOES-E and GOES-W at 0600 UTC for July are 0.01 and 0.11 K, respectively. Similarly, at 1800 UTC the respective mean and median value of the differences were 0.15 and 1.33 K. These findings can provide guidelines for potential users to decide whether the reported accuracy based on one satellite alone, meets their needs in area of overlap. Since the 6 yr record of LST was produced at hourly time scale, the data are well suited to address scientific issues that require the representation of LST diurnal cycle or the diurnal temperature range (DTR).

54 ENVIRONMENTAL SCIENCES↗

Spacecraft camera image registration

A system for achieving spacecraft camera (1, 2) image registration comprises a portion external to the spacecraft and an image motion compensation system (IMCS) portion onboard the spacecraft. Within the IMCS, a computer (38) calculates an image registration compensation signal (60) which is sent to the scan control loops (84, 88, 94, 98) of the onboard cameras (1, 2). At the location external to the spacecraft, the long-term orbital and attitude perturbations on the spacecraft are modeled. Coefficients (K, A) from this model are periodically sent to the onboard computer (38) by means of a command unit (39). The coefficients (K, A) take into account observations of stars and landmarks made by the spacecraft cameras (1, 2) themselves. The computer (38) takes as inputs the updated coefficients (K, A) plus synchronization information indicating the mirror position (AZ, EL) of each of the spacecraft cameras (1, 2), operating mode, and starting and stopping status of the scan lines generated by these cameras (1, 2), and generates in response thereto the image registration compensation signal (60). The sources of periodic thermal errors on the spacecraft are discussed. The system is checked by calculating measurement residuals, the difference between the landmark and star locations predicted at the external location and the landmark and star locations as measured by the spacecraft cameras (1, 2).

Kamel, Ahmed A.↗

Global exospheric temperatures from ESRO 4 scale height measurements

The scale height temperatures considered are based on molecular nitrogen measurements by the gas analyzer aboard the ESRO 4 in the altitude range from 280 to 310 km during the interval from December 1972 to April 1974, a period of low solar activity. At the altitude of measurement during the considered period, the scale height temperature is essentially the exospheric temperature. The mean scale height temperature derived from 1833 independent N2 scale heights is 708 K. It is concluded that the ESRO 4 data provides evidence of mean global temperatures of less than 800 K.

Keating, G. M.↗

Constraints on Climate and Habitability for Earth-like Exoplanets Determined from a General Circulation Model

Conventional definitions of habitability require abundant liquid surface water to exist continuously over geologic timescales. Water in each of its thermodynamic phases interacts with solar and thermal radiation and is the cause for strong climatic feedbacks. Thus, assessments of the habitable zone require models to include a complete treatment of the hydrological cycle over geologic time. Here, we use the Community Atmosphere Model from the National Center for Atmospheric Research to study the evolution of climate for an Earth-like planet at constant CO2, under a wide range of stellar fluxes from F-, G-, and K-dwarf main sequence stars. Around each star we find four stable climate states defined by mutually exclusive global mean surface temperatures (Ts); snowball (Ts ≤ 235 K), waterbelt (235 K ≤ Ts ≤ 250 K), temperate (275 K ≤ Ts ≤ 315 K), and moist greenhouse (Ts ≥ 330 K). Each is separated by abrupt climatic transitions. Waterbelt, temperate, and cooler moist greenhouse climates can maintain open-ocean against both sea ice albedo and hydrogen escape processes respectively, and thus constitute habitable worlds. We consider the warmest possible habitable planet as having Ts ∼ 355 K, at which point diffusion limited water-loss could remove an Earth ocean in ∼1 Gyr. Without long timescale regulation of non-condensable greenhouse species at Earth-like temperatures and pressures, such as CO2, habitability can be maintained for an upper limit of ∼2.2, ∼2.4, and ∼4.7 Gyr around F-, G-, and K-dwarf stars respectively, due to main sequence brightening.

Eric T Wolf↗

Climate Response of Direct Radiative Forcing of Anthropogenic Black Carbon

The equilibrium climate effect of direct radiative forcing of anthropogenic black carbon (BC) is examined by 100-year simulations in the Goddard Institute for Space Studies General Circulation Model II-prime coupled to a mixed-layer ocean model. Anthropogenic BC is predicted to raise globally and annually averaged equilibrium surface air temperature by 0.20 K if BC is assumed to be externally mixed. The predicted increase is significantly greater in the Northern Hemisphere (0.29 K) than in the Southern Hemisphere (0.11 K). If BC is assumed to be internally mixed with the present day level of sulfate aerosol, the predicted annual mean surface temperature increase rises to 0.37 K globally, 0.54 K for the Northern Hemisphere, and 0.20 K for the Southern Hemisphere. The climate sensitivity of BC direct radiative forcing is calculated to be 0.6 K W (sup -1) square meters, which is about 70% of that of CO2, independent of the assumption of BC mixing state. The largest surface temperature response occurs over the northern high latitudes during winter and early spring. In the tropics and midlatitudes, the largest temperature increase is predicted to occur in the upper troposphere. Direct radiative forcing of anthropogenic BC is also predicted to lead to a change of precipitation patterns in the tropics; precipitation is predicted to increase between 0 and 20 N and decrease between 0 and 20 S, shifting the intertropical convergence zone northward. If BC is assumed to be internally mixed with sulfate instead of externally mixed, the change in precipitation pattern is enhanced. The change in precipitation pattern is not predicted to alter the global burden of BC significantly because the change occurs predominantly in regions removed from BC sources.

Chung, Serena H.↗

Spin dynamics and relaxation in 7.6 nm thin film of La 0.7 Sr 0.3 MnO 3 /SrTiO 3 : ac magnetic susceptibility and magnetic viscosity investigations

Analysis of the results from our investigations of the temperature dependence of ac susceptibilities (χ' and χ'') and magnetic viscosity in a 7.6 nm thin film of La 0.7 Sr 0.3 MnO 3 grown on SrTiO 3 (001) substrate is presented. The Curie temperature (T C ) of this film is magnetic field (H) dependent, varying as [T C (H) - T C (0)] ~ H n with T C (0) = 270 K and n = 0.15. Temperature dependence of χ' and χ'' measured at ac frequencies f m in the range of 0.1–10 kHz shows a broad peak near 230 K associated with the blocking temperature (T B ) of spin clusters present in the 1.4 nm surface layer and a frequency dependent peak near 270 K associated with T C . The mean relaxation time τ determined from the Cole–Cole analysis of the temperature dependent χ' and χ'' is shown to fit the Vogel–Fulcher law: τ = τ 0 exp[ΔE/k B (T - T 0 )] with T 0 = 245 K, ΔE/k B = 270 K = T C and τ 0 = 1.2 x 10 -9 s. Magnetic viscosity S (measured in H = 0 for a sample cooled in H = 50 Oe) determined from the fit to the magnetization: M (t)= M (0) – S ln t, with time t up to 2 h, shows a peak at 230 K above which M (2 h) switches to negative values for temperatures up to T C (0). It is argued that this negative magnetization results from an interaction between the superparamagnetic spin clusters and the ferromagnetic phase, both being present in the temperature range of T B < T < T C .

36 MATERIALS SCIENCE↗

Influence of Transport on Two-Dimensional Model Simulation. Tracer Sensitivity to 2-D Model Transport: Long Lived Tracers - 1

In this study, we examine the sensitivity of long lived tracers to changes in the base transport components in our 2-D model. Changes to the strength of the residual circulation in the upper troposphere and stratosphere and changes to the lower stratospheric K(sub zz) had similar effects in that increasing the transport rates decreased the overall stratospheric mean age, and increased the rate of removal of material from the stratosphere. Increasing the stratospheric K(sub yy) increased the mean age due to the greater recycling of air parcels through the middle atmosphere, via the residual circulation, before returning to the troposphere. However, increasing K(sub yy) along with self-consistent increases in the corresponding planetary wave drive, which leads to a stronger residual circulation, more than compensates for the K(sub yy)-effect, and produces significantly younger ages throughout the stratosphere. Simulations with very small tropical stratospheric K(sub yy) decreased the globally averaged age of air by as much as 25% in the middle and upper stratosphere, and resulted in substantially weaker vertical age gradients above 20 km in the extratropics. We found only very small stratospheric tracer sensitivity to the magnitude of the horizontal mixing across the tropopause, and to the strength of the mesospheric gravity wave drag and diffusion used in the model. We also investigated the transport influence on chemically active tracers and found a strong age-tracer correlation, both in concentration and calculated lifetimes. The base model transport gives the most favorable overall comparison with a variety of inert tracer observations, and provides a significant improvement over our previous 1995 model transport. Moderate changes to the base transport were found to provide modest agreement with some of the measurements. Transport scenarios with residence times ranging from moderately shorter to slightly longer relative to the base case simulated N2O lifetimes that were within the observational estimates of Volk et al. [1997]. However, only scenarios with rather fast transport rates were comparable with the Volk et al. estimates of CFCl3 lifetimes. This is inconsistent with model-measurement comparisons of mean age in which the base model or slightly slower transport rates compared the most favorably with balloon SF6 data. For all comparisons shown, large transport changes away from the base case resulted in simulations that were outside the range of measurements, and in many cases, far outside this range.

Fleming, Eric L.↗

Resonance production in Pb+Pb collisions at 5.02 TeV

The yields, mean transverse momenta, and flow of K* 0 , ρ 0 , Λ(1520) resonances provide an evidence of a late stage hadronic rescattering in ultrarelativistic central heavy ion collisions [1]. Using hydrodynamic + hadronic afterburner simulations of Pb+Pb collisions at 5.02 TeV we achieve a reasonable description of resonance yields and spectra as a function of collision centrality. We demonstrate that the measurements of Λ(1520)’s mean transverse momentum allow to constrain the unknown branching ratios of Σ* → Λ(1520)π decays. Hadronic dynamics leads to an enhanced Δ(1232) production in central collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stability of absorption phenomena in laser-thermal propulsion

The mean flow and stability characteristics of laser absorption phenomena in a choked converging-diverging nozzle are considered. Calculations are presented for a given nozzle geometry and a series of laser intensities. Gas absorptivities corresponding to a hydrogen-cesium mixture are used with different initial temperatures being selected to investigate the effects of changes in the shape of the k-T curve. Both stability and mean flow calculations are limited to the one-dimensional case. The mean flow results show a decrease in mass flow as laser power is increased, along with increasingly steep temperature profiles. Calculations span regions of partial and complete absorption. One region is found where multiple solutions exist. Local stability results indicate the u-c characteristic is the only unstable mode in the unheated case. Laser heat addition makes this mode more unstable and also destabilizes the u-characteristic. Numerical calculations of disturbance propagation show that the instability of the u-c disturbances is counteracted by their reflection to u + c disturbances at the upstream end. The growth of the u-disturbances is localized in regions where the temperature profile is steep and they are damped in other regions. The increasing destabilization that is observed with increased laser power is probably the reason for difficulty in obtaining converged mean flow solutions at high laser intensities.

Merkle, C. L.↗

High-speed phase contrast imaging of spray breakup of jet fuels under combusting conditions

X-ray phase contrast imaging is conducted at 90,517 Hz on a fuel spray to characterize the breakup of the bulk fuel into ligaments and individual droplets in a single-sector, swirl-stabilized combustor under reacting conditions. Phase contrast imaging is used to qualitatively assess spray breakup for two fuels: Jet-A, which represents a normal viscosity fuel, and a blend of JP-5 (64%) and farnesane (36% by volume), which represents a high-viscosity fuel, at three fuel-flow rates and two air inlet temperatures. Time-series images of the fuels show that atomization occurs much more rapidly at higher fuel pressure with thinner ligaments being rapidly shredded. The high-viscosity fuel is qualitatively observed to have markedly longer, thicker ligaments and larger droplet diameters after the primary breakup than the normal viscosity fuel. Using an image processing and droplet quantification strategy, the mean droplet velocity magnitudes were found to decrease with decreasing fuel pressure and fuel-flow rate. The increase in preheat temperature from 323 to 370 K results in an increase in the mean droplet velocity magnitude and a decrease in numerical average and Sauter mean diameter, indicating improved atomization. The high-viscosity fuel was found to have larger average droplet diameters at each condition than the normal viscosity fuel. The increased preheat is found to enhance the combustion efficiency, which is hypothesized to couple with the improved atomization due to the higher combustion temperatures. This indicates the importance of examining spray atomization and breakup under realistic combusting conditions for relevant fuels as the heat release directly couples with the atomization process.

42 ENGINEERING↗

Toward a theory of interstellar turbulence. 1: Weak Alfvenic turbulence

We study weak Alfvenic turbulence of an incompressible, magnetized fluid in some detail, with a view to developing a firm theoretical basis for the dynamics of small-scale turbulence in the interstellar medium. We prove that resonant 3-wave interactions are absent. We also show that the Iroshnikov-Kraichnan theory of incompressible, magnetohydrodynamic turbulence -- which is widely accepted -- describes weak 3-wave turbulence; consequently, it is incorrect. Physical arguments, as well as detailed calculations of the coupling coefficients are used to demonstrate that these interactions are empty. We then examine resonant 4-wave interactions, and show that the resonance relations forbid energy transport to small spatial scales along the direction of the mean magnetic field, for both the shear Alfven wave and the pseudo Alfven wave. The three-dimensional inertial-range energy spectrum of 4-wave shear Alfven turbulence guessed from physical arguments reads E(k(sub z), k(sub perpendicular)) approximately V(sub A)v(sub L)L(exp -1/3)k(sub perpendicular)(exp -10/3), where V(sub A) is the Alfven speed, and v(sub L) is the velocity difference across the outer scale L. Given this spectrum, the velocity difference across lambda(sub perpendicular) approximately k(sub perpendicular exp -1) is v(sub lambda (sub perpendicular)) is approximately v(sub L)(lambda(sub perpendicular)/L)(exp 2/3). We derive a kinetic equation, and prove that this energy spectrum is a stationary solution and that it implies a positive flux of energy in k-space, along directions perpendicular to the mean magnetic field. Using this energy spectrum, we deduce that 4-wave interactions strengthen as the energy cascades to small, perpendicular spatial scales; beyond an upper bound in perpendicular wavenumber, k(sub perpendicular)L is approximately (V(sub A)/v(sub L))(exp 3/2), weak turbulence theory ceases to be valid. Energy excitation amplitudes must be very small for the 4-wave inertial-range to be substantial. When the excitation is strong, the width of the 4-wave inertial-range shrinks to zero. This seems likely to be the case in the interstellar medium.

Sridhar, S.↗

InGaAs/InAlAs hot-electron transistor

Using InGaAs for the base and InAlAs for the emitter and collector barriers, the first hot-electron transistor in this material system is fabricated. It is shown that 1.6 percent of the injected hot electrons can be transported ballistically through a 0.3 micron thick In(0.53)Ga(0.47)As plus 800-A-thick InAlAs barrier layer at 77 K giving rise to an average mean free path of 920 A. An energy spread of 130 MeV was observed for the ballistic electrons injected at about 700 MeV above the thermal equilibrium conditions. The value of collector barrier heights measured are in reasonable agreement with those deduced independently from thermionic emission studies in InGaAs gate, InAlAs/InGaAs capacitor structures.

Reddy, U. K.↗

Characterizations of linear sufficient statistics

A necessary and sufficient condition is developed such that there exists a continous linear sufficient statistic T for a dominated collection of totally finite measures defined on the Borel field generated by the open sets of a Banach space X. In particular, corollary necessary and sufficient conditions are given so that there exists a rank K linear sufficient statistic T for any finite collection of probability measures having n-variate normal densities. In this case a simple calculation, involving only the population means and covariances, determines the smallest integer K for which there exists a rank K linear sufficient statistic T (as well as an associated statistic T itself).

Peters, B. C., Jr.↗

Apollo 15 measurement of lunar surface brightness temperatures - Thermal conductivity of the upper 1.5 meters of regolith.

In situ measurements of lunar surface brightness temperatures made as a part of the Apollo Lunar Surface Experiments Package at the Apollo 15 Hadley Rille landing site are reported. Data derived from five thermocouples of the Heat Flow Experiment, which are lying on or just above the surface, are used to examine the thermal properties of the upper 15 cm of the lunar regolith using eclipse and nighttime cool-down temperatures. Application of finite-difference techniques in modeling the lunar soil shows that the thermocouple data are best fit by a model consisting of a low-density and low-thermal conductivity surface layer approximately 2 cm thick overlying a region increasing in conductivity and density with depth. Conductivities on the order of 0.00001 W per cm per deg K are postulated for the upper layer, with conductivity increasing to the order of 0.0001 W per cm per deg K at depths exceeding 20 cm. An increase in mean temperature with depth indicates that the ratio of radiative to conductive transfer at 350 K is 2.7 for at least the upper few centimeters of lunar soil; this value is nearly twice that measured for returned lunar fines.

Keihm, S. J.↗

Temperature-Corrected Model of Turbulence in Hot Jet Flows

An improved correction has been developed to increase the accuracy with which certain formulations of computational fluid dynamics predict mixing in shear layers of hot jet flows. The CFD formulations in question are those derived from the Reynolds-averaged Navier-Stokes equations closed by means of a two-equation model of turbulence, known as the k-epsilon model, wherein effects of turbulence are summarized by means of an eddy viscosity. The need for a correction arises because it is well known among specialists in CFD that two-equation turbulence models, which were developed and calibrated for room-temperature, low Mach-number, plane-mixing-layer flows, underpredict mixing in shear layers of hot jet flows. The present correction represents an attempt to account for increased mixing that takes place in jet flows characterized by high gradients of total temperature. This correction also incorporates a commonly accepted, previously developed correction for the effect of compressibility on mixing.

Abdol-Hamid, Khaled S.↗

The occultation of SAO 78505 by Jupiter

On 13 December 1989, Jupiter occulted a star with visual magnitude 8.7 and an estimated K magnitude of 7. We observed the event from Kitt Peak, Arizona, using a 64 x 64 infrared camera at a wavelength of 2.16 microns. The resulting data on refractive defocusing of the stellar signal give information on the temperature of the jovian atmosphere at pressures approximately 2 to 10 microbar, at near-equatorial latitudes. These are the first new stellar-occulation data for the high jovian atmosphere since the widely observed occulation of beta Sco A and C in 1971. Because of improvements in instrumental capability, our data are comparable to the best beta Sco A data though the star is six magnitudes fainter. We derive a mean atmospheric temperature of 176 +/- 12 K on a level surface corresponding to an equatorial radius of 71,880 km and a pressure of 1.8 microbar at a jovi- centric latitude of 8 deg. This result complements the beta Sco results by providing improved precision at low jovicentric latitudes where the fainter star beta Sco C was used in 1971.

Hubbard, W. B.↗