Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Effect of jet exit vanes on flow pulsations in an open-jet wind tunnel

An investigation was conducted of various jet exit vane configurations in the open test section of the Langley 4- by 7-Meter Tunnel to determine their effectiveness in reducing flow pulsations. The data consist of the instantaneous velocity fluctuations measured with hot-wire anemometers located at the tunnel centerline, 39.5 ft (12.0) downstream of the jet exit. The data are presented in the form of measured root-mean-square turbulence levels in the test section and a time series analysis for the baseline jet exit configuration (without vanes) and forthe most effective vane configuration, which consisted of triangular vanes alternating into and out of the flow around the jet exit.

Sellers, W. L., III↗
NASA NTRS1978

Application of second-order turbulent modeling to the prediction of radiated aerodynamic sound

The Ribner formulation of the generation of aerodynamic sound is coupled with predictions of second-order velocity correlations and integral scale to estimate the sound radiated from several complicated jet flows. In particular, it is shown that the sound radiated from a cold swirling jet is greater than from its nonswirling equal thrust counterpart. The noise radiated from the flow field of a multitube suppressor was estimated and compared with an equal thrust diameter Gaussian jet. It is shown that the multitube concept is indeed quieter.

Bilanin, A. J.↗
NASA NTRS2000

Generation and Radiation of Acoustic Waves from a 2D Shear Layer

A thin free shear layer containing an inflection point in the mean velocity profile is inherently unstable. Disturbances in the flow field can excite the unstable behavior of a shear layer, if the appropriate combination of frequencies and shear layer thicknesses exists, causing instability waves to grow. For other combinations of frequencies and thicknesses, these instability waves remain neutral in amplitude or decay in the downstream direction. A growing instability wave radiates noise when its phase velocity becomes supersonic relative to the ambient speed of sound. This occurs primarily when the mean jet flow velocity is supersonic. Thus, the small disturbances in the flow, which themselves may generate noise, have generated an additional noise source. It is the purpose of this problem to test the ability of CAA to compute this additional source of noise. The problem is idealized such that the exciting disturbance is a fixed known acoustic source pulsating at a single frequency. The source is placed inside of a 2D jet with parallel flow; hence, the shear layer thickness is constant. With the source amplitude small enough, the problem is governed by the following set of linear equations given in dimensional form.

Dahl, Milo D.↗
NASA NTRS1981

The role of the helical jet mode in aerodynamic noise generation

The helical jet mode is modeled by an infinite helical vortex filament, and an exact analytical solution for the induced velocity field interior to the filament is derived. These expressions are then used to model the jet flow field and to analyze the high subsonic and supersonic jet noise generation. It is shown that noise will be generated directly if the helical mode convects or rotates. Reducing this noise by stabilizing the mode is difficult, since the self-induced velocities of the mode itself cause it to convect and rotate; the use of noncircular nozzles is suggested to eliminate the symmetry of the boundary condition. The helical mode can also generate noise indirectly by inducing time-dependent Coriolis accelerations on small-scale turbulence propagating in its induced velocity field. This suggests that any upstream turbulence generation has an enhanced potential for noise propagation when propagating in the presence of the helical mode.

Hardin, J. C.↗
NASA NTRS1997

Design and Checkout of a High Speed Research Nozzle Evaluation Rig

The High Flow Jet Exit Rig (HFJER) was designed to provide simulated mixed flow turbojet engine exhaust for one- seventh scale models of advanced High Speed Research test nozzles. The new rig was designed to be used at NASA Lewis Research Center in the Nozzle Acoustic Test Rig and the 8x6 Supersonic Wind Tunnel. Capabilities were also designed to collect nozzle thrust measurement, aerodynamic measurements, and acoustic measurements when installed at the Nozzle Acoustic Test Rig. Simulated engine exhaust can be supplied from a high pressure air source at 33 pounds of air per second at 530 degrees Rankine and nozzle pressure ratios of 4.0. In addition, a combustion unit was designed from a J-58 aircraft engine burner to provide 20 pounds of air per second at 2000 degrees Rankine, also at nozzle pressure ratios of 4.0. These airflow capacities were designed to test High Speed Research nozzles with exhaust areas from eighteen square inches to twenty-two square inches. Nozzle inlet flow measurement is available through pressure and temperature sensors installed in the rig. Research instrumentation on High Speed Research nozzles is available with a maximum of 200 individual pressure and 100 individual temperature measurements. Checkout testing was performed in May 1997 with a 22 square inch ASME long radius flow nozzle. Checkout test results will be summarized and compared to the stated design goals.

Castner, Raymond S.↗
NASA NTRS1999

Periodic Excitation for Jet Vectoring and Enhanced Spreading

The effects of periodic excitation on the evolution of a turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit and excitation was introduced at the junction between the jet exit and the diffuser inlet. The introduction of high amplitude periodic excitation at the jet exit enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Vectoring is achieved by applying the excitation over a fraction of the circumference of the circular jet, enhancing its spreading rate on the excited side and its tendency to reattach to that side. Static deflection studies demonstrate that the presence of the wide-angle diffuser increases the effectiveness of the added periodic momentum due to a favorable interaction between the excitation, the jet shear-layer and the diffuser wall. This point was further demonstrated by the evolution of a wave packet that was excited in the jet shear-layer. Strong amplification of the wave packet was measured with a diffuser attached to the jet exit. The turbulent jet responds quickly (10-20 msec) to step changes in the level of the excitation input. The response scales with the jet exit velocity and is independent of the Reynolds number. Jet deflection angles were found to be highly sensitive to the relative direction between the excitation and the jet flow and less sensitive to the excitation frequency. The higher jet deflection angles were obtained for a diffuser length of about two diameters and for diffusers with half-angles greater than 15 degrees.

Pack, LaTunia G.↗
NASA NTRS2008

The Structure of the Electron Outflow Jet in Collisionless Magnetic Reconnection

Particle-in-cell simulations and analytic theory are applied to the study of the electron outflow jet in collisionless magnetic reconnection. In these jets, which have also been identified in spacecraft observations, electron flow speeds in thin layers exceed the ExB drift, suggesting that electrons are unmagnetized. In this study, we find the surprising result that the electron flow jets can be explained by a combination of EjcB drifts and of diamagnetic effects, through the combination of the gradients of particle pressure and of the magnetic field. In a suitably rotated coordinate system, the electron motion is readily decomposed into ExB drift and the motion to support the required current density, consistent with electron gyrotropy. This process appears to be nondissipative.

Hesse, Michael↗
NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appear to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗
NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appears to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗
NASA NTRS1984

A study of flow past an airfoil with a jet issuing from its lower surface

The aerodynamics of a NACA 0018 airfoil with a rectangular jet of finite aspect ratio exiting from its lower surface at 90 deg to the chord were investigated. The jet was located at 50% of the wing chord. Measurements include static pressures on the airfoil surface, total pressures in the near wake, and local velocity vectors in different planes of the wake. The effects of jet cross flow interaction on the aerodynamics of the airfoil are studied. It is indicated that at all values of momentum coefficients, the jet cross flow interaction produces a strong contra-rotating vortex structure in the near wake. The flow behind the jet forms a closed recirculation region which extends up to a chord length down stream of the trailing edge which results in the flow field to become highly three dimensional. The various aerodynamic force coefficients vary significantly along the span of the wing. The results are compared with a jet flap configuration.

Krothapalli, A.↗
NASA NTRS2009

Enhancement of USM3D Unstructured Flow Solver for High-Speed High-Temperature Shear Flows

Large temperature and pressure fluctuations have a profound effect on turbulence development in transonic and supersonic jets. For high-speed, high-temperature jet flows, standard turbulence models lack the ability to predict the observed mixing rate of a shear layer. Several proposals to address this deficiency have been advanced in the literature to modify the turbulence transport equations in a variety of ways. In the present study, some of the most proven and simple modifications to two-equation turbulence models have been selected and implemented in NASA's USM3D tetrahedral Navier-Stokes flow solver. The modifications include the addition of compressibility correction and pressure dilatation terms in the turbulence transport equations for high-speed flows, and the addition of a simple modification to the Boussinesq's closure model coefficient for high-temperature jets. The efficacy of the extended models is demonstrated by comparison with experimental data for two supersonic axisymmetric jet test cases at design pressure ratio.

Pandya, Mohagna J.↗
NASA NTRS1971

Supersonic jet noise suppression using coaxial flow interaction.

The scope of investigations conducted with coaxial interacting supersonic jet flows covers (1) acoustic measurements in both the far noise field and near noise field, (2) surveys of mean flow properties and fluctuating pressures, optical visualization of interacting jet flows, the associated flow and shock structure changes and the noise field, (3) the effects of different geometrical parameters of the coaxial nozzles, and (4) thrust measurements. It is shown that the flow interaction between two suitable controlled interacting coaxial supersonic axisymmetric jet flows results in substantial noise reduction based on equivalent thrust considerations. This flow interaction technique appears to be potentially an attractive approach for suppression of noise from supersonic jet exhausts.

Dosanjh, D. S.↗
NASA NTRS1973

Experiments on confined turbulent jets in cross flow.

Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-domensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.

Kamotani, Y.↗
NASA NTRS1974

Experiments on confined turbulent jets in cross flow

Results are reported of experiments on the effects of an opposite wall on the characteristics of turbulent jets injected into a cross flow, for unheated and heated jets. Longitudinal and transverse distributions of velocity and temperature are presented for single and multiple circular jets, and trajectories are presented for two-dimensional jets. The opposite wall has relatively little effect on a single jet unless the ratio of jet to cross flow momentum flux is large enough for the jet to impinge on the opposite wall. For a row of jets aligned perpendicularly to the cross flow, the opposite wall exerts progressively larger influence as the spacing between jets decreases. Much of the effect of jet and wall proximity can be understood by considering the interaction of the vortex flow which is the major feature of the structure of a single jet in a cross flow. Smoke photographs are shown to elucidate some of the interaction patterns.

Kamotani, Y.↗
NASA NTRS1976

Aeroacoustics: Jet noise, combustion and core engine noise

The papers in this volume deal essentially with the question whether the amplification of noise is due to the jet noise phenomenon or perhaps an interaction of airframe and core engine noise. In the area of jet noise suppression, various promising suppressor concepts are examined. The swirling flow jet noise suppressor is shown to provide significant noise reduction with minimal thrust losses. Progress in the aircraft engine core noise problem is reflected by seven research-type papers. Two possible mechanisms are seen to be responsible for core noise. One is the direct noise radiated from the turbulent combustion in the primary combuster and transmitted through the turbine, passing out the nozzle into the far field. The other mechanism is the noise that is emitted from hot spots being convected through the turbine. Which of these mechanisms (or perhaps both mechanisms) is responsible for core noise, and what are the coupling mechanisms of core engine noise and jet noise are the questions confronting researchers.

Schwartz, I. R.↗
NASA NTRS1978

The free jet as a simulator of forward velocity effects on jet noise

A thorough theoretical and experimental study of the effects of the free-jet shear layer on the transmission of sound from a model jet placed within the free jet to the far-field receiver located outside the free-jet flow was conducted. The validity and accuracy of the free-jet flight simulation technique for forward velocity effects on jet noise was evaluated. Transformation charts and a systematic computational procedure for converting measurements from a free-jet simulation to the corresponding results from a wind-tunnel simulation, and, finally, to the flight case were provided. The effects of simulated forward flight on jet mixing noise, internal noise and shock-associated noise from model-scale unheated and heated jets were established experimentally in a free-jet facility. It was illustrated that the existing anomalies between full-scale flight data and model-scale flight simulation data projected to the flight case, could well be due to the contamination of flight data by engine internal noise.

Ahuja, K. K.↗
NASA NTRS1982

Turbofan forced mixer-nozzle internal flowfield. Volume 3: A computer code for 3-D mixing in axisymmetric nozzles

A finite difference method is developed for making detailed predictions of three dimensional subsonic turbulent flow in turbofan lobe mixers. The governing equations are solved by a forward-marching solution procedure which corrects an inviscid potential flow solution for viscous and thermal effects, secondary flows, total pressure distortion and losses, internal flow blockage and pressure drop. Test calculations for a turbulent coaxial jet flow verify that the turbulence model performs satisfactorily for this relatively simple flow. Lobe mixer flows are presented for two geometries typical of current mixer design. These calculations included both hot and cold flow conditions, and both matched and mismatched Mach number and total pressure in the fan and turbine streams.

Kreskovsky, J. P.↗
NASA NTRS1994

Transport phenomena in stratified multi-fluid flo w in the presence and absence of gravity

An experiment is being conducted to study the effects of buoyancy on planar stratified flows. A wind tunnel has been designed and constructed to generate planar flows with separate heating for the top and bottom planar air jets emerging from slot nozzles separated by an insulating splitter plate. The objective is to generate planar jet flows with well defined and well controlled velocity and temperature profiles. Magnitudes of velocity and temperature will be varied separately in each flow for both laminar and turbulent flow conditions. Both stably and unstably stratified flows will be studied by changing the temperature distributions in each air stream. This paper reports on the design of the apparatus and initial measurements of velocity and turbulence made by laser Doppler velocimetry.

Chigier, Norman↗