Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “half life”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Carbon-14 terrestrial ages and weathering of 27 meteorites from the southern high plains and adjacent areas (USA)

We report on a series of 27 C-14 terrestrial ages of meteorites from four states in the central and southwestern U.S. These results were compared to the earlier work of Boeckl (1972). Our results showed that the weathering rate for destruction of meteorites is lower than suggested by Boeckl. We estimate a 'half-life' for removal of meteorites of about 10 to 15 ka, similar to that derived for Roosevelt County meteorites. We also studied the weathering of these meteorites compared to terrestrial age. Only a weak correlation was observed, and for these meteorites the degree of weathering can only be taken as a weak indicator of terrestrial residence time. We also measured the delta-C-13 and C-14 and amount of weathering-product carbonates which show some interesting variations with the length of time the meteorites have been exposed to weathering.

Jull, A. J. T.↗

Heliocentric zoning of the asteroid belt by aluminum-26 heating

Variations in petrology among meteorites attest to a strong heating event early in solar system history, but the heat source has remained unresolved. Aluminum-26 has been considered the most likely high-energy, short-lived radionuclide (half-life 0.72 million years) since the discovery of its decay product - excess Mg-26 - in Allende CAI's. Furthermore, observation of relict Mg-26 in an achondritic clast and in feldspars within ordinary chondrites (3,4) provided strong evidence for live Al-26 in meteorite parent bodies and not just in refractory nebular condensates. The inferred amount of Al-26 is consistent with constraints on the thermal evolution of both ordinary and carbonaceous chondrite parent objects up to a few hundred kilometers in diameter. Meteorites can constrain the early thermal evolution of their parent body locations, provided that a link can be established between asteroid spectrophotometric signature and meteorite class. Asteroid compositions are heliocentrically distributed: objects thought to have experienced high metamorphic or even melting temperatures are located closer to the sun, whereas apparently unaltered or mildly heated asteroids are located farther away. Heliocentric zoning could be the result of Al-26 heating if the initial amount of the radionuclide incorporated into planetesimals was controlled by accretion time, which in turn varies with semimajor axis. Analytic expressions for planetary accretion may be integrated to given the time, tau, required for a planetesimal to grow to a specified radius: tau varies as a(sup n), where n = 1.5 to 3 depending on the assumptions about variations in the surface density of the planetesimal swarm. Numerical simulations of planetesimal accretion at fixed semimajor axis demonstrate that variations in accretion time among small planetesimals can be strongly nonlinear depending on the initial conditions and model assumptions. The general relationship with semimajor axis remains valid because it depends only on the initial orbit properties and distribution of the planesimal swarm. In order to demonstrate the basic dependence of thermal evolution on semimajor axis, we parameterized accretion time across the asteroid belt according to tau varies as a(sup n) and calculated the subsequent thermal history. Objects at a specified semimajor axis were assumed to have the same accretion time, regardless of size. We set the initial Al-26/Al-27 ratio = 6 x 10(exp -5) and treated n and tau(sub 0) at a(sub 0) = 3 AU as adjustable parameters. The thermal model included temperature-dependent properties of ice and rock (CM chondrite analog) and the thermodynamic effects of phase transitions.

Grimm, R. E.↗

Natural oil slicks in the Gulf of Mexico visible from space

Images of distinctive slicks in the Gulf of Mexico collected by two orbital platforms are presented. An analytical expression is derived for the formation of floating slicks based on a parameterization of seafloor flow rate, downstream movement on the surface, half-life of floating oil, and threshold thickness for detection. From application of this equation to the lengths of the observed slicks, it is suggested that the slicks in the Atlantis photograph and in the TM image represent seepage rates of 2.2-30 cu m/1000 sq km s and 1.4-18 cu m/1000 sq km d, respectively. Generalizing to an annual rate suggests that total natural seepage in this region is of the order of at least 20,000 cu m/yr (120,000 barrels/yr).

Macdonald, I. R.↗

Ozone profiles over McMurdo Station, Antarctica, during August, September, and October of 1986 - 1991

Vertical profiles of ozone and temperature have been measured at McMurdo Station, Antarctica, during the springs of 1986 to 1991, roughly every two days from 25 August to 31 October. Comparisons of temporal histories and average vertical structure for these years reveals some striking consistency in the ozone depletion process. Ozone depletion generally begins in early September, and with a half-life of 20-30 days, reaches its maximum in mid-October. The depletion occurs almost exclusively between 12 and 20 km. At the time of maximum depletion total ozone has been decreased roughly 40 percent while ozone between 12 and 20 km has been reduced 80 percent. Recovery generally begins in late October with the influx, above 20 km, of ozone rich air from the lower latitudes. From this record the worst years for ozone depletion were 1987, 1989, and 1990. A new region of ozone depletion, below 12 km, was observed in 1991, coinciding with the entrainment of a volcanic cloud into the polar vortex.

Deshler, Terry↗

Chemical studies of H chondrites. 5: Temporal variations of sources

We report Cl-36 (301-kyr half-life) data obtained by accelerator mass spectrometry allowing nominal terrestrial ages to be determined for 39 Antarctic H4-6 chondrites for which contents of volatile trace elements are known. The compositional difference between these Antarctic meteorites and 58 non-Antarctic falls increases with terrestrial age and, using multivariate statistical techniques, becomes highly significant for Antarctic samples with ages greater than 50 kyr. The compositional difference is inconsistent with trivial causes such as weathering and seems to reflect differences in thermal histories of parent sources. Temporal source variations for the H chondrite flux on Earth thus exist not only on a short-term, 40 years, basis (Dodd et al., 1993) but also on a long-term, greater than 50 kyr, basis.

Michlovich, Edward S.↗

Measurement of proton production cross sections of (sup 10)Be and (sup 26)Al from elements found in lunar rocks

Cosmic rays penetrate the lunar surface and interact with the lunar rocks to produce both radionuclides and stable nuclides. Production depth profiles for long-lived radionuclides produce in lunar rocks are measured using Accelerator Mass Spectrometry (AMS). For a particular radionuclide these production depth profiles can be interpreted to give an estimate for the solar proton flux over a time period characterized by the half life of the radionuclide under study. This analysis is possible if and only if all the cross sections for the interactions of all cosmic ray particles with all elements found in lunar rocks are well known. In practice, the most important cross sections needed are the proton production cross sections, because 98% of solar cosmic rays and (similar to)87% of galactic cosmic rays are protons. The cross sections for the production of long-lived radionuclides were very difficult to measure before the development of AMS and only in recent years has significant progress been made in determining these essential cross sections. Oxygen and silicon are major constituents of lunar rocks. We have reported already C-14 production cross sections from O and Si for proton energies 25-500 MeV, and O(p,x)(sup 10)Be from 58 160 MeV[6]. Here we present new measurements for the cross sections O(p,x)Be-10,O(p,x)Be-7, Si(p,x)Be-7,Si(p,x)Al-26, and Si(p,x)Na-22 from approximately 30 - 500 MeV.

Sisterson, J. M.↗

Measuring excitation functions needed to interpret cosmogenic nuclide production in lunar rocks

Radionuclides produced in lunar rocks by cosmic ray interactions are measured using Accelerator Mass Spectrometry or gamma-ray spectroscopy. From these measurements, estimates of the solar proton flux over time periods characterized by the half-life of the isotope under study can be made, if all the cross sections for all the reactions of all cosmic ray particles with all elements found in lunar rocks are known. Proton production cross sections are very important because (approximately) 98% of solar cosmic rays and (approximately) 87% of galactic cosmic rays are protons in the lunar environment. Many of the needed cross sections have never been measured. Targets of C, Al, Si, SiO2, mg, K, Ca, Fe and Ni have been irradiated using three accelerators to cover a proton energy range of 25-500 MeV. Excitation functions for Be-7, Be-10, Na-22, and Al-26 production from Mg and Al will be reported, and the consequences of using these new cross section values to estimate solar proton fluxes discussed.

Radiation Flux↗

Hydrolysis of Dihydrouridine and Related Compounds

Dihydrouridine is absent from the tRNA of almost all hyperthermophiles and most Archaea but is ubiquitous in the tRNA of Eubacteria and Eukaryotes. In order to investigate whether this could be due to instability, the rate of ring opening of dihydrouridine was measured between 25 and 120 C. The dihydrouridine ring is stable at 25 C, but the half-life at 100 C and pH 7 is 9.1 h, which is comparable to the doubling time of hyperthermophiles. This suggests an explanation for the absence of dihydrouridine from the tRNA of hyperthermophiles. The rates of ring opening of dihydrouracil, dihydrothymine, and 1-N-methyldihydrouracil were measured at 100 C and pH 6-9, as were the equilibrium constants for ring closure of the ureido acids to the dihydrouracils. The pH rate profiles for ring opening and ring closing were calculated from the data. Possible roles for dihydrouracils in the pre-RNA world are discussed.

House, Christopher H.↗

From the Primitive Atmosphere to the Prebiotic Soup to the Pre-RNA World

Organic compounds would have been produced in an earth's atmosphere that was reducing. The soup would contain amino and hydroxy acids, together with smaller amounts of purines and pyrimidines. The presence' of sugars is less likely, although they can be produced by the formose reaction from formaldehyde. However, the prebiotic synthesis of RNA has not been demonstrated. One problem is that ribose is not produced selectively over other pentoses and hexoses, except under special conditions. The second problem is that ribose is unstable, with a half-life at pH7 and 100 C of 73 minutes (44 years at 0 C). Other sugars are similarly unstable. Another problem is that there is no efficient prebiotic synthesis of polyphosphates, nor the glycosidic bond of nucleosides. This suggests that there may have been an informational macromolecule that preceded RNA. The RNA world refers to the time when RNA carried both the genetic information and the catalytic activity, and was subsequently converted to the DNA/protein world when protein synthesis began. Preceeding the RNA world was the Pre-RNA world, where a backbone different from ribose phosphate was used, and the bases may have been different from adenine, uracil, guanine and cytosine. We have shown recently that cytosine and uracil can be synthesized efficiently under prebiotic conditions using a dried lagoon model instead of the usual dilute ocean hypothesis. In addition, we have shown that uracil adds formaldehyde efficiently to give 5- hydroxymethyl uracil, which in turn adds various nucleophiles to give uracil analogs of most of the amino acids that occur in proteins. For example, the ammonia, guanidine and imidazole adducts from the analogs of lysine, arginine and histidine. This suggests that the catalytic potential of RNA may have been much more extensive than previously assumed. The major problem is finding out what was the precursor to the ribose phosphate backbone. This will be the key to developing prebiotic self-replicating systems.

Miller, Stanley L.↗

Measurements of proton-induced production cross sections for Cl-36 from Ca and K

Production cross sections for Cl-36 (half-life= 3.01 x 10(exp 5) y) have been measured for the nat.K(p,x), 39 K(p,x), nat.Ca(p,x) and Ca-40(p,x) reactions up to 40 MeV. The results of nat.Ca(p,x) reaction are generally consistent with measurements performed at somewhat higher energies. With the completion of these measurements it is now possible to proceed with model calculations of the solar cosmic ray (SCR) flux over the last 400 ky based on measurements of lunar surface materials.

Imamura, M.↗

Earth and Planetary Science Letters

Systematic measurements of the concentrations of cosmogen Ca-41 (half-life = 1.04 x 10(exp 5) yr) in the Apollo 15 long core 15001-15006 were performed by accelerator mass spectroscopy. Earlier measurements of cosmogenic Be-10, C-14, Al-26, Cl-36, and Mn-53 in the same core have provided confirmation and improvement of theoretical models for predicting production profiles of nuclides by cosmic ray induced spallation in the Moon and large meteorites. Unlike these nuclides, Ca-40 in the lunar surface is produced mainly by thermal neutron capture reactions on Ca-40. The maximum production of Ca-41, about 1 dpm/g Ca, was observed at a depth in the Moon of about 150 g/sq cm. For depths below about 300 g/sq cm, Ca-41 production falls off exponentially with an e-folding length of 175 g/sq cm. Neutron production in the Moon was modeled with the Los Alamos High Energy Transport Code System, and yields of nuclei produced by low-energy thermal and epithermal neutrons were calculated with the Monte Carlo N-Particle code. The new theoretical calculations using these codes are in good agreement with our measured Ca-41 concentrations as well as with Co-60 and direct neutron fluence measurements in the Moon.

K. Nishiizumi↗

Use of an Existing Airborne Radon Data Base in the Verification of the NASA/AEAP Core Model

The primary objective of this project was to apply the tropospheric atmospheric radon (Rn222) measurements to the development and verification of the global 3-D atmospheric chemical transport model under development by NASA's Atmospheric Effects of Aviation Project (AEAP). The AEAP project had two principal components: (1) a modeling effort, whose goal was to create, test and apply an elaborate three-dimensional atmospheric chemical transport model (the NASA/AEAP Core model to an evaluation of the possible short and long-term effects of aircraft emissions on atmospheric chemistry and climate--and (2) a measurement effort, whose goal was to obtain a focused set of atmospheric measurements that would provide some of the observational data used in the modeling effort. My activity in this project was confined to the first of these components. Both atmospheric transport and atmospheric chemical reactions (as well the input and removal of chemical species) are accounted for in the NASA/AEAP Core model. Thus, for example, in assessing the effect of aircraft effluents on the chemistry of a given region of the upper troposphere, the model must keep track not only of the chemical reactions of the effluent species emitted by aircraft flying in this region, but also of the transport into the region of these (and other) species from other, remote sources--for example, via the vertical convection of boundary layer air to the upper troposphere. Radon, because of its known surface source and known radioactive half-life, and freedom from chemical production or loss, and from removal from the atmosphere by physical scavenging, is a recognized and valuable tool for testing the transport components of global transport and circulation models.

Kritz, Mark A.↗

Ammonia Formation by the Reduction of Nitrite/Nitrate by FeS: Ammonia Formation Under Acidic Conditions

FeS reduces nitrite to, ammonia at pHs lower than the corresponding reduction by aqueous Fe+2. The reduction follows a reasonable first order decay, in nitrite concentration, with a half life of about 150 min (room temperature, CO2, pH 6.25). The highest ammonia product yield measured was 53%. Under CO2, the product yield decreases from pH 5.0 to pH 6.9. The increasing concentration of bicarbonate at higher pH interferes with the reaction. Bicarbonate interference is shown by comparing runs under N2 and CO2. The reaction proceeds well in the presence of such species as chloride, sulfate, and phosphate though the yield drops significantly with phosphate. FeS also reduces nitrate and, unlike with Fe+2, the reduction shows more reproducibility. Again, the product yield decreases with increasing pH, from 7% at pH 4.7 to 0% at pH 6.9. It appears as if nitrate is much more sensitive to the presence of added species, perhaps not competing as well for binding sites on the FeS surface. This may be the cause of the lack of reproducibility of nitrate reduction by Fe+2 (which also can be sensitive to binding by certain species).

Summers, David P.↗

Double Beta Decay of Tellurium-130: Current Status

Geochemically measured values of Te-130 half-life form two distinct clusters. Two different experiments were performed to check two proposed explanations: Xe loss and Xe inheritance. Neither is observed. Additional information is contained in the original extended abstract.

Meshik, A. P.↗

Cr Isotopes in Allende Ca-Al-rich Inclusions

We have determined Cr isotope compositions in minerals from Allende CAI in order to address the initial 53Mn (half-life 3.7 Ma) abundance in the solar system. Additional information is contained in the original extended abstract.

Bogdanovski, O.↗

RF Manipulation of Ions in the High Performance Antiproton Trap (HiPAT)

The annihilation of antimatter provides the highest mass specific energy of any other known reaction. Proper harnessing of this energy holds great promise for future space propulsion systems. Many different propulsion concepts have been proposed that take advantage of antimatter, either using matter-antimatter as the primary fuel, or as a 'spark plug' for fusion and fission systems. In order to begin to address these concepts experimentally, a method of storing and transporting antimatter must be developed. The High Performance Antiproton Trap (HiPAT) is a first-generation storage and transportation device designed to store and transport 10(exp 12) antiprotons with a storage half-life of 18 days. It uses a Penning-Malmberg ion trap with a 4T magnetic field and 20 kV potential. This will enable researchers much more flexibility in the design of antimatter experiments related to propulsion. Ions cannot be stored indefinitely in a real trap, as ion cloud instabilities develop from imperfections in manufacturing and misalignments in assembly. Previous work has been done at both the National Institute of Standards and University of California in San Diego in using RF (radio frequency) signals to both diagnose and confine the ion cloud. Two electrodes in the trap have been segmented to allow both reception and transmission of RF waves in the ion cloud. Experiments are underway to determine the number of ions and density in the cloud by "listening" to protons contained in the HiPAT. Currently we believe the density of ions stored in the trap is roughly 10(exp 15) m(exp -3). Development of non-destructive techniques is vital to the project goals, enabling continuous monitoring of the quantities stored in the system. Experimental work is also being done in identifying RF transmission frequencies that can manipulate the density of the cloud, by exchanging energy and momentum between the RF wave and the ions. Preliminary experiments have demonstrated this interaction.

Pearson, J. Boise↗

Overview of the High Performance Antiproton (HiPAT) Experiment

The annihilation of matter with antimatter represents the highest energy density of any known reaction, producing 10(exp 8) MJ/g, approximately 10 orders of magnitude more energy per unit mass than chemical based combustion. To take the first step towards using this energy for propulsion applications the NASA MSFC Propulsion Research Center (PRC) has initiated a research activity examining the storage of low energy antiprotons. Storage was identified as a key enabling technology since it builds the experience base necessary to understand the handling of antiprotons for virtually all utilization and high-density storage concepts. To address this need, a device referred to as the High Performance Antiproton Trap (HiPAT) is under development at the NASA MSFC PRC. The HiPAT is an electromagnetic system (Penning-Malmberg design) consisting of a 4 Tesla superconductor, a high voltage confinement electrode system (operation up to 20 KV), and an ultra high vacuum test section (operating in the 10(exp -12) torr range). The system was designed to be portable with an ultimate goal of maintaining 10(exp 12) charged particles with a half-life of 18 days. Currently, this system is being experimentally evaluated using normal matter ions which are cheap to produce and relatively easy to handle. These normal ions provide a good indication of overall trap behavior, with the exception of assessing annihilation losses. The ions are produced external to HiPAT using two hydrogen ion sources, with adjustable beam energy and current. Ion are transported in a beam line and controlled through the use of electrostatic optics. These optics serve to both focus and gate the incoming ions, providing microsecond-timed pulses that are dynamically captured by cycling the HiPAT electric containment field like a 'trap door'. The layout of this system more closely simulates the operations expected at an actual antiproton production facility where 'packets' of antiprotons with pulse widths measured in 100's of nanoseconds could be provided. Initial dynamic capture experiments have been performed with both trap and ton source system functioning at approximately 10% of maximum levels, minimizing the potential for extraneous effects. Dynamic trapping techniques demonstrated the successful capture of millions of hydrogen ions with good agreement with the predicted loading based on the timing sequence, trap electric field, and ion beam current. These techniques will be expanded to examine multiple shot capture or 'stacking' to increase the total number of ions stored within HiPAT.

Martin, James J.↗

Flow-Field Measurement of Device-Induced Embedded Streamwise Vortex on a Flat Plate

Detailed flow-field measurements were performed downstream of a single vortex generator (VG) using an advanced Stereo Digital Particle Image Velocimetry system. Thc passive flow-control devices examined consisted of a low-profile VG with a device height, h, approximately equal to 20 percent of the boundary-layer thickness, sigma, and a conventional VG with h is approximately sigma. Flow-field data were taken at twelve cross-flow planes downstream of the VG to document and quantify the evolution of embedded streamwise vortex. The effects of device angle of attack on vortex development downstream were compared between the low-profile VG and the conventional VG. Key parameters including vorticity, circulation, trajectory, and half-life radius - describing concentration, strength, path, and size, respectively--of the device-induced streamwise vortex were extracted from the flow-field data. The magnitude of maximum vorticity increases as angle of attack increases for the low-profile VG, but the trend is reversed for the conventional VG, probably due to flow stalling around the larger device at higher angles of attack. Peak vorticity and circulation for the low-profile VG decays exponentially and inversely proportional to the distance downstream from the device. The device-height normalized vortex trajectories for the low-profile VG, especially in the lateral direction, follow the general trends of the conventional VG. The experimental database was used to validate the predictive capability of computational fluid dynamics (CFD). CFD accurately predicts the vortex circulation and path; however, improvements are needed for predicting the vorticity strength and vortex size.

Yao, Chung-Sheng↗