Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gravity model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Estimating gravity wave parameters from oblique high-frequency backscatter: Modeling and analysis

A new technique for estimating electron density perturbation amplitudes of traveling ionospheric disturbances (TIDs), using HF radar data, is presented. TIDs are observed in HF radar data as enhancements of the ground-scattered power which propagate through the radar's field of view. These TIDs are the ionospheric manifestation of atmospheric acoustic-gravity waves. TID electron density perturbation amplitudes were estimated by simulating the radar returns, using HF ray tracing through a model ionosphere perturbed by a model gravity wave. The simulation determined the return power in the ground-scattered portion of the signal as a function of range, and this was compared to HF radar data from the Goose Bay HF radar at a time when evidence of gravity waves was present in the data. By varying the amplitude of the electron density perturbation in the model it was possible to estimate the perturbation of the actual wave. It was found that the perturbations that are observed by the Goose Bay HF radar are of the order of 20% to 35%. It was also found that the number of observable power enhancements, and the relative amplitudes of these enhancements, depended on the vertical thickness of the gravity wave's source region. From the simulations and observations it was estimated that the source region for the case presented here was approximately 20 km thick. In addition, the energy in the wave packet was calculated and compared to an estimate of the available energy in the source region. It was found that the wave energy was about 0.2% of the estimated available source region energy.

Bristow, W. A.↗

Gravity Field Mapping of Mars with MGS

Tracking of the MGS spacecraft in orbit at Mars by the Deep Space Network since last September has provided doppler and range measurements that are being used to improve the model of the Mars gravity field. During most of October 1997, April 1998, and June thru August 1998 high quality tracking data were obtained while the periapse was in the northern hemisphere at altitudes in the 170 to 190 km range. The eccentric orbit had a period of about 11.5 hrs and an inclination of about 96.2 degrees so that low altitude tracking was obtained over most of the northern hemisphere, including the north polar icecap. Data from the earlier Mariner 9 and Viking missions have been added to the MGS data and a series of experimental gravity models developed from the combined datasets. These models have generally been of degree and order 70 and are a significant improvement over earlier models that did not include the MGS data. Gravity anomalies over the north polar cap region of Mars are generally less than 50 to 100 mgals and show no obvious correlation with the topography. Successive MGS orbits derived using these new models are showing agreement at the 100 meter level, and this has been confirmed with the laser altimeter (MOLA) on MGS These comparisons are expected to improve significantly as more tracking data get included in the solution and the MGS orbit becomes more circular giving a more balanced geographical distribution of data at low altitude. This will happen early in 1999 as the orbit approaches the mapping configuration of a circular orbit at about 400 Km.

Smith, David E.↗

Determination of the ocean circulation using Geosat altimetry

A spherical harmonic model of the sea surface topography complete to degree and order 10 and a model of the earth's geopotential field complete to degree and order 50 have been obtained in a simultaneous solution using Geosat altimeter data and tracking data from 14 different satellites. The sea surface topography model compares well with oceanographic models computed using hydrographic data and ship drift data. Currently, errors in the estimated gravity field model limit the determination of the spherical harmonic coefficients of the general ocean circulation to degrees 10 and lower, corresponding to a minimum wavelength of 4000 km. Error analysis indicates that the correlation between the geoid and the sea surface topography model is less than 0.2, indicating good separation of the geoid and the sea surface topography at wavelengths of 4000 km or longer. Estimates of the scale factor for the significant wave height (H1/3), which is used to compute the electromagnetic bias correction and the bias for the Geosat altimeter, are obtained. The estimate of the H1/3 correction is 3.6 + or - 1.5 percent, and the height bias estimate is zero.

Nerem, R. S.↗

Toward a gradiometer analytic model

A new model is developed to model the data type, formulate the filter structure, and perform covariance for an orbiting gravity gradiometer, which is much more elaborate and realistic than the earlier gravity gradient model of Sonnabend and McEneaney (1988). The main new features of the new model are a general inertia tensor for the floated instrument, air drag and radiation pressure models using cubic power spectra, and more reasonable kinematics.

Sonnabend, Dave↗

Paramyxovirus Infection Mimics In Vivo Cellular Dynamics in Three-Demensional Human Bronchio-Epithelial Tissue-Like Assemblies

Respiratory syncytial virus and parainfluenza virus cause severe respiratory disease, especially in infants, children and the elderly. An in vitro model that accurately mimics infection of the human respiratory epithelium (HRE) would facilitate vaccine development greatly. Monolayer cultures traditionally used to study these viruses do not accurately and precisely differentiate the replication efficiencies of wild type and attenuated viruses. Therefore, we engineered novel three-dimensional (3D) tissue-like assemblies (TLAs) of human broncho-epithelial (HBE) cells to produce a more physiologically relevant in vitro model of the HRE. TLAs resemble HRE structurally and by expression of differentiated epithelial cell markers. Most significantly, wild type viruses exhibited a clear growth advantage over attenuated strains in TLAs unlike monolayer cultures. In addition, the TLAs responded to virus infection by secreting pro-inflammatory mediators similar to the respiratory epithelia of infected children. These characteristics make the TLA model a valuable platform technology to develop and evaluate live, attenuated respiratory virus vaccine candidates for human use. Respiratory virus diseases, the most frequent and least preventable of all infectious diseases, range in severity from the common cold to severe bronchiolitis and pneumonia . Two paramyxoviruses, respiratory syncytial virus (RSV) and parainfluenza virus type 3 (PIV3), are responsible for a majority of the most severe respiratory diseases of infants and young children. RSV causes 70% of all bronchiolitis cases and is a major cause of morbidity and mortality worldwide, especially in infants. PIV3 causes 10-15% of bronchiolitis and pneumonia during infancy, second only to RSV, and 40% of croup in infants To date, licensed vaccines are not available to prevent these respiratory diseases. At present, traditional monkey kidney (Vero and LLC-MK2) and human (HEp-2) tissue culture cells and small animal models (mouse, cotton rat, guinea pig, ferret, and hamster) fail to accurately imitate viral replication and human disease states (8). Lacking an authentic model has impeded the development and evaluation of live, attenuated vaccine candidates. Development of a physiologically relevant in vitro tissue culture model that reproduces characteristics of the HRE, the primary target of RSV and PIV3, would aid in predicting clinical attenuation and safety of vaccine candidates. Successful tissue engineering of a 3D human intestinal model using novel NASA technology inspired the development of a tri-culture 3D model for the HRE. Sequential layering of primary mesenchymal cells (comprised of normal human fibroblasts and endothelial cells) followed by BEAS-2B epithelial cells derived from human bronchi and tracheae were recapitulated on Cultisphere and/or cytodex3 microcarriers in cylindrical vessels that rotate horizontally creating an organized epithelial structure. Horizontal rotation randomizes the gravity vector modeling aspects of microgravity. Mesenchymal and epithelial cells grown under these conditions reproduce the structural organization, multi-cellular complexity, and differentiation state of the HRE. The opportunity to study respiratory viruses in a nasal epithelium model is invaluable because the most promising respiratory virus vaccine candidates are live attenuated viruses for intranasal administration. Here we characterize the interactions of respiratory viruses and epithelial cells grown under modeled microgravity in comparison to gravity-ladened monolayers. 3D HBE TLAs and traditional monolayers (2D) are infected at 35 C, the upper temperature of the upper HRE, to simulate in vivo infection conditions. Growth kinetics of wild type (wt) RSV and PIV3 viruses were compared in 2D and 3D cells to that of strains attenuated in humans or rhesus macaques. This novel 3D HBE model also offers an opportunity to study whether the epithelial cell function, especially in host defenses recapitulated by mimicking the structural organization of the HRE. In vivo, airway epithelial cells play a significant and dynamic role in host defense by blocking paracellular permeability and modulating airway function through cellular interactions or tight junctions. As regulators of the innate immune response, epithelial cells constitutively express cytokines, chemokines, and colony stimulating factors including RANTES, IL-8, IL-6, GM-CSF, and G-CSF for proactive host defense. In response to viral infection, epithelial cells induce potent immuno-modulatory and pro-inflammatory cytokines that recruit phagocytic and inflammatory cells to clear the virus and enhance protection. Although disease pathogenesis is classically attributed to the cytopathic effects of the pathogen, severe disease states associated with RSV and PIV3 are attributed to the inflammatory response, especially in infants. RSV is a potent inducer of cytokines and pro-inflammatory mediators in epithelial cells in vivo. A differentiated human epithelial model independent of the complete functional immune system will help elucidate the role of epithelial cells in respiratory disease. We reported here, virus and host cell interactions in 3D HBE TLAs are similar to that in vivo. Because the epithelial cell organization of the TLAs impacts not only the expression of airway epithelial characteristics, but also cellular communication, the TLAs represent a more physiologically relevant model of the HRE than BEAS-2B or other non-tumour monolayer models of respiratory disease. As a result, wild type respiratory viruses have a clear growth advantage over attenuated viruses in TLAs unlike traditional monolayers. In addition, the TLAs respond to wild type virus infection by secreting pro-inflammatory mediators characteristic of infected HRE. TLAs expressing microbial defense mechanisms provide an excellent model to study the interactions of respiratory pathogens with their host and to identify the innate immunity mediators. Therefore, 3D HBE TLAs offer advantages for the study of respiratory viruses and the development of viral vaccine candidates.

Deatly, Anne M.↗

Gravity fields of the terrestrial planets - Long-wavelength anomalies and tectonics

The paper discusses the gravity and topography data available for four terrestrial planets (earth, moon, Mars, and Venus), with particular emphasis on drawing inferences regarding the relationship of long-wavelength anomalies to tectonics. The discussion covers statistical analyses of global planetary gravity fields, relationship of gravity anomalies to elastic and viscoelastic models, relationship of gravity anomalies to convection models, finite strength, and isostasy (or the state of isostatic compensation). The cases of the earth and the moon are discussed in some detail. A summary of comparative planetology is presented.

Phillips, R. J.↗

Transient heat transfer and thermophysical properties measurements in low gravity

Theoretical computer models and correlations which describe phenomena important in the design of transient heat transfer systems are verified and extended. Attention is given to heat transfer to a fluid near the thermodynamic critical point, i.e., a highly compressible fluid. The validity of the computer model is tested by conducting heat-transfer experiments in a low gravity environment where gravity-driven motion is essentially eliminated. It is noted that the NASA KC135 aircraft provides a useful low-g platform for experimental work and provides valuable experience and background for experiments ultimately designed to fly on the Space Shuttle.

Giarratano, P. J.↗

Spacecraft Thermal and Optical Modeling Impacts on Estimation of the GRAIL Lunar Gravity Field

We summarize work performed involving thermo-optical modeling of the two Gravity Recovery And Interior Laboratory (GRAIL) spacecraft. We derived several reconciled spacecraft thermo-optical models having varying detail. We used the simplest in calculating SRP acceleration, and used the most detailed to calculate acceleration due to thermal re-radiation. For the latter, we used both the output of pre-launch finite-element-based thermal simulations and downlinked temperature sensor telemetry. The estimation process to recover the lunar gravity field utilizes both a nominal thermal re-radiation accleration history and an apriori error model derived from that plus an off-nominal history, which bounds parameter uncertainties as informed by sensitivity studies.

thermal modeling↗

Regional quasigeoid determination in Northern Germany and comparison with GPS

For the northern part of the Federal Republic of Germany, new quasigeoid solutions were computed by least squares collocation and fast Fourier transformation (FFT) techniques using point and mean gravity data, a digital terrain model, and a global geopotential model. As severe accuracy limitations for precise regional quasigeoid determination come from global model uncertainties, different geopotential models were investigated by combining them with gravimetric data and comparing the quasigeoid heights with GPS and leveling. Optimum results were obtained by a global model tailored to gravity data in Europe. Collocation and FFT results based on this model agree well. The comparison with GPS and leveling yields rms discrepancies of + or - 2 cm over approximately 400 km range.

Denker, Heiner↗

Groundwater Drought: Environmental Controls and Monitoring

Arising from a long-term deficit of precipitation, groundwater drought often lags meteorological drought by months to years, depending on climate and subsurface hydrogeological conditions. Due to the paucity of in situ groundwater data in many parts of the world, global monitoring of groundwater storage variations and drought may be best achieved using satellite observations and/or groundwater time series simulated by hydrological models. The Gravity Recovery and Climate Experiment (GRACE) and GRACE Follow On (GRACE-FO) missions have greatly benefitted the modeling and monitoring of groundwater storage changes and drought at the global scale. In this chapter, we first review environmental controls on the temporal variability of groundwater using in situ data. We then describe an approach that infuses GRACE and GRACE-FO observations into a land surface model for assessing groundwater storage changes and drought globally. We also discuss characteristics of simulated groundwater drought and the limitations of current groundwater drought monitoring approaches.

Bailing Li↗

Hydrodynamic Qualities of a 1/10-Size Powered Dynamic Model of the XP5Y-1 Flying Boat in Smooth Water: Langley Tank Model 246, TED No. NACA DE 320

The hydrodynamic characteristics of a 1/10-size powered dynamic model of the XP5Y-1 flying boat were determined in Langley tank no. 1. Stable take-offs were possible at all practicable positions of the center of gravity and flap deflections. An increase in gross load from 123.5 to 150.0 pounds (21.5 percent) had only a slight effect on the stable range for take-off. A decrease in forward acceleration from 3.0 to 1.0 feet per second per second had only a very small effect on the stable range for take-off. In general, the landings were free from skipping except at trims below 6 deg where one skip was encountered at an aft position of the center of gravity. The model porpoised during the landing runout at all positions of the center of gravity when landed at trims above 10 deg. Spray in the propellers was light at the design gross load, and was not considered excessive,at a gross load of 136.0 pounds.

Woodward, David R.↗

The fragmentation of proto-globular clusters. I - Thermal instabilities

The metal abundances among the stars within a typical globular cluster are remarkably homogeneous. This indicates that star formation in these systems was a globally coordinated event which occurred over a time span less than or comparable to the collapse time scale of the cluster. This issue is addressed by assuming that the fragmentation of a proto-globular cluster cloud proceeded in two steps. In the first step, thermal instability led to the rapid growth of initial fluctuations. This led to a large contrast in the dynamical time scales between the perturbations and the parent cloud, and the perturbations then underwent gravitational instabilities on short time scales. This process is modeled using one-dimensional hydrodynamic simulations of clouds both with and without external heat sources and self-gravity. The models include the effects of a non-equilibrium H2 abundance. The results indicate that fragmentation can occur on time scales significantly less than the dynamical time scale of the parent cloud.

Murray, Stephen D.↗

The solidification under zero gravity conditions of binary alloys exhibiting solid state immiscibility

The solidification behavior of gold-silicon alloys containing up to 25 at. % silicon was studied, and a mathematical model of gravity segregation during solidification was developed. A background of knowledge is provided which can be used in the design of zero gravity solidification experiments to be carried out in the 300-ft drop tower, in Aerobee rockets and in future space missions. Such experiments are needed to develop the basic scientific knowledge required for the design of economically viable space manufacturing processes. Some preliminary zero gravity experiments were carried out on a gold-25 at. % silicon alloy using the drop tower facility.

Johnson, A. A.↗

Planetary Gravity Fields and Their Impact on a Spacecraft Trajectory

The present work touches an interdisciplinary aspect of space exploration: the improvement of spacecraft navigation by means of enhanced planetary interior model derivation. The better the bodies in our solar system are known and modelled, the more accurately (and safely) a spacecraft can be navigated. In addition, the information about the internal structure of a planet, moon or any other planetary body can be used in arguments for different theories of solar system evolution. The focus of the work lies in a new approach for modelling the gravity field of small planetary bodies: the implementation of complex ellipsoidal coordinates (figure 1, [4]) for irregularly shaped bodies that cannot be represented well by a straightforward spheroidal approach. In order to carry out the required calculations the computer programme GRASP (Gravity Field of a Planetary Body and its Influence on a Spacecraft Trajectory) has been developed [5]. The programme furthermore allows deriving the impact of the body s gravity field on a spacecraft trajectory and thus permits predictions for future space mission flybys.

Weinwurm, G.↗

Precision orbit determination for the TOPEX/Poseidon mission

Computation of precise orbits for the TOPEX/Poseidon (T/P) spacecraft is analyzed focusing on gravity field modeling, nonconservative force modeling, satellite tracking technologies, and orbit determination software. It was found that the radial orbit error budget for T/P allows 10 cm rms error due to gravity field mismodeling, 3 cm due to solid earth and ocean tides, and 6 cm due to radiative forces, and 3 cm due to atmospheric drag. It is concluded that the current models are capable of achieving the radial orbit error requirements.

Nerem, R. S.↗

Translating Furnace For Fast Melting And Freezing

Developmental translating-furnace apparatus used to make ceramic/metal composite materials during parabolic trajectories of KC-135 airplane simulating low gravity. Mathematical modeling shows apparatus able both to melt metal alloys and to solidify resulting composite specimens during 22-to-30-second low-gravity intervals. Furnace assembly moves along crucible in programmed manner to preheat, melt, and solidfy specimen during interval to less than 22 second.

Workman, F.↗

Recent Advances in Mars Tectonics

Since the publication of the "Stress and Tectonics on Mars" chapter in the Mars book (the last comprehensive summary of our knowledge on the topic) considerable advances have been made in certain areas of Martian tectonics and significant advances are expected with the return of Mars Global Surveyor data. This abstract will summarize the advances in our knowledge of tectonic features and processes on Mars since the Mars book and point towards new areas of research that can be expected from the Mars Global Surveyor data. Two out of three areas of study that were discussed as future directions of work in the Mars chapter have had significant work directed towards them. One area is the field of structural mapping and understanding the timing of tectonic activity on Mars in the framework of the global stratigraphy. Although the general development and relative timing of the development of the Tharsis province on Mars had been understood for some time, actual placement of mapped tectonic features in a global stratigraphic framework has only recently been completed. The second area of study mentioned in the Mars chapter was the impact of improved topography and gravity on modeling loads and deriving stresses in the Martian lithosphere. Mars Global Surveyor is on the brink of returning vastly improved topographic and gravity fields and these newer data sets can be used to better define the size and shape of Tharsis and to quantify loads and derived stresses in the Martian lithosphere. Additional information is contained in the original extended abstract.

Golombek, M. P.↗