Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gas compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Fabrication of surrogate oxide spent fuel with various cracking patterns and design of an axial gas transport apparatus

In this article, understanding gas transport behavior in nuclear fuel rods is important for the design, performance, and safety of nuclear fuels. Surrogate materials help enable efficient research by reducing both the costs and the amount of time required. A parametric study using Darcy’s law is completed that demonstrates the feasibility of observing pressure decay over short 13-to-15-cm specimens to enable full characterization of the fabricated specimens using x-ray computed tomography. This paper demonstrates that thermally shocked and mechanically compressed alumina pellets produce surrogate samples whose various cracking patterns are representative of the severity of cracking observed as a function of burnup in irradiated nuclear fuels. Furthermore, image analyses of the cracking patterns—in conjunction with gas transport testing using surrogate samples—affords a valuable accelerated basis for developing gas transport simulations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Simulation of a rapid compression machine for evaluation of ignition chemistry and soot formation using gasoline/ethanol blends

Due to the projected decline of demand for gasoline in light duty engines and the advent of ethanol as a green fuel, the use of gasoline/ethanol blend fuels in heavy duty applications are being investigated as they are projected to have lower cost and lower lifecycle green house gas (GHG) emissions. In heavy duty engines, the primary mode of combustion is mixing controlled combustion where wide range of mixture conditions (equivalence ratio) exist. Soot emissions of these fuels in richer conditions are not well understood. The goal of this research is to evaluate some commercially available soot modeling codes for the particulate matter emissions from gasoline/ethanol fuel blends, especially at fuel rich conditions. A Rapid Compression Machine (RCM) is modeled in a three-dimensional numerical simulation using CONVERGE computational software using a reduced chemical kinetic mechanism with SAGE chemistry solver and a RANS k-ϵturbulence model with a sector model including the creviced piston. The creviced piston is used in the experimental setup to reduce boundary layer effects and to maintain a homogeneous core in the reaction cylinder. Computational fluid dynamics simulations are conducted for different gasoline-ethanol fuel blends from E10 (10% ethanol v/v) to E100. The fuel blend is modeled as a surrogate mixture of toluene, iso-octane, n-heptane for gasoline content, and ethanol. The computational results were validated against experimental results using pressure measurements and laser extinction diagnostics. Different soot models are investigated to evaluate their capability of predicting the sooting tendencies of fuel blends, especially in richer conditions experienced during mixing-controlled combustion. The experimental combustion characteristics such as the ignition delay of different blends of fuel are reasonably well predicted. The Particulate Size Mimic (PSM) model accurately predicts the soot generation characteristics of the different fuels, but the Hiroyasu-NSC model falls short in this regard. For accurate prediction of soot with the PSM model, the thermodynamic conditions during combustion must be accurately modeled. While the current computational modeling tools can produce accurate results for the prediction of particulate matter emissions, there is much work to be done in improving our understanding of the underlying fundamental processes.

Energy & Fuels↗
DOE OSTI2022

Ionization-Based Optical Structures for the Control of Short-Pulse Lasers (Abbreviated LDRD Report)

The intensity of light from the highest-power lasers is limited by the size of the optics required to amplify, compress, transport, and focus a laser beam. Indeed, optics damage puts strict constraints on the laser energy density that solid optics can sustain; this leads to enormous optics sizes and limits the maximum intensity that these lasers can achieve. In this project we investigated new types of diffractive optics based on mixtures of neutral gas and plasmas. The basic idea is to interfere laser beams in a gas near the ionization threshold, so that plasma is created in the constructive interference regions (i.e., the “bright” fringes of the interference pattern) while the destructive interference regions remain a neutral gas. The resulting refractive index modulation, due to the different indices in gas vs. plasma, effectively turns such structures into diffractive optics elements. We proposed several new types of optics based on this general concept: i) reflection gratings, which can act as mirrors of “pulse cleaners” to eliminate laser pre-pulse; ii) transmission gratings, as part of a new type of pulse compression scheme with the potential to achieve laser intensities orders of magnitude above what is currently feasible using solid-state optics; and iii) holographic lenses, to focus high-power lasers. We conducted laboratory experiments which demonstrated high efficiency reflection gratings, paving the way for practical applications of our new concepts.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Fuel Property Effects of a Broad Range of Potential Biofuels on Mixing Control Compression Ignition Engine Performance and Emissions

Conventional diesel engines will continue to hold a vital role in the heavy- and medium-duty markets for the transportation of goods along with many other uses. The ability to offset traditional diesel fuels with low-net-carbon biofuels could have a significant impact on reducing the carbon footprint of these vehicles. A prior study screened several hundred candidate biofuel blendstocks based on required diesel blendstock properties and identified 12 as the most promising. Eight representative biofuel blendstocks were blended at a 30% volumetric concentration with EPA certification ultra-low-sulfur diesel (ULSD) and were investigated for emissions and fuel efficiency performance. This study used a single cylinder engine (based on the Ford 6.7L engine) using Conventional Diesel Combustion (CDC), also known as Mixing Control Compression Ignition (MCCI). The density, cetane number, distillation curve and sooting tendency (using the yield sooting index method) of the fuels were measured. Start of injection (SOI) timing and exhaust gas recirculation (EGR) sweeps were conducted at three separate speed-load operating points to examine fuel effects on the NOX/soot and NOX/efficiency trade-offs as well as to evaluate EGR tolerance. The results show that the biofuel blends all reduced NOX and soot emissions without penalty to engine efficiency, even improving efficiency for some of the blends at certain points, with one particular blend of polyoxymethylene ethers (POMEs) improving efficiency at all points while drastically reducing soot by 79%.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Gas permeation properties of amorphous zeolitic imidazolate framework membranes made by atomic/molecular layer deposition

Amorphous metal-organic framework (MOF) membranes are desirable because they may retain some of the molecular sieving properties of their crystalline counterparts while being free of grain boundary defects, which often hinder the consistent achievement of high membrane performance. However, current methods, like melting and compression, for fabricating amorphous MOF membranes involve multi-step processes that require the formation of a crystalline membrane first, that is then amorphized, and therefore, could be challenging to scale. Here, we utilize atomic/molecular layer deposition (ALD/MLD) of diethylzinc (DEZ) and 2-methylimidazole (2mIm) to directly synthesize ultrathin amorphous zeolitic imidazolate framework (aZIF) deposits on γ-alumina-coated α-alumina supports. As the number of ALD/MLD cycles increased from 10 to 300, gas permeances decreased while ideal selectivities increased. Mixture separation factors for C3H6/C3H8, CO2/N2, and H2/C3H8 as high as 4, 37, and 194, respectively, were obtained. At 200 °C and 2.5 bar equimolar feed of H2 and C3H8, a H2/C3H8 mixture separation factor of 185 is obtained with an H2 permeance of ca. 4.15x10-8 mol/m2-s-Pa (124 GPU). Additionally, the membrane achieves a CO2/N2 mixture separation factor of 37 at 25 °C and 1 bar with a CO2 permeance of ca. 3.96x10-8 mol/m2-s-Pa (118 GPU). Considering the vast array of compositionally distinct aZIFs that can be potentially deposited by this approach, an enormously large parameter space for membrane design is emerging to be explored.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydrogen Storage with Aluminum Formate, ALF: Experimental, Computational, and Technoeconomic Studies

Long-duration storage of hydrogen is necessary for coupling renewable H 2 with stationary fuel cell power applications. In this work, aluminum formate (ALF), which adopts the ReO 3 -type structure, is shown to have remarkable H 2 storage performance at non-cryogenic (>120 K) temperatures and low pressures. The most promising performance of ALF is found between 120 K and 160 K and at 10 bar to 20 bar. The study illustrates H 2 adsorption performance of ALF over the 77 K to 296 K temperature range using gas isotherms, in situ neutron powder diffraction, and DFT calculations, as well as technoeconomic analysis (TEA), illustrating ALF’s competitive performance for long-duration storage versus compressed hydrogen and leading metal–organic frameworks. In the TEA, it is shown that ALF’s storage capacity, when combined with a temperature/pressure swing process, has advantages versus compressed H 2 at a fraction of the pressure (15 bar versus 350 bar). In conclusion, given ALF’s performance in the 10 bar to 20 bar regime under moderate cooling, it is particularly promising for use in safe storage systems serving fuel cells.

08 HYDROGEN↗
DOE OSTI2020

Demonstration of a 2 ps, 5 TW peak power, long-wave infrared laser based on chirped-pulse amplification with mixed-isotope CO 2 amplifiers 2 amplifiers

We report generation of 5 TW peak power in a 2 ps pulse at 9.2 µm via chirped-pulse amplification (CPA) in mixed-isotope high-pressure CO 2 laser amplifiers. This represents the highest peak power in a single picosecond pulse format and the shortest pulse at terawatt peak power ever achieved in the long-wave infrared (LWIR) spectral range. Maximum demonstrated energy of the compressed pulse is 14 J and minimum period between shots is 20 s. The successful implementation of the chirped pulse amplification technique in a short-pulse gas laser opens a route to development of LWIR laser facilities with tens of terawatts of peak power, thus approaching the number of photons per optical cycle of current near-infrared laser systems based on solid-state active media.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Technoeconomic Analysis of Steel Production with Electric Thermal Energy Storage

The iron and steel industry is an important manufacturing sector and one of the largest energy consumers in the United States and globally. Hydrogen direct reduction of iron ore (H2DRI) is considered a promising process that could enhance domestic steel production. This process requires hydrogen inlet temperatures up to 950 degrees C to drive the endothermic reduction of the iron ore pellets. In this work we investigate the technoeconomic performance of an H2DRI plant using electric thermal energy storage (ETES) technologies for the hydrogen heating, compared to conventional natural gas fired heaters, hydrogen fired heaters, and electric hydrogen heaters. A technoeconomic analysis framework for the plant is developed and used in multiple case studies, covering different hydrogen prices, grid electricity profiles, and financing scenarios. The levelized cost of steel production is found out to be in the range of $775-950/mt, which is mostly inside the benchmarked steel price of $941/mt. ETES-based hydrogen heating is found to be in par with conventional natural gas fired heaters, and cheaper than hydrogen fired heaters and electric hydrogen heaters. The major cost drivers are the iron ore and hydrogen feedstock, followed by the hydrogen compression and heating capital. Several insights and suggested future directions are identified.

08 HYDROGEN↗
DOE OSTI2022

Belowground respiration, root traits, and soil characteristics of an East Tennessee deciduous forest, 2019-2020

This dataset contains empirical physiological, morphological, and chemical data of root systems, and elemental, nutrient content for soils collected on forty individuals of eight temperate tree species, between June 2019 and July 2020 at The University of Tennessee Forest Research Center and Arboretum in Oak Ridge, Tennessee. The project used a novel methodology to empirically derive estimates of the autotrophic and heterotrophic components of soil respiration in-situ. The project consists of two measurement approaches. The first set of measurements uses a standard approach for measuring specific root respiration on excised root systems. The second used “in-situ root trays” This dataset includes 10 data files in comma separate (*.csv) ASCII format. Data include measurements of leaf and root functional traits for excised root systems and for living root systems housed within in-situ root trays, data on soil carbon and nitrogen pools, in-situ measurements of soil moisture and temperature, data on soil respiration rates for in-situ root trays (both as soil mass-based fluxes, and soil-area based fluxes), and data on the geographic coordinates and tree sizes of study trees. Forty study trees of eight temperate tree species were studied (five individuals per species). Two in-situ root trays were installed per species, each housing one entire root system comprising < 3 root orders, and still being attached to the tree via transportive root. All respiration measurements were conducted with the Li-6800 portable photosynthesis system (Li-COR, Lincoln, NE, USA). Root respiration measurements of excised root tissues were made using the Li-6800 and the Walz 3010-GWK1 gas exchange chamber (Heinz Walz GmbH, Effeltrich, Germany). Root scan images were analyzed using WinRHIZO. These images are companion files to this dataset and are contained in two compressed (*.zip) folders. Additional metadata are provided: 10 data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

EARTH SCIENCE > BIOSPHERE > VEGETATION > LEAF CHAR↗
DOE OSTI2020

Knock Mitigation Effectiveness of EGR across the Pressure-Temperature Domain

Exhaust gas recirculation (EGR) has been shown to enable efficiency improvements in SI engines through multiple different mechanisms, including decreasing the knock propensity at high load, which allows higher compression ratio. While many of the benefits of EGR are applicable to both low and high power density engines, including reductions in pumping work and improved specific heat ratio, the knock benefits and corresponding compression ratio increases have been limited to low power density naturally aspirated engines primarily intended for hybrid vehicle architectures. An earlier study [1] indicated that there may be a kinetic limitation for the ability of EGR to mitigate knock under these conditions, but that study only considered a small number of conditions. In this investigation, we expand on that study while also providing data for model validation for the new light-duty combustion consortium from the U.S. Department of Energy: Partnership for Advancing Combustion Engines (PACE). In this investigation, the effectiveness of EGR to mitigate knock is studied with regards to the effect of engine speed (1,500 and 3,000 rpm), changing trajectory in the pressure-temperature domain by varying the intake manifold temperature (35, 60, and 90 deg C), and by considering the effect of minor species by studying the effect of untreated EGR vs. EGR that has been treated by an automotive three-way catalyst. Additionally, to increase the relevance of these data for future modeling studies, the performance of the full boiling range gasoline was compared relative to a surrogate formulation. The study found that the fuel surrogate performs well, confirmed the kinetic limitations of EGR to mitigate knock under boost, and showed improvements in EGR performance with catalyzed EGR.

42 ENGINEERING↗
DOE OSTI2024

Method and system for electrochemically compressing gaseous hydrogen

Method and system for electrochemically compressing hydrogen. In one embodiment, the system includes a membrane electrode assembly (MEA) that includes a polymer electrolyte membrane (PEM), an anode, and a cathode. First and second gas diffusion media are positioned adjacent the cathode and anode, respectively. A humidifying membrane is positioned next to the second gas diffusion medium on a side opposite the anode. A water supply is connected to the humidifying membrane, and a hydrogen gas supply is connected to the second gas diffusion medium. A hydrogen gas collector including a back pressure regulator is connected to the first gas diffusion medium. Separators, positioned on opposite sides of the MEA, are connected to a power source. In use, hydrogen is electrochemically pumped across the MEA and collected in the hydrogen gas collector. The PEM is kept properly humidified by the humidifying membrane, which releases water into the second gas diffusion medium.

Hamdan, Monjid↗
DOE OSTI2026

Leafweb: Leaf Gas Exchange and Pulse-Amplitude Modulated Fluorometry for C4 Species, June 2026 Release

This dataset contains leaf gas exchange and Pulse-Amplitude Modulated (PAM) fluorometry for 98 C4 species. The C4 photosynthetic pathway employs specialized CO2 concentration mechanisms and Kranz anatomy to enrich CO2 concentration around Rubisco, the enzyme that catalyzes carbon fixation in the Calvin-Benson cycle to suppress photorespiration and increase the use efficiencies of light, nitrogen, and water as compared to the C3 photosynthetic pathways. Large-scale C4 photosynthetic datasets are relatively scarce, which has affected C4 photosynthesis research. To improve C4 photosynthetic data availability, Leafweb organized an effort to systematically collect, compile, standardize, and organize measurements of leaf gas exchange and/or Pulse-Amplitude Modulated (PAM) fluorometry of C4 species. This derived a C4 photosynthetic dataset containing measurements made by independent researchers in multiple countries in various environments (field, garden, or greenhouse). It covers three biochemical subtypes – the nicotinamide adenine dinucleotide phosphate-malic enzyme (NADP-ME), nicotinamide adenine dinucleotide-malic enzyme (NAD-ME), and phosphoenolpyruvate carboxykinase (PEP-CK) subtypes. This dataset is useful for using Artificial Intelligence / Machine Learning and mechanistic models to study C4 photosynthesis and compare across different biochemical subtypes. This dataset contains 3 compressed (*.zip) folders containing 1,892 data files in comma-separate values (*.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma-separate values (*.csv) format and a user guide in PDF (*.pdf) format.

Zhou, Haoran [Tianjin University, China]↗
DOE OSTI2022

Spark-Assisted HCCI Residential CHP

A transformative small spark ignition (SI) internal combustion (IC) engine fueled with natural gas was developed for combined heat and power (CHP) applications using a combination of cycle simulations, computational fluid dynamics (CFD) modeling, and engine experiments. The resulting 1 kW CHP engine was demonstrated to achieve 36.1% brake thermal efficiency (BTE) while meeting aggressive exhaust emissions targets using a low-cost three-way catalyst. Starting from a “clean-sheet” design, modeling tools were used to select the optimal engine parameters and operating characteristics. The disruptive technologies developed for the CHP system have a target lifetime of at least 10 years. The engine cost at volume of 10,000 units was estimated to be $\$$1,050. A combination of experimental and simulation results were used to identify a path to the program target of 38.6% BTE. Base engine design parameters (i.e., displacement, speed, bore, stroke, valve timings, and compression ratio) were optimized to reduce friction, heat transfer, and exhaust losses. The base clean sheet prototype engine achieved 32% BTE. Optimization of the lube oil and coolant temperatures added 1.8% BTE. The addition of exhaust gas recirculation added 1.1% BTE. Novel thermal barrier coatings (TBCs) developed over the course of the project added 1.2% BTE. Further improvements in engine friction reduction (1.3% BTE) and improved combustion (1.2% BTE) are estimated to meet the program target 38.6% BTE, while also meeting the stringent criteria pollutant emissions targets.

42 ENGINEERING↗
DOE OSTI2021

Direct Numerical Simulation of hydrogen combustion at auto-ignitive conditions: Ignition, stability and turbulent reaction-front velocity

Direct Numerical Simulations (DNS) are performed to investigate the process of spontaneous ignition of hydrogen flames at laminar, turbulent, adiabatic and non-adiabatic conditions. Mixtures of hydrogen and vitiated air at temperatures representing gas-turbine reheat combustion are considered. Adiabatic spontaneous ignition processes are investigated first, providing a quantitative characterization of stable and unstable flames. Results indicate that, in hydrogen reheat combustion, compressibility effects play a key role in flame stability and that unstable ignition and combustion are consistently encountered for reactant temperatures close to the mixture’s characteristic crossover temperature. Furthermore, it is also found that the characterization of the adiabatic processes is also valid in the presence of non-adiabaticity due to wall heat-loss. Finally, a quantitative characterization of the instantaneous fuel consumption rate within the reaction front is obtained and of its ability, at auto-ignitive conditions, to advance against the approaching turbulent flow of the reactants, for a range of different turbulence intensities, temperatures and pressure levels.

42 ENGINEERING↗
DOE OSTI2022

Impact of Fuel Properties on the Combustion of Late Post Injections used for Aftertreatment Thermal Management

Typical calibration for catalyst thermal management for compression-ignition engines involves delaying the post-injection into the expansion stroke. Reduced work extraction due to the late heat release event is used to increase the exhaust gas temperature to shorten the time associated with reaching optimal temperatures for aftertreatment systems. Shorter catalyst heat-up time can simultaneously reduce tail-pipe emissions and the typical fuel penalties associated with this mode of operation. In this study, the effects of volatility, reactivity, and oxygen content of the fuel on combustion stability and emissions were studied in a light-duty single-cylinder research engine. Blends of iso-octane/ n-heptane and farnesane/ 2,2,4,4,6,8,8-heptamethylnonane were used to study the impacts of volatility and reactivity. At constant reactivity, little to no variation in combustion performance was observed due to differences in volatility. On the other hand, increased reactivity improved combustion stability and efficiency at late injection timings (+24 CAD). The combined effect of increase in chemical reactivity and oxygen content was analysed by comparing the baseline #2 diesel operation with two blends of mono-ethers and #2 diesel to achieve cetane numbers (CNs) of 45 and 55, and a pure blend of mono-ether components with CN > 100. Fuels with higher reactivity and oxygen content were found to reduce engine-out hydrocarbon and carbon mono-oxide emissions while also achieving stable combustion at post-injection timings later than those achievable with diesel fuel. The pure ether-blend had the latest achievable post-injection timing (≥+26 CAD) while still maintaining stable combustion. At similar combustion stability, the pure ether blend was found to have 2.8% higher combustion efficiency and 4.3% higher thermal efficiency than the baseline diesel. The ether-diesel blends at CN45 and CN55 were found to have 1.8% higher combustion efficiency than baseline diesel. The results demonstrate that fuels with increased reactivity can increase combustion efficiency, reducing carbon monoxide and hydrocarbon emissions, while maintaining similar exhaust temperature and combustion stability compared to baseline diesel. Further greenhouse gas benefits can also be realized as the mono-ether bioblendstocks show potential for >50% reduction in greenhouse gas emissions relative to diesel fuel based on their production method.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Simulations of the shock-driven Kelvin–Helmholtz instability in inclined gas curtains

In this paper, we present simulation results for the two-dimensional, shock-driven Kelvin–Helmholtz instability. Simulations are performed with a Mach 2.0 shock propagating through a finite-thickness curtain of gas inclined at an angle α0=30° with respect to the shock plane. After the passage of the shock, the gas curtain is accelerated along its axis. A perturbation develops due to shock reflection near the lower wall, and a Kelvin–Helmholtz instability forms near the vertical center of the curtain. This is the first known numerical reproduction of these phenomena that have previously been observed in experiments with an inclined cylindrical gas column. The effects of varying Mach number and column width were explored in detail to complement experimental data. Additionally, the dependence of the Kelvin–Helmholtz wavelength on Mach number closely matches the relationship observed in experiments. This supports the notion that the observed instability is effectively two-dimensional and inviscid (like classical Kelvin–Helmholtz). The growth rate of the perturbations in the gas curtain was also found to be similar for different Mach numbers. The perturbation at the curtain foot, previously unreported in experiments, was found to have a similar relationship to Mach number as the Kelvin–Helmholtz instability. Both perturbation wavelengths are found to be proportional to layer width. Simulations were performed with the fast interfaces and transport in the atmosphere, an exascale ready, graphics processing unit-accelerated compressible flow solver developed at the University of New Mexico.

42 ENGINEERING↗
DOE OSTI2021

Exploring the Effects of Piston Bowl Geometry and Injector Included Angle on Dual-Fuel and Single-Fuel RCCI

Abstract Reactivity control compression ignition (RCCI) is a low-temperature combustion technique that has been proposed to meet the current demand for high thermal efficiency and low engine-out emissions. However, its requirement of two separate fuel systems (i.e., a low-reactivity fuel system and a high-reactivity fuel system) has been one of its major challenges in the last decade. This leads to the single-fuel RCCI concept, where the secondary fuel (reformates of diesel) is generated from the primary fuel (diesel) through catalytic partial oxidation reformation. Following the in-depth analysis of the reformate fuel (reformates of diesel) and its benefit as the low-reactivity fuel with diesel, the effects of the start of injection (SOI) timing of diesel and the energy-based blend ratio were also studied in detail. In this study, the effects of piston profile and the injector included angles were experimentally examined using both conventional fuel pairs (gasoline—diesel and natural gas—diesel) and reformate RCCI. A validated computational fluid dynamics (CFD) model was also used for a better understanding of the experimental trends. Comparing a reentrant bowl piston with a shallow bowl piston at a constant compression ratio and SOI, the latter showed better thermal efficiency, regardless of the fuel combination, due to its 10% lower surface area for the heat transfer. Comparing the 150-degree included angle and 60-degree included angle on the shallow bowl piston, the latter showed better combustion efficiency, regardless of the fuel combination, due to its earlier combustion phasing (at constant SOI timing). The effect was particularly prominent on reformate RCCI because of its incredibly high diluent concentration, which retards the combustion further for the 150-deg injector. Later, using convergecfd, seven different injector included angles were studied at a constant SOI. With the change in injector included angle, the region of the cylinder targeted by the fuel spray varies significantly, and it was found to have a significant impact on the combustion efficiency and the engine-out emissions. As the injector included angle changed from 60-deg to 150-deg, the combustion efficiency increased by 15% and the CO, NOx, and HC emissions decreased by 96%, 70%, and 86%, respectively.

Engineering↗
DOE OSTI2020

High BMEP and High Efficiency Micro-Pilot Ignition Natural Gas Engine (Final Project Report)

The project objectives were to develop demonstrate a high-efficiency high-output natural gas diesel micro-pilot stoichiometric engine operating with diesel pilot contribution of less than 5% on a medium duty engine. The program’s outcomes achieve in a partnership between Michigan Technological University and Westport Power Inc. were very successful. The engine platform was a 6.7L I6 engine with a compression ratio of 15:1 and achieved 24 bar BMEP and 41% brake thermal efficiency at lambda. Simulation and modeling with an improved turbocharger and combustion chamber improvements demonstrated a clear path to 43% BTE. The operational stoichiometric range was from 5 to 24 bar with minimal throttling. Diesel contribution over the cycle was 4.6%. The results achieved in this program are well above the best in-class baseline natural gas spark ignition engines of 19.5 bar BMEP and 40% BTE.

33 ADVANCED PROPULSION SYSTEMS↗