SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fewer attendances for radiation therapy results in increased efficiency and less foot traffic within a radiation therapy department. We investigated outcomes after single-fraction (SF) stereotactic body radiation therapy (SBRT) in patients with oligometastatic disease.
As part of the American Association of Physicists in Medicine Working Group on Stereotactic Body Radiotherapy, tumor control probability (TCP) after stereotactic radiosurgery (SRS) and fractionated stereotactic radiosurgery (fSRS) for brain metastases was modeled based on pooled dosimetric and clinical data from published English-language literature.
We report long-term outcomes from our phase 1 dose-escalation study to determine the maximum tolerated dose of single-fraction liver SABR pooled with our subsequent single institutional experience with patients treated postprotocol at the highest dose level (40 Gy) established from the phase 1 study.
To report long-term outcome of fractionated stereotactic body radiation therapy (SBRT) for painful spinal metastases.
Our purpose was to evaluate cosmetic changes after 5-fraction adjuvant stereotactic partial breast irradiation (S-PBI).
To assess the toxicity profile of prostate cancer stereotactic body radiation therapy (SBRT) in 3 fractions.
There are limited prospective data on predictors of patient-reported outcomes (PROs) after whole-breast irradiation (WBI) plus a boost. We sought to characterize longitudinal PROs and cosmesis in a randomized trial comparing conventionally fractionated (CF) versus hypofractionated (HF) WBI.
To review 10 years of using single-fraction lung stereotactic body radiation therapy (SF-SBRT) for medically inoperable peripheral early-stage lung cancer.
Despite major technical advances in hippocampus-sparing radiation therapy, radiation-induced injury to the neural stem cell compartment may affect neurocognitive functions. In the brain, glial cells modulate neuronal functions and are major mediators of neuroinflammation. In a preclinical mouse model with fractionated low-dose radiation (LDR), the complex response to radiation-induced injury was analyzed in the hippocampal stem cell compartment over a period of 6 months.
We report on our early experience of our prospective multicenter phase 1 dose- escalation study of single-fraction stereotactic partial breast irradiation (S-PBI) for early stage breast cancer after partial mastectomy using a robotic stereotactic radiation system.
Non-planar growth of Al x Ga 1-x N epitaxial layers with an average alloy composition up to Al-mole-fraction of x ~ 0.21 was performed on patterned c-plane GaN on (0001) sapphire substrates with stripe-shaped mesa structures. This approach successfully realized the growth of crack-free AlGaN layers on the top of mesas with layer thicknesses greater than the expected critical layer thickness by relaxing the in-plane stress on the top of the mesa. The effectiveness of the relaxation strongly depends on the width and depth of the stripe mesa. In conclusion, the relaxation of in-plane stress and resultant suppression of cracks in AlGaN layer are qualitatively discussed.
Here for the first time reported, a flow-through multi-fixed bed immobilized amine/silica sorbent strategy was employed to fractionate purified critical metals from authentic acid mine drainage (AMD). The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory’s (NETL) patent-pending Multi-functional Sorbent Technology (MUST) sorbents were used to recover critical metals from AMD at the Pittsburgh Botanic Garden (Pittsburgh, PA USA). By adjusting the AMD/sorbent ratio, we recovered > 80% of pure adsorbed Mn (by adsorbed metal weight) and >90% pure adsorbed Al at lab-scale. Further optimizing the weight hourly space velocity (WHSV) enhanced the rate of adsorbed Al recovery by over five times, justifying a field site test. After treating >100 L of AMD at the field site, the optimized polyamine/epoxysilane/aminosilane sorbent recovered approximately 0.7 wt% adsorbed Al at > 90% purity. A tangible amount of purified aluminum hydroxide [Al(OH) 3 ] and aluminum sulfate [Al 2 (SO 4 ) 3 ] solids were then recovered after eluting and precipitating the previously adsorbed metals.
Fractional free volume (FFV) characterizes the microstructural level features of polymers and affects their properties including thermal, mechanical, and separation performance. Experimental measurements and theoretical analyses have been used to quantify the FFV of polymers, but challenges remain because of their limitations. Experimental measurements are laborious and based on semi empirical equations, while Bondi’s group contribution theory involves ambiguities like the determination of van der Waals volume and the choice of factor values in the theoretical equation. To efficiently evaluate the FFV of polymers, this study utilizes high-throughput molecular dynamics (MD) simulations to build a large dataset regarding polymer’s FFV. Based on this large dataset, we further build machine learning (ML) models to establish the composition-structure relation. Inspired by group contribution theory which correlates polymer’s functional groups to FFV, our ML models correlate polymer’s substructures or physico-chemical indexes to FFV. Here, our study first benchmarks the MD simulation protocol to obtain reliable FFV of polymers and then carries out high-throughput MD simulations for more than 6,500 homopolymers and 1,400 polyamides. Such a large and diverse dataset makes the well-trained ML models more generalizable, compared with the group contribution theory. The efficiency of a feed forward neural network model is further demonstrated by applying it to a hypothetical polyimide dataset of more than 8 million chemical structures. The predicted FFVs of hypothetical polyimides are further validated by MD simulations. The obtained FFVs of the 8 million polymers, plus their previously reported gas separation performances, demonstrate the promising capability of ML virtual screening for the discovery of polymer membranes with exceptional permeability/selectivity.
Over the years several rare-event search experiments have shown increasing interest to search for Fractionally Charged Particles (FCPs) within the data acquired in those experiments. This, in turn, has required the need for a framework to calculate accurately the energy loss expected from FCPs as they pass through the detector material. We have developed Monte Carlo methods within Geant4 to simulate for the first time energy loss of FCPs through different physics processes. The program can be used to calculate energy deposition distributions, a major component of any FCP search analysis, as they interact with detector material. We discuss the implementation and validation of the energy loss of FCPs using a typical detector material.
The most precise measurement to date of the W boson hadronic decay branching fraction ratio $R_{c}^{W} = \mathcal{B}(W \to cq) / \mathcal{B}(W \to q\bar{q}$) is presented. The measurement is based on a sample of proton-proton collision data from the CERN LHC collected by the CMS experiment at a center-of-mass energy of 13 TeV in 2016-2018 with an integrated luminosity of 138 fb$^{-1}$. The large cross section of top quark-antiquark production at the LHC offers a sizable high-purity sample of W bosons suitable for this measurement. Events with one charged lepton (electron or muon) and at least four jets, two tagged as bottom quark jets, are analyzed. Charm jets are tagged using the presence of a muon inside the jet. The result, $R_\mathrm{c}^\mathrm{W}$ = 0.489 $\pm$ 0.020, is consistent with the standard model prediction and is twice as precise as the current world-average value.
Partial differential equations (PDEs) are used with huge success to model phenomena across all scientific and engineering disciplines. However, across an equally wide swath, there exist situations in which PDEs fail to adequately model observed phenomena, or are not the best available model for that purpose. On the other hand, in many situations, nonlocal models that account for interaction occurring at a distance have been shown to more faithfully and effectively model observed phenomena that involve possible singularities and other anomalies. Here, we consider a generic nonlocal model, beginning with a short review of its definition, the properties of its solution, its mathematical analysis and of specific concrete examples. We then provide extensive discussions about numerical methods, including finite element, finite difference and spectral methods, for determining approximate solutions of the nonlocal models considered. In that discussion, we pay particular attention to a special class of nonlocal models that are the most widely studied in the literature, namely those involving fractional derivatives. The article ends with brief considerations of several modelling and algorithmic extensions, which serve to show the wide applicability of nonlocal modelling.
Here, this paper reports the co-hydrotreatment of Biomass Technology Group commercial pyrolysis oil water-insoluble (WIS) phase (also known as pyrolytic lignin) and yellow greases (waste cooking oil), aiming to produce sustainable aviation fuels (SAFs). We use a sulfided NiMo/Al 2 O 3 blend with 16 wt % WIS and a central composite experimental design to identify processing conditions increasing kerosene yield and reducing coke formation. The input variables were: (1) reaction temperature (320, 350, and 380 °C), (2) initial hydrogen pressure (5, 6, and 7 MPa), and (3) amount of catalyst (0.7, 1.0, and 1.3 g). The hydrotreated oily phases were distilled to obtain gasoline (<150 °C), kerosene (150–250 °C), diesel (250–350 °C), and residual oil (>350 °C). The reaction temperature is the main factor affecting the yield of gaseous, solid, and liquid products. Meanwhile, a higher initial hydrogen pressure and catalyst loading increased the yield of kerosene and other distillates and decreased the coke formation. A high temperature correlated with a lower content of oxygenates in kerosene cuts. Based on our experimental results, we propose to conduct hydrotreatment studies at 380 °C, initial H 2 pressure of 7 MPa, and 1.3 g of catalyst. Under the identified conditions, it was possible to improve the kerosene yield to more than 20 wt % and reduce the yield of coke to close to 2.0 wt %. The chemical composition and fuel properties of the gasoline, kerosene, and diesel cuts were thoroughly analyzed. The content of aromatics and phenols in the kerosene fraction produced at the conditions identified in this project exceeded the recommended values for SAFs. New strategies (such as blending and more intense hydrotreatment to remove oxygenated compounds) need to be implemented to reduce the content of these molecules in our final product.
The alanine transaminase enzyme catalyzes the transfer of an amino group from alanine to α-ketoglutarate to produce pyruvate and glutamate. Isotope fractionation factors (IFFs) for the reaction +H 3 NCH(CH 3 )COO – + – OOCCH 2 CH 2 C(O)COO – ↔ CH 3 C(O)COO – + + H 3 NCH(CH 2 CH 2 COO – )COO – (zwitterionic neutral alanine + doubly deprotonated α-ketoglutarate ↔ pyruvate + zwitterionic glutamate anion) were calculated from the partition functions of explicitly and implicitly solvated molecules at 298 K. Calculations were done for alanine (noncharge separated, zwitterion, deprotonated), pyruvic acid (neutral, deprotonated), glutamic acid (noncharge separated, zwitterion, deprotonated, doubly deprotonated), and α-ketoglutaric acid (neutral, deprotonated, doubly deprotonated). The computational results, calculated from gas phase- and aqueous-optimized clusters with explicit H 2 O molecules at the MP2/aug-cc-pVDZ and MP2/aug-cc-pVDZ/COSMO levels, respectively, predict that substitution of 13 C at the C2 position of alanine and pyruvic acid and their various forms leads to the C2 position of pyruvic acid/pyruvate being enriched in 13 C/ 12 C ratio by 9‰. Simpler approaches that estimate the IFFs based solely on changes in the zero-point energies (ZPEs) are consistent with the higher-level model. ZPE-based IFFs calculated for simple analogues formaldehyde and methylamine (analogous to the C2 positions of pyruvate and alanine, respectively) predict a 13 C enrichment in formaldehyde of 7–8‰ at the MP2/aug-cc-pVDZ and aug-cc-pVTZ levels. A simple predictive model using canonical functional group frequencies and reduced masses for 13 C exchange between R 2 C=O and R 2 CH–NH 2 predicted enrichment in R 2 C=O that is too large by a factor of two but is qualitatively accurate compared with the more sophisticated models. Our models are all in agreement with the expectation that pyruvate and formaldehyde will be preferentially enriched in 13 C because of the strength of their >C=O bond relative to that of ≡C–NH 2 in alanine and methylamine. 13 C/ 12 C substitution is also modeled at the methyl and carboxylic acid sites of alanine and pyruvic acid, respectively.