Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow field”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Experimental surface flow patterns and flow-field phenomena of a delta-wing space-shuttle orbiter

Composite photographs of the surface flow and shadowgraphs of the shock wave pattern are presented that depict the hypersonic flow field of a typical delta wing space shuttle orbiter. Results from a wind tunnel test in air are given in side, oblique, and projected plan views for angles of attack from 0 to 60 deg. The tests were conducted at a Mach number of 7.4 and for Reynolds numbers based on body length of 6,000,000 and 9,000,000. The interrelationship is shown for the intersecting bow and wing leading edge waves with the surface flow for angles of attack for which: (1) the leading edge wave is attached, and (2) the leading edge wave is detached.

Cleary, J. W.↗
DOE OSTI2021

Evaluating the Influence of Rotor-Casing Eccentricity on Turbine Efficiency Including Time-Resolved Flow Field Measurements

Abstract The clearance that exists between the casing and turbine blade tips is one of the key drivers of efficiency in gas turbine engines. For this reason, engine manufacturers utilize precise manufacturing techniques and may use clearance control systems to minimize tip clearances to reduce associated losses. Despite these efforts, turbines typically exhibit some nominal casing ovality or rotor-casing eccentricity, and changes to blade tip clearance during operation commonly occur due to thermal and mechanical stresses. The present study investigates non-axisymmetric tip clearance effects by creating a rotor-casing eccentricity in a one-stage axial test turbine operating in a continuous-duration mode at engine-relevant conditions with engine representative hardware. A magnetic levitation bearing system was leveraged to move the turbine shaft to vary the rotor-casing eccentricity without test section disassembly. The results of this study indicate that rotor-casing eccentricity does not affect overall turbine efficiency over the range that was tested, but does locally influence efficiency and the rotor exit flow field. Comparisons of flow angle and secondary flow kinetic energy (SKE) agreed with previous studies and existing analytical methods, respectively. Collectively, these results indicate that tip clearance can be studied locally on an eccentric rotor.

Engineering↗
NASA NTRS1989

Modeling of high speed chemically reacting flow-fields

The SPARK3D and SPARK3D-PNS computer programs were developed to model 3-D supersonic, chemically reacting flow-fields. The SPARK3D code is a full Navier-Stokes solver, and is suitable for use in scramjet combustors and other regions where recirculation may be present. The SPARK3D-PNS is a parabolized Navier-Stokes solver and provides an efficient means of calculating steady-state combustor far-fields and nozzles. Each code has a generalized chemistry package, making modeling of any chemically reacting flow possible. Research activities by the Langley group range from addressing fundamental theoretical issues to simulating problems of practical importance. Algorithmic development includes work on higher order and upwind spatial difference schemes. Direct numerical simulations employ these algorithms to address the fundamental issues of flow stability and transition, and the chemical reaction of supersonic mixing layers and jets. It is believed that this work will lend greater insight into phenomenological model development for simulating supersonic chemically reacting flows in practical combustors. Currently, the SPARK3D and SPARK3D-PNS codes are used to study problems of engineering interest, including various injector designs and 3-D combustor-nozzle configurations. Examples, which demonstrate the capabilities of each code are presented.

Drummond, J. P.↗
NASA NTRS1984

Analyzing Flow Fields in Axial-Compressor Rotors and Stators

Computer program, BLADE3D, developed for analysis of inviscid threedimensional flow fields in single blade passage of axial-compressor rotor or stator. Applicable to arbitrary axial-compressor hub, tip, and blade geometries, including blades with part-span dampers. Also used for axial turbines but with lowered resolution of flows about blunt leading and trailing edges. Analysis method valid for subsonic, transonic and supersonic flows, including choked flows.

Thompkins, W. J., Jr.↗
NASA NTRS1986

Numerical simulation of the flow field around a complete aircraft

The present effort represents a first attempt of numerical simulation of the flow field around a complete aircraft-like, lifting configuration utilizing the Reynolds averaged Navier-Stokes equations. The numerical solution generated for the experimental aircraft concept X24C-10D at a Mach number of 5.95 not only exhibited accurate prediction of detailed flow properties but also of the integrated aerodynamic coefficients. In addition, the present analysis demonstrated that a page structure of data collected into cyclic blocks is an efficient and viable means for processing the Navier-Stokes equations on the CRAY XMP-22 computer with external memory device.

Shang, J. S.↗
NASA NTRS1985

Theoretical and experimental flow fields for a supersonic cruise fighter forebody

The capability of two numerical methods to predict the flow field about a representative supersonic cruise aircraft was examined. The two codes were a small-disturbance transonic program of Boppe and a conservative form full-potential transonic program of Shankar and Szema. For the former code, comparisons were made with wind-tunnel data at Mach numbers of 0.6, 0.9, and 1.2 and angles of attack of 0 deg, 5 deg, and 10 deg (7.5 deg instead of 10 deg at a Mach number of 1.2). Predictions from the two codes were compared at a Mach number of 1.2 and an angle of attack of 7.5 deg. The comparison criteria were contours of local angle of attack, local angle of sideslip, and local Mach number. The comparisons indicated that both codes may be considered useful for design applications, depending on the degree of accuracy required by the user's solution. Both solutions show an inaccuracy in their predictions, particularly as Mach number and/or angle of attack increases, because of their lack of viscous effects and any mechanisms to predict vortex development.

Yaros, S. F.↗
NASA NTRS1987

Particle and flow field holography: A critical survey

A brief background is provided for the fields of particle and flow visualization holography. A summary of methods currently in use is given, followed by a discussion of more recent and unique applications. The problem of data reduction is discussed. A state of the art summary is then provided with a prognosis of the future of the field. Particle and flow visualization holography are characterized as powerful tools currently in wide use and with significant untapped potential.

Trolinger, James D.↗
NASA NTRS1990

Nature of convection-stabilized dc arcs in dual-flow nozzle geometry. I - The cold flow field and dc arc characteristics. II - Optical diagnostics and theory

Steady-state low-current air arcs in a dual-flow nozzle system are studied experimentally. The cold flow field with no arc is investigated using a 12.7-mm diameter dual-flow nozzle in a steady-flow facility. Mach number and mass flux distributions are determined for various nozzle-pressure ratios and nozzle-gap spacing. It is found that the shock waves in the converging-diverging nozzles result in a decrease in overal resistance by about 15 percent. Also, Schlieren and differential interferometry techniques are used to visualize the density gradients within the arc plasma and thermal mantle. Both optical techniques reveal a laminar arc structure for a reservoir pressure of 1 atm at various current levels. Experimentally determined axial static pressure and cold-flow mass flux rate distributions and a channel-flow model with constant arc temperatre are used to solve the energy integral for the arc radius as a function of axial distance. The arc electric field strength, voltage, resistance, and power are determined with Ohm's law and the total heat transfer is related to arc power.

Serbetci, Ilter↗
NASA NTRS1978

Some features of a wake tone flow field

An experimental investigation of a two-dimensional model of bluff body wake-surface interaction noise examines the changes in the flow field associated with changes in sound generated. Results show three distinct flow regimes separated by large differences in wake structure. In the first, with the surface in the near wake, discrete frequency sound is totally suppressed. At greater separation distances an amplified discrete frequency tone, a wake tone, is generated with the frequency a function of the separation distance. The final regime, with the surface in the far wake, is similar to a wake with no surface interaction.

Smith, C. A.↗
NASA NTRS1979

Calculation of the flow field in supersonic inlets using a bicharacteristics method with shock wave fitting

The results of weakly viscous flow analysis are presented. The flow field, including molecular transport, is computed with the aid of a bicharacteristic method. The bow shock wave and the internal shock wave are computed with the aid of a three-dimensional shock wave fitting procedure. Characteristic equations are presented, and numerical integration procedure is discussed. Here, an inverse marching scheme is employed in which the solution is obtained on space-like planes of constant x and on space curves defined by the intersections of the internal shock wave with the solid boundaries. The distance between solution planes is arrived at by the Courant-Friedrichs-Lewy stability criterion.

Vadyak, J.↗
NASA NTRS1984

Theoretical and experimental engine-inlet flow fields for fighter forebodies

The capability of two numerical methods, one for transonic and one for supersonic flows, to predict the flow fields about representative fighter aircraft forebodies in the vicinity of the engine inlets was examined. The Mach number range covered was 0.9 to 2.5 and the angle-of-attack range was 0 deg to 25 deg. The computer progams that implement each of the numerical methods are described as to their features and usage, and results are compared with comprehensive wind tunnel data. Although both prediction methods were inviscid, results show that the aerodynamic effects of the forebody, with and without a wing, can be simulated fairly well. Futher work is needed to include the effects of viscosity, including vortex shedding.

Yaros, S. F.↗
NASA NTRS1983

Flow fields and aerodynamic characteristics for hypersonic missiles with mid-fuselage inlets

A study was made to quantify forebody flow fields and to evaluate aerodynamic performance trends on a matrix of fuselage shapes for the mid-inlet/bolt-on-engine class of hypersonic airbreathing missiles for the Navy's vertical box launcher. The study indicated that inlet mass flow and pressure recovery can be increased by cambering the nose and increasing the width of the fuselage at both Mach 4 acceleration and Mach 6 cruise conditions. Aerodynamic trim predictions show that the drag at zero lift at Mach 4 decreases while the L/D max at Mach 6 increases with the nose camber, although these tendencies reverse with increasing width of maximum fuselage cross section.

Hunt, J. L.↗