SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Development of cavitation B-factors for helium, parahydrogen, nitrogen, fluorine, oxygen, refrigerant 114, and water is discussed. B-factor is defined and numerical relationships are established. Mathematical models are included and alternative methods of determining B-factor are explained.
A reliability design concept was developed for semistatic structures which combines the prevailing deterministic method with the first-order reliability method. The proposed method surmounts deterministic deficiencies in providing uniformly reliable structures and improved safety audits. It supports risk analyses and reliability selection criterion. The method provides a reliability design factor derived from the reliability criterion which is analogous to the current safety factor for sizing structures and verifying reliability response. The universal first-order reliability method should also be applicable for air and surface vehicles semistatic structures.
Background Brucellosis remains a significant health and economic challenge for livestock and humans globally. Despite its public health implications, the factors driving the endemic persistence ofBrucellaat the human-livestock interface in Tanzania remain poorly elucidated. This study aimed to identify the seroprevalence ofBrucellainfection in livestock and humans within a ranching system and determine associated risk factors for disease endemicity. Methods A cross-sectional sero-epidemiological study was conducted in 2023 in Tanzania’s Karagwe District, involving 725 livestock (cattle, goats, sheep) from 10 herds and 112 humans from associated camps. Seroprevalence was assessed using competitive ELISA while epidemiological data were collected via questionnaires. Generalized Linear Models and Contrast Analysis were used to identify risk factors for infection. Results Overall seroprevalence was 34% in livestock and 41% in humans. Goats exhibited the highest prevalence (69.2%), while cattle had the lowest (22.6%). Mixed-species herds (Odds Ratio, OR = 2.96, CI [1.90–4.60]) and small ruminants-only herds (OR = 6.54, CI [3.65–11.72]) showed a significantly higher risk of seropositivity compared to cattle-only herds. Older cattle (OR = 5.23, CI [2.70–10.10]) and lactating females (OR = 2.87, CI [1.78–4.63]) represented significant risks for brucellosis in livestock. In humans, close contact with animals (OR = 7.20, CI [1.97–36.31]) and handling animals during parturition or aborted fetuses (OR = 2.37, CI [1.01–5.58]) were significant risk factors. Notably, no spatial association was found in seroprevalence between herds and nearby human communities. Conclusion The lack of spatial correlation between livestock and human seroprevalence suggests complex transmission dynamics, potentially involving endemic circulation in livestock and human infections from multiple sources of exposure to livestock. This study highlights the need for comprehensive zoonotic risk education and targeted intervention strategies. Further research is crucial to elucidate transmission pathways and improveBrucellainfection control. This includes developing robust methods for identifying infective species and implementing effective strategies to mitigateBrucellainfection in endemic regions.
Conceptual designs of a fail-safe abort system for hydrogen fueled actively cooled high speed aircraft are examined. The fail-safe concept depends on basically three factors: (1) a reliable method of detecting a failure or malfunction in the active cooling system, (2) the optimization of abort trajectories which minimize the descent heat load to the aircraft, and (3) fail-safe thermostructural concepts to minimize both the weight and the maximum temperature the structure will reach during descent. These factors are examined and promising approaches are evaluated based on weight, reliability, ease of manufacture and cost.
Conceptual designs of a fail-safe abort system for hydrogen fueled actively cooled high speed aircraft are examined. The fail-safe concept depends on basically three factors: (1) a reliable method of detecting a failure or malfunction in the active cooling system, (2) the optimization of abort trajectories which minimize the descent heat load to the aircraft, and (3) fail-safe thermostructural concepts to minimize both the weight and the maximum temperature the structure will reach during descent. These factors are examined and promising approaches are evaluated based on weight, reliability, ease of manufacture and cost.
The duration of a mission--and subsequently, the minimum spacecraft lifetime--is a key component in designing the capabilities of a spacecraft during mission formulation. However, determining the duration is not simply a function of how long it will take the spacecraft to execute the activities needed to achieve mission objectives. Instead, the effects of the interaction between the spacecraft and ground operators must also be taken into account. This paper describes a method, using "operations efficiency factors", to account for these effects for Mars surface missions. Typically, this level of analysis has not been performed until much later in the mission development cycle, and has not been able to influence mission or spacecraft design. Further, the notion of moving to sustainable operations during Prime Mission--and the effect that change would have on operations productivity and mission objective choices--has not been encountered until the most recent rover missions (MSL, the (now-cancelled) joint NASA-ESA 2018 Mars rover, and the proposed rover for Mars 2020). Since MSL had a single control center and sun-synchronous relay assets (like MER), estimates of productivity derived from MER prime and extended missions were used. However, Mars 2018's anticipated complexity (there would have been control centers in California and Italy, and a non-sun-synchronous relay asset) required the development of an explicit model of operations efficiency that could handle these complexities. In the case of the proposed Mars 2018 mission, the model was employed to assess the mission return of competing operations concepts, and as an input to component lifetime requirements. In this paper we provide examples of how to calculate the operations efficiency factor for a given operational configuration, and how to apply the factors to surface mission scenarios. This model can be applied to future missions to enable early effective trades between operations design, science mission planning, and spacecraft design.
A multipoint method for determining acoustic impedance was evaluated in comparison with the traditional standing wave and two-microphone methods using 30 test samples covering the reflection factor magnitude range 0.004-0.999. The multipoint method is shown to combine the strengths of the standing wave and two-microphone methods while avoiding some of their inherent weaknesses. In particular, the results obtained suggest that the multipoint method will be less subject to flow induced random error than the two-microphone method in the presence of significant broadband noise levels associated with mean flow.
A research effort was initiated at Georgia Tech in February 1991 on the development of efficient techniques for the computation of 2-D and 3-D unsteady compressible flow problems. It was found that in 2-D unsteady viscous flow applications, the generalized minimal residual (GMRES) scheme was able to significantly improve the accuracy and stability characteristics of an existing 2-D ADI (Alternating Direction Implicit) time marching scheme. That is, the GMRES/ADI combination allowed 10 to 20 times larger time steps compared to an ADI scheme. Because the GMRES algorithm requires 5 to 10 times the CPU work compared to the ADI scheme, the combined GMRES/ADI scheme yields a net factor of 2 savings in CPU cost. During the past year, we also experimented with GMRES/multigrid/ADI combination. The purpose of this combination was to compute the low frequency components of the change in the flow properties from one time step to the next on a coarse grid. This strategy reduces the memory requirements of the GMRES method roughly by a factor of 4-8 for steady flow problems.
Various methods used for determining stress-intensity factors for cracked three-dimensional bodies are reviewed. The review is limited to the determination of mode-I stress-intensity factors. Some exact solutions for cracks in infinite solids are presented, and various approximate methods that have been used for the solution of the boundary-value problem of finite solids with cracks are addressed. The techniques used to extract the stress-intensity factors from these solutions are considered, and various methods used to calculate the stress-intensity factors for through-the-thickness cracks, semielliptical surface cracks, and quarter-elliptical corner cracks at holes are compared for the case of remote tensile loading.
A systematic and quantitative analysis is carried out to investigate the effects of the shape (point, cube, Gaussian) and size of the generation volume, the surface recombination velocity, and the diffusion length on the electron-beam-induced current (EBIC) and its derivative (DEIC). Thick homogeneously doped samples exhibiting diffusion lengths in the low micron and submicron range are considered. The results are presented in computed EBIC curves as a function of scanning distance and of the ratio true diffusion length/effective diffusion length. Shown using these curves are: (1) a simple and yet rigorous method for the determination of the true diffusion length, taking into consideration all of the factors cited above, (2) a method for the rapid determination of the surface recombination velocity, (3) the condition under which the source shape becomes insignificant, and (4) a new value for the lower limit of the diffusion length which can be determined by the EBOC technique.
The stress concentrations associated with circular notches and subjected to uniform tensile loading in woven ceramic matrix composites (CMCs) have been investigated for high-efficient turbine engine applications. The CMC's were composed of Nicalon silicon carbide woven fabric in SiNC matrix manufactured through polymer impregnation process (PIP). Several combinations of hole diameter/plate width ratios and ply orientations were considered in this study. In the first part, the stress concentrations were calculated measuring strain distributions surrounding the hole using strain gages at different locations of the specimens during the initial portion of the stress-strain curve before any microdamage developed. The stress concentration was also calculated analytically using Lekhnitskii's solution for orthotropic plates. A finite-width correction factor for anisotropic and orthotropic composite plate was considered. The stress distributions surrounding the circular hole of a CMC's plate were further studied using finite element analysis. Both solid and shell elements were considered. The experimental results were compared with both the analytical and finite element solutions. Extensive optical and scanning electron microscopic examinations were carried out for identifying the fracture behavior and failure mechanisms of both the notched and notched specimens. The stress concentration factors (SCF) determined by analytical method overpredicted the experimental results. But the numerical solution underpredicted the experimental SCF. Stress concentration factors are shown to increase with enlarged hole size and the effects of ply orientations on stress concentration factors are observed to be negligible. In all the cases, the crack initiated at the notch edge and propagated along the width towards the edge of the specimens.
We use the method of Lightcone Conformal Truncation (LCT) to obtain form factors and spectral densities of local operators $\mathcal{O}$ in $\phi^4$ theory in two dimensions. We show how to use the Hamiltonian eigenstates from LCT to obtain form factors that are matrix elements of a local operator $\mathcal{O}$ between single-particle bra and ket states, and we develop methods that significantly reduce errors resulting from the finite truncation of the Hilbert space. We extrapolate these form factors as a function of momentum to the regime where, by crossing symmetry, they are form factors of $\mathcal{O}$ between the vacuum and a two-particle asymptotic scattering state. We also compute the momentum-space time-ordered two-point functions of local operators in LCT. These converge quickly at momenta away from branch cuts, allowing us to indirectly obtain the time-ordered correlator and the spectral density at the branch cuts. We focus on the case where the local operator $\mathcal{O}$ is the trace Θ of the stress tensor.
Traditional human reliability analysis (HRA) methods have difficulty dealing with the dynamic nature of factors such as time and rely on static and expert-judgment-based assessments of performance-shaping factors (PSFs) across limited levels. In this study, we introduce a mathematical approach for dynamically evaluating the experience and training PSF. Our proposed method integrates the psychological concept of the “forgetting curve” to evaluate how PSFs are impacted by the number of trainings and the time elapsed since training. To confirm the validity of the model, we provide experimental data fitted by identifying the quantitative relationship between training and human performance. This research enables dynamic and objective assessments, thus reducing reliance on subjective expert judgment and improving the accuracy of HRA.
Big data transfer in large-scale scientific and business applications is increasingly carried out over connections with guaranteed bandwidth provisioned in High-performance Networks (HPNs) via advance bandwidth reservation. Provisioning agents need to carefully schedule data transfer requests, compute network paths, and allocate appropriate bandwidths. Such reserved bandwidths, if not fully utilized, could be simply wasted due to the exclusive access during the approved time window, and cause extra overhead and complexity for resource management. This calls for accurate performance prediction to reserve bandwidths that match actual needs and avoid over-provisioning. We employ machine learning algorithms to predict big data transfer performance based on extensive performance measurements collected in the past several years from data transfer tests using different protocols and toolkits between various end sites on several real-life physical or emulated testbeds. We first analyze the performance patterns in response to a comprehensive list of parameters in end-host systems, network connections, and data transfer applications, which motivate the use of machine learning and also help us identify the effects of latent factors. We then propose threshold- and clustering-based methods to eliminate negative effects of latent factors in data preprocessing and build a robust performance predictor based on customized domain-oriented loss functions. The performance of the proposed methods is verified by extensive experiments using SVR and RFR as well as theoretical analysis of the general performance bound.
Forecasting crop yields, or providing an expectation of ex-ante harvest amounts, is highly relevant to the whole agricultural production chain. Farmers can adapt their management, traders or insurers their pricing schemes, suppliers their stocks, logistic companies their routes, national authorities their food balance sheets to guide import or export and, finally, international aid organizations can mobilize reliefs. Evidence has grown in the literature that such forecasts with a meaningful lead time are possible on various geographic scales and for a broad range of crops. Here, we present a systematic review of the methods applied in end-of-season yield forecasting and three frequently used data sources: weather data, satellite data and crop masks. Our literature database comprises 362 studies (2004–2019) which were evaluated regarding methods, crops, regions, data sources, lead time and performance. Moreover, we present 24 sources of real-time and predictive weather data, 21 sources of remote sensing data and 16 crop masks. Yield forecasting in our literature sample has been performed for 44 crops in 71 countries, also including many non-staple crops, but with an apparent bias in regions and crops. Forecasting performance depends on various factors, including crop, region, method, lead time to harvest and input diversity. Our systematic review supports a broader application of locally successful approaches at larger scales by providing a comprehensive, accessible compendium of necessary information for yield forecasting. We discuss improvement potentials with respect to methodological approaches and available data sources. We additionally suggest standardization procedures for future forecasting studies and encourage studying additional crops and geographic regions. Implications of forecasts for different target groups on different scales and the adaptation towards climate change are also discussed.
With the rapid expansion of large-scale photovoltaic (PV) plants, it is paramount for solar stakeholders to understand the reliability and efficiency of their plants to inform maintenance decisions, increase production, and understand the design factors that impact performance. Diagnosing underperformance in PV plants is challenging due to the relatively few monitoring points with respect to the large geographic footprint of the plant. This work introduces a cutting-edge method that transforms the analysis and management of key factors influencing PV plant performance, including performance loss rate (PLR), recoverable soiling, and major system changes. Identifying these factors is critical for deriving actionable insights. Leveraging advanced analytical techniques such as wavelet transformation, robust regression, and extreme point analysis, this approach provides a nuanced understanding of these factors. This method has been tested across two synthetic datasets and one real dataset, consistently surpassing existing benchmarks by achieving a lower median mean absolute error and reduced error variability across all comparable components.
We consider a noninteracting many-fermion system populating levels of a unitary random matrix ensemble (equivalent to the q = 2 complex Sachdev-Ye-Kitaev model)—a generic model of single-particle quantum chaos. We study the corresponding many-particle level statistics by calculating the spectral form factor analytically using algebraic methods of random matrix theory, and match it with an exact numerical simulation. Despite the integrability of the theory, the many-body spectral rigidity is found to have a surprisingly rich landscape. In particular, we find a residual repulsion of distant many-body levels stemming from single-particle chaos, together with islands of level attraction. These results are encoded in an exponential ramp in the spectral form factor, which we show to be a universal feature of nonergodic many-fermion systems embedded in a chaotic medium.
This work studies the hydrodynamics of the seven pin wire-wrapped rod bundle in the sodium cartridge loop for the Versatile Test Reactor (VTR) through scaled water experiments and computational fluid dynamics (CFD) simulations. Here, the scaling analysis is first performed to demonstrate the hydrodynamic similarity between water and sodium flows at the same Reynolds number Re. A separate-effects test facility is designed and constructed based on the scaling analysis. Detailed experimental data on the pressure drop covering a wide range of Re values (1165 to 27 689) are obtained, which are used to evaluate existing correlations for friction factor and to benchmark CFD simulations. The experimentally determined friction factors f Exp agree well with the Upgraded Cheng and Todreas Detailed Correlation and Pacio-Chen-Todreas Detailed Model within ±7% but are significantly underpredicted by Rehme's correlation by 25%. Various CFD near-wall treatment methods are tested using ANSYS Fluent and evaluated by experimental data. It is found that when the recommended wall y + values are met, most of the near-wall treatment methods can give accurate friction factor predictions. The resolved near-wall method (y + ~ 1) with the Shear Stress Transport k - ω turbulence model and the scalable wall functions (y + > 12) with the realizable k - ε turbulence model can predict f Exp within ±5% The standard wall functions (y + > 30) and nonequilibrium wall functions (y + > 30) with the realizable k - ε model can predict f Exp within ±10%.