Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experience report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

ATS simultaneous and turnaround ranging experiments

This report explains the data reduction and spacecraft position determination used in conjunction with two ATS experiments - Trilateration and Turnaround Ranging - and describes in detail a multilateration program that is used for part of the data reduction process. The process described is for the determination of the inertial position of the satellite, and for formating input for related programs. In the trilateration procedure, a geometric determination of satellite position is made from near simultaneous range measurements made by three different tracking stations. Turnaround ranging involves two stations; one, the master station, transmits the signal to the satellite and the satellite retransmits the signal to the slave station which turns the signal around to the satellite which in turn retransmits the signal to the master station. The results of the satellite position computations using the multilateration program are compared to results of other position determination programs used at Goddard. All programs give nearly the same results which indicates that because of its simplicity and computational speed the trilateration technique is useful in obtaining spacecraft positions for near synchronous satellites.

Watson, J. S.↗

Solar array flight experiment/dynamic augmentation experiment

This report presents the objectives, design, testing, and data analyses of the Solar Array Flight Experiment/Dynamic Augmentation Experiment (SAFE/DAE) that was tested aboard Shuttle in September 1984. The SAFE was a lightweight, flat-fold array that employed a thin polyimide film (Kapton) as a substrate for the solar cells. Extension/retraction, dynamics, electrical and thermal tests, were performed. Of particular interest is the dynamic behavior of such a large lightweight structure in space. Three techniques for measuring and analyzing this behavior were employed. The methodology for performing these tests, gathering data, and data analyses are presented. The report shows that the SAFE solar array technology is ready for application and that new methods are available to assess the dynamics of large structures in space.

Young, Leighton E.↗

Evaluation of Methods for Multidisciplinary Design Optimization (MDO)

The NASA Langley Multidisciplinary Design Optimization (MDO) method evaluation study seeks to arrive at a set of guidelines for using promising MDO methods by accumulating and analyzing computational data for such methods. The data are collected by conducting a series of reproducible experiments. This report documents all computational experiments conducted in Phase I of the study. This report is a companion to the paper titled Initial Results of an MDO Method Evaluation Study by N. M. Alexandrov and S. Kodiyalam (AIAA-98-4884).

Kodiyalam, Srinivas↗

Solar Irradiance and Thermospheric Airglow Rocket Experiments

This report describes work done in support of the Solar Irradiance and Thermospheric Air-glow Rocket Experiments at the University of Colorado for NASA grant NAG5-5021 under the direction of Dr. Stanley C. Solomon. (The overall rocket program is directed by Dr. Thomas N. Woods, formerly at the National Center for Atmospheric Research, and now also at the University of Colorado, for NASA grant NAG5-5141.) Grant NAG5-5021 provided assistance to the overall program through analysis of airglow and solar data, support of two graduate students, laboratory technical services, and field support. The general goals of the rocket program were to measure the solar extreme ultraviolet spectral irradiance, measure the terrestrial far-ultraviolet airglow, and analyze their relationship at various levels of solar activity, including near solar minimum. These have been met, as shown below. In addition, we have used the attenuation of solar radiation as the rocket descends through the thermosphere to measure density changes. This work demonstrates the maturity of the observational and modeling methods connecting energetic solar photon fluxes and airglow emissions through the processes of photoionization and photoelectron production and loss. Without a simultaneous photoelectron measurement, some aspects of this relationship remain obscure, and there are still questions pertaining to cascade contributions to molecular and atomic airglow emissions. However, by removing the solar irradiance as an "adjustable parameter" in the analysis, significant progress has been made toward understanding the relationship of far-ultraviolet airglow emissions to the solar and atmospheric conditions that control them.

Solomon, Stanley C.↗

Manned Space-Flight Experiments: Gemini V Mission (Interim Report)

This compilation of papers constitutes an interim report on the results of experiments conducted during the Gemini V manned space flight. The results of experiments conducted on Gemini III and IV manned space flights have been published previously in a similar interim report, "Manned Space Flight Experiments Symposium, Gemini Missions III and IV," which is available upon request from MSC Experiments Program Office, Houston, Texas (Code EX, Attention of R. Kinard). The Gemini V mission provided the greatest opportunity to date for conducting experiments; the increased mission duration of eight days provided this added capability. The total mission experiment complement was seventeen. Five experiments were designed to obtain basic scientific knowledge, five were medical, and seven were technological and engineering in nature. Six of the experiments had flown previously on Gemini IV, and eleven were new. The results of the experiments, including real-time modification to preflight plans made necessary by abnormal spacecraft system operation, are presented.

Source record↗

ATS-6 engineering performance report. Volume 5: Propagation experiments

Propagation experiments at 1550 MHz to 1650 MHz are reviewed, including the Integrated L-Band Experiments system and results, and the Mobile L-Band Terminals for Satellite Communication system. Experiments at 4 GHz to 6 GHz are reported, including the Radio Frequency Interferometer Measurements system and results, and Earth station antenna evaluations. Experiments above 10 GHz are discussed, including Comsat and ATS-6 millimeter wave propagation/experiments, and communication ATS-6 version at 20 and 30 GHz.

Wales, R. O.↗

DE 1 VLF observations during Activny wave injection experiments

We report on coordinated high-altitude satellite observations in support of one of the first space-based very low frequency (VLF) wave injection experiments, namely the USSR Aktivny mission. The Aktivny satellite (A) was designed to carry a VLF transmitter (nominal frequency approximately 10 kHz, transmitter power approximately 10 kW) coupled to a 20-m-diameter loop antenna in a nearly polar orbit (83 deg inclination, apogee approximately 2500 km, perigee approximately 500 km). We focus our attention on conjunction experiments between the Aktivny and DE 1 satellites. Because of problems in the deployment of the loop antenna, the radiated power capability of the antenna was significantly reduced. Although this substantially reduced the expectation of receiving detectable signal levels on the satellite, the DE 1/Aktivny conjunction experiments were nevertheless carried out as a means of possibly placing an upper limit on the radiated power. During the period November 1989 through April 1990, a total of 10 DE 1/Aktivny wave injection sessions were conducted. During each session the Aktivny transmitter operated at 10.537 kHz with 1 s On - 1 s Off format, for a period of 6 min centered around the conjunction time. During three conjunction periods (December 12, 26, and 27, 1989) both DE 1 and Aktivny were in the southern hemisphere, and DE 1 was at relatively low altitudes (ranging from 6211 to 14,810 km), thus providing the best conjunction possibilities according to the ray tracing criteria developed above. On most days, Omega transmitter signals as well as commonly occuring natural wave phenomena such as whistlers (0(+)) and hiss were clearly seen well above the background level, but there was no evidence of the Aktivny 1 s On/ 1 s Off pattern. Though no Aktivny signals were detected by the LWR on the DE 1 satellite, the experimental constraints allow us to place an upper limit on the total power radiated by the Aktivny transmitter in the whistler-mode. Using experimental parameters, and the minimum detectable signal level of 0.05 muV/m for LWR, we find the upper limit on the total power radiated by the Aktivny satellite in the whistler-mode to be approximately 10 mW. Several recommendations for future space-based wave injection experiments are presented.

Sonwalkar, V. S.↗

Design and development of experimental facilities for short duration, low-gravity combustion and fire experiments

This report contains the results of three projects conducted by undergraduate students from Worcester Polytechnical Institute at the NASA's Lewis Research Center under a NASA Award NCC3-312. The students involved in these projects spent part of the summer of 1993 at the Lewis Research Center (LeRC). The Principal Investigator at Worcester Polytechnic Institute was Professor Vahid Motevalli. Professor Motevalli served as the principal project advisor for two of the three projects which were in Mechanical Engineering. The third project was advised by Professor Duckworth of Electrical and Computer Engineering, while Professor Motevalli acted as the co-advisor. These projects provided an excellent opportunity for the students to participate in the cutting edge research and engineering design, interact with NASA engineers and gain valuable exposure to a real working environment. This report has been divided to three sections, representing the outcome of each of the separate projects. The three reports which have been written by the students under the supervision of their advisors have been compiled into a combined report by Dr. Motevalli. Each project report is presented here as a section which is essentially self-contained. Each section contains chapters introducing the problem, solution approach, description of the experiments, results and analysis, conclusions and appendixes as appropriate.

Source record↗

Science Data Report for the Optical Properties Monitor (OPM) Experiment

This science data report describes the Optical Properties Monitor (OPM) experiment and the data gathered during its 9-mo exposure on the Mir space station. Three independent optical instruments made up OPM: an integrating sphere spectral reflectometer, vacuum ultraviolet spectrometer, and a total integrated scatter instrument. Selected materials were exposed to the low-Earth orbit, and their performance monitored in situ by the OPM instruments. Coinvestigators from four NASA Centers, five International Space Station contractors, one university, two Department of Defense organizations, and the Russian space company, Energia, contributed samples to this experiment. These materials included a number of thermal control coatings, optical materials, polymeric films, nanocomposites, and other state-of-the-art materials. Degradation of some materials, including aluminum conversion coatings and Beta cloth, was greater than expected. The OPM experiment was launched aboard the Space Shuttle on mission STS-81 in January 1997 and transferred to the Mir space station. An extravehicular activity (EVA) was performed in April 1997 to attach the OPM experiment to the outside of the Mir/Shuttle Docking Module for space environment exposure. OPM was retrieved during an EVA in January 1998 and was returned to Earth on board the Space Shuttle on mission STS-89.

Wilkes, D. R.↗

Processing Materials in Space

Suggested program of material processing experiments in space described in 81 page report. For each experiment, report discusses influence of such gravitational effects as convection, buoyancy, sedimentation, and hydrostatic pressure. Report contains estimates of power and mission duration required for each experiment. Lists necessary equipment and appropriate spacecraft.

Zoller, L. K.↗

UV photon counting detectors for high-altitude balloon and sounding rocket experiments

We report on development of ultraviolet photon counting detectors based on the 2D-doped and atomic layer deposition (ALD) custom coated electron multiplying CCD (EMCCDs) and their deployment in a high-altitude balloon experiment Faint Intergalactic-medium Redshifted Emission Balloon (FIREBall)-2 that was launched on September 22, 2018. The detector quantum efficiency (QE) was optimized for the narrow stratospheric window of a balloon at 200 - 225 nm.

Jones, Todd J.↗

Communications technology satellite - United States experiments and disaster communications applications

The experimental Communications Technology Satellite (CTS), also called Hermes, uses a high-power transmitter and 12- and 14-GHz frequencies for wideband (two- and one-way television) and narrowband (voice, data) communications. In the joint program, both Canada and the United States have conducted a variety of communications experiments. This report concentrates on U.S. CTS experiments and miniexperiments that use ground antennas from 0.6 to 5 meters in diameter. The U.S. CTS experiments program is synopsized in this report. The use of CTS for simulated and actual disasters is summarized.

Donoughe, P. L.↗

Flight Experiment Demonstration System (FEDS) analysis report

The purpose of the Flight Experiment Demonstration System (FEDS) was to show, in a simulated spacecraft environment, the feasibility of using a microprocessor to automate the onboard orbit determination functions. The software and hardware configuration used to support FEDS during the demonstration and the results of the demonstration are discussed.

Shank, D. E.↗

Experiments On Rotating, Charged Liquid Drops

Report describes experiments in which electrically charged drops of liquid levitated electrostatically and rotated and vibrated acoustically. Discusses possibility of measuring charges of drops of low-viscosity liquids by drop-oscillation method, and measurement of surface tensions of highly viscous liquids by drop-rotation method. Results have implications for containerless processing and modeling of atomic nuclei.

Rhim, Won-Kyu↗