Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

A Decade of NASA Strategic Astrophysics Technology Investments: Technology Maturation, Infusion, and Other Benefits

NASA’s Astrophysics Division (APD) funds development of cutting-edge technology to enable its missions to achieve ambitious and groundbreaking science goals. These technology development efforts are managed by the Physics of the Cosmos (PCOS), Cosmic Origins (COR), and Exoplanet Exploration (ExE) Programs. The NASA Strategic Astrophysics Technology (SAT) Program was established in 2009 as a new technology maturation program to fill the gap in the Technology Readiness Level (TRL) range from 3 to 6. Since program inception, 100 SAT grants have been openly competed and awarded, along with dozens of direct-funded projects, leading to a host of technologies advancing their TRLs and/or being infused into space and suborbital missions and ground-based projects. We present the portfolio distribution in terms of specific technology areas addressed, including optics, detectors, coatings, coronagraphs, starshades, lasers, electronics, cooling systems, and micro-thruster subsystems. We show an analysis of the rate of TRL advances, infusion success stories, and other benefits such as training the future astrophysics workforce, including students and postdoctoral fellows hired by projects. Finally, we present APD’s current strategic technology maturation priorities for investment, enabling a range of future strategic astrophysics missions

NASA, astrophysics, technology development, optics↗
NASA NTRS2024

Mark I Silicon Carbide Integrated Circuit Test Oven Assembly and Programming Guide

This report provides a parts list, with assembly and programming instructions for building firstgeneration (Mark I) compact test ovens; this oven design is customized for prolonged functional electrical testing of prototype silicon carbide (SiC) devices at temperatures up to 500 °C (932 °F). The general approach of using multiple compact ovens to perform long-term, high-temperature electronics testing efficiently is described in a conference paper (Izadnegahdar, Alain, et al.: Alternative Setup for LongDuration Low-Duty-Cycle 600 °C Ambient Testing of SiC Integrated Circuits. International Microelectronics Assembly and Packaging Society (iMAPS) HiTECH 2021 Technology Crossover Extravaganza, 2021), available at https://ntrs.nasa.gov/citations/20210011676. The new Mark I oven design described here offers several significant improvements over the compact oven described in that paper. For example, it is constructed from commercial off-the-shelf (COTS) components and requires minimal assembly. Much of the work involves drilling holes in the two aluminum project boxes, which contain the control electronics and the oven itself. The cost of components is less than $200 (USD) per oven, which makes constructing multiple ovens affordable. In addition, the two-box design separates the high-temperature heater from the electronics, which keeps the electronics cool, prolonging the lifetime of these components.

high temperature↗
NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop® (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

Heat transfer↗
NASA NTRSDate not supplied

Coupling a Computational Fluid Dynamics (CFD) Model to a Spacecraft Thermal System Model for the DraMS Instrument Thermal Analysis

The Dragonfly Mass Spectrometer (DraMS) is an instrument on the Dragonfly mission, which will spend 7 years in deep space cruise before landing and operating on the surface of Titan. Vacuum thermal analyses are required for deep space cruise, and convection analyses are required for the Titan surface operations. Model exchanges across multiple thermal teams are needed for all phases of the mission. For DraMS, Thermal Desktop (TD) has been the main thermal analytical tool of choice due to its capability in modeling complex thermal systems with relatively low computational power and for its availability across thermal teams. However, TD does not have computational fluid dynamics (CFD) capability and struggles to accurately capture complex convective behavior. DraMS has fans operating in tandem and gas flow behaviors are not easily predicted due to its complex flow paths. CFD software, such as Fluent, can model and predict such complex flow behaviors, but CFD models are computationally expensive, and its workflow processes are not tailored towards simulating large and complex systems. Therefore, a coupled modeling approach was chosen for DraMS: A TD model was used for simulating all the conductive, radiative, and source terms, while a Fluent CFD model was added on, as needed, to the TD model to provide the convective boundary conditions using the System Coupling software. The coupling software allows the TD and Fluent models to communicate data and arrive at a co-solved and co-converged solution. Furthermore, Thermal Iso-value Exchange (TIE) method was developed to facilitate and improve the TD-Fluent data exchange process. This paper will discuss the analytical studies that were done to verify the accuracy and usability of the coupled approach and the challenges associated, which lead to the development of the TIE approach. DraMS thermal design and co-solved analysis results will also be discussed.

heat transfer↗
DOE OSTI2016

A SIMPLE METHOD FOR MEASURING THE ELECTRON-BEAM MAGNETIZATION

There are a number of projects that require magnetized beams, such as electron cooling or aiding in “flat” beam transforms. Here we explore a simple technique to characterize the magnetization, observed through the angular momentum of magnetized beams. These beams are produced through photoemission. The generating drive laser first passes through microlens arrays (fly-eye light condensers) to form a transversely modulated pulse incident on the photocathode surface [1]. The resulting charge distribution is then accelerated from the photocathode. We explore the evolution of the pattern via the relative shearing of the beamlets, providing information about the angular momentum. This method is illustrated through numerical simulations and preliminary measurements carried out at the Argonne Wakefield Accelerator (AWA) facility are presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Experimental Demonstration of an Additively Manufactured Vapor Chamber Heat Spreader

Vapor chambers and heat pipes are often used as standalone heat spreaders for electronics cooling and in other applications. Metal additive manufacturing (AM) techniques have an intrinsic ability to form the porous structures and internal cavities required to fabricate a vapor chamber or a heat pipe. Additive manufacturing techniques thereby have potential for fabricating vapor chambers with complex geometries and locally tailored wick structures to improve performance as well as to monolithically embed vapor chamber heat spreaders within other components. The focus of the present work is to conduct an experimental assessment of the viability of additively manufactured vapor chambers. A direct metal laser sintering (DMLS) technique was used to fabricate a monolithic stainless steel vapor chamber heat spreader with a 39% porous, 0.5-mm thick wick and a 1.5-mm thick internal vapor core. The functionality of the as-printed vapor chamber was evaluated based on characterization of the heat spreading behavior with and without fluid charge. Charging with water decreased the effective thermal resistance of the device while spreading heat from a central hot spot, confirming functionality of the additively manufactured vapor chamber.

Ozguz, Serdar↗
DOE OSTI2022

Enhanced Pool Boiling of Low-Pressure Refrigerants on Round Tubes- An Experimental Evaluation

Pool boiling heat transfer is one of the most effective heat transfer methos and crucial for several energy conversion processes such as electronic cooling, steam generation, water purification and thermal management. Enhancing boiling heat transfer around the tubes enables higher heat flux, which can improve the efficiency and lead to compact heat exchangers. Delaying the onset of critical heat flux (CHF) allows for higher CHFs and protects equipment during anomalous transient conditions. Growing interest in process intensification and delayed CHF has motivated the current study. An experimental approach has been deployed to investigate a potential technique to enhance the pool boiling performance around small diameter tubes by open cell metal foams. The findings for nucleate pool boiling of Novec HFE 7000 on the externally enhanced and smooth tubes are reported. The enhanced tube comprised of compressed aluminum foam brazed around. All the samples were horizontally oriented, and the experiments were performed under ambient pressure conditions. The heat transfer measurements for the smooth tubes were compared with several existing correlations and established the baseline. The preliminary results showed that the aluminum foam effectively enhanced the heat transfer coefficient and delayed the onset of critical heat flux. In addition, the pool boiling process around the round tube sample was visualized from both side and front views to comprehend the heat transfer mechanisms underlying substantial enhancement observed during experiments.

Yang, Cheng-Min↗
DOE OSTI2023

Commissioning of the Low Energy Electron Gun Test Stand at the University of Chicago

We built a test stand for evaluating the performance of the thermionic electron sources for the electron lens project at the Integrable Optics Test Accelerator (IOTA) in Fermilab. The lens will be used to study nonlinear dynamics and electron cooling of 2.5 MeV protons with strong space charge. The test stand will validate the characteristics of the thermionic sources and the main parameters of the generated beams. In this paper we present the results of the commissioning of the UChicago test stand and validation of the hollow beam source.

43 PARTICLE ACCELERATORS↗
DOE OSTI2017

CFD Simulation of Bubble Growing Under a Downward Facing Surface

The heat removing of downward facing surface is an important issue in many areas, including nuclear safety, solar storage system and electronic cooling devices. Therefore, the characteristic and heat removal capability of downward facing boiling were investigated by many experiments in recent years. Among these studies, the thickness of bubble is considered as an important parameter. The increasing of bubble thickness will increase the thermal resistance of cooling process and reduce the cooling ability. In order to focus on the dynamics of bubble thickness, Das et al. injected air into sodium dodecyl sulphate (SDS) solution through a nozzle under the horizontal downward facing surface. The bubble will be formed by the air injection and kept under the horizontal plate. The diameter of nozzle, horizontal plate and SDS solution tank are 2 mm, 20 mm and 30 mm, respectively. The growing processing and the stable thickness of the bubble were recorded in the experiment. Basing on the conditions of Das's experiment, the appropriate computational fluid dynamics (CFD) simulation was conducted. The growing process and the stable thickness of bubble under difference contact angle are predicted by CFD in this study.

42 ENGINEERING↗
DOE OSTI2024

Collisionless cooling of perpendicular electron temperature in the thermal quench of a magnetized plasma

Thermal quench of a nearly collisionless plasma against an isolated cooling boundary or region is an undesirable off-normal event in magnetic fusion experiments, but an ubiquitous process of cosmological importance in astrophysical plasmas. Parallel transport theory of ambipolar-constrained tail electron loss is known to predict rapid cooling of the parallel electron temperature $T_{e\Vert}$ although $T_{e\Vert}$ is difficult to diagnose in actual experiments. Instead direct experimental measurements can readily track the perpendicular electron temperature $T_{e\bot}$ via electron cyclotron emission. The physics underlying the observed fast drop in $T_{e\bot}$ requires a resolution. Here two collisionless mechanisms, dilutional cooling by infalling cold electrons and wave-particle interaction by two families of whistler instabilities, are shown to enable fast $T_{e\bot}$ cooling that closely tracks the mostly collisionless crash of $T_{e\Vert}$. These findings motivate both experimental validation and reexamination of a broad class of plasma cooling problems in laboratory, space, and astrophysical settings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Redistribution of cooling rates for electron bunch with nonuniform density

In this paper we derive explicit formulas for the friction force and the cooling rates in non-magnetized electron coolers in the presence of redistribution of cooling decrements. In the derived formulas we take into account that the density of the electron bunch can be non-uniform.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Proposed Longitudinal Profile Diagnostics for Optical Stochastic Cooling of Stored Electrons in the IOTA Ring

One of the predicted signatures of successful optical stochastic cooling (OSC) in the Fermilab Integrable Optics Test Accelerator (IOTA) ring is reduction of the bunch length. The IOTA OSC experiment is designed for a low nominal beam current (~0.1 microAmps of 100-MeV electrons) to reduce intrabeam scattering (IBS), and during cooling, OSC is expected to reduce the bunch length from ~200 ps to ~130 ps*. These equilibrium bunch lengths can be measured using a streak camera and the optical synchrotron radiation (OSR) generated in a ring dipole by the circulating beam. A similar measurement was previously performed at the Advanced Photon Source with a Hamamatsu C5680 synchroscan streak camera operating at 117.3 MHz**. In this case, synchronous summing of OSR resulted in a bunch length measurement of 276 ± 30 ps using only 57 electrons circulating at 425 MeV. At IOTA, an existing streak camera has been modified to operate at the 11th harmonic of the ring’s revolution frequency of 7.50 MHz and has been installed on an OSR port in support of the OSC experiments. The integrated system will have sufficient sensitivity and resolution for measuring the evolution and equilibrium values of the bunch length during OSC experiments.

Lumpkin, Alex H.↗
DOE OSTI2023

Perspective of a Dual Energy Electron Storage Ring Cooler for a Hadron Beam Cooling

A dual energy electron storage ring cooler was proposed and explored to maintain a good hadron beam quality against intra-beam scattering and all heating sources in a collider. The unique configuration of this concept is that electron beam in the low energy section extracts heat away from the hadron beam through Coulomb interaction while electron beam in the high energy section releases heat through its intrinsic synchrotron radiation damping. The early design employs a magnetized electron beam for achieving a high cooling efficiency. Recently, a non-magnetized cooling electron beam was explored in this dual energy cooler. It could meet the same cooling requirements while lowering the risks. This paper presents study results on design and optimization of a dual energy storage ring cooler and describes the trade-offs between using magnetized and non-magnetized cooling for this approach.

Lin, Fanglei↗
NASA NTRS1998

Frequency-Domain Analysis of Diffusion-Cooled Hot-Electron Bolometer Mixers

A new theoretical model is introduced to describe heterodyne mixer conversion efficiency and noise (from thermal fluctuation effects) in diffusion-cooled superconducting hot-electron bolometers. The model takes into account the non-uniform internal electron temperature distribution generated by Wiedemann-Franz heat conduction, and accepts for input an arbitrary (analytical or experimental) superconducting resistance-versus- temperature curve. A non-linear large-signal solution is solved iteratively to calculate the temperature distribution, and a linear frequency-domain small-signal formulation is used to calculate conversion efficiency and noise. In the small-signal solution the device is discretized into segments, and matrix algebra is used to relate the heating modulation in the segments to temperature and resistance modulations. Matrix expressions are derived that allow single-sideband mixer conversion efficiency and coupled noise power to be directly calculated. The model accounts for self-heating and electrothermal feedback from the surrounding bias circuit.

Skalare, A.↗
DOE OSTI2015

A robust platform cooled by superconducting electronic refrigerators

A biased tunnel junction between a superconductor and a normal metal can cool the latter electrode. Based on a recently developed cooler with high power and superior performance, we have integrated it with a dielectric silicon nitride membrane, and cooled phonons from 305 mK down to 200 mK. Without perforation and covered under a thin alumina layer, the membrane is rigorously transformed into a cooling platform that is robust and versatile for multiple practical purposes. We discussed our results and possibilities to further improve the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Simulations and Experimental Plans for a High-Repetition-Rate Field-Enhanced Conduction-Cooled Superconducting RF Electron Source

We present a novel RF design for a field enhanced electron source driven by field emission cathodes. The proposed electron source relies on the enhanced high electric field gradients at the cathode to simultaneously extract and accelerate electrons. The system will be tested in a conduction-cooled superconducting radio-frequency cavity recently demonstrated at Fermilab. In this paper, we present electromagnetic and thermal simulations of the setup that support the feasibility of the design.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Simulations for Field-Enhanced Conduction-Cooled Superconducting RF Electron Source

We present a novel RF design for a field enhanced electron source driven by field emission cathodes. The proposed electron source relies on the enhanced high electric field gradients at the cathode to simultaneously extract and accelerate electrons. The system will be tested in a conduction-cooled superconducting radiofrequency cavity recently demonstrated at Fermilab. In this work, we present electromagnetic and thermal simulations of the setup that support the feasibility of the design.

43 PARTICLE ACCELERATORS↗