SEARCH · Engineering Papers

Results for “device engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1961

Hovering and Transition Flight Tests of a 1/5-Scale Model of a Jet-Powered Vertical-Attitude VTOL Research Airplane

An experimental investigation has been made to determine the dynamic stability and control characteristics of a 1/5-scale flying model of a jet-powered vertical-attitude VTOL research airplane in hovering and transition flight. The model was powered with either a hydrogen peroxide rocket motor or a compressed-air jet exhausting through an ejector tube to simulate the turbojet engine of the airplane. The gyroscopic effects of the engine were simulated by a flywheel driven by compressed-air jets. In hovering flight the model was controlled by jet-reaction controls which consisted of a swiveling nozzle on the main jet and a movable nozzle on each wing tip; and in forward flight the model was controlled by elevons and a rudder. If the gyroscopic effects of the jet engine were not represented, the model could be flown satisfactorily in hovering flight without any automatic stabilization devices. When the gyroscopic effects of the jet engine were represented, however, the model could not be controlled without the aid of artificial stabilizing devices because of the gyroscopic coupling of the yawing and pitching motions. The use of pitch and yaw dampers made these motions completely stable and the model could then be controlled very easily. In the transition flight tests, which were performed only with the automatic pitch and yaw dampers operating, it was found that the transition was very easy to perform either with or without the engine gyroscopic effects simulated, although the model had a tendency to fly in a rolled and sideslipped attitude at angles of attack between approximately 25 deg and 45 deg because of static directional instability in this range.

Smith, Charles C., Jr.↗

DOE OSTI2020

Influence of Hydrogen and Oxygen on the Structure and Properties of Sputtered Magnesium Zirconium Oxynitride Thin Films

Nitride materials with mixed ionic and covalent bonding character and resulting good charge transport properties are attractive for optoelectronic devices. Recently, Mg-based ternary nitride materials were found to have large dielectric constants and high absorption coefficients with bandgaps appropriate for photovoltaic applications. However, their degenerate carrier concentrations still hinder their possible applications in solar cells and related optoelectronic devices. Therefore, further understanding and engineering of the parameters controlling the material properties of these ternary nitrides is highly desirable. In this paper we report that the structural, optical and electrical properties of magnesium zirconium oxynitride (MZNO) thin films synthesized by combinatorial sputtering with a wide range of cation compositions can be affected by incorporation of oxygen and hydrogen. Excess oxygen improved the crystallinity of MZNO thin films whereas hydrogen attracted oxygen and formed Mg-rich oxide layers at the grain boundaries which in turn reduced the conductivity. On the other hand, optical properties are more sensitive to the composition – both cation and anion ratios – rather than the presence of hydrogen. Compared to cation-stoichiometric MZNO (10 19 –10 20 cm -3 ), substantial reduction of carrier concentration down to ~10 14 cm -3 was achieved under Mg-rich conditions by supplying hydrogen during growth. Photoluminescence measurements showed that the films prepared with hydrogen were optoelectronically active. Overall, this study demonstrates that the material properties of MZN thin films can be significantly influenced by incorporation of oxygen and hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1977

Oscillator devices using thick-film technology

The Electrical Engineering Department of North Carolina Agricultural and Technical State University has developed a microelectronics laboratory as a result of research involving microelectronics and metallic-oxide studies over the past five years. Work on characterization and applications of metallic-oxide devices is currently being conducted. This paper reports on the fabrication of eight oscillator devices on a 1-in. square alumina substrate using metallic-oxide materials developed as a result of the research program. Significant technological capabilities of the laboratory relative to the microelectronics industry in the area of microelectronic-component evaluation are also discussed.

Williams, L., Jr.↗

DOE OSTI2024

Development and Optimization of a Multi-Functional SCR-DPF Aftertreatment System for Heavy-Duty NOX and Soot Emission Reduction

The objective of this project is to develop a strategy for the integration of catalytic NOX emission control and particulate matter emission control into a single device for the successful application to heavy-duty on-road diesel engine exhaust aftertreatment. The critical attributes of such a device, for successful application to PACCAR fleet, are as follows: 1. Must have sufficient filtration efficiency and successfully demonstrate soot management strategies (i.e., oxidation) to be economically attractive and regulatory compliant for particulate matter abatement. 2. In particular, the integrated device must retain sufficiently high soot oxidation capacity with NO2 (i.e., passive soot oxidation) across an applicable engine test cycle to be economically attractive. 3. Must exhibit sufficient catalytic NOX reduction activity in an economically-attractive fashion that is regulatory compliant.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Emitter Reconstruction for Cleaved CdSexTe1-x Devices with Cu vs. As Doping

CdTe absorbers have had historically low carrier densities of ~10^14 cm-3 due to the self-compensating nature of copper dopants. Recent advances in group-V (e.g., arsenic) doping have increased this to 10^16-10^17 cm-3, but modeling suggests that the front interface and emitter properties become limiting in this case. By cleaving arsenic- and copper-doped CdTe device stacks at the emitter/absorber interface, we gain the ability to reconstruct emitters with known properties, which will not change during subsequent device processing, and directly test the modeling. By doing so, we find a much larger performance drop in arsenic devices; this is attributed to insufficient electron density in the emitter and increased sensitivity to interface changes due to collapsed depletion width. This work can help guide emitter engineering for highly-doped CdTe devices in both the as-grown-superstrate- and cleaved-substrate configurations.

As-doped↗

NASA NTRSDate not supplied

A Simple Model for Rotating Detonation Rocket Engine Sizing and Performance Estimates

A Rotating Detonation Rocket Engine (RDRE) model is described which characterizes the device as an essentially infinite number of circumferentially arranged, sequentially firing pulse detonation engine (PDE) tubes. The PDE tubes are in turn treated as lumped-parameter chambers, each of which executes a dynamic (i.e. time dependent) Atkinson cycle with an allowance for a finite Mach number during the refill portion of the cycle. The formulation results in several free parameters which are used to essentially tune the model such that it closely matches higher fidelity computational fluid dynamic RDRE simulations in terms of performance, flow rates, etc. The simplicity of the model allows for straightforward combination with component models (e.g. turbopumps, cooling jackets, etc.) as well as implementation within larger vehicle simulations. Such capability allows for realistic mission analyses and benefits studies which will help to determine the best application for the RDRE concept.

detonation↗

NASA NTRSDate not supplied

A Simple Model for Rotating Detonation Rocket Engine Sizing and Performance Estimates

detonation↗

DOE OSTI2020

Low Current and Analog Memristor with Ru as Mobile Species

The switching parameters and device performance of memristors are predominately determined by their mobile species and matrix materials. Devices with oxygen or oxygen vacancies as the mobile species usually exhibit a great retention but also need a relatively high switching current (e.g., >30 mu A), while devices with Ag or Cu as cation mobile species do not require a high switching current but usually show a poor retention. Here, Ru is studied as a new type of mobile species for memristors to achieve low switching current, fast speed, good reliability, scalability, and analog switching property simultaneously. An electrochemical metallization-like memristor with a stack of Pt/Ta2O5/Ru is developed. Migration of Ru ions is revealed by energy-dispersive X-ray spectroscopy mapping and in situ transmission electron microscopy within a sub-10 nm active device area before and after switching. The results open up a new avenue to engineer memristors for desired properties.

analog switching↗

DOE OSTI2020

Supported and coordinated single metal site electrocatalysts

The ever-increasing global environmental and energy crisis issues necessitates technological innovation, especially in the development of renewable energy-related devices, such as electrochemical energy conversion and storage technologies, including fuel cells, water electrolyzers, and CO 2 electrolyzers. Reliable and sustainable energy conversion devices are highly dependent on engineering of electrocatalysts. Furthermore, state-of-the-art electrocatalysts for these electrochemical conversion systems are usually platinum group metal (PGM)-based nanoparticles with high cost, which has sparked intensive research on atomically dispersed single metal site electrocatalysts for decreasing metal loadings and boosting catalytic efficiencies by taking advantage of their inherent electronic effects, quantum size effects, and metal-support interactions. In this review, we first introduced the intrinsic active site identification and stabilization, followed by addressing the mutual metal-support interactions, and most important, their correlations with catalytic properties. Next, the advances in synthetic strategies and characterization techniques for single metal site electrocatalysts are highlighted. Additionally, recent advances in single metal site electrocatalysts designs for applications in electrochemical conversion reactions are also presented. Finally, remaining challenges and a forward-looking perspective on this field of research are provided.

25 ENERGY STORAGE↗

DOE OSTI2026

Dynamic Nanoscale Spatial Heterogeneity in a Perovskite-to-Brownmillerite Topotactic Phase Transformation

Phase transitions are omnipresent in modern condensed matter physics and its applications. In solids, first-order phase transformations typically occur by nucleation and growth under nonequilibrium conditions. Under constant external conditions, e.g., constant annealing temperature and pressure, the nucleation and growth dynamics are often thought of as spatially and temporally independent. Here, in situ Bragg X-ray photon correlation spectroscopy (XPCS) reveals nanoscale spatial and dynamical heterogeneity in the perovskite-to-brownmillerite topotactic phase transformation in La 0.7 Sr 0.3 CoO 3 thin films annealed under constant reducing conditions over a time span of multiple hours. Specifically, a time scale associated with domain growth remains stable, with a corresponding domain wall speed of v d = 6 ± 0.5 × 10 –4 nm/s (2 ± 0.2 nm/h), while a slower time scale, associated with temperature-driven depinning of domains, leads to accelerating dynamics with time scales following an aging power law with exponent −2.2 ± 0.5. This experiment demonstrates that Bragg XPCS is a powerful tool to study nanoscale dynamics in structural phase transformations, with the ability to extract quantitative average values related to nanodomain motion in situ. Furthermore, the results are relevant for phase engineering of phase-change devices, as they show that nanoscale dynamics, linked to domain and domain-wall motion, can continuously evolve and speed up with time, even hours after the initiation of the phase transformation, with potential repercussions on electrical performance.

X-ray photon correlation spectroscopy↗

DOE OSTI2026

Deterministic Fabrication of Large-Area, High-Crystallinity Oxide Moiré Superlattices

Oxide twistronics extends moiré engineering beyond van der Waals materials, offering a promising platform for accessing emergent interfacial phenomena arising from the strong coupling of lattice, charge, and orbital degrees of freedom in complex oxides. However, deterministic fabrication of high-crystallinity oxide moiré superlattices over large lateral dimensions remains challenging due to the three-dimensional bonding network of oxides. Here, we demonstrate a scalable, generalized fabrication strategy that enables the formation of high-crystallinity oxide moiré superlattices with clean, chemically bonded interfaces and precisely controlled twist angles down to nominal values of 0.1°, achieving subdegree twist-angle accuracy across large contiguous lateral dimensions approaching the millimeter scale. Using NaNbO3 as a model system, we show that the resulting interlayer coupling drives pronounced structural reconstruction that modifies both the phase structure and ferroelectric domain configuration. Synchrotron-based X-ray 3D reciprocal space mapping reveals the emergence of a single-phase state in twisted bilayers, in contrast to the mixed-phase structure observed in single-layer membranes prior to twist assembly. The structural signatures are further consistent with gradual lattice rotation distributed along the thickness direction that may accommodate interfacial shear strain, distinct from reconstruction observed in van der Waals moiré systems which primarily occurs through in-plane stacking rearrangement. This collective lattice response is correlated with twist-dependent nanoscale electromechanical modulations observed by piezoresponse force microscopy. These results establish a scalable materials platform for oxide twistronics and support the implementation of twist-engineered functionalities in practical, macroscale device architectures.

Ghanbari, Reza [North Carolina State University (N↗

DOE OSTI2022

A charge transfer framework that describes supramolecular interactions governing structure and properties of 2D perovskites

The elucidation of structure-to-function relationships for two-dimensional (2D) hybrid perovskites remains a primary challenge for engineering efficient perovskite-based devices. By combining insights from theory and experiment, we describe the introduction of bifunctional ligands that are capable of making strong hydrogen bonds within the organic bilayer. We find that stronger intermolecular interactions draw charge away from the perovskite layers, and we have formulated a simple and intuitive computational descriptor, the charge separation descriptor (CSD), that accurately describes the relationship between the Pb-I-Pb angle, band gap, and in-plane charge transport with the strength of these interactions. A higher CSD value correlates to less distortion of the Pb-I-Pb angle, a reduced band gap, and higher in-plane mobility of the perovskite. These improved material properties result in improved device characteristics of the resulting solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

A hybrid topological quantum state in an elemental solid

Topology and interactions are foundational concepts in the modern understanding of quantum matter. Their nexus yields three important research directions: (1) the competition between distinct interactions, as in several intertwined phases, (2) the interplay between interactions and topology that drives the phenomena in twisted layered materials and topological magnets, and (3) the coalescence of several topological orders to generate distinct novel phases. The first two examples have grown into major areas of research, although the last example remains mostly unexplored, mainly because of the lack of a material platform for experimental studies. Here, using tunnelling microscopy, photoemission spectroscopy and a theoretical analysis, we unveil a ‘hybrid’ topological phase of matter in the simple elemental-solid arsenic. Through a unique bulk-surface-edge correspondence, we uncover that arsenic features a conjoined strong and higher-order topology that stabilizes a hybrid topological phase. Although momentum-space spectroscopy measurements show signs of topological surface states, real-space microscopy measurements unravel a unique geometry of topologically induced step-edge conduction channels revealed on various natural nanostructures on the surface. Using theoretical models, we show that the existence of gapless step-edge states in arsenic relies on the simultaneous presence of both a non-trivial strong Z 2 invariant and a non-trivial higher-order topological invariant, which provide experimental evidence for hybrid topology. Finally, our study highlights pathways for exploring the interplay of different band topologies and harnessing the associated topological conduction channels in engineered quantum or nano-devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Self-consistent investigation of density fueling needs on ITER and CFETR utilizing the new Pellet Ablation Module

Abstract Self-consistent modeling using the stability, transport, equilibrium, and pedestal (STEP) workflow in the OMFIT integrated modeling framework (predicting pedestal with EPED, core profiles with TGYRO, current profile with ONETWO, and EFIT for equilibrium) suggests ITER and future devices such as China Fusion Engineering Test Reactor (CFETR) Zhuang et al (2019 Nucl. Fusion 59 112010) will benefit from high-density operation (Greenwald limit fraction f g w ≈ 0.7−1.3). Regimes with an operational density near the Greenwald limit will likely need peaked density profiles so that the pedestal density remains below the Greenwald limit. Peaked density profiles can be achieved with the help of pellet injection. A flexible Pellet Ablation Module (PAM), which predicts the density source based on a comprehensive analytical pellet ablation model, has been developed for predicting pellet fueling for transport studies, and has been incorporated into the STEP workflow for predictive modeling. This workflow is applied to DIII-D and finds good agreement with experiments. On ITER the effect of pellet fueling is examined in an advanced inductive scenario, where a fusion gain of up to Q = 9 is predicted with strong central pellet fueling. On CFETR, with a mid-radius density source, an average of 1.5 × 10 22 electrons s −1 are required to achieve the density and temperature profiles necessary for the 1000 MW advanced scenario with a tritium burn-up fraction of ∼ 3 % .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Highly sensitive spin-flop transition in antiferromagnetic van der Waals material M PS 3 ( M = Ni and Mn)

Recent developments in two-dimensional (2D) magnetism have motivated the search for van der Waals (vdW) magnetic materials to explore magnetic phenomena in the 2D limit. Metal thiophosphates, MPX 3 , are a class of magnetic vdW materials with antiferromagnetic ordering persisting down to the atomically thin limit. The magnetism in this material family has been found to be highly dependent on the choice of transition metal M. In this paper, we have synthesized the intermediate compounds Ni 1–x Mn x PS 3 (0 ≤ x ≤ 1) and investigated their magnetic properties. Our study reveals that the variation of Ni and Mn content in Ni 1–x Mn x PS 3 can efficiently tune the spin-flop transition, likely due to the modulation of the magnetic anisotropy. Such effective tuning offers a promising candidate to engineer 2D magnetism for future device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Developments and Challenges in the Design of the ITER DRGA

We report the ITER Diagnostic Residual Gas Analyzer (DRGA) will measure the distribution of gas species, i.e., deuterium (D), tritium (T), and impurities, in the divertor exhaust stream and in the plasma periphery, with time resolution relevant to fusion plasma–wall particle dynamics. The uniqueness of the DRGA, over previous implementations of plasma dynamics residual gas analysis, is an integrated approach, combining mass and low-temperature plasma-activated optical spectroscopy, in a differentially pumped analysis station. A further unique feature of the ITER divertor-specific DRGA is an ~8-m separation of the analysis station from the sampled pumping duct, while still maintaining a ~1-s response time for hydrogen isotopic concentrations. ITER DRGA final design activities are strongly benefiting from testing of prototypical DRGA components and methods on present fusion devices, most currently on JET and W7-X. DRGA systems are implemented on both these devices and include sensors (and pumping methods) that are directly relevant to the ITER DRGA design. The recent JET-DTE2 campaign has provided the first experience on operating the combined ITER DRGA sensors with D-T plasmas. While enhancing system design for ITER, this experience on operating devices has also revealed additional engineering challenges, which further guide the continuing final design project. Meanwhile, the recent determination that the ITER DRGA, with slight optimization, will resolve the helium isotopes well enough to support an ITER pre-DT, He-3-based heating scheme, has greatly increased ITER Research Program interest in the DRGA and its implementation well ahead of the DT phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

A high-resolution molecular spin-photon interface at telecommunication wavelengths

Optically addressable electronic spins in polyatomic molecules are a promising platform for quantum information science, with the potential to enable scalable qubit design and integration through atomistic tunability and nanoscale localization. However, optical state- and site-selection are an open challenge. Here, in this work, we introduce an organo-erbium spin qubit in which narrow (megahertz-scale) optical and spin transitions couple to provide high-resolution access to spin degrees of freedom with telecommunication-frequency light. This spin-photon interface enables demonstration of optical spin polarization and readout that distinguishes between spin states and magnetically inequivalent sites in a molecular crystal. Operation at frequencies compatible with mature photonic and microwave devices provides an opportunity for engineering scalable, integrated molecular spin-optical quantum technologies.

Weiss, Leah R. [University of Chicago, IL (United ↗

DOE OSTI2022

The SODA Approach: Leveraging High-Level Synthesis for Hardware/Software Co-design and Hardware Specialization: Invited

Novel "converged" applications combine phases of scientific simulation with data analysis and machine learning. Each computational phase can benefit from specialized accelerators. However, algorithms evolve so quickly that mapping them on existing accelerators is suboptimal or even impossible. This paper presents the SODA (Software Defined Accelerators) framework, a modular, multi-level, open-source, no-human-in-the-loop, hardware synthesizer that enables end-to-end generation of specialized accelerators. SODA is composed of SODA-Opt, a high-level frontend developed in MLIR that interfaces with domain-specific programming frameworks and allows performing system level design, and Bambu, a state-of-the-art high-level synthesis engine that can target different device technologies. The framework implements design space exploration as compiler optimization passes. We show how the modular, yet tight, integration of the high-level optimizer and lower-level HLS tools enables the generation of accelerators optimized for the computational patterns of converged applications. We then discuss some of the research opportunities that such a framework allows, including system-level design, profile driven optimization, and supporting new optimization metrics.

Bohm Agostini, Nicolas↗