SEARCH · Engineering Papers

Results for “determinant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Viking satellite orbit determination

During the summer of 1976, the two Viking spacecraft, each consisting of an orbiter-lander combination, were inserted into orbit about Mars. The paper describes the experiences of the Viking Satellite Orbit Determination Team in determining Mars centered ephemerides of the orbiters and positions of the landers from the two-way Doppler and range data, and synthesizes the different phases of the navigation plan which involves pre-flight modeling and error analysis for all Viking navigation functions from launch through landing. The problem of initial orbit convergence is solved by using DPODP's (Double Precision Orbit Determination Program) square-root batch data filter, and gravity models for both Viking I and Viking II were produced from the combination of short arc estimates. The importance of synchronous Viking orbits (with the rotational period of Mars) is stressed and future extended missions of the spacecraft are outlined.

Hildebrand, C. E.↗

NASA NTRS1977

A methodology for experimentally based determination of gap shrinkage and effective lifetimes in the emitter and base of p-n junction solar cells and other p-n junction devices

An experimentally based methodology that determines the effective gap shrinkage and lifetime in the emitter of a p-n junction solar cell is described which provides an experimental means for assessing the importance of gap shrinkage relative to that of large recombination rates in the highly doped emitter. The base lifetime is also determined. The methodology pertains to a solar cell after the junction is formed, so that each material parameter determined includes the effects of the processing used in junction fabrication. The methodology consists of strategy and procedures for designing experiments and interpreting data consistently with the physical mechanisms governing device behavior. This careful linking to the device physics uncover the material parameters concealed in the data. To illustrate the procedures, they are applied to an n(+)-p solar cell having substrate resistivity of about 0.1 ohm-cm.

Lindholm, F. A.↗

NASA NTRS1977

Experimental and analytical determination of characteristics affecting light aircraft landing-gear dynamics

An experimental and analytical investigation was conducted to determine which characteristics of a light aircraft landing gear influence gear dynamic behavior significantly. The investigation focused particularly on possible modification for load control. Pseudostatic tests were conducted to determine the gear fore-and-aft spring constant, axial friction as a function of drag load, brake pressure-torque characteristics, and tire force-deflection characteristics. To study dynamic tire response, vertical drops were conducted at impact velocities of 1.2, 1.5, and 1.8 m/s onto a level surface; to determine axial-friction effects, a second series of vertical drops were made at 1.5 m/s onto surfaces inclined 5 deg and 10 deg to the horizontal. An average dynamic axial-friction coefficient of 0.15 was obtained by comparing analytical data with inclined surface drop test data. Dynamic strut bending and associated axial friction were found to be severe for the drop tests on the 10 deg surface.

Fasanella, E. L.↗

NASA NTRS1977

Application of modified Twomey techniques to invert lidar angular scatter and solar extinction data for determining aerosol size distributions

Polarization properties of the angularly scattered laser light from a volume of air are used to determine the size distribution of the aerosol particles within the volume by the use of appropriate inversion techniques. Similar techniques are employed to determine a mean size distribution of the particulates within a vertical column through the atmosphere from determinations of the aerosol optical depth as a function of wavelength. In both of these examples, a modification of an inversion technique originally described by Twomey has been employed. Details of this method are presented as well as results from actual measurements employing bistatic lidar and solar radiometer.

Herman, B. M.↗

NASA NTRS1977

Method of fan sound mode structure determination

A method for the determination of fan sound mode structure in the Inlet of turbofan engines using in-duct acoustic pressure measurements is presented. The method is based on the simultaneous solution of a set of equations whose unknowns are modal amplitude and phase. A computer program for the solution of the equation set was developed. An additional computer program was developed which calculates microphone locations the use of which results in an equation set that does not give rise to numerical instabilities. In addition to the development of a method for determination of coherent modal structure, experimental and analytical approaches are developed for the determination of the amplitude frequency spectrum of randomly generated sound models for use in narrow annulus ducts. Two approaches are defined: one based on the use of cross-spectral techniques and the other based on the use of an array of microphones.

Pickett, G. F.↗

NASA NTRS1977

The determination of aluminum, copper, iron, and lead in glycol formulations by atomic absorption spectroscopy

Initial screening tests and the results obtained in developing procedures to determine Al, Cu, Fe, and Pb in glycol formulations are described. Atomic absorption completion was selected for Cu, Fe and Pb, and after comparison with emission spectroscopy, was selected for Al also. Before completion, carbon, iron, and lead are extracted with diethyl dithio carbamate (DDC) into methyl isobutyl ketone (MIBK). Aluminum was also extracted into MIBK using 8-hydroxyquinoline as a chelating agent. As little as 0.02 mg/l carbon and 0.06 mg/l lead or iron may be determined in glycol formulations. As little as 0.3 mg/l aluminum may be determined.

Source record↗

NASA NTRS1978

Determination of carbon by the oxidation reduction reaction with chromium

Free carbon was determined in silicon and boron carbides in ash, oxides, and other materials by oxidation to carbon dioxide with a mixture of K2Cr2O7 + H2SO4. The determination was made from the amount of CR(6) consumed, by adding excess Mohr's salt and titrating with a standard solution of KMnO4. The amount of Cr(6) self reduced was determined in a blank test. Optimum oxidation and conditions were achieved when the volumes of 5% k2Cr2Oz and H2SO4 were equal. The mixture was boiled for 1-2 hours using a reflex condenser. The volume should not be reduced, in order to avoid an increase in the sulfuric acid concentration. The relative error was 4-7% for 0.005-0.04 g C and less than or equal to 3.5% for 0.1 g C.

Mashkovich, L.↗

NASA NTRS1978

Use of accelerated helium-3 ions for determining oxygen and carbon impurities in some pure materials

Methods are developed for the determination of O impurity in Be and Si carbide and concurrent determination of C and O impurities in Si and W by irradiation with accelerated He-3 ions and subsequent activity measurements of C-11 and F-18 formed from C and O with the aid of a gamma-gamma coincidence spectrometer. Techniques for determining O in Ge and Ga arsenide with radiochemical separation of F-18 are also described.

Aleksandrova, G. I.↗

NASA NTRS1978

Determining crustal strain rates with a spaceborne geodynamics ranging system. 2: Station coordinate analysis

The use of a spaceborne geodynamics ranging system for determining crustal strain rates is analyzed. The use of site coordinates rather than intersite baseline distances for the strain rate determinations is emphasized. After discussing the analytical techniques which are to be employed, numerical results are presented which suggest that the use of site coordinates would result in a 20-70% improvement in the precision of the deduced values of straining. Precision of a few parts in 10 to the 9th power would be achievable with simple geometrics and a decade or two of measurements; precisions of a few parts in 10 to the 8th power would be achievable in a few years. A consideration of possible correlations among the derived target site coordinates leads to the conclusion that, with the proper choice of coordinate systems, the correlations can be made small and non-detrimental to the strain rate determinations.

Cohen, S. C.↗

NASA NTRS1977

Single-axis attitude determination accuracy

This paper extends the analysis of attitude determination accuracy introduced at the 1975 American Astronautical Society/American Institute of Aeronautics and Astronautics (AAS/AIAA) Astrodynamics Conference. It contains more generalized expressions, new geometrical relations, and additional applications. A complete set of attitude accuracy equations for both arc-length (portion of a great circle) and rotation-angle (dihedral angle) measurements are presented. These expressions can then be applied to determine the geometrical conditions under which a specified accuracy can be achieved by using either the attitude or a selected reference-vector direction as the independent variable. Representative applications to attitude determination accuracy studies and launch window analyses are discussed. The clear physical interpretation and straightforward graphical procedures greatly simplify mission analysis, maneuver planning, hardware configuration studies, and interpretation of results.

Chen, L. C.↗

NASA NTRS1979

A new basis for the determination of fracture toughness

A study is presented which shows that the growth of the plastic zone and the constraint in a compact tension specimen depends significantly on specimen width. The analysis permits the estimation of the contribution of the growth of plastic zone to the deviation from linearity. The contribution of the crack growth to the deviation from linearity is evaluated from the analysis of a typical R-curve data. A combination of these two analyses enables one to define a very simple procedure for the determination of fracture toughness. The fracture toughness is defined as the stress intensity value at which the crack extension starts. The good agreement between analytical results and experimental KQ and KIC values determined over a wide range of thicknesses, widths, and materials justifies the proposed procedures. The KIC determined according to this procedure is independent of specimen width and such a procedure enhances the range of applicability of the K concept to a wider combination of configurations and materials.

Banerjee, S.↗

NASA NTRS1978

A method of determining spectral analytical dye densities

A straightforward method for the user of color imagery to determine the spectral analytical density of dyes present in the processed imagery is presented. The method involves exposing a large number of different color patches on the film which span the gamut of the film's imaging capabilities. From integral spectral density measurements at 16 to 19 different wavelengths, the unit spectral dye curves for each of the three dyes present were determined in two different types of color films. A discussion of the use of these spectral dye densities to determine the transformation between integral density measurements and analytical density is presented.

Scarpace, F. L.↗

NASA NTRS1978

Orbit determination accuracies using satellite-to-satellite tracking

The results are reported of the ATS-6/GEOS-3 and the ATS-6 Nimbus-6 satellite-to-satellite orbit determination experiments. NASA intends to use the tracking data relay satellite system for operational orbit determination of NASA satellites. Hence, in the near future, satellite-to-satellite tracking data will be routinely processed to obtain orbits. The satellite-to-satellite tracking system used in the ATS-6/Nimbus-6 and ATS-6/GEOS-3 experiments performed with a resolution of 1 to 2 m in range and less than 1 mm/s in range rate for a 10-s averaging. A Bayesian least squares estimation technique utilizing independent ranging to the synchronous relay satellite was determined to be the most effective procedure for estimating orbits from satellite-to-satellite tracking data. The use of this technique yields estimates of user satellite orbits which are comparable in accuracy to what is usually obtained from ground based systems.

Vonbun, F. O.↗

NASA NTRS1979

Total ozone determination by spectroradiometry in the middle ultraviolet

A method has been developed to determine total ozone from multispectral measurements of the direct solar irradiance. The total ozone is determined by a least squares fit to the spectrum between 290 nm and 380 nm. The aerosol extinction is accounted for by expanding it in a power series in wavelength; use of the linear term proved adequate. A mobile laboratory incorporating a sky scanner has been developed and used to obtain data to verify the method. Sun tracking, wavelength setting of the double monochromator, and data acquisition are under control of a minicomputer. Results obtained at Wallops Island, Virginia, and Palestine, Texas, agree well with simultaneous Dobson and Canterbury spectrometer and balloon ECC ozonesonde values. The wavelength calibration of the monochromator and the values for the normalized ozone absorption are the most important factors in an accurate determination of total ozone.

Garrison, L. M.↗

NASA NTRS1979

New determinations of far-side lunar radii from Apollo photography

Determinations of far side lunar radii based on the reduction of photogrammetric measurements derived from Apollo 16 photographs obtained during the trans-earth phase of the spacecraft trajectory are presented. Reduction is accomplished by determining the Apollo 16 metric camera orientation relative to control points on the lunar surface whose coordinates are known exactly, than charting the surface on the basis of data coverage. The positions of 66 surface features in the area between longitudes 90 and 130 deg E and 10 and 60 deg N relative to the center of mass of the moon, with a relative accuracy of 500 km, are presented. A topographical map which can resolve basin-sized features has been derived from radius determinations. It is found that the craters Fabry, Riemann and Szilard comprise a topographically depressed region about 500 km in diameter with a floor 2.4 to 3.4 km below the 1730.0 km reference sphere and 4.8 to 5.8 km below the northern rim of the unfilled basin.

Mohan, S. N.↗

NASA NTRS1978

Forward-bias capacitance and current measurements for determining lifetimes and band narrowing in p-n junction solar cells

A new method is described and illustrated for determining the minority-carrier diffusion length and lifetime in the base region of p-n junction solar cells. The method requires only capacitance measurements at the device terminals and its accuracy is estimated to be + or - 5%. It is applied to a set of silicon p-n junction devices and the values of the diffusion lengths agree with those obtained using the current response to X-ray excitation but disagree with those obtained by the OCVD method. The reasons for the relative inaccuracy of OCVD applied to silicon devices are discussed. The capacitance method includes corrections for a two-dimensional fringing effects which occur in small area devices. For a device having highly-doped base region and surface (emitter) layer, the method can be extended to enable the determination of material properties of the degenerately doped surface layer. These material properties include the phenomenological emitter lifetime and a measure of the energy band-gap narrowing in the emitter. An alternate method for determining the energy band-gap narrowing from temperature dependence of emitter current is discussed and demonstrated.

Neugroschel, A.↗

NASA NTRS1979

A Geos 3 Orbit determination experiment

The purpose of this experiment was to investigate the value of altimetry data in high-precision satellite orbit determination. To accomplish this, software was developed to process laser, C-band, doppler and altimeter data singly or jointly. Initially, orbit determination studies were undertaken using synthetic data to validate the software. As data became available, preliminary experiments were carried out. When all the data became available, an intensive study was made covering a 4-day span in 1976. The results showed that even with sparse altimeter data it was possible to accurately determine the semimajor axis and eccentricity with altimeter data only. When altimeter data was supplemented with (as few as) two C-band passes, high-precision ephemerides were obtained. Using two laser passes to supplement the altimetry data did not achieve that same high precision. This is probably because the geographic location (mid-Atlantic) of the highly accurate laser data were such that they did not ideally complement the available (south Atlantic and Indian Ocean) altimeter data.

Pisacane, V. L.↗

NASA NTRS1979

The strategy and technique in determining the orbits of the Pioneer Venus multiprobe bus and probes

The Venus Multiprobe Mission presented the greatest degree of complexity for an Orbit Determination task inasmuch as the spacecraft was composed of a bus, a large probe, and three small probes, all of which impacted the planet at various times and locations. In addition, there were eight major maneuvers for the purpose of spacecraft-probe separation and trajectory retargeting. The multiprobe antenna polarization, antenna offset from the spin axis, and spacecraft rotation introduce signatures into the radiometric Doppler data. These signatures, especially in regard to effects seen in Doppler residuals, further increase the complexity of the orbit determination problem. This paper describes the strategy and technique in using this Doppler data to determine the orbits of the multiprobe bus, the large probe, and the three small probes.

Wong, S. K.↗