Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Exposure History and its Effect Towards Stabilizing Li Exchange Across Disordered Rock Salt Interfaces

Abstract The application of lithium rich disordered rock salts (DRX) as cathode materials has greatly expanded the materials space for high energy density cathodes. These materials are able to consistently achieve capacities higher than via a complex percolation based intercalation mechanism. Most current DRX materials face significant capacity fade when cycled over an extended period. One of the factors responsible for this could be deleterious side effect of interface reactions between the electrode and electrolyte at high voltage. We aim to focus on one aspect of this interaction, i.e the effect of exposure to electrolyte on the surface and its effect on the electrochemical properties of (LMNOF) powder. LMNOF was systematically treated in an electrolyte solution for varying periods of time at an elevated temperature. Treated samples exhibit surface layer modification (removal of F rich surface layer), leading to a 10 % improvement in the capacity retention behavior of LMNOF. Surface and bulk based measurements indicate an increase in disorder and gradual removal of F and Li. All of these processes mimic an aging process similar to cycling. This a priori formed interface allows for increased stability with respect to retention of capacity and oxygen loss.

Satish, Rohit↗
DOE OSTI2023

Deconvoluting Structures of Component Plant Biopolymers Using Deuterium Labeled Brassica oleracea Stems

Several Brassica species are cultivated globally for the production of seed oils as food, lubricants, and increasingly biofuels. The stem and leaf residues of these herbaceous dicotyledonous crops constitute another feedstock for biofuels and other products. Plant cell walls are complex, multipolymeric structures that consist primarily of polysaccharides and lignin. Cellulose chains coalesce to form crystalline microfibrils while the amorphous biopolymers, hemicellulose, and lignin form a network structure and fill the interstitial space. Neutron scattering has been used for the structural study of the assembly and deconstruction of the plant cell walls. However, similar neutron sensitivity of the different amorphous biopolymers has made structural association to individual component biopolymers nontrivial and ambiguous. To improve the association of structural features to specific biopolymer components, partial deuteration of the plant cell wall can be employed to increase the difference in the neutron scattering length density between amorphous carbohydrate and lignin plant polymers. Vegetative stems from partially deuterated Brassica oleracea acephala (kale) plants were obtained commercially, and the plant cell wall structures were studied by contrast-variation small-angle neutron scattering (CV-SANS) and Fourier-transform infrared spectroscopy (FTIR). FTIR results indicated that deuterium substitution for hydrogen in the carbohydrates was higher than that in lignin. By combining CV-SANS and FTIR results, the neutron scattering length density (nSLD) of the polysaccharides and lignin was determined to match nSLD of 65%:35% and 48%:52% D 2 O/H 2 O solvent mixtures, respectively. These nSLD values were higher than the nSLD values of polysaccharides and lignin for H 2 O grown biopolymers. The nSLD increase correlates to replacing about 42.5% of hydrogens present as both C–H and O–H groups in cellulose with deuterium atoms, while only 21% for lignin. In conclusion, this study lays the foundation to use partially deuterated plants to deconvolute structural features of the different component biopolymers, especially cellulose, hemicellulose, and lignin, of the plant cell wall without introducing unintended structural modifications due to the pretreatment extraction processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemical Design of Spin Frustration to Realize Topological Spin Glasses

Patterning spins to generate collective behavior is at the core of condensed matter physics. Physicists develop techniques, including the fabrication of magnetic nanostructures and precision layering of materials specifically to engender frustrated lattices. As chemists, we can access such exotic materials through targeted chemical synthesis and create new lattice types by chemical design. Here, in this study, we introduce a new approach to induce magnetic frustration on a modified honeycomb lattice through a competition of alternating antiferromagnetic (AFM) and ferromagnetic (FM) nearest-neighbor interactions. By subtly modulating these two types of interactions through facile synthetic modifications, we created two systems: (1) a topological spin glass and (2) a frustrated spin-canted magnet with low-temperature exchange bias. To design this unconventional magnetic lattice, we used a metal–organic framework (MOF) platform, Ni 3 (pymca) 3 X 3 (NipymcaX where pymca = pyrimidine-2-carboxylato and X = Cl, Br). We isolated two MOFs, NipymcaCl and NipymcaBr, featuring canted Ni 2+ -based moments. Despite this similarity, differences in the single-ion anisotropies of the Ni 2+ spins result in distinct magnetic properties for each material. NipymcaCl is a topological spin glass, while NipymcaBr is a rare frustrated magnet with low-temperature exchange bias. Density functional theory calculations and Monte Carlo simulations on the NipymcaX lattice support the presence of magnetic frustration as a result of alternating AFM and FM interactions. Our calculations enabled us to determine the ground-state spin configuration and the distribution of spin–spin correlations relative to paradigmatic kagomé and triangular lattices. This modified honeycomb lattice is similar to the electronic Kekulé-O phase in graphene and provides a highly tunable platform to realize unconventional spin physics.

Exchange bias↗
DOE OSTI2024

Early dark energy constraints with late-time expansion marginalization

Abstract Early dark energy (EDE) is an extension to the ΛCDM model that includes an additional energy density contribution near recombination. The model was proposed to reduce the tension between the measurements of the Hubble constantH 0 from the cosmic microwave background (CMB) and from the local cosmic distance ladder. Some analyses in the recent literature have shown intriguing hints for EDE. However, this model increases the tension in the derived clustering of galaxies (as measured by the so-calledS 8 parameter) between CMB and large scale structure (LSS) measurements. This new tension limits the contribution of EDE during recombination, and thus its effect on the Hubble tension. In this work, we investigate whether the inclusion of a general, smooth late-time dark energy modification can increase back the EDE contribution when LSS data is included in the analysis. In order to generalize the late expansion with respect to the ΛCDM model, we substitute the cosmological constant by a late dark energy fluid model with a piecewise constant equation of state w(z) in redshift bins. We show that, when analysing this generalized model with combinations of CMB, LSS and type Ia supernovae data from several experiments no significant changes onS 8 and EDE parameter constraints is found. The contribution to the EDE fraction constraint with late-time expansion marginalization isf EDE = 0.067 +0.019 -0.027 using 3 redshift bins, with similar results for 5 and 10 redshift bins. This work shows that in order to solve simultaneously the Hubble andS 8 tensions, one needs a mechanism for increasing the clustering of matter at late times different from a simple change in the background evolution of late dark energy.

Astronomy & Astrophysics↗
DOE OSTI2023

Low Cost Glass-Ceramic Matrix Composite Heat Exchanger

As part of ARPA-E’s High Intensity Thermal Exchange through Materials and Manufacturing Processes (HITEMMP) program, this project sought to develop novel heat exchanger (HX) capabilities to enable efficient and power dense power generation cycles. This class of HX comes under the category of ceramic/composite materials with the higher temperature goal in the program of ≥1100 °C inlet temperature operation. The enabling capability of this effort is the use of glass-ceramic matrix composite (GCMC) material which provides the high temperature durability of a ceramic, the flaw tolerance of a composite, a significantly faster and lower cost manufacturing process than conventional matrix CMCs and very low porosity levels < 0.5%. For thin-walled HX structures and the need to minimize leakage, the low porosity differentiator is particularly important. RTRC has prior experience with this material system and in the current project advanced the component design and manufacturing methods into new territory to produce features required for effective heat exchange under high pressures. In this approach, silicon carbide fiber is fabricated into a fiber preform using various textile processes. Graphite tooling is used both during the build-up of the fiber preform (interior tooling) and after the fiber preform has been completed (exterior tooling). This tooling assembly is heated to high temperature in an environment that has been evacuated and backfilled with inert gas. A reservoir of specialty glass is present and once the desired temperature has been reached to achieve the desired glass viscosity, an actuator distributes the glass throughout the fiber preform using passageways which are part of the tooling design in a process known as glass transfer molding. After the tooling has been removed, the composite is heat treated to convert the amorphous glass to a crystalline ceramic, providing improved properties. The project was divided into three phases focusing on the following: 1) 10 kW HX design and coupon-level tube sheet fabrication, 2) 10 kW HX fabrication, 3) 50 kW HX fabrication. During Budget Period 1 (BP1), additional risks were encountered and the need for additional funds was agreed upon by ARPA-E program leadership. Due to a variety of factors, the contract modification required nominally 18 months to execute at which time the HITEMMP program was effectively concluding. Because of this and the time that would be required to perform BP2 tasks, it was decided to conclude the project at the end of BP1. During the design of the 10 kW HX, manufacturing constraints were learned and incorporated, leading to a revised configuration for the fiber preform and HX. Heat exchange and pressure drop predictions also played a role in modifying the original design concept to be a higher aspect ratio shell-and-tube HX, simplifying the manufacturing process and improving the heat exchanger performance. Good gravimetric and volumetric thermal power densities of 11.2 kW/kg and 10,200 kW/m3 for the entire HX were projected that involved thermo-structural Finite Element Analysis to determine the structural mass needed for the high operation pressures of 250 bar cold inlet and 80 bar hot inlet. Fiber preforms using textile processes were produced for multiple headered tube sheets. Additional challenges were encountered during the glass transfer molding step for which solutions were identified, but programmatics did not allow them to be implemented in BP1. While complete HX test articles were not fabricated, the benefits of this GCMC material for a variety of high temperature applications remain.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

Defect Chemistry in High‐Voltage Cathode Materials for Lithium‐Ion Batteries

High-voltage cathodes (HVCs) have emerged as a paramount role for the next-generation high-energy-density lithium-ion batteries (LIBs). However, the pursuit of HVCs comes with inherent challenges related to defective structures, which significantly impact the electrochemical performance of LIBs. The current obstacle lies in the lack of a comprehensive understanding of defects and their precise effects. This perspective aims to provide insights into defect chemistry for governing HVCs. The classifications, formation mechanisms, and evolution of defects are outlined to explore the intricate relationship between defects and electrochemical behavior. The pressing need for cutting-edge characterization techniques that comprehensively investigate defects across various temporal and spatial scales is emphasized. Building on these fundamental understandings, engineering strategies such as composition tailoring, morphology design, interface modification, and structural control to mitigate or utilize defects are thoroughly discussed for enhanced HVCs performance. Furthermore, these insights are expected to provide vital guidelines for developing high-performance HVCs for next-generation high-energy lithium-ion batteries.

cross-scale characterization↗
DOE OSTI2024

S. elongatus PCC 7942 Carbon Metabolism Proteomics (MC-DP2)

The purpose of this experiment was to examine the redox proteome of S. elongatus PCC 7942 CscB/SPS under different light conditions (light and dark) and culture conditions (dense and dilute optical density). Samples were processed using a resin-assisted capture (RAC) workflow with TMT labeling to enrich and quantify protein cysteines which were differentially oxidized under four conditions. The datasets were generated by a Q Exactive Plus Orbitrap Mass Spectrometer coupled with a Waters nanoAcquity UPLC, then searched by MSGF+ for downstream redox PTM analysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Hydropower Geotechnical Foundations: Current Practice and Innovation Opportunities for Low-Head Applications

Hydropower is a renewable energy resource that produces electricity from flowing water under pressure. Engineered hydropower structures, such as dams, are used to create a hydraulic head, enabling a turbinegenerator unit to convert pressurized flow into electricity. While hydropower has been a source of renewable energy since antiquity, new development in the United States has slowed in recent decades. Based on recent resource assessments, the largest opportunity to expand hydropower in the United States is from new stream-reach development (i.e., new hydropower development along stream-reaches that do not currently have hydroelectric facilities or other forms of infrastructure, such as dams). Roughly 75% of identified new stream-reach development potential is from low-head sites (less than 30 ft of head), which typically suffer from smaller power densities and higher normalized costs, given economies of scale. Hydropower developers and other stakeholders are thus interested in strategies to reduce initial capital costs while practicing sustainable development to maximize environmental compatibility with minimal disruption to natural aquatic life, sediment, and water flows. Historically, civil works have represented a significant cost driver for new hydropower development, with the foundation system representing a major cost component and source of uncertainty. The foundation system is the collection of engineered structural features (e.g. cutoff trenches, walls, grouting, anchors) constructed at or below the preconstruction ground surface that interfaces between the overlying structures (superstructures) and the bed material below (subsurface). Development of a hydropower foundation system must consider the various characteristics of the surrounding stream environment and subsurface while adhering to the engineering requirements of the superstructure that it supports. The care of water, excavation, and other construction activities are important features of foundation design and construction. The design and construction cost of the foundation system is largely dependent on the site geology and riverbed composition and is influenced by the level of geotechnical assessment required and conducted. Thus, a hydropower facility’s geotechnical foundation is often highly site-specific, with proper site selection and assessment being important to project success. The foundation system is designed to provide structural stability (of the foundation and dam), limit seepage, ensure public safety, and maintain functionality for the project life, during both construction and facility operations. Inadequate foundation or dam design can result in dam failure and the uncontrolled release of significant volumes of water, which could cause a high number of casualties and extensive property damage downstream of the failure. According to the Association of State Dam Safety Officials, approximately 30% of all historical dam failures in the United States are attributed to foundation or abutment defects, and another 20% are attributed to piping or seepage through the embankment, foundation, or abutment. To ameliorate these safety considerations, foundations often require massive amounts of construction material (e.g., grout, concrete, engineered dam fill) and long construction times. Foundation design also requires significant analysis prior to construction because the initial in-stream and abutment subsurface conditions are site-specific, and sufficient data for them often are lacking. Current practice requires on-site assessment, using expensive drilling and invasive and non-invasive investigation methods, to determine the expected cost of foundation material and treatment. Additionally, foundation construction often requires site dewatering (and other care of water activities), which involves constructing temporary diversion structures upstream and often downstream, called cofferdams, and water diversion systems that route water around the construction site. Cofferdams and water diversion systems can drastically increase construction costs and contribute to environmental disruption, including modification of flow patterns and benthic habitats. Given the technical, economic, and environmental challenges associated with hydropower foundations, opportunities exist to improve the current state of practice and to develop new and innovative solutions to Hydropower is a renewable energy resource that produces electricity from flowing water under pressure. Engineered hydropower structures, such as dams, are used to create a hydraulic head, enabling a turbinegenerator unit to convert pressurized flow into electricity. While hydropower has been a source of renewable energy since antiquity, new development in the United States has slowed in recent decades. Based on recent resource assessments, the largest opportunity to expand hydropower in the United States is from new stream-reach development (i.e., new hydropower development along stream-reaches that do not currently have hydroelectric facilities or other forms of infrastructure, such as dams). Roughly 75% of identified new stream-reach development potential is from low-head sites (less than 30 ft of head), which typically suffer from smaller power densities and higher normalized costs, given economies of scale. Hydropower developers and other stakeholders are thus interested in strategies to reduce initial capital costs while practicing sustainable development to maximize environmental compatibility with minimal disruption to natural aquatic life, sediment, and water flows. Historically, civil works have represented a significant cost driver for new hydropower development, with the foundation system representing a major cost component and source of uncertainty. The foundation system is the collection of engineered structural features (e.g. cutoff trenches, walls, grouting, anchors) constructed at or below the preconstruction ground surface that interfaces between the overlying structures (superstructures) and the bed material below (subsurface). Development of a hydropower foundation system must consider the various characteristics of the surrounding stream environment and subsurface while adhering to the engineering requirements of the superstructure that it supports. The care of water, excavation, and other construction activities are important features of foundation design and construction. The design and construction cost of the foundation system is largely dependent on the site geology and riverbed composition and is influenced by the level of geotechnical assessment required and conducted. Thus, a hydropower facility’s geotechnical foundation is often highly site-specific, with proper site selection and assessment being important to project success. The foundation system is designed to provide structural stability (of the foundation and dam), limit seepage, ensure public safety, and maintain functionality for the project life, during both construction and facility operations. Inadequate foundation or dam design can result in dam failure and the uncontrolled release of significant volumes of water, which could cause a high number of casualties and extensive property damage downstream of the failure. According to the Association of State Dam Safety Officials, approximately 30% of all historical dam failures in the United States are attributed to foundation or abutment defects, and another 20% are attributed to piping or seepage through the embankment, foundation, or abutment. To ameliorate these safety considerations, foundations often require massive amounts of construction material (e.g., grout, concrete, engineered dam fill) and long construction times. Foundation design also requires significant analysis prior to construction because the initial in-stream and abutment subsurface conditions are site-specific, and sufficient data for them often are lacking. Current practice requires on-site assessment, using expensive drilling and invasive and non-invasive investigation methods, to determine the expected cost of foundation material and treatment. Additionally, foundation construction often requires site dewatering (and other care of water activities), which involves constructing temporary diversion structures upstream and often downstream, called cofferdams, and water diversion systems that route water around the construction site. Cofferdams and water diversion systems can drastically increase construction costs and contribute to environmental disruption, including modification of flow patterns and benthic habitats. Given the technical, economic, and environmental challenges associated with hydropower foundations, opportunities exist to improve the current state of practice and to develop new and innovative solutions to challenges frequently encountered with traditional approaches. With this understanding, it is critically important to understand and document the current state of practice for hydropower geotechnical foundations, identify key challenges, and define opportunities for innovative solutions. To this end, this report documents the current state of practice across the three main phases of geotechnical foundation development: (1) geotechnical site assessment, (2) design, and (3) construction for hydropower systems. It also describes the major challenges with conventional approaches and identifies opportunities for innovation to reduce hydropower foundations costs, timelines, and risks. Key takeaways from this report include the following: Approximately 80% of available low-head sites are expected to have foundations on soil beds rather than rock beds, suggesting that rockfill and earthfill dams may be the most cost-effective conventional dam type for new projects.; Geotechnical and geologic investigation activities are time-consuming and expensive but are essential to define the parameters and criteria needed for foundation design.; Certain riverbed soil and bedrock types present significant technical challenges or require expensive foundation construction, which can prove financially prohibitive for low-head project development.; Modular hydropower design and prefabricated modular foundations represent a promising but unproven paradigm for new hydropower development. Design and construction approaches using optimized and highly repeatable, reliable components would benefit project cost, time, and risk but require additional research and development.; Temporary construction features for foundations, including cofferdams, water diversion, and water control systems, can prove costly and have inherent construction risk.; For economically viable development, hydropower geotechnical foundations should be limited to 4 to 15% of the project’s total initial capital costs. Many proposed projects have experienced cost overruns attributable to foundation difficulties or surprises during construction. These overruns may have been due to inadequate investigations, lack of adequate engineering effort to tailor the structures to site geology and topography, and/or contractual terms, among other considerations.; Challenges for hydropower foundations and opportunities for innovative technology solutions are identified in the following areas (consistent with the three main phases of foundation development): Geotechnical site assessment, Foundation design and materials, Construction methods and technology. Ultimately, this report aims to provide information about geotechnical foundations for low-head hydropower and to motivate transformative technologies to support hydropower growth.

13 HYDRO ENERGY↗
DOE OSTI2021

Ag-doped As–S–Se chalcogenide glasses: a correlative study of structural and dielectrical properties

This work is focused on investigating the effect of Ag doping on the dielectric and structural properties of the As–S–Se glass system and their suitability for potential applications in optoelectronics, such as electronic and switching components. A series of glasses from the system Agx(As40S30Se30)100-x (x = 5 at.% Ag) were prepared with melt-quenching technique. Morphological and compositional analysis was performed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Raman spectroscopy measurements have shown structural modifications of the glass network upon Ag doping, with creation of new Ag–(S,Se)–As structures, resulting in increased number of defect states. Variations in dielectric permittivity (e') and dielectric loss (e") were investigated in a wide frequency and temperature range, and explained by dominant dipolar and electronic polarization, as well as correlated with the observed structural changes. Improvement in dielectric properties is observed upon doping with Ag. Furthermore, the low dielectric tangent loss at high frequencies for all glassy samples points to a beneficial ability of the material to absorb energy of the external electric field. Good thermal stability of these glasses is confirmed by the calculated temperature coefficient of the dielectric permittivity. Density of localized states in all glasses was determined from AC conductivity and the dielectric tangent loss using a correlated barrier hopping model, and found to increase with Ag concentration. The overall results suggest that Ag doping enhances the electrical and optical quality of this type of glasses, making them suitable as nonlinear optical materials and their applications in devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Prediction of orbital-selective Mott phases and block magnetic states in the quasi-one-dimensional iron chain Ce 2 O 2 FeSe 2 under hole and electron doping

The recent detailed study of quasi-one-dimensional iron-based ladders, with the 3d iron electronic density n=6, has unveiled surprises, such as orbital-selective phases. However, similar studies for n=6 iron chains are still rare. Here a three-orbital electronic Hubbard model was constructed to study the magnetic and electronic properties of the quasi-one-dimensional n=6 iron chain Ce 2 O 2 FeSe 2 , with focus on the effect of doping. Specifically, introducing the Hubbard U and Hund J H couplings and studying the model via the density matrix renormalization group, we report the ground-state phase diagram varying the electronic density away from n=6. For the realistic Hund coupling J H /U=1/4, several electronic phases were obtained, including a metal, orbital-selective Mott, and Mott insulating phases. Doping away from the parent phase, the competition of many tendencies leads to a variety of magnetic states, such as ferromagnetism, as well as several antiferromagnetic and magnetic “block” phases. In the hole-doping region, two different interesting orbital-selective Mott phases were found: OSMP1 (with one localized orbital and two itinerant orbitals) and OSMP2 (with two localized orbitals and one itinerant orbital). Moreover, charge disproportionation phenomena were found in special doping regions. We argue that our predictions can be tested by simple modifications in the original chemical formula of Ce 2 O 2 FeSe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Wake forces in a background of quadratically coupled mediators

Two particles can exert forces on each other when embedded in a sea of weakly coupled particles. These “wake forces” occur whenever the source and target particles have quadratic interactions with the mediating particles; they are proportional to the ambient energy density and typically have a range of order the characteristic de Broglie wavelength of the background. The effect can be understood as source particles causing a disturbance in the background waves—a wake—which subsequently interacts with the target particles. Wake forces can be mediated by bosons or fermions, can have spin dependence, may be attractive or repulsive, and have a generally anisotropic spatial profile and range that depends on the phase-space distribution of the ambient particles. In this work, I investigate the application of wake forces to dark matter searches, recast existing limits on short-range forces into leading constraints on dark matter with quadratic couplings, and sketch out potential experimental modifications to optimize sensitivity. Wake forces occur in the Standard Model: the presence of the cosmic neutrino background induces a millimeter-range force about 22 orders of magnitude weaker than gravity. Wake forces may also be relevant in condensed-matter and atomic physics. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2023

Resolving Diverse Oxygen Transport Pathways Across Sr‐Doped Lanthanum Ferrite and Metal‐Perovskite Heterostructures

Abstract Perovskite structured transition metal oxides are important technological materials for catalysis and solid oxide fuel cell applications. Their functionality often depends on oxygen diffusivity and mobility through complex oxide heterostructures, which can be significantly impacted by structural and chemical modifications, such as doping. Further, when utilized within electrochemical cells, interfacial reactions with other components (e.g., Ni‐ and Cr‐based alloy electrodes and interconnects) can influence the perovskite's reactivity and ion transport, leading to complex dependencies that are difficult to control in real‐world environments. Here, this work uses isotopic tracers and atom probe tomography to directly visualize oxygen diffusion and transport pathways across perovskite and metal‐perovskite heterostructures, that is, (Ni‐Cr coated) Sr‐doped lanthanum ferrite (La 0.5 Sr 0.5 FeO 3 ; LSFO). Annealing in 18 O 2(g) results in elemental and isotopic redistributions through oxygen exchange (OE) in the LSFO while Ni‐Cr undergoes oxidation via multiple mechanisms and transport pathways. Complementary density functional theory calculations at experimental conditions provide rationale for OE reaction mechanisms and reveal a complex interplay of different thermodynamic and kinetic drivers. These results shed light on the fundamental coupling of defects and oxygen transport in an important class of catalytic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

NaSICON-type materials for lithium-ion battery applications: Progress and challenges

Lithium-ion batteries (LIBs) are widely used in electric vehicles, energy storage, smart grids, and portable devices due to their high average output voltage and energy density. NaSICON-type materials have been identified as potential candidates for electrode and solid electrolyte materials for LIBs due to their 3D framework, which contains Li + ions, excellent ionic conductivity, and thermal stability. NaSICON-type materials have a 3D framework and a fast Li + diffusion pathway, making them suitable for use in LIBs. However, their application as solid electrolytes is limited due to poorer ionic conductivity and interfacial stability compared to commercialized liquid electrolytes. Furthermore, their use as electrode materials is restricted by their low electronic conductivity. Here, this review provides an overview of NaSICON-type materials, including their common structure, Li + diffusion mechanism, and preparation strategies. The article also discusses the application and modification strategies of NaSICON-type materials for LIBs, classifying them as anode materials, cathode materials, and solid electrolyte materials. Additionally, the potential use of NaSICON-type materials as modification materials for cathode materials for LIBs is briefly mentioned. Building on previous work on NaSICON-type materials, we propose potential areas for further development and wider applications of these materials in LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Impact of Chiral Symmetry Breaking on Spin-Texture and Lone Pair Expression in Chiral Crystals of Hybrid Antimony and Bismuth Halides

Chiral organic building blocks can be incorporated into hybrid organic-inorganic metal-halide crystalline semiconductors so as to control and impact the interconversion between light, charge, and spin. Here, we report a series of hybrid antimony and bismuth halide materials of the general formula MBA 4 B 2 X 10 (B = Sb 3+ , Bi 3+ ; X = Br - , I - ) and study how chiral symmetry breaking imposed by the templating organic chiral methylbenzylammonium (MBA) cations induces symmetry breaking within the inorganic sublattice and leads to a unique spin-texture. The chiral MBA cations introduce two structural modifications to the metal-halide sublattice that consists of isolated edge-sharing dimers of B 2 X 10 octahedra: (1) the dimers have a chiral spatial arrangement with respect to one another and (2) there is an asymmetric distortion of the two subunits within the individual dimers with a higher distortion caused by strong stereochemical activity of the Sb 5s 2 lone pair electrons. The structural distortions and chiral arrangement result in circular dichroism (CD) at the band edge of the inorganic framework with dissymmetry factors in the range of 10 -4 . Chiral spin-splitting of the inorganic states, caused by breaking of the inversion symmetry and large spin-orbit coupling, is studied via density functional theory (DFT), and a multiband effective mass theory was developed that links the DFT-derived spin-splitting of helical character (i.e., spin expectation value not perpendicular to the crystal momentum) to the observed CD. Furthermore, we also find broad red photoluminescence from the MBA 4 Sb 2 Br 10 compounds, which we attribute to self-trapped excitonic emission driven by the large distortion due to the lone pair expression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heteroatom-Doped Graphenes as Actively Interacting 2D Encapsulation Media for Mg-Based Hydrogen Storage

Nanoencapsulation using graphene derivatives enables the facile fabrication of two-dimensional (2D) nanocomposites with unique microstructures and has been generally applied to many fields of energy materials. Particularly, metal hydrides such as MgH 2 encapsulated by graphene derivatives have emerged as a promising hybrid material for overcoming the disadvantageous properties of Mg-based hydrogen storage. Although the behavior of the graphene–Mg nanoencapsulation interface has been studied for many composite materials, the direct modification of graphene with nonmetal foreign elements for changing the interfacial behavior has been limitedly reported. In this regard, using B-doped graphene and N-doped graphene as nanoencapsulation media for tuning the interfacial behavior of graphene derivative–Mg nanoparticles, we present altered hydrogen storage kinetics of heteroatom-doped (B and N) graphene–Mg composites. The effect of heteroatom doping is studied in terms of bonding configurations and heteroatom doping concentrations. The enhancement in hydrogen uptake was observed for all of the heteroatom-doped graphene–Mg nanocomposites. On the other hand, a few samples exhibit significantly low activation energy at the early stage of desorption, which can be related to the facilitated nucleus formation. Density functional theory calculation indicates that B-doping and N-doping accelerate hydrogen absorption kinetics in different ways, aiding charge transfer and inducing surface deformation of Mg nanoparticles, respectively. Their effects can be augmented in the presence of structural defects on graphene, such as vacancies, pores, or graphene edges. These results demonstrate that hydrogen storage kinetics of Mg-based systems can be altered by utilizing heteroatom-doped graphene oxide derivatives as 2D nanoencapsulation media, suggesting that the addition of a nonmetal doping element can also be applied to Mg-based hydrogen storage by modifying the nanoencapsulation interface without forming Mg alloy phases.

08 HYDROGEN↗
DOE OSTI2022

Stabilization of Ultrasmall Platinum Nanoparticles by Nitrogen-Doped Carbon: Implications for Catalysis and Electrocatalysis

Heterogeneous materials comprising platinum nanoparticles on carbon supports have numerous applications including fuel cell electrodes and heterogeneous catalysts. The effective application of these materials for fuel cells and catalysis will be greatly advanced by the ability to control the oxidation and sintering of the nanoparticles by modifications of the carbon support. One attempt of such control has been doping carbon supports with nitrogen. Here, in this work, a cutting-edge, high-sensitivity, in situ XRD instrument, which allows observation of ultrasmall Pt nanoparticles, has been combined with in situ XPS to provide unprecedented clarity in the characterization of supported Pt nanoparticles in oxidizing and high-temperature environments. On a nitrogen-doped carbon support derived from poly-phenylporphyrin, Pt nanoparticles show increased stability to oxidation and thermal sintering. The enhanced Pt–support interaction arising from the N dopant versus the N-free carbon is manifested by (1) decreased initial Pt particle sizes, (2) small particle size at higher surface densities, (3) increased resistance of Pt nanoparticles to oxidation, (4) increased electron binding energy of Pt0, and (5) increased resistance of Pt nanoparticles to sintering. It is expected that the higher stability of Pt on NC will be manifested in higher activity in fuel cells and high-temperature catalytic reactions.

catalytic reactions↗
DOE OSTI2024

Lithium Dendrite-Free Li 7 N 2 I-LiOH Solid Electrolytes for High Energy Lithium Batteries

All-solid-state lithium batteries (ASSLBs) hold great potential to improve the safety and energy density of today’s lithium-ion batteries by using non-flammable inorganic solid electrolytes. Solid electrolytes (SEs) are believed to prevent Li dendrite growth because of high mechanical strength and high Li+ transference numbers. Significant advances in SE have been achieved, among which, Li7La3Zr2O12 (LLZO) and Li2S–P2S5 (LPS) are the most promising SEs for bulk-type solid-state lithium batteries because of high ionic conductivities (>10-4 S/cm2). However, in contrast to our expectations, the growth of lithium dendrites is not suppressed but is facilitated in LLZOs and LPSs regardless of dopants, porosity, and crystallinity of the electrolytes. Despite the unity Li transference number and over two-times of shear modulus than that of Li metal, the critical current densities for Li plating and stripping in these SEs are less than 1.0 mA cm-2, which is one-fourth to one-tenth of that in liquid electrolytes at room temperature. The incompatibility between LLZO and LPS with Li metal seriously limits the energy density of all-solid-state batteries. The mechanism for lithium dendrite formation and growth in SEs are still disputable. Lack of understanding of the Li dendrite formation mechanism seriously impeded the development of solid-state lithium batteries. The development of the criterion for Li dendrite suppression is essential for the success of solid electrolyte lithium batteries. In this project, a criterion for Li dendrite suppression will be developed through thermodynamics and kinetics analysis of lithium dendrite nucleation/growth, which will guide the solid-state electrolyte design. Li7N2I-LiOH, Li5NI2-LiOH and Li3YCl6 solid electrolyte with high ionic conductivity and low electronic conductivity were used to validate the criterion for lithium dendrite suppression. Different surface modifications were also explored to enhance the dendrite suppression capability of SSEs.

25 ENERGY STORAGE↗
DOE OSTI2020

Li-rich cathodes for rechargeable Li-based batteries: reaction mechanisms and advanced characterization techniques

Due to their high specific capacities beyond 250 mA h g -1 , lithium-rich oxides have been considered as promising cathodes for the next generation power batteries, bridging the capacity gap between traditional layered-oxide based lithium-ion batteries and future lithium metal batteries such as lithium sulfur and lithium air batteries. However, the practical application of Li-rich oxides has been hindered by formidable challenges. To address these challenges, the understanding of their electrochemical behaviors becomes critical and is expected to offer effective guidance for both materials and cell development. This work aims to provide fundamental insights into the reaction mechanisms, electrochemical challenges and modification strategies of lithium-rich oxides. We first summarize the research history, the pristine structures, and the classification of lithium-rich oxides. Then we review the critical reaction mechanisms that are closely related to their electrochemical features and performances, such as lattice oxygen oxidation, oxygen vacancy formation, transition-metal migration, layered to spinel transitions, ‘two-phase mechanism’, and lattice evolution. These discussions are coupled with state-of-the-art characterization techniques. As a comparison, the anionic redox reactions of layered sodium transition metal oxides are also discussed. Finally, after a brief overview of the correlation among the aforementioned mechanisms, we provide perspectives on the rational design of lithium-rich oxides with high energy densities and long-term cycling stability.

25 ENERGY STORAGE↗