Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Wigner distribution function and entropy of the damped harmonic oscillator within the theory of the open quantum systems

The harmonic oscillator with dissipation is studied within the framework of the Lindblad theory for open quantum systems. By using the Wang-Uhlenbeck method, the Fokker-Planck equation, obtained from the master equation for the density operator, is solved for the Wigner distribution function, subject to either the Gaussian type or the delta-function type of initial conditions. The obtained Wigner functions are two-dimensional Gaussians with different widths. Then a closed expression for the density operator is extracted. The entropy of the system is subsequently calculated and its temporal behavior shows that this quantity relaxes to its equilibrium value.

Isar, Aurelian↗
NASA NTRS1996

Electronic Structure of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta)

The core levels of TIBa(sub 2)CaCu(sub 2)O(sub 7-delta) epitaxial films have been measured with x-ray photoelectron spectroscopy (XPS). The valence electronic structure has been determined using the full-potential linear muffin tin orbital band structure method and measured with XPS.

Epitaxial films van Hove Fermi level↗
NASA NTRSDate not supplied

Desensitized Aerocapture Guidance

Mission design flexibility can be increased using an aerocapture maneuver to capture into an orbit around a planet from a hyperbolic trajectory. In past work, bang-bang control has been shown as an optimal guidance solution that minimizes the $\Delta{V}$ required to get into a desired orbit using bank modulation. This work revisits aerocapture using a bank modulation problem to search for an optimal solution using a direct collocation method. Previous studies have shown that aerocapture performance is sensitive to atmospheric density. In the literature, several studies have used a desensitized control approach to make the optimal guidance more robust to uncertainties in the model. To this end, this work aims to develop a desensitized aerocapture guidance robust to uncertainty in atmospheric density. Furthermore, this work compares the robustness of the open-loop desensitized aerocapture guidance with optimal aerocapture guidance with an aerocapture application at Earth.

Pardha Sai Chadalavada↗
NASA NTRSDate not supplied

Desensitized Aerocapture Guidance

Mission design flexibility can be increased using an aerocapture maneuver to capture into an orbit around a planet from a hyperbolic trajectory. In past work, bang-bang control has been shown as an optimal guidance solution that minimizes the $\Delta{V}$ required to get into a desired orbit using bank modulation. This work revisits aerocapture using a bank modulation problem to search for an optimal solution using a direct collocation method. Previous studies have shown that aerocapture performance is sensitive to atmospheric density. In the literature, several studies have used a desensitized control approach to make the optimal guidance more robust to uncertainties in the model. To this end, this work aims to develop a desensitized aerocapture guidance robust to uncertainty in atmospheric density. Furthermore, this work compares the robustness of the open-loop desensitized aerocapture guidance with optimal aerocapture guidance with an aerocapture application at Earth.

Desensitized↗
NASA NTRS2001

Measurement of Microscopic Growth Rates in Float-Zone Silicon Crystals

Time dependent convective flows during crystal growth of doped semiconductors lead to fluctuations of the composition, so called dopant striations. In general, it is difficult to decide which is the main mechanism for the generation of these striations, it might be either the fluctuation of the concentration field in the melt and the extent of the solute boundary layer ahead of the solid-liquid interface or a variation of the growth velocity. Direct access to the concentration field is rather complicated to achieve, especially considering the high process temperature and the chemical activity of liquid silicon. The contribution of growth rate fluctuations to the formation of compositional fluctuations can be determined by measuring microscopic growth rates. The classical method of current pulses requires electrical feed-throughs and good electrical contacts, both are critical issues for the growth of high purity silicon crystals. Using a radiation based heating system, the heating power can be modulated very fast and effectively. We added to the normal heater power a sinusoidal off-set in the frequency range of 1 to 10 Hz, generating a narrow spaced weak rippling in the grown crystals which are superposed to the dopant striations caused by natural and by thermocapillary convection. The pulling speed was varied between 1 and 4mm/min. The microscope images of etched crystals slices have been analyzed by peak-search algorithms (measuring the spacing between each artificially induced marker) and by FFT. Performing growth experiments under a time-dependent flow regime, fluctuations of the microscopic growth velocity of Delta(v)/v(sub average) up to 50% have been measured. Damping the time-dependent convection by the use of an axial, static magnetic field of 500mT, the microscopic growth rate became constant within the resolution limit of this method. The results will be discussed using analytical methods for the calculation of microscopic growth velocity and by comparing them with measurements of temperature fluctuations in the melt during growth experiments itself.

Dold, P.↗
NASA NTRS1992

Microwave properties of peeled HEMT devices sapphire substrates

The focus of this research is to demonstrate the first full radio frequency characterization of high electron mobility transistor (HEMT) device parameters. The results of this research are used in the design of circuits with peeled HEMT devices, e.g. 10 GHz amplifiers. Devices were fabricated using two HEMT structures grown by molecular beam epitaxy methods. A 500 A AlAs release layer for 'peel off' was included under the active layers of the structure. The structures are a homogeneously doped Al(0.3)GA(0.7)As/GaAs and a delta doped square well Al(.23)Ga(.77)As/GaAs HEMT structure. Devices were fabricated using a mesa isolation process. Contacts were done by sequentially evaporating Au/Ge/Au/Ni/Au followed by rapid thermal anneal at 400 C for 15 seconds. Gates were wet etch recessed and 1 to 1.4 micron Ti/Au gate metal was deposited. Devices were peeled off the GaAs substrate using Apiezon wax to support the active layer and a HF:DI (1:10) solution to remove the AlAs separation layer. Devices were then attached to sapphire substrates using van der Waals bonding.

Young, Paul G.↗
NASA NTRS1993

An application of small-gap equations in sealing devices

The study of a thin, incompressible Newtonian fluid layer trapped between two almost parallel, sliding surfaces has been actively pursued in the last decades. This subject includes lubrication applications such as slider bearings or the sealing of non-pressurized fluids with rubber rotary shaft seals. In the present work we analyze numerically the flow of lubricant fluid through a micro-gap of sealing devices. The first stage of this study is carried out assuming that a 'small-gap' parameter delta attains an extreme value in the Navier-Stokes equations. The precise meaning of small-gap is achieved by the particular limit delta = 0 which, within the bounds of the hypotheses, predicts transport of lubricant through the sealed area by centrifugal instabilities. Numerical results obtained with the penalty function approximation in the finite element method are presented. In particular, the influence of inflow and outflow boundary conditions, and their impact in the simulated flow, are discussed.

Vionnet, Carlos A.↗
NASA NTRS1994

Transonic Navier-Stokes calculations about a 65 deg delta wing

A computational study has been conducted in which the CFL3D Navier-Stokes solver coupled with an algebraic and a one-equation nonequilibrium turbulence model has been used to predict the flow over a 65 degree delta wing at transonic conditions for Reynolds numbers ranging from 6 x 10(exp 6) to 120 x 10(exp 6) based on mean aerodynamic chord. Solutions obtained indicated that the computational method when used with the one-equation turbulence model predicts results that compare well with experiment for attached flow conditions. Comparisons with experimental pressure at separated conditions show that the computational method, even though primary flow-field features are predicted well, does not predict secondary flow features.

Londenberg, W. Kelly↗
NASA NTRS1980

Numerical prediction of vortex cores of the leading and trailing edges of delta wings

The purpose of the present paper is to predict the roll-up of the vortex sheets emanating from the leading- and trailing-edges of delta wings with emphasis on the interaction of vortex cores beyond the trailing edge. The motivation behind the present work is the recent experimental data published by Hummel. The Nonlinear Discrete-Vortex method (NDV-method) is modified and extended to predict the leading- and trailing-vortex cores beyond the trailing edge. The present model alleviates the problems previously encountered in predicting satisfactory pressure distributions. This is accomplished by lumping the free-vortex lines during the iteration procedure. The leading- and trailing-edge cores and their feeding sheets are obtained as parts of the solution. The numerical results show that the NDV-method is successful in confirming the formation of a trailing-edge core with opposite circulation and opposite roll-up to those of the leading-edge core. This work is a breakthrough in the high angle of attack aerodynamics and moreover, it is the first numerical prediction done on this problem

Kandil, O. A.↗
NASA NTRS1980

Design optimization of sinusoidal glass honeycomb for flat plate solar collectors

The design of honeycomb made of sinusoidally corrugated glass strips was optimized for use in water-cooled, single-glazed flat plate solar collectors with non-selective black absorbers. Cell diameter (d), cell height (L), and pitch/diameter ratio (P/d) maximizing solar collector performance and cost effectiveness for given cell wall thickness (t sub w) and optical properties of glass were determined from radiative and convective honeycomb characteristics and collector performance all calculated with experimentally validated algorithms. Relative lifetime values were estimated from present materials costs and postulated production methods for corrugated glass honeycomb cover assemblies. A honeycomb with P/d = 1.05, d = 17.4 mm, L = 146 mm and t sub w = 0.15 mm would provide near-optimal performance over the range delta T sub C greater than or equal to 0 C and less than or equal to 80 C and be superior in performance and cost effectiveness to a non-honeycomb collector with a 0.92/0.12 selective black absorber.

Mcmurrin, J. C.↗
NASA NTRS1985

High resolution solutions of the Euler equations for vortex flows

Solutions of the Euler equations are presented for M = 1.5 flow past a 70-degree-swept delta wing. At an angle of attack of 10 degrees, strong leading-edge vortices are produced. Two computational approaches are taken, based upon fully three-dimensional and conical flow theory. Both methods utilize a finite-volume discretization solved by a pseudounsteady multistage scheme. Results from the two approaches are in good agreement. Computations have been done on a 16-million-word CYBER 205 using 196 x 56 x 96 and 128 x 128 cells for the two methods. A sizable data base is generated, and some of the practical aspects of manipulating it are mentioned. The results reveal many interesting physical features of the compressible vortical flow field and also suggest new areas needing research.

Murman, E. M.↗
NASA NTRS1993

Marangoni instability in a liquid layer with two free surfaces

The onset of the Marangoni instability in a liquid layer with two free nearly insulating surfaces heated from below is studied. Linear stability analysis yields a condition for the emergence of a longwave or a finite wavelength instability from the quiescent equilibrium state. Using the method of asymptotic expansions, a weakly nonlinear evolution equation describing the spatiotemporal behavior of the velocity and temperature fields at the onset of the longwave instability is derived. The latter is given by delta(M) = 24, delta(M) being the difference between the upper and the lower Marangoni numbers. It is shown that in some parametric range one convective cell forms across the layer, while in other parametric domains two convective cells emerge between the two free surfaces.

Deissler, Robert J.↗
NASA NTRS1960

Potential Energy Curves for CO

Potential energy curves for the Chi (sup 1) Epsilon (sup plus), alpha (sup 3) II (sub r), alpha prime (sup 3) epsilon (sup plus), d (sup 3) delta, e (sup 3) Epsilon (sup minus), Alpha (sup 1) II, and Beta (sup 1) Epsilon (sup plus), electronic states of the CO molecule have been calculated by the Rydberg-Klein-Rees method. The curve for the A III state will have to bend sharply in the range between 1.9 and 2.1 angstroms or it will have to pass through a maximum to reach the proper dissociation limit.

Tobias, Irwin↗
NASA NTRS1989

Prediction of forces and moments for flight vehicle control effectors: Workplan

Two research activities directed at hypersonic vehicle configurations are currently underway. The first involves the validation of a number of classical local surface inclination methods commonly employed in preliminary design studies of hypersonic flight vehicles. Unlike studies aimed at validating such methods for predicting overall vehicle aerodynamics, this effort emphasizes validating the prediction of forces and moments for flight control studies. Specifically, several vehicle configurations for which experimental or flight-test data are available are being examined. By comparing the theoretical predictions with these data, the strengths and weaknesses of the local surface inclination methods can be ascertained and possible improvements suggested. The second research effort, of significance to control during take-off and landing of most proposed hypersonic vehicle configurations, is aimed at determining the change due to ground effect in control effectiveness of highly swept delta planforms. Central to this research is the development of a vortex-lattice computer program which incorporates an unforced trailing vortex sheet and an image ground plane. With this program, the change in pitching moment of the basic vehicle due to ground proximity, and whether or not there is sufficient control power available to trim, can be determined. In addition to the current work, two different research directions are suggested for future study. The first is aimed at developing an interactive computer program to assist the flight controls engineer in determining the forces and moments generated by different types of control effectors that might be used on hypersonic vehicles. The first phase of this work would deal in the subsonic portion of the flight envelope, while later efforts would explore the supersonic/hypersonic flight regimes. The second proposed research direction would explore methods for determining the aerodynamic trim drag of a generic hypersonic flight vehicle and ways in which it can be minimized through vehicle design and trajectory optimization.

Maughmer, Mark D.↗
NASA NTRS1977

Communication satellite services for special purpose users

The present study identifies potential satellite services, examines the technology necessary for efficient implementation of these services, and determines minimum service cost versus user network size. The generic satellite services evaluated comprise TV and radio distribution (for retransmission), video teleconferencing (interactive), audio/facsimile teleconferencing (interactive), multiplexed data/voice (point-to-point), and satellite-supported land mobile. Satellite costs are based on extrapolations from ongoing commercial satellite programs. Production methods, new technology, and effect of production quantities on present and future production costs are examined to provide information on earth station equipment cost versus the variable 'buy'. Six different launch vehicles from a Delta 2914 to a dedicated Shuttle and three frequency bands and both broadcast (no eclipse capability) and fixed service satellites are considered to assess the effect of satellite size on cost and performance. It is assumed that the user pays only for his prorata share of the space segment costs.

Wright, D. L.↗
NASA NTRS1981

Structural synthesis - Its genesis and development

An historical account is given of the development, from its conception in 1960, of the structural synthesis method. While synthesis techniques lag behind analytical ones in both sophistication and application, the structural design procedures created by combining finite element analysis and mathematical programming algorithms have progressed to the point of maturity. As in the case of finite element analysis, use and acceptance of structural synthesis methodology depends on the development and distribution of easily used and well-documented, production-quality computer programs. Attention is given such elementary applications of synthesis methods as the three-bar truss, an integrally stiffened waffle plate, a stiffened cylindrical shell, aircraft fuselage window panels, the structural efficiency of graphite-epoxy hat-stiffened panels, and an idealized delta wing.

Schmit, L. A.↗
NASA NTRS1993

A survey for rapid variability among early main-sequence A stars

A survey of nonpeculiar early (A0-A5) main-sequence A stars for rapid, low-amplitude variability is presented. The survey is also an independent test of the main-sequence mass-loss theory proposed by Willson et al. (1986). All observations were gathered with the University of Wisconsin Two-Star Photometer. Several period-searching methods are used to analyze time series of differential-photometric data. This instrument coupled with a computerized high-speed data collection system was used with small telescopes at Pine Bluff Observatory and Table Mountain Observatory. Several period-search methods are used to analyze time series of differential-photometric data. This instrument and data-reduction technique allow millimagnitude light variations to be detected. The survey also discovered several low-amplitude Delta Sct stars, all of which are in or blueward of the recognized instability strip.

Schutt, Randy L.↗