Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Novel deformation function creating or destroying any number of even kink solutions

Here, we present a one-parameter family of deformation functions f(Φ) which have novel properties. Firstly, the deformation function is its own inverse. We show that a class of potentials remains invariant under this deformation. Further, when applied to a certain class of kink bearing potentials, one obtains potentials which are not bounded from below. Besides, we show that there is a wide class of potentials having power law kink tails which are connected by this deformation but the corresponding kink tails of the two potentials have different asymptotic behavior. Finally, we show that when this deformation function is applied to an appropriate one-parameter family of potentials having two kink solutions, it creates new potentials with an arbitrary even number (2n) of kink solutions. Conversely, by starting from this potential with 2n kink solutions the deformation function annihilates 2n-2 kinks and we get back the potential which we started with having only two kink solutions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Feeling the Strain: Quantifying Ligand Deformation in Photosynthesis

Structural distortion of protein-bound ligands can play a critical role in enzyme function by tuning the electronic and chemical properties of the ligand molecule. However, quantifying these effects is difficult due to the limited resolution of protein structures and the difficulty of generating accurate structural restrains for non-protein ligands. Here, we seek to quantify these effects through a statistical analysis of ligand distortion in Chlorophyll (Chl) proteins (CP), where ring deformation is thought to play a role in energy and electron transfer. To assess the accuracy of ring-deformation estimates from available structural data, we take advantage of the C 2 symmetry of Photosystem II (PSII), comparing ring-deformation estimates for equivalent sites both within and between 113 distinct X-ray and Cryogenic electron microscopy (CryoEM) PSII structures. Significantly, we find that several deformation modes exhibit considerable variability in predictions, even for equivalent monomers, down to 2 Å resolution, to an extent that probably prevents their utilization in optical calculations. We further find that refinement restrains play a critical role in determining deformation values to resolution as low as 2 Å. However, for those modes that are well-resolved in the structural data, ring deformation in PSII is strongly conserved across all species tested, from cyanobacteria to algae. Furthermore, these results highlight both the opportunities and limitations inherent in the structure-based analysis of the bioenergetic and optical properties of CPs and other protein-ligand complexes.

14 SOLAR ENERGY↗

Comparing Classical and Machine Learning Force Fields for Modeling Deformation of Metal–Organic Frameworks Relevant for Direct Air Capture

Deformation of metal–organic frameworks (MOFs) induced by adsorbate molecules can affect adsorption properties such as capacity and selectivity, but most computational studies of MOFs assume framework rigidity to simplify calculations. Although flexible force fields (FFs) for MOFs have been parametrized for specific materials, the generality of FFs for reliably modeling adsorbate-induced deformation to accuracy nearing that of density functional theory (DFT) has not been established. This work confirms using DFT calculations that adsorbate-induced deformation can affect CO 2 and H 2 O adsorption energies in a considerable fraction of MOFs promising for direct air capture (DAC). We then benchmark the efficacy of several general-purpose FFs in describing adsorbate-induced deformation for DAC against DFT. Our results show that current classical FFs are insufficient for describing MOF deformation, especially in cases of interest for DAC where strong interactions exist between adsorbed molecules and MOF frameworks. Some emerging machine learning force fields (MLFFs) we tested, particularly CHGNet, MACE-MP-0, and Equiformer V2, appear to be more promising than the classical FF for emulating the deformation behavior described by DFT. The best performing FF (CHGNet), however, fails to achieve the accuracy required for practical predictions with a mean absolute adsorption energy error of 0.124 eV.

adsorption↗

Sea Ice Rheology Experiment (SIREx): 1. Scaling and Statistical Properties of Sea-Ice Deformation Fields

As the sea-ice modeling community is shifting to advanced numerical frameworks, developing new sea-ice rheologies, and increasing model spatial resolution, ubiquitous deformation features in the Arctic sea ice are now being resolved by sea-ice models. Initiated at the Forum for Arctic Modeling and Observational Synthesis, the Sea Ice Rheology Experiment (SIREx) aims at evaluating state-of-the-art sea-ice models using existing and new metrics to understand how the simulated deformation fields are affected by different representations of sea-ice physics (rheology) and by model configuration. Part 1 of the SIREx analysis is concerned with evaluation of the statistical distribution and scaling properties of sea-ice deformation fields from 35 different simulations against those from the RADARSAT Geophysical Processor System (RGPS). For the first time, the viscous-plastic (and the elastic-viscous-plastic variant), elastic-anisotropic-plastic, and Maxwell-elasto-brittle rheologies are compared in a single study. We find that both plastic and brittle sea-ice rheologies have the potential to reproduce the observed RGPS deformation statistics, including multi-fractality. Model configuration (e.g., numerical convergence, atmospheric representation, spatial resolution) and physical parameterizations (e.g., ice strength parameters and ice thickness distribution) both have effects as important as the choice of sea-ice rheology on the deformation statistics. It is therefore not straightforward to attribute model performance to a specific rheological framework using current deformation metrics. In light of these results, we further evaluate the statistical properties of simulated Linear Kinematic Features in a SIREx Part 2 companion paper.

54 ENVIRONMENTAL SCIENCES↗

Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy

Abstract Extreme shear deformation is used for several material processing methods and is unavoidable in many engineering applications in which two surfaces are in relative motion against each other while in physical contact. The mechanistic understanding of the microstructural evolution of multi-phase metallic alloys under extreme shear deformation is still in its infancy. Here, we highlight the influence of shear deformation on the microstructural hierarchy and mechanical properties of a binary as-cast Al-4 at.% Si alloy. Shear-deformation-induced grain refinement, multiscale fragmentation of the eutectic Si-lamellae, and metastable solute saturated phases with distinctive defect structures led to a two-fold increase in the flow stresses determined by micropillar compression testing. These results highlight that shear deformation can achieve non-equilibrium microstructures with enhanced mechanical properties in Al–Si alloys. The experimental and computational insights obtained here are especially crucial for developing predictive models for microstructural evolution of metals under extreme shear deformation.

36 MATERIALS SCIENCE↗

Deformations of Geometric Structures in Topological Sigma Models

We study a Lie algebra of formal vector fields W{sub n} with it application to the perturbative deformed holomorphic symplectic structure in the A-model, and a Calabi-Yau manifold with boundaries in the B-model. We show that equivalent classes of deformations are described by a Hochschild cohomology of the DG-algebra A = (A,Q), Q = {partial_derivative}-bar+{partial_derivative}{sub deform,} which is defined to be the cohomology of (-1){sup n}Q+d{sub Hoch}. Here {partial_derivative}-bar is the initial non-deformed BRST operator while {partial_derivative}{sub deform} is the deformed part whose algebra is a Lie algebra of linear vector fields gl{sub n}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tip-induced deformation of a phospholipid bilayer: Theoretical perspective of sum frequency generation imaging

The paper addresses theory of Sum Frequency Generation imaging of an atomic force microscopy tip-induced deformation of a bilayer phospholipid membrane deposited over a pore: known as a nano-drum system. Image modeling employed nonlinearities of the normal modes specific to hydrocarbon terminal methyls, which are distributed about the deformed surfaces of inner and outer leaflets. The deformed profiles are according to the solutions of shape equation for Canham-Helfrich Hamiltonian accounting properties of four membranes, which differ in elasticity and adhesion. The results indicate that in continuous deformed surfaces, the difference in the curvature of the outer and inner leaflets dominates in the imaged nonlinearity. This is different comparing to the results for a perfect bilayer spherical cap system (the subject of previous study), where nonlinear image response is dominated by the mismatch of the inner and outer leaflets’ surface areas (as projected to the image plane) at the edge of perfectly spherical structure. The results of theoretical studies, here, demonstrate that Sum Frequency Generation imaging in continuous and deformed bilayer surfaces are helpful to address curvature locally and anticipate mechanical properties of membrane. The articles discuss applicability and practical limitations of the approach. Combination of Atomic Force Microscopy and Sum Frequency Generation imaging under controlled tip-induced deformation provides a good opportunity to probe and test membranes physical properties with rigor of adopted theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preliminary deformation model for National Seismic Hazard map of Indonesia

Preliminary deformation model for the Indonesia’s National Seismic Hazard (NSH) map is constructed as the block rotation and strain accumulation function at the elastic half-space. Deformation due to rigid body motion is estimated by rotating six tectonic blocks in Indonesia. The interseismic deformation due to subduction is estimated by assuming coupling on subduction interface while deformation at active fault is calculated by assuming each of the fault‘s segment slips beneath a locking depth or in combination with creeping in a shallower part. This research shows that rigid body motion dominates the deformation pattern with magnitude more than 15 mm/year, except in the narrow area near subduction zones and active faults where significant deformation reach to 25 mm/year.

42 ENGINEERING↗

The mechanical properties of austenite stainless steel 304 after structural deformation through cold work

The 304 stainless steel (SS) type is widely used in oil and gas operations due to its excellent corrosion resistance. However, the presence of the fine sand particles and H{sub 2}S gas contained in crude oil could lead the erosion and abrasion in steel. In this study, cold rolled treatments were conducted to the 304 SS in order to increase the wear resistance of the steel. The cold work has resulted in thickness reduction to 20%, 40% and 60% of the original. Various microstructural characterizations were used to analyze the effect of deformation. The hardness characterization showed that the initial hardness value increased from 145 HVC to 395 HVC as the level of deformation increase. Further, the wear resistance increased with the deformation rate from 0% to 40% and subsequently decreased from 40% to 60% deformation rate. Microstructural characterization shows that the boundary change to coincide by 56 µm, 49 µm, 45 µm, and 43 µm width and the grain go to flatten and being folded like needles. The effect of deformation on the grain morphology and structure was also studied by optical metallography and X-Ray Diffraction. It is shown that the deformation by means of a cold rolled process has transformed the austenite structure into martensitic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Creep deformation mechanism mapping in nickel base disk superalloys

We investigated the creep deformation mechanisms at intermediate temperature in ME3, a modern Ni-based disk superalloy, using diffraction contrast imaging. Both conventional transmission electron microscopy (TEM) and scanning TEM were utilised. Distinctly different deformation mechanisms become operative during creep at temperatures between 677-815 °C and at stresses ranging from 274 to 724 MPa. Both polycrystalline and single-crystal creep tests were conducted. The single-crystal tests provide new insight into grain orientation effects on creep response and deformation mechanisms. Creep at lower temperatures (≤760 °C) resulted in the thermally activated shearing modes such as microtwinning, stacking fault ribbons and isolated superlattice extrinsic stacking faults. In contrast, these faulting modes occurred much less frequently during creep at 815 °C under lower applied stresses. Instead, the principal deformation mode was dislocation climb bypass. In addition to the difference in creep behaviour and creep deformation mechanisms as a function of stress and temperature, it was also observed that microstructural evolution occurs during creep at 760 °C and above, where the secondary coarsened and the tertiary precipitates dissolved. Based on this work, a creep deformation mechanism map is proposed, emphasising the influence of stress and temperature on the underlying creep mechanisms.

36 MATERIALS SCIENCE↗

Composite system in deformed space with minimal length

For composite systems made of N different particles living in a space characterized by the same deformed Heisenberg algebra, but with different deformation parameters, we define the total momentum and the center-of-mass position to first order in the deformation parameters. Such operators satisfy the deformed algebra with effective deformation parameters. As a consequence, a two-particle system can be reduced to a one-particle problem for the internal motion. As an example, the correction to the hydrogen atom nS energy levels is re-evaluated. Comparison with high-precision experimental data leads to an upper bound of the minimal length for the electron equal to 3.3x10{sup -18} m. The effective Hamiltonian describing the center-of-mass motion of a macroscopic body in an external potential is also found. For such a motion, the effective deformation parameter is substantially reduced due to a factor 1/N{sup 2}. This explains the strangely small result previously obtained for the minimal length from a comparison with the observed precession of the perihelion of Mercury. From our study, an upper bound of the minimal length for quarks equal to 2.4x10{sup -17} m is deduced, which appears close to that obtained for electrons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strength and deformation of shocked diamond single crystals: Orientation dependence

Understanding and quantifying the strength or elastic limit of diamond single crystals is of considerable scientific and technological importance, and has been a subject of long standing theoretical and experimental interest. To examine the effect of crystalline anisotropy on strength and deformation of shocked diamond single crystals, plate impact experiments were conducted to measure wave profiles at various elastic impact stresses up to ~120 GPa along [110] and [111] crystal orientations. Using laser interferometry, particle velocity histories and shock velocities in the diamond samples were measured and were compared with similar measurements published previously for shock compression along the [100] direction. Wave profiles for all three orientations showed large elastic wave amplitudes followed by time-dependent inelastic deformation. From the measured wave profiles, the elastic limits were determined under well characterized uniaxial strain loading conditions. The measured elastic wave amplitudes for the [110] and [111] orientations were lower for higher elastic impact stress (stress attained for an elastic diamond response), consistent with the result reported previously for [100] diamond. The maximum resolved shear stress (MRSS) on the {111}<110> slip systems was determined for each orientation, revealing significant orientation dependence. The MRSS values for the [100] and [110] orientations (~33 GPa) are 25-30% of theoretical estimates; the MRSS value for the [111] orientation is significantly lower (~23 GPa). Our results demonstrate that the MRSS depends strongly on the stress component normal to the {111} planes or the resolved normal stress (RNS), suggesting that the RNS plays a key role in inhibiting the onset of inelastic deformation. Lower elastic wave amplitudes at higher peak stress and the effect of the RNS are inconsistent with typical dislocation slip mechanisms of inelastic deformation, suggesting instead an inelastic response characteristic of shocked brittle solids. The present results show that the elastic limit (or material strength) of diamond single crystals cannot be described using traditional isotropic approaches, and typical plasticity models cannot be used to describe the inelastic deformation of diamond. Analysis of the measured wave profiles beyond the elastic limit, including characterization of the peak state, requires numerical simulations that incorporate a time-dependent, anisotropic, inelastic deformation response. Development of such a material description for diamond is an important need.

36 MATERIALS SCIENCE↗

Cluster radioactivity with effects of deformations and orientations of nuclei included

Based on the preformed cluster model (PCM) of Gupta and collaborators, we have extended our recent study on ground-state cluster decays to parent nuclei resulting in daughters other than spherical {sup 208}Pb, i.e., to deformed daughters, and the very new cases of {sup 14}C and {sup 15}N decays of {sup 223}Ac, and {sup 34}Si decay of {sup 238}U, taking nuclei as spherical, quadrupole deformed ({beta}{sub 2}) alone, and with higher multipole deformations up to hexadecapole ({beta}{sub 2}, {beta}{sub 3}, {beta}{sub 4}) together with the 'optimum' orientations of cold decay process. Except for {sup 14}C decays of {sup 221}Fr, {sup 221-224,226}Ra, and {sup 225}Ac where higher multipole deformations up to {beta}{sub 4} are found essential, the quadrupole deformation {beta}{sub 2} alone is found good enough to fit the experimental data. Because the PCM treats the cluster-decay process as the tunneling of a preformed cluster, the deformations and orientations of nuclei modify both the preformation probability P{sub 0} and tunneling probability P, and hence the decay half-life, considerably.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Kappa Snyder deformations of Minkowski spacetime, realizations, and Hopf algebra

We present Lie-algebraic deformations of Minkowski space with undeformed Poincare algebra. These deformations interpolate between Snyder and {kappa}-Minkowski space. We find realizations of noncommutative coordinates in terms of commutative coordinates and derivatives. By introducing modules, it is shown that, although deformed and undeformed structures are not isomorphic at the level of vector spaces, they are isomorphic at the level of Hopf-algebraic action on corresponding modules. Invariants and tensors with respect to Lorentz algebra are discussed. A general mapping from {kappa}-deformed Snyder to Snyder space is constructed. The deformed Leibniz rule, the Hopf structure, and the star product are found. Special cases, particularly Snyder and {kappa}-Minkowski in Maggiore-type realizations, are discussed. The same generalized Hopf-algebraic structures are considered as well in the case of an arbitrary allowable kind of realization, and results are given perturbatively up to second order in deformation parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rietveld Analysis of X-ray Powder Diffraction Patterns as a Potential Tool for the Identification of Impact-deformed Carbonate Rocks

Previous X-ray powder diffraction (XRD) studies revealed that shock deformed carbonates and quartz have broader XRD patterns than those of unshocked samples. Entire XRD patterns, single peak profiles and Rietveld refined parameters of carbonate samples from the Sierra Madera impact crater, west Texas, unshocked equivalent samples from 95 miles north of the crater and the Mission Canyon Formation of southwest Montana and western Wyoming were used to evaluate the use of X-ray powder diffraction as a potential tool for distinguishing impact deformed rocks from unshocked and tectonically deformed rocks. At Sierra Madera dolostone and limestone samples were collected from the crater rim (lower shock intensity) and the central uplift (higher shock intensity). Unshocked equivalent dolostone samples were collected from well cores drilled outside of the impact crater. Carbonate rocks of the Mission Canyon Formation were sampled along a transect across the tectonic front of the Sevier and Laramide orogenic belts. Whereas calcite subjected to significant shock intensities at the Sierra Madera impact crater can be differentiated from tectonically deformed calcite from the Mission Canyon Formation using Rietveld refined peak profiles, weakly shocked calcite from the crater rim appears to be indistinguishable from the tectonically deformed calcite. In contrast, Rietveld analysis readily distinguishes shocked Sierra Madera dolomite from unshocked equivalent dolostone samples from outside the crater and tectonically deformed Mission Canyon Formation dolomite.

58 GEOSCIENCES↗

Objective assessment of deformable image registration in radiotherapy: A multi-institution study

The looming potential of deformable alignment tools to play an integral role in adaptive radiotherapy suggests a need for objective assessment of these complex algorithms. Previous studies in this area are based on the ability of alignment to reproduce analytically generated deformations applied to sample image data, or use of contours or bifurcations as ground truth for evaluation of alignment accuracy. In this study, a deformable phantom was embedded with 48 small plastic markers, placed in regions varying from high contrast to roughly uniform regional intensity, and small to large regional discontinuities in movement. CT volumes of this phantom were acquired at different deformation states. After manual localization of marker coordinates, images were edited to remove the markers. The resulting image volumes were sent to five collaborating institutions, each of which has developed previously published deformable alignment tools routinely in use. Alignments were done, and applied to the list of reference coordinates at the inhale state. The transformed coordinates were compared to the actual marker locations at exhale. A total of eight alignment techniques were tested from the six institutions. All algorithms performed generally well, as compared to previous publications. Average errors in predicted location ranged from 1.5 to 3.9 mm, depending on technique. No algorithm was uniformly accurate across all regions of the phantom, with maximum errors ranging from 5.1 to 15.4 mm. Larger errors were seen in regions near significant shape changes, as well as areas with uniform contrast but large local motion discontinuity. Although reasonable accuracy was achieved overall, the variation of error in different regions suggests caution in globally accepting the results from deformable alignment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Automated registration of large deformations for adaptive radiation therapy of prostate cancer

Available deformable registration methods are often inaccurate over large organ variation encountered, for example, in the rectum and bladder. The authors developed a novel approach to accurately and effectively register large deformations in the prostate region for adaptive radiation therapy. A software tool combining a fast symmetric demons algorithm and the use of masks was developed in C++ based on ITK libraries to register CT images acquired at planning and before treatment fractions. The deformation field determined was subsequently used to deform the delivered dose to match the anatomy of the planning CT. The large deformations involved required that the bladder and rectum volume be masked with uniform intensities of -1000 and 1000 HU, respectively, in both the planning and treatment CTs. The tool was tested for five prostate IGRT patients. The average rectum planning to treatment contour overlap improved from 67% to 93%, the lowest initial overlap is 43%. The average bladder overlap improved from 83% to 98%, with a lowest initial overlap of 60%. Registration regions were set to include a volume receiving 4% of the maximum dose. The average region was 320x210x63, taking approximately 9 min to register on a dual 2.8 GHz Linux system. The prostate and seminal vesicles were correctly placed even though they are not masked. The accumulated doses for multiple fractions with large deformation were computed and verified. The tool developed can effectively supply the previously delivered dose for adaptive planning to correct for interfractional changes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

SU-E-J-42: Customized Deformable Image Registration Using Open-Source Software SlicerRT

Purpose: SlicerRT is a flexible platform that allows the user to incorporate the necessary images registration and processing tools to improve clinical workflow. This work validates the accuracy and the versatility of the deformable image registration algorithm of the free open-source software SlicerRT using a deformable physical pelvic phantom versus available commercial image fusion algorithms. Methods: Optical camera images of nonradiopaque markers implanted in an anatomical pelvic phantom were used to measure the ground-truth deformation and evaluate the theoretical deformations for several DIR algorithms. To perform the registration, full and empty bladder computed tomography (CT) images of the phantom were obtained and used as fixed and moving images, respectively. The DIR module, found in SlicerRT, used a B-spline deformable image registration with multiple optimization parameters that allowed customization of the registration including a regularization term that controlled the amount of local voxel displacement. The virtual deformation field at the center of the phantom was obtained and compared to the experimental ground-truth values. The parameters of SlicerRT were then varied to improve spatial accuracy. To quantify image similarity, the mean absolute difference (MAD) parameter using Hounsfield units was calculated. In addition, the Dice coefficient of the contoured rectum was evaluated to validate the strength of the algorithm to transfer anatomical contours. Results: Overall, SlicerRT achieved one of the lowest MAD values across the algorithm spectrum, but slightly smaller mean spatial errors in comparison to MIM software (MIM). On the other hand, SlicerRT created higher mean spatial errors than Velocity Medical Solutions (VEL), although obtaining an improvement on the DICE to 0.91. The large spatial errors were attributed to the poor contrast in the prostate bladder interface of the phantom. Conclusion: Based phantom validation, SlicerRT is capable of achieving comparable DIR accuracy to commercial programs such as MIM and VEL.

60 APPLIED LIFE SCIENCES↗