SEARCH · Engineering Papers

Results for “data transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS1992

A study of the influence of the data acquisition system sampling rate on the accuracy of measured acceleration loads for transport aircraft

A research effort was initiated at National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC), to describe the relationship between the sampling rate and the accuracy of acceleration loads obtained from the data acquisition system of a transport aircraft. An accelerometer was sampled and digitized at a rate of 100 samples per second onboard a NASA Boeing 737 (B-737) flight research aircraft. Numerical techniques were used to reconstruct 2.5 hours of flight data into its original input waveform and then re-sample the waveform into rates of 4, 8, 16, and 32 samples per second. Peak-between-means counting technique and power spectral analysis were used to evaluate each sampling rate using the 32 samples per second data as the comparison. This paper presents the results from these methods and includes in appendix A, the peak-between-means counting results used in a general fatigue analysis for each of the sampling rates.

Whitehead, Julia H.↗

NASA NTRS1987

Origin and transport of high energy particles in the galaxy

The origin, confinement, and transport of cosmic ray nuclei in the galaxy was studied. The work involves interpretations of the existing cosmic ray physics database derived from both balloon and satellite measurements, combined with an effort directed towards defining the next generation of instruments for the study of cosmic radiation. The shape and the energy dependence of the cosmic ray pathlength distribution in the galaxy was studied, demonstrating that the leaky box model is not a good representation of the detailed particle transport over the energy range covered by the database. Alternative confinement methods were investigated, analyzing the confinement lifetime in these models based upon the available data for radioactive secondary isotopes. The source abundances of several isotopes were studied using compiled nuclear physics data and the detailed transport calculations. The effects of distributed particle acceleration on the secondary to primary ratios were investigated.

Wefel, John P.↗

NASA NTRS1989

Optical archiving for scientific data

Write-once-read-many (WORM) optical disk technology is now practical for use as (1) a near online storage media, (2) long-term storage in a passive repository, and (3) under some circumstances, transporting from and to data generators and data users at remote sites. Optical technology provides several significant advantages over magnetic tapes as a data storage media because it is more compact, provides random access, has a longer lifetime, at least 30 years, and is less sensitive to environmental factors such as temperature and humidity. Two major archival projects using optical technology underway are discussed: the Coastal Zone Color Scanner data and the Dynamics Explorer data. Both projects have used the software for optical archive and retrieval (SOAR) to transfer data in a volume format that can be read transparently by VAX/VMS. Through the use of this software technique, (1) data generators and data users do not have to rewrite extant software and (2) the VAX/VMS Files-11 volume format is in wide use, so it can serve as an interim standard and will be accessible in the long-term.

Lowrey, Barbara E.↗

NASA NTRS1993

Thermodynamic balance of three-dimensional stratospheric winds derived from a data assimilation procedure

The NASA/Goddard three-dimensional chemistry and transport model is driven by winds from a stratospheric data assimilation system. Synoptic- and planetary-scale patterns, apparent in satellite observations of trace constituents, are successfully reproduced for seasonal integrations. As model integrations proceed, however, the quality of simulations decreases, and systematic differences between calculation and measurement appear. The differences are explained by examining the zonal-mean residual circulation. The vertical velocity w-bar (sup star) is calculated two ways: (1) from the diabatic heating rates and temperature tendency and (2) from the Eulerian vertical velocity and the horizontal eddy heat flux convergence. The results from these calculations differ substantially. Periodic insertion of observational data during the assimilation process continually shocks the general circulation model and produces these differences, which leads to an overestimate of the mean vertical heat and cconstituent transport. Such differences are expected to be general to all data assimilation products. This interpretation is corroborated by two-dimensional (2D) model calculations. When w-bar(sup star) is calculated from (2), the 2D ozone evolution is unrealistic and qualitatively similar to the 3D model simulation. The 2D ozone evolution is reasonable when w-bar (sup star) from (1).

Weaver, Clark J.↗

NASA NTRS1991

Development of the Single Graded Groove high-performance heat pipe

This paper describes the development of a new nonarterial heat pipe with a nominal transport capability of 100,000 W in. Data are presented for one-g transport capability as a function of tilt and working fluid quantity. The transport capability agrees well with theoretical predictions. The LMSC Graded Groove Heat Pipe exhibits the high throughput and excellent heat transfer characteristics of earlier arterial designs such as the LMSC Tapered Artery Heat Pipe. At the same time, it suffers none of the priming difficulties associated with the arterial designs.

Ambrose, J. H.↗

NASA NTRS2006

Thermal Dispersion Within a Porous Medium Near a Solid Wall

The regenerator is a key component to Stirling cycle machine efficiency. Typical regenerators are of sintered fine wires or layers of fine-wire screens. Such porous materials are contained within solid-waH casings. Thermal energy exchange between the regenerator and the casing is important to cycle performance for the matrix and casing would not have the same axial temperature profile in an actual machine. Exchange from one to the other may allow shunting of thermal energy, reducing cycle efficiency. In this paper, temperature profiles within the near-wall region of the matrix are measured and thermal energy transport, termed thermal dispersion, is inferred. The data show how the wall affects thermal transport. Transport normal to the mean flow direction is by conduction within the solid and fluid and by advective transport within the matrix. In the near-wall region, both may be interrupted from their normal in-core pattern. Solid conduction paths are broken and scales of advective transport are damped. An equation is presented which describes this change for a wire screen mesh. The near-wall layer typically acts as an insulating layer. This should be considered in design or analysis. Effective thermal conductivity within the core is uniform. In-core transverse thermal effective conductivity values are compared to direct and indirect measurements reported elsewhere and to 3D numerical simulation results, computed previously and reported elsewhere. The 3-D CFD model is composed of six cylinders in cross flow, staggered in arrangement to match the dimensions and porosity of the matrix used in the experiments. The commercial code FLUENT is used to obtain the flow and thermal fields. The thermal dispersion and effective thermal conductivities for the matrix are computed from the results.

Simon, T.↗

NASA NTRS1975

Review of measured vibration and noise environments experienced by passengers in aircraft and in ground transportation systems

Measured vibration and interior noise data are presented for a number of air and surface vehicles. Consideration is given to the importance of direction effects; of vehicle operations such as take-off, cruise, and landing; and of measurement location on the level and frequency of the measurements. Various physical measurement units or descriptors are used to quantify and compare the data. Results suggest the range of vibration and noise associated with a particular mode of transportation and illustrate the comparative levels in terms of each of the descriptors. Collectively, the results form a data base which may be useful in assessing the ride of existing or future systems relative to vehicles in current operation.

Stephens, D. G.↗

NASA NTRS1981

Mass and Momentum Turbulent Transport Experiments with Confined Coaxial Jets

Downstream mixing of coaxial jets discharging in an expanded duct was studied to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the propulsion community for combustor flow modeling. Flow visualization studies showed four major shear regions occurring; a wake region immediately downstream of the inlet jet inlet duct; a shear region further downstream between the inner and annular jets; a recirculation zone; and a reattachment zone. A combination of turbulent momentum transport rate and two velocity component data were obtained from simultaneous measurements with a two color laser velocimeter (LV) system. Axial, radial and azimuthal velocities and turbulent momentum transport rate measurements in the r-z and r-theta planes were used to determine the mean value, second central moment (or rms fluctuation from mean), skewness and kurtosis for each data set probability density function (p.d.f.). A combination of turbulent mass transport rate, concentration and velocity data were obtained system. Velocity and mass transport in all three directions as well as concentration distributions were used to obtain the mean, second central moments, skewness and kurtosis for each p.d.f. These LV/LIF measurements also exposed the existence of a large region of countergradient turbulent axial mass transport in the region where the annular jet fluid was accelerating the inner jet fluid.

Johnson, B. V.↗

NASA NTRS1985

Transport processes as manifested in satellite and lidar aerosol measurements

A large increase in stratospheric aerosol data has become available recently from the SAM II and SAGE satellite sensors and the impetus from increased volcanic perturbations. Six years of SAM II and nearly 3 years of SAGE measurements have been accumulated. The increase in large volcanic eruptions since 1979 has caused an acceleration of new data sets from worldwide lidars and airborne lidar campaigns and from various airborne in situ measurements. The SAM II and SAGE data sets show the tropical stratosphere as a source for background stratospheric aerosols, and midlatitudes as a possible sink. Analyses of SAM II data show that the aerosol within the northern wintertime polar vortex becomes isolated from the outside. Subsidence occurs within the vortex, changing the vertical aerosol distribution over the winter period. SAM II and SAGE data show that the aerosol is transported in the stratosphere from low to high latitudes in wintertime. Entry regions of tropospheric air in the Tropics are also evident in the SAGE data as shown by stratospheric cirrus clouds being formed well above the local tropopause. Nature has provided over the past 5 years a number of large volcanic eruptions which spewed tons of new aerosol into the stratosphere. These eruptions have occurred at various latitudes which allow transport differences to be studied. Satellite and lidar aerosol data will be used to describe the stratospheric motions of aerosols produced after these violet volcanic eruptions.

Mccormick, M. P.↗

NASA NTRSDate not supplied

ICARTT File Format Enhancements: Supporting FAIRness of Airborne and Field Campaign Data

The ICARTT (International Consortium for Atmospheric Research on Transport and Transformation) standards were developed to fulfill data management needs for the ICARTT campaign in 2004. The ICARTT file format is text-based and composed of a header with important data description information and the data section. The ICARTT format, built on the NASA Ames and GTE data formats, was created to facilitate data exchange and promote collaborations among the science teams for achieving the ICARTT campaign goals. Due to the success of the ICARTT campaign, the ICARTT file format was exposed to a broad range of airborne researchers and was adopted for use in many other field campaigns sponsored by NASA and other partner agencies. The ICARTT format standards became a NASA standard in 2010 and was amended in January 2017 providing many enhancements, including the requirement for variable standard names. Primarily designed for airborne field studies, ICARTT has been further utilized for ground-based studies. The ICARTT format can host metadata that is critical for proper use of the data, especially for in-situ measurements. However, the information that needs to be included is often in free text, meaning the information are human readable, but not machine interpretable. Furthermore, the amount and type of information provided can vary substantially between principal investigators and campaigns. To support interoperability and FAIR principles, further enhancements to the ICARTT standards are recommended. Possible recommendations include standardizing timestamps for easier data comparisons and analysis; potential use of controlled and consistent vocabulary for variable short name and certain common metadata elements; and providing guidance on variable measurement units and how they are reported.

Megan Buzanowicz↗

NASA NTRS1997

AXAF Detector Backgrounds Produced By Cosmic Ray Protons

One of the science instruments on the Advanced X-ray Astrophysics Facility (AXAF), planned for launch in 1998 into a highly elliptical (10,000 km x 140,000 km) orbit, is a microchannel plate High Resolution Camera (HRC). This detector is designed to provide imaging and spectroscopic observations of x-rays emitted by stellar sources in the 0.1 to 10 keV energy range. Described here are analyses made to determine the expected time-dependent detector background from prompt and delayed (activation) radiation initiated by galactic cosmic-ray (GCR) proton interactions in the spacecraft and payload. Numerical simulations were made using the coupled set of Monte Carlo radiation transport codes, analysis software, and data bases shown. The major codes are HETC for nucleon-meson transport, EGS for simulating electromagnetic cascades, and MORSE for low-energy (less than 15 MeV) neutron transport. The simulation follows the transport history of photons in the energy range from - 100 GeV down to approx. 0.1 keV due to gamma-ray sources from neutral pion decay, high-energy (spallation) collisions, and low-energy neutron inelastic scattering and capture reactions. Also included is radioisotope production and the tracking of gamma-rays, electrons, and positrons from induced radioactivity.

Armstrong, T. W.↗

NASA NTRS2000

The S2 VLBI Systems: DAS, RT/PT and Correlator

The S2 VLBI system synthesizes wide IF bandwidths by rapidly switching the local oscillator (LO) frequency in a small (1-4) number of baseband converters (BBC's). Data are recorded on video cassettes using an array of 8 VHS transports. Characteristics of the S2 Data Acquisition System (DAS), the S2 Record and Playback Terminals (RT and PT) and the S2 Correlator are summarized. The bandwidth synthesis (BWS) frequency switching sequence used in a series of system validation experiments is presented.

Petrachenko, William T.↗

NASA NTRS1983

Plume base flow simulation technology

A combined analytical/empirical approach was studied in an effort to define the plume simulation parameters for base flow. For design purposes, rocket exhaust simulation (i.e., plume simulation) is determined by wind tunnel testing. Cold gas testing was concluded to be a cost and schedule effective data base of substantial scope. The results fell short of the target, although work conducted was conclusive and advanced the state of the art. Comparisons of wind tunnel predictions with Space Transportation System (STS) flight data showed considerable differences. However, a review of the technology program data base has yielded an additional parameter that may correlate flight and cold gas test data. Data from the plume technology program and the NASA test flights are presented to substantiate the proposed simulation parameters.

Roberts, B. B.↗

NASA NTRSDate not supplied

Refined Predictions Compared with the Propulsion Airframe Aeroacoustics and Aircraft System Noise Flight Research Test Data

In a collaboration between NASA and The Boeing Company, the Propulsion Airframe Aeroacoustics and Aircraft System Noise Flight Research Test was executed by the Boeing ecoDemonstrator Program in 2020 with an Etihad Airways Boeing 787-10 aircraft. This ambitious flight research successfully accomplished many objectives and constitutes the most comprehensive and highest quality acoustic flight data available to NASA for a modern commercial subsonic transport aircraft. One purpose of these data is to be the measure of accuracy for the aircraft system noise prediction capabilities of NASA. This research reviews the impact of the major improvements in prediction methods implemented up to this point and tested in the Research version of the NASA Aircraft Noise Prediction Program. The improvements have been to the prediction of jet source and jet-flap interaction, to both fan broadband and tone source prediction, and to the prediction of propulsion airframe aeroacoustic scattering effects. In general, over the engine power range, comparisons between prediction and flight data are within 2 EPNdB including for the intentional sideline-to-sideline asymmetries as implemented in the flight test by flying the aircraft with only one engine at power. Considerable progress has been shown here in the continuing effort to advance the fidelity of NASA aircraft noise prediction capabilities for subsonic aircraft flight acoustics, modern transport aircraft and future aircraft concepts.

aircraft system noise prediction↗

NASA NTRS1986

Shuttle/spacelab contamination environment and effects handbook

This handbook is intended to assist users of the Spacelab/Space Transportation System by providing contamination environments and effects information that may be of value in planning, designing, manufacturing, and operating a space flight experiment. A summary of available molecular and particulate contamination data on the Space Transportation System and its facilities is presented. Contamination models, contamination effects, and protection methods information are also presented. In addition to contamination, the effects of the space environments at STS altitudes on spacecraft materials are included. Extensive references, bibliographies, and contacts are provided.

Bareiss, L. E.↗

NASA NTRSDate not supplied

Data Science and Urban Air Mobility: Challenges and Opportunities

Aviation is broadly a combination of aircraft, airspace and airports. The data science life cycle comprises of five steps - capture, maintain, process, analyze and communicate. The presentation introduces the legacy of conventional aviation research in the context of the data science life cycle to motivate the challenges with Urban Air Mobility, a field that is quite nascent. A summary of recent research will be presented to highlight the innovative ways to address the challenges. Examples provided will include the generation of synthetic data, encounter models from simulations, and leveraging novel and diverse data sets from traditional transportation and non-aviation sources, to analyze problems of operation in urban airspace. Finally, opportunities will be identified for further exploration, niche development and filling the gaps in the field of data science for UAM.

Urban Air Mobility↗

NASA NTRS2020

Data Science and Urban Air Mobility: Challenges and Opportunities

Urban Air Mobility↗

NASA NTRSDate not supplied

Data Science Challenges for Urban Air Mobility

Aviation is a combination of aircraft, airspace and airports. The data science life cycle comprises of five steps - capture, maintain, process, analyze and communicate. The presentation introduces the legacy of conventional aviation research in the context of the data science life cycle to motivate the challenges with Urban Air Mobility, a field that is quite nascent. A summary of recent research will be presented to highlight the innovative ways to address the challenges. Examples provided will include the generation of synthetic data, encounter models from simulations, and leveraging novel and diverse data sets from traditional transportation and non-aviation sources, to analyze problems of operation in urban airspace. Finally, opportunities will be identified for further exploration, niche development and filling the gaps in the field of data science for UAM.

Data Science↗