Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “damping controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

A ground-simulator investigation of helicopter longitudinal flying qualities for instrument approach

A ground-simulation experiment was conducted to investigate the direct and interactive influences of several longitudinal static and dynamic stability parameters on helicopter flying qualities during terminal-area operations in instrument conditions. Variations that were examined included five levels of static control-position gradients ranging from stable to unstable; two levels of dynamic stability for the long-period oscillation; two levels of the steady-state pitch speed gradient; two levels of angle-of-attack stability and pitch-rate damping; and two levels of stability and control augmentation. These variations were examined initially in calm air and thin in simulated light-to-moderate turbulence and wind shear. Five pilots performed a total of 223 evaluations of these parameters for a representative microwave landing system precision approach task conducted in a dual-pilot crew-loading situation.

Lebacqz, J. V.↗
NASA NTRS1978

Mod-1 Wind Turbine Generator Analysis

A general summary of the MOD-1 wind turbine generator control system and simulation is presented. Mechanical and speed stabilization control means to add drive train damping were mentioned and MOD-1 simulation results showing the effects of speed stabilization are displayed.

Barton, R. S.↗
NASA NTRS1985

Dynamic performance of several large antenna concepts

Four antenna concepts the box truss, tetrahedral truss, wrap-radial rib, and hoop and column antenna were examined for the dynamic performance when subjected to an operational environment. Space applications for the concepts are numerous; however, the land mobile satellite system (LMSS) was chosen as a baseline study and its operational constraints are applied to each concept. The dynamic response of each concept is examined for structural displacement and structural damping effects. The necessity of a control system for vibrational displacement reduction is examined along with a comparison of the relative merits of each antenna concept.

Andersen, G. C.↗
NASA NTRS1985

Comparative analysis of on-orbit dynamic performance of several large antenna concepts

A comparative analysis of the on-orbit dynamic performance of four large anetanna concepts is presented. Among the antenna concepts evaluated are: the box truss; tetrahedral truss; warp-radial rib; and the hoop and column antenna designs. The characteristics and magnitudes of the antennas' dynamic response were evaluated in terms of structural displacements and member loads incurred during various slew-rate maneuvers. The results of the dynamic response analysis are compared to the design requirements of the Land Mobile Satellite System (LMSS) with respect to surface accuracy, decenter, defocus, and angular rocking. Comments are made on the effectiveness of structural damping and the application of active controls for vibrational response reduction. Schematic illustrations of the antenna design concepts are provided.

Andersen, G. C.↗
NASA NTRS1987

Proceedings of the 3rd Annual SCOLE Workshop

Topics addressed include: modeling and controlling the Spacecraft Control Laboratory Experiment (SCOLE) configurations; slewing maneuvers; mathematical models; vibration damping; gravitational effects; structural dynamics; finite element method; distributed parameter system; on-line pulse control; stability augmentation; and stochastic processes.

Taylor, Lawrence W., Jr.↗
NASA NTRS1987

Performance of an electromagnetic bearing for the vibration control of a supercritical shaft

The flexural vibrations of a rotating shaft, running through one or more critical speeds, can be reduced to an acceptably low level by applying suitable control forces at an intermediate span position. If electromagnets are used to produce the control forces then it is possible to implement a wide variety of control strategies. A test rig is described which includes a microprocessor-based controller, in which such strategies can be realised in terms of software-based algorithms. The electromagnet configuration and the method of stabilising the electromagnet force-gap characteristic are discussed. The bounds on the performance of the system are defined. A simple control algorithm is outlined, where the control forces are proportional to the measured displacement and velocity at a single point on the shaft span; in this case the electromagnet behaves in a similar manner to that of a parallel combination of a linear spring and damper. Experimental and predicted performance of the system are compared, for this type of control, where various programmable rates of damping are applied.

Bradfield, C. D.↗
NASA NTRS1985

Design and testing of a coaxial linear magnetic spring with integral linear motor

The design of a coaxial linear magnetic spring which incorporates a linear motor to control axial motion and overcome system damping is presented, and the results of static and dynamic tests are reported. The system has nominal stiffness 25,000 N/m and is designed to oscillate a 900-g component over a 4.6-mm stroke in a Stirling-cycle cryogenic refrigerator being developed for long-service (5-10-yr) space applications (Stolfi et al., 1983). Mosaics of 10 radially magnetized high-coercivity SmCO5 segments enclosed in Ti cans are employed, and the device is found to have quality factor 70-100, corresponding to energy-storage efficiency 91-94 percent. Drawings, diagrams, and graphs are provided.

Patt, P. J.↗
NASA NTRS1987

Control design challenges of large space systems and spacecraft control laboratory experiment (SCOLE)

The quick suppression of the structural vibrations excited by bang-bang (BB) type time-optional slew maneuvers via modal-dashpot design of velocity output feedback control was investigated. Simulation studies were conducted, and modal dashpots were designed for the SCOLE flexible body dynamics. A two-stage approach was proposed for rapid slewing and precision pointing/retargeting of large, flexible space systems: (1) slew the whole system like a rigid body in a minimum time under specified limits on the control moments and forces, and (2) damp out the excited structural vibrations afterwards. This approach was found promising. High-power modal/dashpots can suppress very large vibrations, and can add a desirable amount of active damping to modeled modes. Unmodeled modes can also receive some concomitant active damping, as a benefit of spillover. Results also show that not all BB type rapid pointing maneuvers will excite large structural vibrations. When properly selected small forces (e.g., vernier thrusters) are used to complete the specified slew maneuver in the shortest time, even BB-type maneuvers will excite only small vibrations (e.g., 0.3 ft peak deflection for a 130 ft beam).

Lin, Jiguan Gene↗
NASA NTRS1991

Containerless processing at high temperatures using acoustic levitation

Advanced techniques are presented which facilitate the development of inert or reducing atmospheres in excess of 2000 K in order to improve processing of containerless capabilities at higher temperatures and to provide more contamination-free environments. Recent testing, in the laboratory and aboard the NASA KC-135 aircraft, of a high-temperature acoustic positioner demonstrated the effectiveness of a specimen motion damping system and of specimen spin control. It is found that stable positioning can be achieved under ambient and heated conditions, including the transient states of heat-up and cool-down. An incorporated high-temperature levitator was found capable of processing specimens of up to 6-mm diameter in a high-purity environment without the contaminating effects of a container at high temperatures and with relative quiescence.

Rey, C. A.↗
NASA NTRS1992

Design of bearings for rotor systems based on stability

Design of rotor systems incorporating stable behavior is of great importance to manufacturers of high speed centrifugal machinery since destabilizing mechanisms (from bearings, seals, aerodynamic cross coupling, noncolocation effects from magnetic bearings, etc.) increase with machine efficiency and power density. A new method of designing bearing parameters (stiffness and damping coefficients or coefficients of the controller transfer function) is proposed, based on a numerical search in the parameter space. The feedback control law is based on a decentralized low order controller structure, and the various design requirements are specified as constraints in the specification and parameter spaces. An algorithm is proposed for solving the problem as a sequence of constrained 'minimax' problems, with more and more eigenvalues into an acceptable region in the complex plane. The algorithm uses the method of feasible directions to solve the nonlinear constrained minimization problem at each stage. This methodology emphasizes the designer's interaction with the algorithm to generate acceptable designs by relaxing various constraints and changing initial guesses interactively. A design oriented user interface is proposed to facilitate the interaction.

Dhar, D.↗
NASA NTRS1992

Nonlinear vibration and radiation from a panel with transition to chaos

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling), and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance bifurcation is diffused and difficult to maintain; thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on an aluminum panel and a graphite epoxy panel having the same size and weight. Good agreement is obtained betwen the experimental and numerical results.

Maestrello, Lucio↗
NASA NTRS1992

Nonlinear vibration and radiation from a panel with transition to chaos induced by acoustic waves

The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling) and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance, bifurcation is diffused and difficult to maintain, thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on aluminum panel and using a graphite epoxy panel having the same size and weight. Good agreement is obtained between the experimental and numerical results.

Maestrello, Lucio↗
NASA NTRS1993

On eigensystem assignment with dissipativity constraints

Stability of the closed-loop system is of vital importance when controller synthesis is being performed using a reduced order model of the open-loop plant. For passive systems such as flexible space structures, closed-loop stability is often ensured by low-authority dissipative controllers using collocated and compatible sensors and actuators. This paper considers the problem of eigensystem assignment for flexible structures using constant-gain output feedback, under the dissipativity constraints requiring that the gain matrices be nonnegative definite. A novel method is developed in which a sequential procedure is used to assign one complex-conjugate pair of closed-loop eigenvalues in each step. At each step, an iterative technique is employed for generating a nonnegative definite gain matrix that assigns a new pair while keeping the previously assigned pairs unchanged. This method can assign up to m closed-loop system eigenvalues, where m is the number of control inputs. A numerical example of damping enhancement for a large flexible structure is presented to demonstrate the approach.

Maghami, Peiman G.↗
NASA NTRS1994

Vibration suppression with approximate finite dimensional compensators for distributed systems: Computational methods and experimental results

Based on a distributed parameter model for vibrations, an approximate finite dimensional dynamic compensator is designed to suppress vibrations (multiple modes with a broad band of frequencies) of a circular plate with Kelvin-Voigt damping and clamped boundary conditions. The control is realized via piezoceramic patches bonded to the plate and is calculated from information available from several pointwise observed state variables. Examples from computational studies as well as use in laboratory experiments are presented to demonstrate the effectiveness of this design.

Banks, H. T.↗
NASA NTRS1995

Numerical modeling of Bridgman growth of PbSnTe in a magnetic field

In this work we study heat and mass transport, fluid motion, and solid/liquid phase change in the process of steady Bridgman growth of Pb(.8)Sn(.2)Te (LTT) in an axially-imposed uniform magnetic field under terrestrial and microgravity conditions. In particular, this research is concerned with the interrelationships among segregation, buoyancy-driven convection, and magnetic damping in the LTT melt. The main objectives are to provide a quantitative understanding of the complex transport phenomena during solidification of the nondilute binary of LTT, to provide estimates of the strength of magnetic field required to achieve the desired diffusion-dominated growth, and to assess the role of magnetic damping for space and earth based control of the buoyancy-induced convection. The problem was solved by using FIDAP and numerical results for both vertical and horizontal growth configurations with respect to the acceleration of gravity vector are presented.

Yao, Minwu↗
NASA NTRS1998

Design of Constant Gain Dissipative Controllers for Eigensystem Assignment in Passive Systems

Partial eigensystem assignment with output feedback can lead to an unstable closed-loop system. However, output feedback with passive linear time-invariant systems, such as flexible space structures, is guaranteed to be stable if the controller is dissipative. This paper presents a novel approach for synthesis of dissipative output feedback gain matrices for assigning a selected number of closed-loop poles. Dissipativity of a gain matrix is known to be equivalent to positive semidefiniteness of the symmetric part of the matrix. A sequential procedure is presented to assign one self-conjugate pair of closed-loop eigenvalues at each step using dissipative output feedback gain matrices, while ensuring that the eigenvalues assigned in the previous steps are not disturbed. The problem of assigning one closed-loop pair is reduced to a constrained solution of a system of quadratic equations, and necessary and sufficient conditions for the existence of a solution are presented. A minimax approach is presented for determining parameters which satisfy these conditions. This method can assign as many closed-loop system poles as the number of control inputs. A numerical example of damping enhancement for a flexible structure is presented to demonstrate the approach.

Maghami, Peiman G.↗
NASA NTRS1960

A Theoretical Study of the Angular Motions of Spinning Bodies in Space

A theoretical study was made of the angular motions of spinning bodies in space. The analysis was based on Euler's dynamic equations which were linearized and solved analytically. The results of the study are directly applicable only to spin-stabilized vehicles with constant moments of inertia and angular displacements not exceeding about 15 degrees. Simple analytical expressions were obtained which relate angular motions to spin-rate and inertia distributions for a given disturbance. Consideration was given to the effects produced by having artificial damping in the system. The study included numerical examples and comparisons of analytical solutions with machine solutions of exact dynamic equations. The analysis indicated that angular motions are sensitive to inertia distribution. In considering a rectangular-pulse pitching moment, it was found that the residual motion was very sensitive to the time at which the moment was removed. Artificial damping due to a perfect proportional control system seemed to be more advantageous to pencil-like configurations than to disk-like configurations.

Suddath, Jerrold H.↗