Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cumulative impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The International Space Station and the Space Debris Environment: 10 Years On

For just over a decade the International Space Station (ISS), the most heavily protected vehicle in Earth orbit, has weathered the space debris environment well. Numerous hypervelocity impact features on the surface of ISS caused by small orbital debris and meteoroids have been observed. In addition to typical impacts seen on the large solar arrays, craters have been discovered on windows, hand rails, thermal blankets, radiators, and even a visiting logistics module. None of these impacts have resulted in any degradation of the operation or mission of the ISS. Validating the rate of small particle impacts on the ISS as predicted by space debris environment models is extremely complex. First, the ISS has been an evolving structure, from its original 20 metric tons to nearly 300 metric tons (excluding logistics vehicles) ten years later. Hence, the anticipated space debris impact rate has grown with the increasing size of ISS. Secondly, a comprehensive visual or photographic examination of the complete exterior of ISS has never been accomplished. In fact, most impact features have been discovered serendipitously. Further complications include the estimation of the size of an impacting particle without knowing its mass, velocity, and angle of impact and the effect of shadowing by some ISS components. Inadvertently and deliberately, the ISS has also been the source of space debris. The U.S. Space Surveillance Network officially cataloged 65 debris from ISS from November 1998 to November 2008: from lost cameras, sockets, and tool bags to intentionally discarded equipment and an old space suit. Fortunately, the majority of these objects fall back to Earth quickly with an average orbital lifetime of less than two months and a maximum orbital lifetime of a little more than 15 months. The cumulative total number of debris object-years is almost exactly 10, the equivalent of one piece of debris remaining in orbit for 10 years. An unknown number of debris too small to be tracked and cataloged have also been generated, but normally with even shorter orbital lifetimes. Finally, eight collision avoidance maneuvers have been performed to avoid potential collisions between ISS and large, tracked space debris. The most recent such maneuver was accomplished by ESA's Automated Transfer Vehicle, the Jules Verne, just three months before the 10th anniversary of the launch of ISS's first element.

Johnson, Nicholas↗

A review of micrometeoroid flux measurements and models for low orbital altitudes of the Space Station

A review of meteoroid flux measurements and models for low orbital altitudes of the Space Station has been made in order to provide information that may be useful in design studies and laboratory hypervelocity impact tests which simulate micrometeoroids in space for design of the main wall of the Space Station. This report deals with the meteoroid flux mass model, the defocusing and shielding factors that affect the model, the probability of meteoroid penetration of the main wall of a Space Station. Whipple (1947) suggested a meteoroid bumper, a thin shield around the spacecraft at some distance from the wall, as an effective device for reducing penetration, which has been discussed in this report. The equations of the probability of meteoroid penetration, the average annual cumulative total flux, and the equations for the thickness of the main wall and the bumper are presented in this report.

Susko, M.↗

Vulnerability Studies Under EMP: Impedance and PCI Testing of the Grid Control Devices

Control devices such as inverters and generator controllers are critical for the stable operation of the power grid, especially for power stability control and power dispatch. However, the Electromagnetic Pulse (EMP) is a potential threat to electronic devices in modern power grids, therefore decreasing the power grid resilience and bringing unrecoverable damages to the devices. To reveal the impact mechanism of the EMP, impedance and Pulse Current Injection (PCI) testing is established to study the vulnerability of the grid control devices. The impedance of the grid control devices is accurately measured using impedance analyzers with different frequency ranges. Then the voltage and current responses are tested based on the PCI testing. The vulnerability experiments based on two grid control devices are carried out. And the comparison results reveal that most ports would be damaged under EC8, and some ports can survive under EC5 according to the calculated PCI response and cumulative energy. The results can provide a reference for the future design of control devices and the strategic resilience of power grids.

Qiu, Wei↗

Proceedings of Lunar and Planetary Science, Volume 22; Conference, Houston, TX, Mar. 18-22, 1991

Various papers on lunar and planetary science are presented. Individual topics addressed include: analysis of Phobos Mission Gamma ray spectra from Mars, comparison of volcanic and modified landforms from Tharsis Montes on Mars, polygenetic origin of Hrad Vallis region of Mars, new evidence of lacustrine basins on Mars, flood surge through the Lunae Planum Outflow Complex on Mars, interpretation of canyon materials and flood sources on Kasei Valles on Mars, geochemistry of Manson Impact structure rocks, micrometer-sized glass spheres in Apollo 16 soil 61181, isotopic abundances in Pesyanoe of solar-type xenon, mineralogy of 12 large 'chondritic' interplanetary dust particles. Also discussed are: trace elements in chondritic stratospheric particles, evolution of isotopic signatures in lunar regolith nitrogen, pyroclastic deposits on the western limb of the moon, origin of picritic green glass magmas by polybaric fractional fusion, origin of yellow glasses associated with Apollo 15 KREEP basalt fragments, trace elements in 59 mostly highland moon rocks, mineralization on the moon, relation between diogenite cumulates and eucrite magmas.

Ryder, Graham↗

Probing Galaxy Formation and Evolution with Space Born Sub-Millimeter Telescopes

A major unresolved question in cosmology is how the complex system of galaxies we see in the present universe evolved from an almost perfectly smooth beginning. Multiwavelength observations of galaxies have revealed that a significant fraction of their UV-visible starlight is absorbed and reradiated by dust at infrared JR) and submillimeter wavelengths. The cumulative IR-submm. emission from galaxies since the epoch of recombination, the cosmic IR background, has recently been recorded by the COBE satellite. The COBE observations in combination with recent submm surveys conducted with the SCUBA on the 15 m JCMT have shown that most of the radiation from star formation that has taken place in the early stages of galaxy evolution is reradiated by dust at submm wavelengths. Therefore, submm telescopes offer a unique probe of the early stages of galaxy formation and evolution. This talk will: (1) consider the impact of telescope diameter on the depth of the survey (what redshift can be probed) at different wavelengths; (2) discuss the relative scientific merits of high-resolution narrow-field surveys versus lower resolution deep surveys; and (3) show how both strategies offer complementary information crucial to our understanding of the structure and evolution of galaxies in the universe.

Dwek, Eli↗

Modeling gas migration through clay-based buffer material using coupled multiphase fluid flow and geomechanics with stress-dependent gas permeability

A model for gas migration through clay-based buffer material is developed for modeling gas generation and migration associated with deep geologic nuclear waste disposal. The model is based on a multiphase fluid flow and geomechanics simulator that is adapted to consider enhanced gas flow when gas pressure is high enough to approach the confining stress magnitude. A key feature in the model is a direct coupling between gas permeability and stress, through a non-linear stress-dependent permeability function. The model was first tested and calibrated by modelling two different laboratory gas migration tests on Wyoming (MX-80) bentonite samples. The calibrated model was then applied to model gas migration through a bentonite buffer of a large-scale gas injection test (Lasgit) conducted at the Äspö Hard Rock Laboratory in Sweden. Observed preferential gas migration along interfaces (between compacted blocks and along the canister surface) required explicit representation of such interfaces in the model. The model with the stress-dependent gas permeability accurately captured observed experimental responses in terms of gas breakthrough time, peak gas pressure, and cumulative gas flow rates. The calibrated model was finally applied to simulate migration of hydrogen gas generated within a breached nuclear waste canister over 10,000 years, involving migration of much larger gas volumes. For the considered gas generation rate and host rock properties, the generated gas could migrate through the bentonite buffer and released into the surrounding host rock at a maximum gas pressure somewhat higher than the initial total stress, though a significant amount of hydrogen remained within the buffer. This modelling sets the stage for further detailed analysis of the impact of hydrogen gas generation on the long-term performance of nuclear waste repositories.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Multiple Igneous Bodies for Nakhlites and Chassignites as Inferred from Olivine Cooling Rates using Calcium Zoning

Nakhlites and chassignites are ultramafic cumulate rocks of clinopyroxene and olivine, respec-tively, considered to have been formed in a thick lava flow or shallow intrusion near the Martian surface [e.g., 1,2]. Although more than 100 Martian meteorites have been found so far, most of them are shergottites and only nine nakhlites and three chassignites are known (considering paired samples) [3]. In contrast to shergottites which show large variations in both mineralogy and ages, nakhlites and chassignites are suggested to have been petrogenetically related, crystallized at about the same time and been ejected by the same impact event because of their identical crystallization (approximately 1.3 Ga) and cosmic-ray exposure (10-11 My) ages [e.g., 1]. In this study we discuss the possibility of a common igneous body for all samples belonging to these two groups as suggested by previous studies [e.g., 4]. To do this we estimated cooling rates of olivine using Ca zoning profiles, especially by paying attention to the newest samples of each group (NWA 10720 nakhlite and NWA 8694 chassignite).

Mikouchi, T.↗

Economic and embodied energy analysis of integrated circuit manufacturing processes

Integrated circuits (ICs) are the fundamental microelectronic building blocks of typical information and communication technology (ICT) devices such as laptops and smartphone. With the emergence of faster and cheaper low-power ICs for the growing ICT market, there is a limited information on their manufacturing energy and economic impacts owing to the lack of recurrent upgradation of proprietary IC manufacturing process data. In this work, economic and life cycle energy assessments (LCAs) of IC manufacturing and assembly processes were conducted using the latest bill of materials (BOM) manufacturing data in a state-of-the-art IC manufacturing cost software tool developed by IC Knowledge, LLC. IC manufacturing cost was estimated to be $\$$1.00-$\$$5.00/cm 2 ; the high-end cost represents the most advanced 3D NAND IC technology with the Wafer Level Chip Scale Package cost of $4/cm 2 . Total cumulative energy demand (CED) estimates of IC manufacturing using the OpenLCA software ranged from 9 to 38 MJ/cm 2 or 56–235 BJ/month with the largest share (~ 75%) from on-site energy. The IC manufacturing CED is projected to increase with the progress in IC technology node, which has increased by more than two times for technology node evolution from 110 to 14 nm. Furthermore, the representative detailed BOM data were considered to reduce the CED uncertainties of the estimated standard deviation of 35%- 42%.

97 MATHEMATICS AND COMPUTING↗

Megaregolith insulation and the duration of cooling to isotopic closure within differential asteroids and the moon

Global cooling of the moon and large (R = 40-250 km) asterodis, was modeled, starting at or near the solidus. A crucial factor in determining the prevailing interval (Ic) of cooling between igenous crystallization and isotopic closure, for any given depth in the crust, is the extent to which the body is insulated by a regolith/megaregolith layer of porous, fragmental impact debris. Given plausible assumptions regarding the thicknesses of such layers on the moon and the eucrite parent asteroid (and regarding the radius of the eucrite asteroid), the results indicate that deep-crustal regions tend to remain above the Nd and Sr isotopic closure temperature for intervals that are long in comparison to the precision of modern Nd- and Sr-based age measurements, and in comparison to suggested chronologic scenarios of global differentiation. Ic intervals of as long as 100 my may be common among available samples of primordial, deep-crustal cumulates from both bodies. Chronologies for the gross solidification of the moon and the eucrite asteroid should allow for the possibility that any single age for a coarse-grained 'plutonic' or cumulate-textured rock might be many tens of millions of years younger than the igneous crystallization age.

Warren, Paul H.↗

Intercropping kura clover with prairie cordgrass mitigates soil greenhouse gas fluxes

Prairie cordgrass (PCG) ( Spartina pectinata Link) has a high tolerance to soil salinity and waterlogging, therefore, it can thrive on marginal lands. Optimizing the nitrogen (N) input is crucial to achieving desirable biomass production of PCG without negatively impacting the environment. Thus, this study was based on the hypothesis that the use of legumes such as kura clover ( Trifolium ambiguum M. Bieb.) (KC) as an intercrop with PCG can provide extra N to the crop reducing the additional N fertilizer and mitigating soil surface greenhouse gas (GHG) emissions. Specific objective of the study was to assess the impact of PCG managed with different N rates [0 kg N ha -1 (PCG-0N), 75 kg N ha -1 (PCG-75N), 150 kg N ha -1 (PCG-150N), and 225 kg N ha -1 (PCG-255N)], and PCG intercropped with KC (PCG-KC) on GHG fluxes and biomass yield. The experimental site was established in 2010 in South Dakota under a marginally yielding cropland. The GHG fluxes were measured from 2014 through 2018 growing seasons using the static chamber. Net global warming potential (GWP) was calculated. Data showed that cumulative CH 4 and CO 2 fluxes were similar for all the treatments over the study period. However, the PCG-KC, PCG-0N, and PCG-75N recorded lower cumulative N 2 O fluxes (384, 402, and 499 g N ha -1 , respectively) than the PCG-150N (644 g N ha -1 ) and PCG-255N (697 g N ha -1 ). The PCG-KC produced 85% and 39% higher yield than the PCG-0N in 2016 and 2017, respectively, and similar yield to the other treatments (PCG-75N, PCG-150N, and PCG-255N) in these years. Net GWP was 52% lower for the PCG-KC (112.38 kg CO 2 -eq ha -1 ) compared to the PCG-225N (227.78 kg CO 2 -eq ha -1 ), but similar to other treatments. Soil total N was 15%% and 13% higher under PCG-KC (3.7 g kg -1 ) than that under PCG-0N (3.2 g kg -1 ) and PCG-75N (3.3 g kg -1 ), respectively. This study concludes that intercropping prairie cordgrass with kura clover can enhance biomass yield and reduce fertilizer-derived N 2 O emissions and net global warming potential.

09 BIOMASS FUELS↗

Private, public, and bottled drinking water: Shared contaminant-mixture exposures and effects challenge

Background: Humans are primary drivers of environmental–contaminant exposures worldwide, including in drinking-water (DW). In the United States, point-of-use DW (POU–DW) is supplied via private tapwater (TW), public-supply TW, and bottled water (BW). Differences in management, monitoring, and messaging and lack of directly–intercomparable exposure data influence the actual and perceived quality and safety of different DW supplies and directly impact consumer decision–making. Objectives: The purpose of this paper is to provide a meta-analysis (quantitative synthesis) of POU–DW contaminant–mixture exposures and corresponding potential human–health effects of private-TW, public-TW, and BW by aggregating exposure results and harmonizing apical–health–benchmark–weighted and bioactivity–weighted effects predictions across previous studies by this research group. Discussion: Simultaneous exposures to multiple inorganic and organic contaminants of known or suspected human-health concern are common across all three DW supplies, with substantial variability observed in each and no systematic difference in predicted cumulative risk between supplies. Differences in contaminant or contaminant–class exposures, with important implications for DW–quality improvements, were observed and attributed to corresponding differences in regulation and compliance monitoring. Conclusion: The results indicate that human-health risks from contaminant exposures are common to and comparable in all three DW–supplies, including BW. Importantly, this study’s target analytical coverage, which exceeds that currently feasible for water purveyors or homeowners, nevertheless is a substantial underestimation of the breadth of contaminant mixtures in the environment and potentially present in DW. Thus, the results emphasize the need for improved understanding of the adverse human-health implications of long-term exposures to low–level inorganic–/organic–contaminant mixtures across all three distribution pipelines and do not support commercial messaging of BW as a systematically safer alternative to public-TW. Regardless of the supply, increased public engagement in source-water protection and drinking–water treatment is necessary to reduce risks associated with long-term DW–contaminant exposures, especially in vulnerable populations, and to reduce environmental waste and plastics contamination.

54 ENVIRONMENTAL SCIENCES↗

Echogenic Segmentation for Ultrasonic Measurements of Spatially Distributed Properties in Solids

An ultrasonic (US) pulse propagating between transducer-receiver responds cumulatively to distributed material properties it encounters, such as temperature distribution. Such convolution makes the unique reconstitution of distributions impossible short of applying tomographic techniques. However, spatial heterogeneity in material properties is readily revealed by segmenting the US propagation path with echogenic features (EF), producing a train of echoes delayed as a function of segmentally localized properties. Unfortunately, in low attenuating waveguides (WGs), primary and trailing echoes (TE) interfere, limiting the number, density, and placement of EFs we can use. We report the design guidelines for creating US-segmented WGs for measuring distributed properties, in which the impact of TEs is minimized or eliminated. Two waveguide designs using these principles have been tested in spatially distributed temperature measurements in high-temperature or restrictive environments.

Walton, Kenneth↗

Evaluation of BISON metallic fuel performance modeling against experimental measurements within FIPD and IMIS databases

Simulations were conducted using the BISON fuel performance code on an automated process to read initial and operating conditions from two databases—the Fuels Irradiation and Physics Database (FIPD) and Integral Fast Reactor Materials Information System (IMIS) database. These databases contain metallic fuel data from the Experimental Breeder Reactor-II (EBR-II) and the Fast Flux Test Facility (FFTF). The work demonstrates use of an integrated framework to access EBR-II fuel pin data for evaluating fuel performance models contained within BISON to predict fuel performance of next-generation metallic fuel systems. Between IMIS and FIPD, there is enough information to conduct 1,977 unique EBR-II metallic fuel pin histories from 29 different experiments, and 338 pins from FFTF MFF-3 and MFF-5 with varying levels of details between the two databases. Each of these fuel performance histories includes a high-resolution power history, flux history, coolant channel flow rates, and coolant channel temperatures, and new model developments in BISON since the initial demonstration of this integrated framework. Fission gas release (FGR), cumulative damage fraction, fuel axial swelling, FCCI wastage thickness, cladding profilometry, and burnup were all simulated in BISON and compared to post-irradiation examination (PIE) results to evaluate BISON fuel performance modeling. Implementation of new fuel performance models into a generic BISON input file coupled with IMIS and FIPD yielded results with a better representation of physics than the initial evaluation of the integrated framework. Cladding profilometry, FGR, and fuel axial swelling were found to be in good agreement with PIE measurements for most of the pins simulated. The chosen mechanical contact solver was found to significantly impact the axial fuel swelling and cladding strain predictions when used in conjunction with the U-Pu-Zr hot-pressing model since it bound the fuel to prevent further swelling and increased hydrostatic stresses. This work suggests that fuel performance modeling in BISON under steady-state conditions represents the PIE data well and should be reassessed when new PIE data become available in IMIS and FIPD databases and when improved physical models to better capture fuel performance are added to BISON.

Paaren, Kyle M.↗

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska’s North Slope - Pushing Ahead One Year Later

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska’s 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected, and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska’s challenging environment. The pilot is conducted in two pre-existing pairs of horizontal injectors and producers in an isolated fault block of the Schrader Bluff heavy oil reservoir at the Milne Point Field. A customized polymer blending and pumping unit injects HPAM polymer at a concentration of 1,750 ppm to achieve a target viscosity of 45 cP. Supporting coreflood laboratory experiments have focused on quantification of polymer retention in the rock, and effect of injection water salinity, polymer, and their combinations on oil recovery. The injection and production response of the pilot flood pattern is utilized to develop a history matched reservoir simulation model for forecasting oil recovery beyond the pilot. Finally, specially designed laboratory experiments address anticipated operating concerns regarding post-polymer breakthrough such as oil-water separation efficiency and polymer induced fouling of heater tubes. Polymer has been injected continuously since startup except for two short equipment modification shutdowns, and more recently a prolonged disruption due to polymer hydration issues at the J-pad field site. Cumulatively, over 600,000 lbs. of polymer has been injected, corresponding to ~7%PV. The two producers show significant decrease in the water cut, gradually increasing oil rate, and no polymer breakthrough. Two main observations from the coreflood are a significant uncertainty in polymer retention values, and positive oil recovery response to low salinity water (2,600 mg/liter TDS). The heterogeneity in the flood pattern presents some challenges in obtaining a robust history matched simulation model. Experimental results on produced fluids treatment indicate the formation of a dense polymer deposit, at certain conditions, on heating tubes that can negatively impact the heat transfer efficiency. The scientific knowledge, including the lessons learned during unanticipated shutdowns, quality control, logistics and field data that is being acquired from this effort has referential value for other planned EOR projects. Finally, by all indications, the polymer field pilot is steadily progressing toward achieving the ultimate goal of unlocking the massive heavy oil resources on Alaska North Slope (ANS).

Dandekar, Abhijit↗

The use of AntiMisting Kerosene (AMK) in turbojet engines

The effect of antimisting kerosene (AMK) flow characteristics on fan jet engines and the impact of degradation requirements on the fuel system was evaluated. It was determined from the present program that AMK fuel cannot be used without predegradation, although some degradation occurs throughout the fuel feed system, expecially in the fuel pumps. There is a tendency toward FM-9 AMK additive agglomeration and gel formation when the liquid flows at a critical velocity through very small passages. The data indicate this phenomenon to be a function of the degree of degradation, the passage size, the differential pressure, the fluid temperature, and the accumulated flow time. Additionally, test results indicate that the long term cumulative effects of this phenomenon may require more degradation than the theoretical requirement determined from short term tests.

Schmidt, H. W.↗

Assessment of Technologies for Noncryogenic Hybrid Electric Propulsion

The Subsonic Fixed Wing Project of NASA's Fundamental Aeronautics Program is researching aircraft propulsion technologies that will lower noise, emissions, and fuel burn. One promising technology is noncryogenic electric propulsion, which could be either hybrid electric propulsion or turboelectric propulsion. Reducing dependence on the turbine engine would certainly reduce emissions. However, the weight of the electricmotor- related components that would have to be added would adversely impact the benefits of the smaller turbine engine. Therefore, research needs to be done to improve component efficiencies and reduce component weights. This study projects technology improvements expected in the next 15 and 30 years, including motor-related technologies, power electronics, and energy-storage-related technologies. Motor efficiency and power density could be increased through the use of better conductors, insulators, magnets, bearings, structural materials, and thermal management. Energy storage could be accomplished through batteries, flywheels, or supercapacitors, all of which expect significant energy density growth over the next few decades. A first-order approximation of the cumulative effect of each technology improvement shows that motor power density could be improved from 3 hp/lb, the state of the art, to 8 hp/lb in 15 years and 16 hp/lb in 30 years.

Electric Propulsion↗

C fluxes from incubations of California upland soil with and without synthetic iron (hydr)oxide associations

There is a growing understanding that interactions with soil mineral phases contribute to the accumulation and retention of otherwise degradable organic matter in soils and sediments. However, the bioavailability of organic compounds in mineral-organic-associations, especially under varying environmental conditions is not well known. To assess the impact of mineral association and warming on the decomposition of an easily respirable organic substrate (glucose), we conducted a series of laboratory incubations at different temperatures with field-collected soils from 10 to 20 cm, 50–60 cm, and 80–90 cm depth at the Blodgett Forest Research Station. We added 13C-labeled glucose either directly to native soil or sorbed to one of two synthetic iron (hydr)oxide phases (goethite and ferrihydrite) that differ in crystallinity and affinity for sorbing glucose. We incubated the soils at 25 deg C. This dataset comprises the added glucose C and the cumulative fluxes over 72 and 1896 hours. We found that: (1) association with the Fe (hydr)oxide minerals reduced the decomposition rate of glucose by > 99.5% relative to rate of decomposition for free glucose in soil; (2) the respiration rate per gram carbon did not differ appreciably with depth, suggesting a similar degree of decomposability for native C across depths and that under the incubation conditions total carbon availability represents the principal limitation on respiration under these conditions as opposed to reduced abundance of decomposers or moisture and oxygen limitations; (3) addition of free glucose enhanced native carbon respiration at all soil depths with the largest effect at 50–60 cm; (4) in general respiration of the organo-mineral complex (glucose and iron-(hydr)oxide) was less temperature sensitive than was respiration of native carbon; (5) the addition of organic free mineral decreased the rate of soil respiration in the intermediate 50–60 cm depth soil. The results emphasize the key role of MOAs in regulating the fluxes of carbon from soils to the atmosphere and in turn the stocks of soil carbon.This dataset lists the glucose additions made to soils with and without added geothite or ferrihidrite and the C respired over the timespan of the incubations.

54 ENVIRONMENTAL SCIENCES↗

The DYNAMO Orbiter Project: High Resolution Mapping of Gravity/Magnetic Fields and In Situ Investigation of Mars Atmospheric Escape

Dynamo is a small Mars orbiter planned to be launched in 2005 or 2007, in the frame of the NASA/CNES Mars exploration program. It is aimed at improving gravity and magnetic field resolution, in order to better understand the magnetic, geologic and thermal history of Mars, and at characterizing current atmospheric escape, which is still poorly constrained. These objectives are achieved by using a low periapsis orbit, similar to the one used by the Mars Global Surveyor spacecraft during its aerobraking phases. The proposed periapsis altitude for Dynamo of 120-130 km, coupled with the global distribution of periapses to be obtained during one Martian year of operation, through about 5000 low passes, will produce a magnetic/gravity field data set with approximately five times the spatial resolution of MGS. Low periapsis provides a unique opportunity to investigate the chemical and dynamical properties of the deep ionosphere, thermosphere, and the interaction between the atmosphere and the solar wind, therefore atmospheric escape, which may have played a crucial role in removing atmosphere, and water, from the planet. There is much room for debate on the importance of current atmosphere escape processes in the evolution of the Martian atmosphere, as early "exotic" processes including hydrodynamic escape and impact erosion are traditionally invoked to explain the apparent sparse inventory of present-day volatiles. Yet, the combination of low surface gravity and the absence of a substantial internally generated magnetic field have undeniable effects on what we observe today. In addition to the current losses in the forms of Jeans and photochemical escape of neutrals, there are solar wind interaction-related erosion mechanisms because the upper atmosphere is directly exposed to the solar wind. The solar wind related loss rates, while now comparable to those of a modest comet, nonetheless occur continuously, with the intriguing possibility of important cumulative and/or enhanced effects over the several billion years of the solar system's life. If the detailed history of the Martian internal field could be traced back, and the current escape processes could be understood well enough to model the expected stronger losses under early Sun conditions, one could go a long way toward constraining this part of the mysterious history of Mars' atmosphere.

Smrekar, S.↗