Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous operation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Boosting Tin Perovskite Solar Cell Performance via Light-Induced Interface Doping

Continuous breakthroughs have been achieved in the photoelectric conversion efficiency (PCE) of tin-based perovskite solar cells (TPSCs) in recent years. Inspired by performance improvements observed during device storage, we identified beneficial light-induced interface doping (LIID) in the TPSCs. In situ analyses using X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy reveal that ion migration and oxidation at the interface induce beneficial doping effects, enhancing carrier transport and significantly boosting device performance. By implementing specific illumination techniques or maximum power point tracking (MPPT) methods to achieve LIID, we increased the open-circuit voltage while maintaining a high short-circuit current, reaching a PCE of up to 14.91%. Furthermore, this efficiency was sustained at 70% of its maximum value after nearly 900 h of continuous operation. Our study introduces a novel approach to addressing energy band mismatch, paving the way for improved efficiency in tin-based perovskite solar cells.

Sun, Mulin↗
DOE OSTI2022

Assessment of Protective Coatings for Metal-Supported Solid Oxide Electrolysis Cells

Green hydrogen is essential to achieving carbon neutrality, and solid oxide electrolysis cells can produce hydrogen using renewable power and waste heat. Insufficient long-term durability of solid oxide electrolysis cells has impeded their commercialization. Here, coatings in the porous stainless steel support of metal-supported solid oxide electrolysis cells (MS-SOECs) are used to dramatically improve their performance and durability. The long-term degradation rate of uncoated MS-SOECs is highly dependent on the current density, with the fastest degradation occurring at the highest current density tested, 0.5 A cm -2 . At this current density, coatings are quite effective. Three protective coatings, Co 3 O 4 deposited by atomic layer deposition (ALD), Co 3 O 4 deposited by electroplating deposition (ED), and CuMn 1.8 O 4 (CMO) deposited by electrophoretic deposition (EPD), are explored to enhance the performance of MS-SOECs with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 -Sm 0.2 Ce 0.8 O 3 (LSCF-SDC) as the oxygen catalyst and SDC-Ni as the fuel catalyst. The initial average current density at 1.4 V is increased with coatings. It is 0.83 mA cm -2 for the ALD cells, 1.05 mA cm -2 for the ED cells, and 1.13 mA cm -2 for the EPD cells, compared to 0.65 mA cm -2 for the bare cells at 700 °C with 50% H 2 -50% H 2 O. The degradation rate over 1000 h of continuous operation is reduced from 36% to 26%, 27%, and 19% kh -1 with the three coatings, respectively. Furthermore, these improvements are ascribed to reduced Cr poisoning on the oxygen catalyst, which is one of the primary degradation modes for this type of MS-SOEC.

25 ENERGY STORAGE↗
DOE OSTI2025

Highly Selective Electrolytic Reduction of CO 2 to Ethylene

We investigate the reduction of CO 2 to ethylene across buffered anolyte pH values 4 to 14 using a copper–phosphorus (Cu–P) electrocatalyst in a zero-gap membrane electrode assembly. Electrochemical CO 2 reduction using alkaline electrolytes typically shows limited carbon efficiencies and single-pass efficiencies, while acidic conditions typically favor the hydrogen evolution reaction. Results from this work show that weakly phosphate-buffered acidic anolytes (pH 6) maximize ethylene production with a 73% FE at 300 mA cm –2 and 51% FE at 500 mA cm –2 , including a 51% single-pass CO 2 conversion efficiency for over 400 h of continuous operation. We propose a mechanism based on pH-dependent CO coverage that controls the selectivity at the *HCCOH intermediate. Low CO coverage at pH 6 favors hydroxide elimination to *CCH, yielding ethylene (98% of C 2 products), while high coverage at pH 14 promotes hydrogenation to ethanol (44% of C 2 ). The HER mechanism transitions from H 2 O-mediated at pH 14 to phosphate-mediated (H 2 PO 4 – /HPO 4 2– ) at weakly acidic pH, minimizing HER competition at pH 6. This mechanistic understanding enables controlled C 2 product selectivity through manipulation of the CO coverage and local proton activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance of Spherical Quantum Well Down Converters in Solid State Lighting

We report the color conversion performance of amber and red emitting quantum dots (QDs) on InGaN solid-state lighting (SSL) light emitting diode (LED) packages. Spherical quantum well (SQW) architectures (CdS/CdSe 1- x S x /CdS) were prepared using a library of thio- and selenourea synthesis reagents and high throughput synthesis robotics. CdS/CdSe 1- x S x QDs with narrow luminescence bands were coated with thick CdS shells (thickness = 1.6-7.5 nm) to achieve photoluminescence quantum yields (PLQY) up to 88% at amber and red emission wavelengths (λ max = 600-642 nm, FWHM < 45 nm). The photoluminescence from SQWs encapsulated in silicone and deposited on LED packages was monitored under accelerated aging conditions (oven temperature = 85 °C, relative humidity = 5-85%, blue optical power density = 3-45 W/cm 2 ) by monitoring the red photon output over several hundred hours of continuous operation. The growth of a ZnS shell on the SQW surface increases the stability under long-term operation but also reduces the PLQY, especially of SQWs with thick CdS shells. The results illustrate that the outer ZnS shell layer is key to optimizing the PLQY and the long-term stability of QDs during operation on SSL packages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Water-Fed Hydroxide Exchange Membrane Electrolyzer Enabled by a Fluoride-Incorporated Nickel–Iron Oxyhydroxide Oxygen Evolution Electrode

Here, we have developed a dissolved oxygen and galvanic corrosion method to synthesize vertically aligned fluoride-incorporated nickel–iron oxyhydroxide nanosheet arrays on a compressed Ni foam as an efficient self-supported oxygen evolution electrode. It is integrated with poly(aryl piperidinium) hydroxide exchange membrane and ionomers with high ion exchange capacity into a hydroxide exchange membrane electrolyzer fed with pure water, which achieves a performance of 1020 mA cm –2 at 1.8 V and prevents the detachment of catalysts during continuous operation (>160 h at 200 mA cm –2 ). Furthermore, this work provides a potential pathway for massively producing low-cost hydrogen using intermittent renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

An Active and Robust Air Electrode for Reversible Protonic Ceramic Electrochemical Cells

Reversible protonic ceramic electrochemical cells (RPCECs) are a promising option for efficient and low-cost generation of electricity and hydrogen. Commercialization of R-PCECs, however, hinges on the development of highly active and robust air electrodes. Here, we report an air electrode consisting of PrBa 0.8 Ca 0.2 Co 2 O 5+δ and in situ exsolved BaCoO 3–δ nanoparticles (PBCC–BCO) that shows minimal polarization resistance (~0.24 Ω cm 2 at 600 °C) and high stability when exposed to humidified air with 3–50% H 2 O. An R-PCEC utilizing PBCC-BCO demonstrates remarkable performances at 600 °C: achieving a peak power density of 1.06 W cm –2 in the fuel cell mode and a current density of 1.51 A cm –2 at 1.3 V in an electrolysis mode. More importantly, the RPCECs demonstrate an exceptionally high durability over 1833 h of continuous operation in the electrolysis mode. Furthermore, this work offers an efficient approach to design of high-performance and durable electrodes for R-PCECs.

25 ENERGY STORAGE↗
DOE OSTI2024

TiO 2 /TiN Interface Enables Integration of Ni 5 P 4 Electrocatalyst with a III–V Tandem Photoabsorber for Stable Unassisted Solar-Driven Water Splitting

H 2 production by direct photoelectrochemical (PEC) water splitting has remained unachievable commercially, mainly due to rapid failure at the interface between the photoabsorber(s) and catalyst(s). PEC devices made from multijunction III-V semiconductors with platinum group metal (PGM) catalysts have yielded impressive initial solar-to-H 2 (STH) efficiency >19%, which rapidly corrodes in aqueous electrolytes. Here, TiO 2 /TiN layers were fused to create a bifunctional interface between a GaInP 2 /GaAs III-V tandem photoabsorber and a polycrystalline Ni 5 P 4 HER catalyst. Here, the TiO 2 serves as a conducting corrosion barrier, while a thin layer of much denser TiN (1 nm) blocks interlayer diffusion during fabrication. This strategy allows the elevated temperatures needed to crystallize the Ni 5 P 4 nanoparticles and fuse to the TiO 2 /TiN junction to achieve minimal optical loss without damaging the sensitive photoasbsorber. The resulting photocathode exhibits an initial STH efficiency of 11.4%-13.2% in sodium phosphate electrolyte at neutral pH 7. It operated continuously for over 200 h without failure above 10% STH efficiency, exceeding all previous benchmarks. The earth-abundant Ni 5 P 4 catalyst replaces costly PGM catalysts at comparable HER activity in neutral, acidic, or basic pH electrolytes.

08 HYDROGEN↗
DOE OSTI2020

Characterizing Variability in Lignocellulosic Biomass: A Review

Feedstock variability is a significant barrier to the scale-up and commercialization of lignocellulosic biofuel technologies. Variability in feedstock characteristics and behavior creates numerous challenges to the biorefining industry by affecting continuous operation and biofuels yields. Recently, feedstock variability is understood and explained largely on the basis of chemical composition. Physical and mechanical properties and behavior of lignocellulosic feedstock in various unit operations, studied through advanced analytical methods, can further explain variability. Such studies will enable us in developing processes and designing equipment to improve operation and conversion performance. In this perspective, we review several advanced analytical methods that measure density, moisture content, thermal properties, flowability, grindability, rheology properties, and micromorphological characteristics. We also discuss the correlations and interactions among these properties that reflect the complexity of lignocellulosic biomass as a feedstock and the associated quality metrics and logistics of supplying consistent quality feedstock to a biorefinery. We further examine methods that have not traditionally been used to characterize lignocellulosic feedstocks but have the potential to bridge the gap in our explanation of feedstock variability.

09 BIOMASS FUELS↗
DOE OSTI2020

Performance of Base and Noble Metals for Electrocatalytic Hydrogenation of Bio-Oil-Derived Oxygenated Compounds

Electrocatalytic hydrogenation is a particularly attractive approach for converting the most unstable compounds in biogenic feedstocks at ambient conditions without external hydrogen. Here, we synthesized a variety of carbon-supported transition metal catalysts and characterized their activity for the electrocatalytic hydrogenation of a series of model compounds and pyrolysis oil. Carbonyl compounds, especially aromatic aldehydes, such as furfural and benzaldehyde, are particularly inclined to hydrogenation driven by an applied current. This was verified with pure solutions of the model compounds and with pyrolysis oil, where we achieved stable and steady continuous operation on Pd. By choosing the optimal catalyst composition, the conversion of benzaldehyde shifted from alcohol production (e.g., on Pd and Cu) to dimerization (e.g., on Co, Ni, and Zn). Pd and Cu were shown to offer the best compromise between reaction rates and efficiency although, in general, base metals offer similar conversions but better efficiencies that noble metals. Thus, the present work offers foundational results and guidelines for choosing the optimal metal catalyst and the applied potential for processing organic feedstocks as a function of its composition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using operando techniques to understand and design high performance and stable alkaline membrane fuel cells

There is a need to understand the water dynamics of alkaline membrane fuel cells under various operating conditions to create electrodes that enable high performance and stable, long-term operation. Here we show, via operando neutron imaging and operando micro X-ray computed tomography, visualizations of the spatial and temporal distribution of liquid water in operating cells. We provide direct evidence for liquid water accumulation at the anode, which causes severe ionomer swelling and performance loss, as well as cell dryout from undesirably low water content in the cathode. We observe that the operating conditions leading to the highest power density during polarization are not generally the conditions that allow for long-term stable operation. This observation leads to new catalyst layer designs and gas diffusion layers. This study reports alkaline membrane fuel cells that can be operated continuously for over 1000 h at 600 mA cm -2 with voltage decay rate of only 32-μV h -1 – the best-reported durability to date.

25 ENERGY STORAGE↗
DOE OSTI2023

Integrated halide perovskite photoelectrochemical cells with solar-driven water-splitting efficiency of 20.8%

Abstract Achieving high solar-to-hydrogen (STH) efficiency concomitant with long-term durability using low-cost, scalable photo-absorbers is a long-standing challenge. Here we report the design and fabrication of a conductive adhesive-barrier (CAB) that translates >99% of photoelectric power to chemical reactions. The CAB enables halide perovskite-based photoelectrochemical cells with two different architectures that exhibit record STH efficiencies. The first, a co-planar photocathode-photoanode architecture, achieved an STH efficiency of 13.4% and 16.3 h to t 60 , solely limited by the hygroscopic hole transport layer in the n-i-p device. The second was formed using a monolithic stacked silicon-perovskite tandem, with a peak STH efficiency of 20.8% and 102 h of continuous operation before t 60 under AM 1.5G illumination. These advances will lead to efficient, durable, and low-cost solar-driven water-splitting technology with multifunctional barriers.

08 HYDROGEN↗
DOE OSTI2025

Towards non-blinking and photostable perovskite quantum dots

Surface defect-induced photoluminescence blinking and photodarkening are ubiquitous in lead halide perovskite quantum dots. Despite efforts to stabilize the surface by chemically engineering ligand binding moieties, blinking accompanied by photodegradation still poses barriers to implementing perovskite quantum dots in quantum emitters. To date, ligand tail engineering in the solid state has rarely been explored for perovskite quantum dots. We posit that attractive intermolecular interactions between low-steric ligand tails, such as π-π stacking, can promote the formation of a nearly epitaxial ligand layer that significantly reduces the quantum dot surface energy. Here, we show that single CsPbBr 3 quantum dots covered by stacked phenethylammonium ligands exhibit nearly non-blinking single photon emission with high purity (~98%) and extraordinary photostability (12 hours continuous operation and saturated excitations), allowing the determination of size-dependent exciton radiative rates and emission line widths of CsPbBr 3 quantum dots at the single particle level.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Point-of-use filtration units as drinking water distribution system sentinels

Abstract Municipal drinking water distribution systems (DWDSs) and associated premise plumbing (PP) systems are vulnerable to proliferation of opportunistic pathogens, even when chemical disinfection residuals are present, thus presenting a public health risk. Monitoring the structure of microbial communities of drinking water is challenging because of limited continuous access to faucets, pipes, and storage tanks. We propose a scalable household sampling method, which uses spent activated carbon and reverse osmosis (RO) membrane point-of-use (POU) filters to evaluate mid- to long-term occurrence of microorganisms in PP systems that are relevant to consumer exposure. As a proof of concept, POU filter microbiomes were collected from four different locations and analyzed with 16S rRNA gene amplicon sequencing. The analyses revealed distinct microbial communities, with occasional detection of potential pathogens. The findings highlight the importance of local, and if possible, continuous monitoring within and across distribution systems. The continuous operation of POU filters offers an advantage in capturing species that may be missed by instantaneous sampling methods. We suggest that water utilities, public institutions, and regulatory agencies take advantage of end-of-life POU filters for microbial monitoring. This approach can be easily implemented to ensure drinking water safety, especially from microbes of emerging concerns; e.g., pathogenic Legionella and Mycobacterium species.

42 ENGINEERING↗
DOE OSTI2022

Non-iridium-based electrocatalyst for durable acidic oxygen evolution reaction in proton exchange membrane water electrolysis

Iridium-based electrocatalysts remain the only practical anode catalysts for proton exchange membrane (PEM) water electrolysis, due to their excellent stability under acidic oxygen evolution reaction (OER), but are greatly limited by their high cost and low reserves. Here, in this study, we report a nickel-stabilized, ruthenium dioxide (Ni-RuO 2 ) catalyst, a promising alternative to iridium, with high activity and durability in acidic OER for PEM water electrolysis. While pristine RuO 2 showed poor acidic OER stability and degraded within a short period of continuous operation, the incorporation of Ni greatly stabilized the RuO 2 lattice and extended its durability by more than one order of magnitude. When applied to the anode of a PEM water electrolyser, our Ni-RuO 2 catalyst demonstrated >1,000 h stability under a water-splitting current of 200 mA cm -2 , suggesting potential for practical applications. Density functional theory studies, coupled with operando differential electrochemical mass spectroscopy analysis, confirmed the adsorbate-evolving mechanism on Ni-RuO 2 , as well as the critical role of Ni dopants in stabilization of surface Ru and subsurface oxygen for improved OER durability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

In situ energetics modulation enables high-efficiency and stable inverted perovskite solar cells

In contrast to conventional (n-i-p) perovskite solar cells (PSCs), inverted (p-i-n) PSCs offer enhanced stability and integrability with tandem solar cell architectures, which have garnered increasing interest. However, p-i-n cells suffer from energy level misalignment with transport layers, imbalanced transport of photo-generated electrons and holes, and significant defects with the perovskite films. Here we introduce tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane (3TPYMB), a nonionic n-type molecule that, through hydrogen bonding and Lewis acid-base reactions with perovskite surfaces or grain boundaries, enables in situ modulation of perovskite energetics, effectively mitigating the key challenges of p-i-n PSCs. The p-i-n PSCs incorporating 3TPYMB achieve a certified quasi-steady-state power conversion efficiency of 24.55 +- 0.33%, with a reverse scan efficiency of 25.58%. Finally, they also exhibit exceptional stability, with unencapsulated devices retaining 97.8% of their initial efficiency after 1,800 h of continuous operation at maximum power point under N 2 atmosphere, 1 sun illumination and 60 °C conditions.

14 SOLAR ENERGY↗
DOE OSTI2023

An autonomous laboratory for the accelerated synthesis of novel materials

To close the gap between the rates of computational screening and experimental realization of novel materials, we introduce the A-Lab, an autonomous laboratory for the solid-state synthesis of inorganic powders. This platform uses computations, historical data from the literature, machine learning (ML) and active learning to plan and interpret the outcomes of experiments performed using robotics. Over 17 days of continuous operation, the A-Lab realized 41 novel compounds from a set of 58 targets including a variety of oxides and phosphates that were identified using large-scale ab initio phase-stability data from the Materials Project and Google DeepMind. Synthesis recipes were proposed by natural-language models trained on the literature and optimized using an active-learning approach grounded in thermodynamics. Analysis of the failed syntheses provides direct and actionable suggestions to improve current techniques for materials screening and synthesis design. The high success rate demonstrates the effectiveness of artificial-intelligence-driven platforms for autonomous materials discovery and motivates further integration of computations, historical knowledge and robotics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct methane activation by atomically thin platinum nanolayers on two-dimensional metal carbides

We report efficient and direct conversion of methane to value-added products has been a long-term challenge in shale gas applications. Here, we show that atomically thin nanolayers of Pt with a single or double atomic layer thickness, supported on a two-dimensional molybdenum titanium carbide (MXene), catalyse non-oxidative coupling of methane to ethane/ethylene (C 2 ). Kinetic and theoretical studies, combined with in-situ spectroscopic and microscopic characterizations, demonstrate that Pt nanolayers anchored at the hexagonal close-packed sites of the MXene support can activate the first C–H bond of methane to form methyl radicals that favour desorption over further dehydrogenation and thus suppress coke deposition. At 750 °C and 7% methane conversion, the catalyst runs for 72 hours of continuous operation without deactivation and exhibits >98% selectivity towards C 2 products, with a turnover frequency of 0.2–0.6 s -1 . Our findings provide insights into the design of highly active and stable catalysts for methane activation and create a platform for developing atomically thin supported metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Solvent-based plastic recycling technologies

Solvent-based recycling approaches are receiving industrial and academic interest for their ability to produce high-quality plastic resins from a variety of plastic waste sources without breaking the polymer chains. Here we highlight the development of solvent-based technologies, focusing on the underlying principles, techno-economic and life-cycle analyses, and commercialization. The basic steps in solvent-based recycling include plastic size reduction, plastic dissolution, filtration or centrifugation, and optional additional cleaning steps such as adsorption, precipitation and solvent removal. Impurities that build up in the solvent must also be removed. The goal of solvent-based technologies is to produce a high-quality resin without plastic contaminants or other added substances. Disadvantages of these solvent-based technologies are their physicochemical complexity and the difficulty in scaling up to achieve continuous operations with high polymer and solvent yields and throughputs. As a result, chemical engineering is thus critical in bringing solvent-based recycling technologies to market.

Chemical engineering↗