Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Intrinsic dosimetry of glass containers: A potential interrogation tool for nuclear forensics and waste management

Intrinsic dosimetry is the method of measuring total absorbed dose received by the walls of a container holding radioactive material. By considering the total absorbed dose received by a container in tandem with the physical characteristics of the radioactive material housed within that container, this method has the potential to provide law enforcement officials or waste management personnel with enhanced pathway information regarding the history of the container and its radioactive contents. We report the latest in a series of experiments designed to validate and demonstrate this newly developed tool. Thermoluminescence (TL) dosimetry was used to measure dose effects on the raw stock material of borosilicate container glass with time up to 60 days after gamma ray, x-ray, beta particle or ultraviolet irradiations at doses from 0.15 to 20 Gy. Two peaks were identified in the TL glow curve when irradiated with 60Co, a relatively unstable peak around 120°C and a more stable peak around 225°C. Signal strength of both peaks decayed with time. The minimum measurable dose using this technique was measured to be 0.15 Gy, which is roughly equivalent to a 24 hr irradiation at 1 cm from a 50 ng source of 60Co. After fading, this dose would still be observable approximately 1 year post-irradiation. Similar doses with beta particles and x-rays produced TL glow curves of lower intensity. The TL glow curves were separated into five peaks centered at approximately 120, 160, 225, 300, and 340°C. Differences in TL glow curve shape and intensity were observed for the glasses from different geographical origins. These differences can be explained by changes in the intensities of the five peaks. EPR results showed production of BOHC and E’ silica centers.

Clark, Richard A.↗

Facilitated Strontium Transport by Remobilization of Strontium-Containing Secondary Precipitates in Hanford Site Subsurface

Significantly enhanced immobilization of radionuclides (such as 90Sr and 137Cs) due to adsorption and coprecipitation with neo-formed colloid-sized secondary precipitates has been reported at the U.S. Department of Energy’s Hanford Site. However, the stability of these secondary precipitates containing radionuclides in the subsurface under changeable field conditions is not clear. Here, the authors tested the remobilization possibility of Sr containing secondary precipitates (nitrate-cancrinite) in the subsurface using saturated column experiments under different geochemical and flow conditions. The columns were packed with quartz sand that contained secondary precipitates (nitrate-cancrinite containing Sr), and leached using colloid-free solutions under different flow rates, varying pH, and ionic strength conditions. The results indicate remobilization of the neo-formed secondary precipitates could be possible given a change of background conditions. The remobility of the neo formed precipitates increased with the rise in the leaching solution flow rate and pH (in a range of pH 4 to 11), as well as with decreasing solution ionic strength. The increased mobility of Sr-containing secondary precipitates with changing background conditions can be a potential source for additional radionuclide transport in Hanford Site subsurface environments.

colloid↗

Microstructural characteristics of σ phase and P phase in Ru-containing single crystal superalloys

Microstructural instability caused by topologically close-packed (TCP) phase precipitation restricts the useful compositional range of advanced Ni-base single crystal superalloys in industrial applications. Limited systematic investigations of TCP formers (Cr and Mo) additions on microstructural evolution of both the σ phase and the P phase in Ru-containing single crystal superalloys have been reported. In this study, the microstructural characteristics of σ phase and P phase were investigated in three Ru-containing superalloys with different levels of Cr and Mo additions at 950 °C and 1100 °C by using phase extraction, X-ray diffraction, scanning electron microscope and high resolution transmission electron microscopy. The experimental results indicated that the high level additions of Cr and Mo promoted the formation of σ phase and P phase, respectively. The amount of σ phase was much higher than that of P phase after long term exposure at 950 °C and 1100 °C. The sheet-like σ phase existed in the alloy with higher Cr addition after thermal exposure at 950 °C and 1100 °C for 1000 h, while the needle-like P phase precipitated in high Mo content alloy after thermal exposure at 1100 °C for 1000 h and the intergrowth of σ phase and P phase was observed after thermal exposure at 950 °C for 500 h. Both the σ phase and P phase were enriched in Re, W, Cr and Mo, but the σ phase contained more Re and Cr while the P phase contained more Mo and Ni, and Ru was found in both phases. The nucleation of σ phase was much easier than P phase due to the more ledge steps in the interfacial structure between σ phase and matrix, as well as the higher partitioning ratios of Re, Cr and Mo. This study is helpful to understand the microstructural evolution of σ phase and P phase, and to optimize the alloy design in Ru-containing superalloys. - Highlights: •Microstructures of σ phase and P phase were characterized in detail. •Cr and Mo influenced the precipitation of σ phase and P phase, respectively. •Partitioning ratios and interfacial relationship decided precipitation behaviors.

36 MATERIALS SCIENCE↗

Intrinsic dosimetry of glass containers used to transport nuclear materials: Potential implications to the fields of waste management and nuclear forensics

Thermoluminescence (TL) and Electron Paramagnetic Resonance (EPR) dosimetry were used to measure dose effects in borosilicate glass with time, from 10 min to w60 days following exposure to a dose of up to 100 Gy. TL and EPR results were consistent and performed similarly, with both techniques capable of achieving an estimated limit of detection of between 0.5 and 1 Gy. Three peaks were identified in the TL glow curve at roughly 110 C, 205 C, and 225 C. The intensity of the 205 C peak was the dominant peak over the time period of this study. The stability of all of the peaks with time since irradiation increased with their corresponding temperature and no significant variation was observed in the glow curve response to a specified total dose attained at different dose rates. The intensity of the 205 C peak decreased logarithmically with time regardless of total dose. Based upon a conservative limit of detection of 3.3 Gy, a 100 Gy dose would still be detected 2.7E3 years after exposure. Here, we introduce the concept of intrinsic dosimetry, the measurement of the total absorbed dose received by the walls of a container containing radioactive material. The foreseen advantage of intrinsic dosimetry comes from considering the measured absorbed dose received by containers in concert with the characteristics (amount, type) of the source of that dose, the radioactive material contained within the walls of the container, in order to provide enhanced information about the history of an unknown sample in question. Three hypothetical scenarios are presented to introduce this method and to illustrate how intrinsic dosimetry might benefit the fields of nuclear forensics and waste management.

glass↗

High-CO 2 Requirement as a Mechanism for the Containment of Genetically Modified Cyanobacteria

As researchers engineer cyanobacteria for biotechnological applications, we must consider potential environmental release of these organisms. Previous theoretical work has considered cyanobacterial containment through elimination of the CO 2 -concentrating mechanism (CCM) to impose a high-CO 2 requirement (HCR), which could be provided in the cultivation environment but not in the surroundings. In this work, we experimentally implemented an HCR containment mechanism in Synechococcus sp. strain PCC7002 (PCC7002) through deletion of carboxysome shell proteins and showed that this mechanism contained cyanobacteria in a 5% CO 2 environment. We considered escape through horizontal gene transfer (HGT) and reduced the risk of HGT escape by deleting competence genes. We showed that the HCR containment mechanism did not negatively impact the performance of a strain of PCC7002 engineered for L-lactate production. In conclusion, we showed through coculture experiments of HCR strains with ccm-containing strains that this HCR mechanism reduced the frequency of escape below the NIH recommended limit for recombinant organisms of one escape event in 10 8 CFU.

59 BASIC BIOLOGICAL SCIENCES↗

Neutron diffraction studies of nickel-containing perovskite oxide catalysts exposed to autothermal reforming environments.

Six nickel-containing perovskite oxides (La{sub 1-x}Sr{sub x})M{sub 0.9}Ni{sub 0.1}O{sub 3{+-}{delta}}, where x = 0 or 0.2 and M = Cr, Fe, or Mn were used to catalyze the autothermal reforming of isooctane (C{sub 8}H{sub 18}) into a hydrogen-rich gas during short-term tests at 700 C. To determine the phase stability of the samples in the reducing environment of the reforming reactor, characterization studies of the as-prepared and tested perovskite samples were conducted using powder X-ray diffraction, powder neutron diffraction, transmission electron microscopy, and scanning electron microscopy. We determined that the reducing conditions of the microreactor caused metallic nickel to form in all six compositions. However, the extent of the nickel loss from the perovskite lattices varied: the chromium-containing compositions lost the least nickel, compared to the manganese- and iron-containing compositions, and the strontium-free compositions lost more nickel than their strontium-containing analogs. Five of the six perovskite compositions tested showed no breakdown of the perovskite lattice despite the loss of nickel from the B-sites, producing only the third example of a B-cation-deficient, 3d transition-metal-containing perovskite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-level computer molecular modeling for low-rank coal containing metal complexes and iron-catalyzed steam gasification

Low-rank coal is a complex mixture; consequently, it is necessary to develop simpler molecular representations for computational modeling. Our modeling objective has been to develop molecules suitable for semi-empirical (SE) computations of low-rank coal containing transition-metal complexes. These molecular models contain oxygen functional groups that are macro-ligands, forming coordination complexes with specific three-dimensional (3D) orientations; consequently, we develop models that encapsulate the properties of low-rank coals and can form metal complexes. The large computer resources required for SE calculations of these molecules limited their size; of the models examined, those containing numerous short links between phenyl groups caused excessive strain and were unsuitable to model transition-metal complexes. Computations (SE) of our models provided data on (i) hydrogen bonds of coal containing water, (ii) formation of aqua-inorganic species and transition-metal complexes, (iii) pyrolysis chemistry involving transformations of metal hydroxide/oxides, (iv) routes for H{sub 2} and CO formation, and (v) mechanism of iron-catalyzed steam gasification. Our char models, on the basis of transformations of the coal model, were consistent with low-temperature pyrolysis; these were disordered structures with some phenyl groups spaced between 0.35 and 0.4 nm. Smaller models of char and chars containing transition-metal clusters were optimized with SE and density functional theory (DFT) computations; these models were useful in modeling the mechanism of catalytic steam gasification. Our modeling of the mechanisms of iron-catalyzed steam gasification was consistent with experimental data. 44 refs., 5 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Tenth-order lepton anomalous magnetic moment: Second-order vertex containing two vacuum polarization subdiagrams, one within the other

This paper reports the tenth-order QED contribution to the g-2 of electron and muon from two gauge-invariant sets: Set I(g) and Set I(h). In the case of electron g-2, Set I(g) consists of nine Feynman diagrams which have a fourth-order vacuum-polarization loop containing another fourth-order vacuum-polarization loop. Set I(h) consists of 30 Feynman diagrams which have a proper sixth-order vacuum-polarization loop containing a second-order vacuum-polarization loop. The results of numerical integration, including mass-dependent terms containing one closed loop of muon, are 0.028 597 (4) ({alpha}/{pi}){sup 5} for Set I(g) and 0.001 685 (13) ({alpha}/{pi}){sup 5} for Set I(h), respectively. We also report the contributions of Set I(g) and Set I(h) to the muon anomaly. Diagrams included are those containing electron, muon, and tau-lepton loops. Their sums are 2.640 9 (4)({alpha}/{pi}){sup 5} and -0.564 8 (11)({alpha}/{pi}){sup 5}, respectively. The sum of contributions of Sets I(g) and I(h) containing only electron loops are in fair agreement with the recently obtained asymptotic analytic results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Preliminary Nuclear Containment Vessel Modeling for Multi-Hazard Probabilistic Risk Assessment under Seismic Hazards and Concrete Degradation

The current practice for natural phenomena hazards (NPH) risk assessment of nuclear facilities is to compute the risk for each hazard independently and then compound the total risk as a combination of single hazard risks. This state of practice does not consider correlations between hazards and the cascading impacts to structures, systems, and components (SSCs), and could thus underestimate the NPH risk or overestimate the nuclear facility safety. Events such as the Fukushima Daiichi accident have highlighted the importance of multi-hazard risk considerations to nuclear power plants (NPPs) that quantify the cascading damage effects to SSCs in the risk models. Moreover, the current fleet of NPPs in the United States is aging; these NPPs are now expected to operate well beyond their initially planned design life. Aging-related deterioration can potentially decrease the capacity of critical structures such as containment vessels to withstand NPH. Such aging considerations may not be adequately accounted for by the current NPH risk assessment guidelines. This paper presents a preliminary modeling and simulation of a representative reinforced concrete containment vessel subjected to seismic mainshock and aftershock considering concrete degradation due to alkali silica reaction. The broader aim is to develop multi-hazard time-dependent fragility functions that could be subsequently used in the probabilistic risk assessment (PRA) model. The multi-hazard component comes into play due to the consideration of damage to the containment vessel under seismic loads and concrete degradation. Consideration of concrete degradation also brings into play the time-dependent nature of the containment vessel response. The response of the containment vessel under varying degrees of concrete degradation to seismic loads is investigated. The results presented are simulated using the Multi-hazard Analysis for STOchastic time-DOmaiN phenomena (MASTODON) software for seismic analysis and the Blackbear software for concrete degradation and damage modeling. Both software are open source and developed within the Multiphysics Object-Oriented Simulation Environment (MOOSE).

42 ENGINEERING↗

Hydrogen Concentration in the Inner-Most Container within a Pencil Tank Overpack Packaged in a Standard Waste Box Package

A set of steady state diffusion flow equations, for the hydrogen diffusion from one bag to the next bag (or one plastic waste container to another), within a set of nested waste bags (or nested waste containers), are developed and presented. The input data is then presented and justified. Inputting the data for each volume and solving these equations yields the steady state hydrogen concentration in each volume. The input data (permeability of the bag surface and closure, dimensions and hydrogen generation rate) and equations are analyzed to obtain the hydrogen concentrations in the innermost container for a set of containers which are analyzed for the TRUCON code for the general waste containers and the TRUCON code for the Pencil Tank Overpacks (PTO) in a Standard Waste Box (SWB).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Similarity Analysis: Comparison of a Standard 60mL With a 50mL Container for MicroCT

A 50mL container with a one inch outer diameter has been proposed for holding specimen materials scanned at LLNL and Tyndall Air Force Research Laboratory (TAFRL). In order to determine whether or not this new container would significantly affect MicroCT results, a similarity analysis procedure developed at LLNL was used. This procedure compares multiple first and second order statistics obtained from CT reconstructed images generated by the MicroCT analysis process, and prescribes similarity constraints as guidance. For this study, water was scanned on the MicroCT system at LLNL, twice in the standard 60mL container and twice in the proposed 50mL container. Data were analyzed following the Standard Operating Procedure (SOP) for MicroCT analysis. Comparison of analytical results shows that the new container does not satisfy all similarity analysis criteria (certain second order statistics are outside of similarity analysis constraints).

42 ENGINEERING↗

Similarity Analysis: Comparison of a Standard 60mL With an Anti-Static Container for MicroCT

Pursuant to safety concerns, an anti-static container has been proposed for holding specimen materials scanned by an International Partner (IP) on a MicroCT system. In order to determine whether or not this new container would significantly affect MicroCT results, a similarity analysis procedure developed at LLNL was used. This procedure compares multiple first and second order statistics obtained from CT reconstructed images generated by the MicroCT analysis process, and prescribes similarity constraints as guidance. For this study, water was scanned on a MicroCT system in both a standard container and the proposed anti-static container under Test Plan 83. Data were analyzed following the Standard Operating Procedure (SOP) for MicroCT analysis. Comparison of analytical results shows that the anti-static container satisfies all similarity analysis criteria.

42 ENGINEERING↗

Feasibility Study of Non-Destructive Techniques to Measure Corrosion in SAVY Containers

Stainless Steel SAVY containers are used to transport and store nuclear material. They are prone to interior corrosion in the presence of certain chemicals and a low-oxygen environment. SAVY containers also have relatively thin walls to reduce their weight, making their structural integrity more vulnerable to the effects of corrosion. A nondestructive evaluation system that finds and monitors corrosion within containers in use would improve safety conditions and preclude hazards. Non-destructive testing can determine whether oxidation or corrosion is occurring inside the SAVY containers, and there are a variety of non-destructive testing methods that may be viable. The feasibility study described will objectively decide which method best fits the requirements of the facility and the problem. To improve efficiency, the containers cannot be opened during the non-destructive examination. The chosen technique should also be user-friendly and relatively quick to apply. It must also meet facility requirements regarding wireless technology and maintenance. A feasibility study is an objective search for a new technology or product to solve a particular problem. First, the design, technical, and facility feasibility requirements are chosen and ranked in order of importance. Then each technology considered is given a score based upon a standard ranking system. The technology with the highest total score is deemed the best fit for a certain application.

42 ENGINEERING↗

Microscopic Examination of the Corroded Hagan Container Used to Store Molten Salt Extraction Residue XBPS333

A microscopic examination was performed on a Hagan container after corrosion and a white powder were found on the outside surface of the lid and filter cover while in storage in the vault. The inside surfaces of the container were covered by a wipeable brown coating. The coating was removed and portions of the container were sectioned and imaged with optical microscopy. General corrosion was found throughout the inside of the container, and pitting corrosion was observed in several locations on the lid and sidewall. This report describes the type and extent of the corrosion observed and its impact on the storage lifetime of the container.

36 MATERIALS SCIENCE↗

Evaluation of the Performance of the SAVY Container Subjected to Various Impact Events using Finite Element Methods

The SAVY container is a Safety Class Design Feature utilized both inside engineered features and outside engineered features (e.g. gloveboxes) at TA-55 Plutonium Facility Building 4. These containers were certified as low damage ratio containers by demonstrating their ability to retain material after exposure to impacts and elevated temperatures resulting from a design basis seismic event. Original testing of the SAVY did not evaluate the effects of various facility specific insults to the SAVY while within a DOT Type A Container, caused either by design basis accident or an operational mishap. These insults include: 1. Impact of a structural I-beam (drum upright & drum on side); 2. Impact of a section of Positive Pressure Chilled Water Pipe (PPCWS); 3. Forklift fork tine impact; 4. Fuel truck impact. Abaqus Explicit Dynamics Finite Element Analysis was performed on a nested SAVY/DOT Type 7A container configuration to assess the structural integrity of the SAVY under the accident conditions listed.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Flanged Tritium Waste Containers: Background and Current Path to Disposal

The MLLW Flanged Tritium Waste Container (FTWC) Project has been operational since 2007 when, during an audit of the FTWC waste stream, it was determined that four FTWC containers contained lead in amounts greater than LDR treatment standards. From June to August of 2007, four FTWC containers were shipped to TA-54 for disposal as LLW from WETF. The contents of the FTWCs were characterized as high activity LLW and were thought to be in compliance with LANL's Waste Acceptance Criteria (WAC). During the packaging of these FTWC's, 36 intact squib valves (aka actuators), containing detonated squibs were included with the waste stream After being transported to TA-54 Area G, it was determined that the explosive used in some of the squibs was Normal Lead Styphnate (NLS). A recharacterization of the entire contents in the FTWC's was performed with the conclusion that the squib valves exhibited the RCRA toxic characteristic for Lead (D008), thus resulting in the contents of the FTWCs being reclassified as a Mixed LLW.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Augmented Monitoring and Condition Assessment Program (AMCAP) - Proof-of-Principle (POP) Mockup for Non-Aluminum Spent Nuclear Fuel Container In-Situ Examinations

A disciplined engineering approach is being followed to develop an engineered system of tooling and sensors, characterization techniques, and deployment subsystems for in-situ inspection of the several container types used for the storage of non-aluminum spent nuclear fuel (NASNF) in L Basin under the Augmented Monitoring and Condition Assessment Program (AMCAP). Inspecting the containers to provide information on their structural condition helps ensure the safe handling and storage of the NASNF containers pending final disposition. This report describes the work performed in the initial two phases of this developmental work, namely the bench scale and proof-of-principle (POP) scale, which focus on sensor selection and the tooling design and fabrication for two remote non-destructive examination (NDE) methods. These methods include visual testing (VT) for a visual examination of the container surfaces and ultrasonic testing (UT) for a n examination to characterize container wall material thickness and flaws.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Updated Estimate of Tritium Permeation from TPBAR Disposal Containers in ILV (U)

A tritium source term analysis was performed for TPBAR disposal in the E-Area Intermediate Level Vaults for the E-Area Low-Level Waste Facility Performance Assessment (PA). This analysis is based on an earlier source term analysis which treated the bulk oft he tritium residual as tightly bound by the TPBAR getter material, with only a small fraction existing as tritiated moisture in the lithium aluminate ceramic pellets. Together with atmospheric moisture trapped in the free volume, the tritiated water vapor is assumed to corrode steel surfaces inside the disposal container, covering them with a magnetite film while generating hydrogen. The carbon steel walls of the disposal container are permeable to hydrogen, providing a path way for tritium to escape containment. The rate of hydrogen generation is assumed to be limited by the rate of corrosion, which is assumed to be governed by parabolic reaction kinetics obtained from the literature. This relies on the further assumption that the water vapor consumed by the corrosion reaction is continually replaced by moisture from the lithium aluminate pellets until all of that moisture is gone. In addition to tritium permeation, the analysis also includes a slow leak through the disposal container walls at the maximum allowable leak rate, 1 x 1CH standard cm3/s. Results were obtained for four different combinations of internal and container wall temperatures, established in an earlier thermal analysis that considered two different vault loadings and two different TPBAR activity levels. Instantaneous release rates for these four cases are plotted in Figure ES-1 below

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗