Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “connected components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Electrically Connecting to Pressure Vessels

Resilient conductive disk eliminates need for holes in vessel walls. Grounding disk made from wire and solder and sandwiched between electrical-component support and pressure-vessel wall. Emplaced in component support, disk squeezed to 66 percent of its thickness. Disk conforms to surfaces of support and vessel wall when support attached to wall with adhesive. Disk thus forms reliable electrical contact from support (and its electrical component) to wall.

Rossi, P. J.↗
NASA NTRS1995

On automating domain connectivity for overset grids

An alternative method for domain connectivity among systems of overset grids is presented. Reference uniform Cartesian systems of points are used to achieve highly efficient domain connectivity, and form the basis for a future fully automated system. The Cartesian systems are used to approximate body surfaces and to map the computational space of component grids. By exploiting the characteristics of Cartesian systems, Chimera type hole-cutting and identification of donor elements for intergrid boundary points can be carried out very efficiently. The method is tested for a range of geometrically complex multiple-body overset grid systems. A dynamic hole expansion/contraction algorithm is also implemented to obtain optimum domain connectivity; however, it is tested only for geometry of generic shapes.

Chiu, Ing-Tsau↗
NASA NTRS2005

Design and Fabrication of the ISTAR Direct-Connect Combustor Experiment at the NASA Hypersonic Tunnel Facility

The Integrated Systems Test of an Airbreathing Rocket (ISTAR) project was a flight demonstration project initiated to advance the state of the art in Rocket Based Combined Cycle (RBCC) propulsion development. The primary objective of the ISTAR project was to develop a reusable air breathing vehicle and enabling technologies. This concept incorporated a RBCC propulsion system to enable the vehicle to be air dropped at Mach 0.7 and accelerated up to Mach 7 flight culminating in a demonstration of hydrocarbon scramjet operation. A series of component experiments was planned to reduce the level of risk and to advance the technology base. This paper summarizes the status of a full scale direct connect combustor experiment with heated endothermic hydrocarbon fuels. This is the first use of the NASA GRC Hypersonic Tunnel facility to support a direct-connect test. The technical and mechanical challenges involved with adapting this facility, previously used only in the free-jet configuration, for use in direct connect mode will be also described.

Lee, Jin-Ho↗
NASA NTRS2013

ESD Test Apparatus for Soldering Irons

ESDA (Electrostatic Discharge Association) ESD STM 13.1-2000 requires frequent testing of the voltage leakage from the tip of a soldering iron and the resistance from the tip of the soldering iron to the common point ground. Without this test apparatus, the process is time-consuming and requires several wires, alligator clips, or test probes, as well as additional equipment. Soldering iron tips must be tested for electrostatic discharge risks frequently, and this typically takes a lot of time in setup and testing. This device enables the operator to execute the full test in one minute or less. This innovation is a simple apparatus that plugs into a digital multimeter (DMM) and the Common Point Ground (CPG) reference. It enables the user to perform two of the electrostatic discharge tests required in ESD STM 13.1-2000. The device consists of a small black box with two prongs sticking out of one end, two inputs on the opposite end (one of the inputs is used to connect the reference CPG to the DMM), and a metal tab on one side. Inside the box are wires, several washers of various materials, and assembly hardware (nuts and screws/bolts). The device is a passive electronic component that is plugged into a DMM. The operator sets the DMM to read voltage. The operator places the heated tip of the soldering iron onto the metal tab with a small amount of solder to ensure a complete connection. The voltage is read and recorded. The operator switches the DMM to read resistance. The operator places the heated tip of the soldering iron onto the metal tab with a small amount of solder to ensure a complete connection. The resistance is recorded. If the recorded voltage and resistance are below a number stated in ESDA ESD STM 13.1-2000, the test is considered to pass. The device includes all the necessary wiring internal to its body so the operator does not need to do any independent wiring, except for grounding. It uses a stack of high-thermal-resistance washers to minimize the heat transfer from the soldering iron to the wiring used to measure the resistance and voltages. This minimizes thermal error. The device allows very rapid execution of a test that is performed frequently.

Sancho, Jose↗
NASA NTRS2010

Optical Structural Health Monitoring Device

This non-destructive, optical fatigue detection and monitoring system relies on a small and unobtrusive light-scattering sensor that is installed on a component at the beginning of its life in order to periodically scan the component in situ. The method involves using a laser beam to scan the surface of the monitored component. The device scans a laser spot over a metal surface to which it is attached. As the laser beam scans the surface, disruptions in the surface cause increases in scattered light intensity. As the disruptions in the surface grow, they will cause the light to scatter more. Over time, the scattering intensities over the scanned line can be compared to detect changes in the metal surface to find cracks, crack precursors, or corrosion. This periodic monitoring of the surface can be used to indicate the degree of fatigue damage on a component and allow one to predict the remaining life and/or incipient mechanical failure of the monitored component. This wireless, compact device can operate for long periods under its own battery power and could one day use harvested power. The prototype device uses the popular open-source TinyOS operating system on an off-the-shelf Mica2 sensor mote, which allows wireless command and control through dynamically reconfigurable multi-node sensor networks. The small size and long life of this device could make it possible for the nodes to be installed and left in place over the course of years, and with wireless communication, data can be extracted from the nodes by operators without physical access to the devices. While a prototype has been demonstrated at the time of this reporting, further work is required in the system s development to take this technology into the field, especially to improve its power management and ruggedness. It should be possible to reduce the size and sensitivity as well. Establishment of better prognostic methods based on these data is also needed. The increase of surface roughness with fatigue is closely connected to the microstructure of the metal, and ongoing research is seeking to connect this observed evidence of the fatigue state with microstructural theories of fatigue evolution to allow more accurate prognosis of remaining component life. Plans are also being discussed for flight testing, perhaps on NASA s SOFIA platform.

Buckner, Benjamin D.↗
NASA NTRS1977

A region of intense plasma wave turbulence on auroral field lines

Plasma wave measurements from the Hawkeye 1 and Imp 6 satellites show that a region of intense plasma wave turbulence occurs on high-latitude auroral field lines at altitudes ranging from a few thousand kilometers in the ionosphere to greater than 40 R-E in the distant magnetotail. Two distinct components are evident in the spectrum of this turbulence: (1) an intense quasi-electrostatic component called broadband electrostatic noise and (2) a weak whistler mode electromagnetic component called magnetic noise bursts. It is suggested that the plasma wave turbulence occurs on magnetic field lines which connect with regions of intense inverted V electron precipitation at low altitudes and with regions of intense earthward plasma flow in the distant magnetotail.

Gurnett, D. A.↗
NASA NTRS1980

IUE spectra of a flare in the RS Canum Venaticorum-type system UX Arietis

IUE spectra of UX Ari obtained during the large flare of 1979 January 1 exhibit chromospheric and transition-region emission-line fluxes about 2.5 and 5.5 times brighter than quiescent fluxes, respectively, and up to 1400 times brighter than the quiet sun. A high-dispersion spectrum of the 2000-3000 A region exhibits enhanced Fe II emission, which is probably associated mainly with the K0 IV star, and enhanced Mg II emission with asymmetric wings extending to +475 km/s. These line wings are interpreted as evidence for mass flow from the K0 IV star to the G5 V star. A speculative scenario of major long-lived RS CVn flares is proposed in which the component stars have very large corotating flux tubes, which occasionally interact. Magnetic reconnection results in flux tubes that temporarily connect the two stars.

Simon, T.↗
NASA NTRS1989

Population properties of AGN in the soft X-ray band

Maximum likehood analysis can be used to separate the intrinsic dispersion of spectral index from the measuring errors for X-ray observed samples of active galactic nuclei (AGN). A finite sigma tends to introduce selection biases, compels the use of large samples in searches for intrinsic properties, and can mask quite substantial trends in X-ray spectral index with other source properties. The property which appears to affect the mean spectral index is the relative strength of radio emission. The connection between radio and X-ray luminosity is discussed. Observed trends to flatter AGN X-ray spectral components with higher energy may be important in evaluating the composite spectrum of AGN contributing to the cosmic X-ray background.

Worrall, D. M.↗
NASA NTRS2005

Releasable Locking Mechanisms

In the aerospace field spacecraft components are held together by separation systems until a specific time when they must be separated or deployed. Customarily a threaded joining bolt engages one of the components to be joined, and a threaded nut is placed on that bolt against the other component so they can be drawn together by a releasable locking assembly. The releasable locking assembly herein includes a plunger having one end coupled to one end of a plunger bolt. The other end is flanged to abut and compress a coil spring when the plunger is advanced toward the interface plane between the two components. When the plunger is so advanced toward the interface plane, the end of the plunger bolt can be connected to the joining bolt. Thus during retraction the joining bolt is drawn to one side of the interface plane by the force of the expanding spring.

Rafiq Ahmed↗
NASA NTRS2005

Releasable locking mechanisms

In the aerospace field spacecraft components are held together by separation systems until a specific time when they must be separated or deployed. Customarily a threaded joining bolt engages one of the components to be joined, and a threaded nut is placed on that bolt against the other component so they can be drawn together by a releasable locking assembly. The releasable locking assembly herein includes a plunger having one end coupled to one end of a plunger bolt. The other end is flanged to abut and compress a coil spring when the plunger is advanced toward the interface plane between the two components. When the plunger is so advanced toward the interface plane, the end of the plunger bolt can be connected to the joining bolt. Thus during retraction the joining bolt is drawn to one side of the interface plane by the force of the expanding spring.

Ahmed, Rafiq↗
NASA NTRS2010

Simulation of Propellant Loading System Senior Design Implement in Computer Algorithm

Propellant loading from the Storage Tank to the External Tank is one of the very important and time consuming pre-launch ground operations for the launch vehicle. The propellant loading system is a complex integrated system involving many physical components such as the storage tank filled with cryogenic fluid at a very low temperature, the long pipe line connecting the storage tank with the external tank, the external tank along with the flare stack, and vent systems for releasing the excess fuel. Some of the very important parameters useful for design purpose are the prediction of pre-chill time, loading time, amount of fuel lost, the maximum pressure rise etc. The physics involved for mathematical modeling is quite complex due to the fact the process is unsteady, there is phase change as some of the fuel changes from liquid to gas state, then conjugate heat transfer in the pipe walls as well as between solid-to-fluid region. The simulation is very tedious and time consuming too. So overall, this is a complex system and the objective of the work is student's involvement and work in the parametric study and optimization of numerical modeling towards the design of such system. The students have to first become familiar and understand the physical process, the related mathematics and the numerical algorithm. The work involves exploring (i) improved algorithm to make the transient simulation computationally effective (reduced CPU time) and (ii) Parametric study to evaluate design parameters by changing the operational conditions

Bandyopadhyay, Alak↗
NASA NTRS2025

Inflatable Softgoods Design of an Articulating Crew Transfer Tunnel

Future NASA exploration plans call for lunar and Martian surface systems that form a base camp of multiple, pressurized elements. These discrete components, including habitats and pressurized rovers, require interoperability to meet the Artemis Accords and standard docking systems to physically connect elements together. A pressurized, articulating crew transfer tunnel can be used between a rover and habitat to enable shirt-sleeve transfer of crew and cargo, saving valuable crew time and resources. While transfer tunnels have been described in the past, this work details the design of a structural softgoods system that has compliant capability through a proposed docking range of motion. The inflatable softgoods design is based on a zero-hoop stress shape, known as a Taylor surface, that is stacked and truncated to form a unique and flexible configuration. Analytical, non-linear models have been developed to examine and predict the behavior of the structure, and material testing was used to determine the properties that were used in the model. Finally, a sub-scale test article was constructed using the baseline design and pressurized testing is in work. Additional full-scale testing is planned for future years to fully demonstrate the capability of the system.

Tunnel↗
NASA NTRSDate not supplied

Inflatable Softgoods Design of an Articulating Crew Transfer Tunnel

Future NASA exploration plans call for lunar and Martian surface systems that form a base camp of multiple, pressurized elements. These discrete components, including habitats and pressurized rovers, require interoperability to meet the Artemis Accords and standard docking systems to physically connect elements together. A pressurized, articulating crew transfer tunnel can be used between a rover and habitat to enable shirt-sleeve transfer of crew and cargo, saving valuable crew time and resources. While transfer tunnels have been described in the past, this work details the design of a structural softgoods system that has compliant capability through a proposed docking range of motion. The inflatable softgoods design is based on a zero-hoop stress shape, known as a Taylor surface, that is stacked and truncated to form a unique and flexible configuration. Analytical, non-linear models have been developed to examine and predict the behavior of the structure, and material testing was used to determine the properties that were used in the model. Finally, a sub-scale test article was constructed using the baseline design and pressurized testing is in work. Additional full-scale testing is planned for future years to fully demonstrate the capability of the system.

Tunnel↗
NASA NTRS1996

Residual life assessment of the SSME/ATD HPOTP turnaround duct (TAD)

This paper is concerned with the prediction of the low cycle thermal fatigue behavior of a component in a developmental (ATD) high pressure liquid oxygen turbopump (HPOTP) for the Space Shuttle Main Engine (SSME). This component is called the Turnaround Duct (TAD). The TAD is a complex single piece casting of MAR-M-247 material. Its function is to turn the hot turbine exhaust gas (1200 F hydrogen rich gas steam) such that it can exhaust radially out of the turbopump. In very simple terms, the TAD consists of two rings connected axially by 22 hollow airfoil shaped struts with the turning vanes placed at the top, middle, and bottom of each strut. The TAD is attached to the other components of the pump via bolts passing through 14 of the 22 struts. Of the remaining 8 struts, four are equally spaced (90 deg interval) and containing a cooling tube through which liquid hydrogen passes on its way to cool the shaft bearing assemblies. The remaining 4 struts are empty. One of the pump units in the certification test series was destructively examined after 22 test firings. Substantial axial cracking was found in two of the struts which contain cooling tubes. None of the other 20 struts showed any sign of internal cracking. This unusual low cycle thermal fatigue behavior within the two cooling tube struts is the focus of this study.

Gross, R. Steven↗
NASA NTRS2009

Expedition Earth and Beyond: Using NASA Data Resources and Integrated Educational Strategies to Promote Authentic Research in the Classroom

Teachers in today s classrooms are bound by state required skills, education standards, and high stakes testing. How can they gain skills and confidence to replace units or individual activities with curriculum that incorporates project and inquiry-based learning and promotes authentic research in the classroom? The key to promoting classroom authentic research experiences lies in educator professional development that is structured around teacher needs. The Expedition Earth and Beyond Program is a new geosciences program based at the NASA Johnson Space Center designed to engage, inspire and educate teachers and students in grades 5-14. The program promotes authentic research experiences for classrooms and uses strategies that will help NASA reach its education goals while still allowing educators to teach required standards. Teachers will have access to experts in terrestrial and planetary remote sensing and geoscience; this will enhance their use of content, structure, and relevant experiences to gain the confidence and skills they need to actively engage students in authentic research experiences. Integrated and powerful educational strategies are used to build skills and confidence in teachers. The strategies are as follows: 1) creating Standards-aligned, inquiry-based curricular resources as ready-to-use materials that can be modified by teachers to fit their unique classroom situation; 2) providing ongoing professional development opportunities that focus on active experiences using curricular materials, inquiry-based techniques and expanding content knowledge; 3) connecting science experts to classrooms to deepen content knowledge and provide relevance to classroom activities and real world applications; 4) facilitating students sharing research with their peers and scientists reinforcing their active participation and contributions to research. These components of the Expedition Earth and Beyond Education Program will be enhanced by providing exciting and diverse research opportunities that are inspired by views of Earth from space taken by astronauts on board the International Space Station. The interest and connection to viewing our home planet from space will inevitably spark questions that will drive students to pursue their research investigations, as well as forming a basis for comparisons to the exploration of other planetary bodies in our solar system.

Graffi, Paige Valderrama↗
NASA NTRS2003

Structure of the Outer Cusp and Sources of the Cusp Precipitation during Intervals of a Horizontal IMF

The cusp represents a place where the magnetosheath plasma can directly penetrate into the magnetosphere. Since the main transport processes are connected with merging of the interplanetary and magnetospheric field lines, the interplanetary magnetic field (IMF) Orientation plays a decisive role in the formation of the high-altitude cusp. The importance of the sign of the IMF Bz component for this process was suggested about 40 years ago and later it was documented by many experimental investigations. However, situations when IMF Bz is the major IMF component are rather rare. The structure of the cusp during periods of a small IMF BZ is generally unknown, probably due to the fully 3-D nature of the interaction. The present case study reveals the importance of horizontal IMF components on the global magnetospheric configuration as well as on small-scale processes at the cusp-magnetosheath interface. We have used simultaneous measurements of several spacecraft (ISTP program) operating in different regions of interplanetary space and two closely spaced satellites (INTERBALL-1/MAGION- 4) crossing the cusp-magnetosheath boundary to show the connection between the short- and large-scale phenomena. In the northern hemisphere, observations suggest a presence of two spots of cusp-like precipitation supplied by reconnection occurring simultaneously in both hemispheres. A source of this bifurcation is the positive IMF By component further enhanced by the field draping in the magnetosheath. This magnetic field component shifts the entry point far away from the local noon but in opposite sense in either hemisphere.

Nemecek, Z.↗
NASA NTRS1977

Development of a complex of activity in the solar corona

Using Skylab observations of soft solar X-rays, the development of a complex of activity in the solar corona during its whole lifetime of seven solar rotations is studied. The basic components of the activity complex were determined to be permanently interconnected through sets of magnetic field lines, which suggests similar connections also below the photosphere. The visibility of individual loops in these connections, however, was greatly variable and typically shorter than one day. Each brightening of a coronal loop in X-rays seems to be related to a variation in the photospheric magnetic field near its footprint.

Howard, R.↗
NASA NTRS1978

A flow study in radial inflow turbine scroll-nozzle assembly

The present analysis describes the flow behavior in the combined scroll-nozzle assembly of a radial inflow turbine. This model was chosen to provide a better understanding of the mutual interaction effects of these two components on the flow. The finite element method is used in the solution of the flow field in this multiply connected domain. The mass flow rates in the different nozzle channels is not presumed constant, but is determined from the solution.

Hamed, A.↗