Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compositeness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Enhanced lightning strike protection using vertically oriented carbon fiber melded with conventional carbon fiber-reinforced composite and its validation through damage analysis

Lightning strike protection (LSP) is one of the prime factors in aerospace and wind industries concerning safety, enhanced service life, and reduced downtime. To ensure better LSP, high electrical conductivity is required to dissipate the current, which is always a challenge for polymer composites due to the inherent insulating nature of the polymer matrix. Conventional carbon fiber-reinforced composites (CFRP) offer electrical conductivity in the planar direction while the vertical i.e. through-thickness conductivity still remains a challenge. Having been motivated by this fact, we have fabricated CFRP interleaved with vertically oriented CF (Z-fiber) for the lightning strike test (100 kA). A paint was applied to mimic the actual service condition of the composite laminates. We have prepared two Z-fiber composites: (a) Z-1 containing one Z-fiber layer on the top along with conventional CF layers and (b) Z-5 containing five interleaved Z-fiber layers and compared the properties with conventional CFRP (Z-0). Interestingly, even a single Z-fiber layer (Z-1) showed lower damage (visual damage diameter 22 mm) than Z-0 (visual damage diameter 26 mm). Z-5 displayed the lowest damage (visual damage diameter 16.7 mm), which was further confirmed by cross-sectional optical microscopy. Improved LSP was attributed to the higher through-thickness electrical conductivity in the case of Z-5 (9 times with respect to Z-0) reflecting a lower electrical anisotropy for Z-fiber composites. The residual mechanical property after the lightning test was analyzed through the flexural test, and the retention of flexural strength and modulus was 66% and 86%, respectively for Z-5 showing a significant improvement in comparison to Z-0 (>40% for both).

Saha, Subhabrata↗
DOE OSTI2024

Label-free single-vesicle based surface enhanced Raman spectroscopy: A robust approach for investigating the biomolecular composition of small extracellular vesicles

Small extracellular vesicles (sEVs) are cell-released vesicles ranging from 30-150nm in size. They have garnered increasing attention because of their potential for both the diagnosis and treatment of disease. The diversity of sEVs derives from their biological composition and cargo content. Currently, the isolation of sEV subpopulations is primarily based on bio-physical and affinity-based approaches. Since a standardized definition for sEV subpopulations is yet to be fully established, it is important to further investigate the correlation between the biomolecular composition of sEVs and their physical properties. In this study, we employed a platform combining single-vesicle surface-enhanced Raman spectroscopy (SERS) and machine learning to examine individual sEVs isolated by size-exclusion chromatography (SEC). The biomolecular composition of each vesicle examined was reflected by its corresponding SERS spectral features (biomolecular “fingerprints”), with their roots in the composition of their collective Raman-active bonds. Origins of the SERS spectral features were validated through a comparative analysis between SERS and mass spectrometry (MS). SERS fingerprinting of individual vesicles was effective in overcoming the challenges posed by EV population averaging, allowing for the possibility of analyzing the variations in biomolecular composition between the vesicles of similar and/or different sizes. Using this approach, we uncovered that each of the size-based fractions of sEVs contained particles with predominantly similar SERS spectral features. Indeed, more than 84% of the vesicles residing within a particular group were clearly distinguishable from that of the other EV sub-populations, despite some spectral variations within each sub-population. Our results suggest the possibility that size-based EV fractionation methods produce samples where similarly eluted sEVs are correlated with their respective biochemical contents, as reflected by their SERS spectra. Our findings therefore highlight the possibility that the biogenesis and respective biological functionalities of the various sEV fractions may be inherently different.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Topography and canopy cover influence soil organic carbon composition and distribution across a forested hillslope in the discontinuous permafrost zone

This dataset contains data used for the paper "Topography and canopy cover influence soil organic carbon composition and distribution across a forested hillslope in the discontinuous permafrost zone". The Related References field will be updated with a full citation when available. Topography and canopy cover influence ground temperature in warming permafrost landscapes, yet soil temperature heterogeneity introduced by meso-topographic slope positions, microtopographic differences in vegetation cover, and the subsequent impact of contrasting temperature conditions to soil organic carbon (SOC) dynamics are understudied. Buffering of permafrost-affected soils against warming air temperatures in boreal forests can reflect surface soil characteristics (e.g., thickness of organic material) as well as the degree and type of canopy cover (e.g., open cover vs closed cover). Both landscape and soil properties interact to determine meso- and micro-scale heterogeneity of ground warming. We sampled a hillslope catena transect in a discontinuous permafrost zone near Fairbanks, Alaska to test the small-scale (1 to 3 meter) impacts of slope position and cover type on soil organic matter composition. Mineral active layer samples were collected from backslope, low backslope, and footslope positions at depths spanning 19 to 60 cm. We examined soil mineralogical composition, soil moisture, total carbon and nitrogen content, and organic mat thickness in conjunction with an assessment of SOC composition using Fourier-transform ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS). Soils in the footslope position had a higher relative contribution of lignin-like compounds while backslope soils had more aliphatic and condensed aromatic compounds as determined by FT-ICR-MS. The effect of open versus closed tree canopy cover varied with slope position. On the backslope, we found higher oxidation of molecules under open cover compared with closed cover, indicating an effect of warmer soil temperature on decomposition. Little to no effect of canopy was observed for soils at the footslope position, which we attributed, in part, to the strong impact of soil moisture content in SOC dynamics in the water-gathering footslope position. The thin organic mat under open cover on the backslope position may have contributed to differences in soil temperature and thus SOC oxidation under open and closed canopy. Here, the thinner organic mat did not appear to buffer the underlying soil against warm season air temperatures and thus increased SOC decomposition as indicated by higher oxidation of SOC molecules and a lower contribution of simple molecules under open cover compared with the closed canopy sites. Our findings suggest that the role of canopy cover in SOC dynamics varies as a function of landscape position and soil properties, namely organic mat thickness and soil moisture. Condition-specific heterogeneity of SOC composition under open and closed canopy cover highlights the protective effect of canopy cover for soils on backslope positions. This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/Y1_fairbanks (DOI: 10.5281/zenodo.8071247).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Data from Stewart et al. 2026 "Organic Colloid Composition in Variable-Redox Porewaters within a Mountainous Floodplain"

Redox gradients, often driven by changes in sediment moisture levels in porous, heterogeneous groundwater systems, create dynamic conditions that may promote the production and transport of colloids within natural waters. While much research has focused on the inorganic composition of colloids, the organic composition remains less well understood. Organic matter (OM) in colloids may associate with minerals, complex metal ions, and serve as an electron donor for microbial respiration; therefore, its composition is of high interest. We examined the composition of porewater OM along a redox gradient in a riparian soil located along the Slate River in Crested Butte, Colorado, USA as a function of depth (90, 130, 200, and 350 cm below ground surface). All depths were oxic to suboxic, except 200 cm, where the products of iron and sulfate reduction were observed concomitant with an increase in dissolved and/or colloidal OM, pH, alkalinity, and conductivity. We investigated the composition of porewater using correlated scanning transmission X-ray microscopy and transmission electron microscopy. We observed a change in the OM chemistry from carboxylate-rich at the 200 cm depth (where it was also enmeshed with non-crystalline iron) to phenol- and substituted-aromatic-rich at other depths. Radiocarbon dating revealed carbon in porewater at 200 cm was younger than depths above and below. Soil porewater can flow down into the underlaying gravel bed during baseflow conditions, thus we speculate whether riparian porewater could transport iron- and carboxylate-rich organic colloids into surrounding surface waters through the gravel bed conduit. This data package includes geochemical data (.csv) as a function of depth from porewaters in OBJ1. Measurements included are pH, conductivity, TOC, Fe concentration, sulfate concentration, dissolved oxygen. Additionally radiocarbon dating age of carbon in samples is provided. Additionally, this dataset contains metadata files (.csv) describing the methods, file contents, and column headers.

alpine floodplain↗
DOE OSTI2022

Highly Recyclable Thermosets for Lightweight Composites: CRADA 517 [Abstract only]

Lightweight composites are of increasing need to enable reduced fuel usage, reduced carbon emissions and increased range in air and ground transportation. The superior weight savings of carbon fiber thermoset composites are impeded by material and production costs and the limited options available for composite repair and recycle. The materials recovery and recycling sector is currently overwhelmed by an abundance of low-value materials and limited market opportunities for downcycled content, rendering landfilling a more attractive alternative. Vitrimers represent a new paradigm for repairable and recyclable thermosets, but this relatively new technology will require development, including government investment, to reduce risks for its adoption by aerospace and automotive OEMs. The overall goal of the project is to create recyclable carbon fiber composites using vitrimer resins that are more energy efficient to produce and have improved properties over baseline technology. The targeted composites will retain their tensile strength after multiple recycling and reprocessing steps. In addition, monomer will be recoverable through depolymerization and re-usable carbon fibers will be retrieved.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Compositional Methods for Schrödinger's Equation with Application to Optimal Control

The evolution of the state of a quantum computer is governed by Schrödinger's equation. We introduce compositional methods, a way to increase the order of symmetric methods by replacing one timestep by multiple timesteps. We perform several numerical experiments, including a simulation of a two qubit CNOT gate, using compositional variants of Störmer-Verlet and the implicit midpoint rule. We observe that the compositional methods demonstrate greater computational efficiency than the base methods when the desired error tolerance is less than ~ 10 -4 to 10 -5 . We discuss the trade-offs of using each compositional method, as well as differences between using Störmer-Verlet or the implicit midpoint rule as the base integrator of the compositional methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Manufacturing Dissolvable Alloy Components using ShAPE: A Study on Solid Phase Processing of Mg-W Composites and WJ11 Alloys

Dissolvable alloys and composites are an emerging class of materials that demonstrate tailored sorptivity in corrosive environments. This work explored the viability of solid phase processing (SPP) techniques, namely the shear assisted processing and extrusion (ShAPETM) method, to manufacture dissolvable magnesium composites and alloys components such as rods and tubes. The study also determined the effects of material composition and manufacturing process conditions on material microstructures developed during SPP and the resulting performance of the components. Explicit properties of interest included ultimate tensile strength, ultimate compressive strength, and yield strength. The application fields of interest for dissolvable alloys were identified as oil-and-gas operations and biomedical implants. Accordingly, PNNL collaborated with industrial and academia partners, Fortek Industries, Houston and University of Pittsburgh, during the course of this project for material and ShAPE process development. PNNL determined the viability of the using ShAPE to process the custom-designed materials provided by the project partners. This was done by identifying process parameters such as tool rotation rate, tool plunge rate, and process cooling optimal for manufacturing components with consolidated microstructures. Subsequently, PNNL also performed microstructural characterization on unprocessed and processed samples and mechanical property testing. One of the major findings from this work is that ShAPE was able to manufacture dissolvable magnesium composite and alloy rods and tubes with consolidated homogeneous microstructures and minimal macroscale defects on component surfaces. It was observed that samples processed via ShAPE demonstrated an average grain size < 2 - 5 µm, which was markedly lower than that of the precursors with 8 – 13 µm grains. Results showed that the ShAPE synthesized dissolvable magnesium composite and alloy strength was on par with or better than those components that were manufactured using traditional manufacturing processes such as forging and extrusion. It is noteworthy that the ShAPE samples were made with considerably lower number of process steps.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing the link between aerosol mixing state, structure and composition and their optical properties: Ascension Island as a testbed for the South‐East Atlantic aerosol regimes

Forest and savanna fires are a major source of pollution over the globe. Such fire events emit to the atmosphere a considerable amount of “fluffy” fractal black looking particles that are often referred to as black carbon (BC) or soot aerosols. In fact, BC particles (aerosols) emitted from savanna and agricultural fires over the African continent play an important role in the region’s and the global climate. These fires occur each year between July and October, which is referred to as the biomass burning (BB) season and are considered among the globe's largest man-made emission sources of BC particles. However, during these fire events, not only BC particles are emitted, but also other types of particles and gases that can interact with each other to create new particles, generating a slew of particles often generally referred to as BB aerosols. Although the majority of the fire emissions occur inland in the sub-Saharan part of Africa, their effect reaches far beyond the continent due to the prevailing easterly winds, which transport those aerosols over the South-East Atlantic (SEA) ocean, off the west-coast of Africa. The reason why these particles are so important to the regional and global climate is that they absorb sunlight radiation, which overall warms the climate. However, the magnitude of this warming effect is highly uncertain and depends upon a multitude of aspects. Our overarching goal for this project was to better understand the changes in the aerosol properties as they transport from fire sources downstream toward the ocean and how this can eventually affect the earth's radiative budget in terms of warming or cooling. Following the above, our work here was focused on the investigation of the African BB aerosol plumes mixing state (mixing of BB aerosols and other aerosol types), composition and size distribution as they transport from the African continent towards the SEA ocean, and their link with some of the commonly measurable bulk optical properties such as mass absorption coefficient (MAC) and single scattering albedo (SSA). We utilized three field missions that were conducted over the SEA ocean between 2016 and 2018. Specifically, we used (1) ground-based measurements from the DOE ARM Mobile Facility (AMF1), which was deployed at Ascension Island (ASI) for the LASIC (Layered Atlantic Smoke Interactions with Clouds) campaign between June 2016 and October 2017, (2) airborne measurements from the UK CLARIFY (Clouds and Aerosol Radiative impacts and Forcing) campaign during Aug-Sep-2017, and (3) airborne measurements from the ORACLES (Observations of Aerosols above Clouds and their interactions) campaign during Aug-2017, and Sep-Oct-2018. The three campaigns cover a relatively large region, from the western African coast on the east towards Ascension Island in the middle of the SEA to the west. We used the data gathered by these campaigns to find how BB properties and composition change from near emission sources (the ORACLES campaign flights) downstream (the CLARIFY flights and the ground based LASIC measurements). We used particle trajectory following methodologies to connect the measurements from the different campaigns, which allowed us to follow a certain aerosol plume (airmass) from near-source towards Ascension Island. We found out that atmospheric aging processes governed by the UV light from the sun (photochemistry) and cloud processes (aqueous chemistry) govern the changes seen in the particle composition during the transport were more dominant in dictating aerosol composition than specific emission composition or source types. We assessed how aerosol optical properties change during the BB season and what are the main drivers of this change. We found that the enhanced ratio of BC to CO is well correlated with single scattering albedo (SSA) and mass absorption coefficient (MACBC), providing a simple way to estimate the aerosol optical characteristics in the south-eastern Atlantic Ocean. From the analysis of the location of BB, the primary source fuel, the water content in the fuel, combined with the mean cloud cover and precipitation in the transport areas of the BB plume, we conclude that the increase in BC/CO from June to August is likely to be caused by burning becoming more flaming (hot fires), and the decrease in BC/CO in September and October may be caused by smoldering (colder) fires. We found that aerosol hygroscopicity increases with decreasing altitude below 2km, and that enhanced BB hygroscopicity at lower altitudes is mainly due to a lower organic aerosol (OA) fraction, increased sulfate fraction, and greater hygroscopicity parameter of OA at lower altitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Development of Property Composition Models For RPP-WTP LAW Glasses (Final Report)

This report describes the development of property-composition models for low-activity waste (LAW) glasses for the River Protection Project Waste Treatment Plant (RPP-WTP) at the Hanford site. The RPP-WTP will separate Hanford tank wastes into LAW and high-level waste (HLW) streams and each stream will be vitrified separately. The development of LAW and HLW glass formulations for the RPP-WTP has been reported previously and is an ongoing activity. Acceptable formulations must meet a variety of processability, product quality, and waste loading requirements that are dictated either by the RPP-WTP contract or by the characteristics of the particular treatment processes that have been selected. These requirements amount to constraints on the acceptable ranges of certain glass properties. These properties are determined first and foremost by the composition of the glass or glass melt. Thus, while there is no direct way of controlling the glass properties of interest during production, there are simple and extremely effective methods of achieving the same result by instead controlling the glass composition. This basic principle is no different from that used to produce enormous volumes of commercial glass to meet exacting product specifications. An essential difference in waste vitrification, however, is that one of the raw materials (the waste itself) can be subject to considerable compositional uncertainty and variability. Thus, waste vitrification facilities and associated process control systems (of which, the operating envelope in glass formulation space is a key part) must, of course, be designed to be robust with respect to such variations. The determination of quantitative relationships between the glass properties that must be controlled and the glass composition can play an important role in the development of such facilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

HYBRID COMPOSITES VIA CO-EXTRUSION ADDITIVE MANUFACTURING-COMPRESSION MOLDING FOR PERFORMANCE OPTIMIZATION

The growing demand for hybrid polymer composites with multifunctional properties has led to the development of various hybridization techniques, such as multi-material compounding and controlled laminate stacking sequence. In this study, a novel hybrid manufacturing approach was used by integrating a multiplexing extrusion system (MExS) based on additive manufacturing with subsequent compression molding process. This technique enabled the co-extrusion of different materials during the additive manufacturing process to fabricate composites with tailored performance. The developed hybrid composite featured a skin layer of glass fiberreinforced polycarbonate (PC/GF) encapsulating a carbon fiber-reinforced acrylonitrile butadiene styrene (CF/ABS) core. The structure was engineered to promote improved thermal and impact resistance at the surface, supported by a stiff core for enhanced overall mechanical integrity. Mechanical, thermal and morphological properties of the hybrid composites were investigated to understand trade-offs in performance compared to a single-material system. The results demonstrate that this approach enables the production of multifunctional composites suitable for applications such as automotive body panels and protective housings, where a balance of weight, mechanical strength, and thermal performance is essential.

Wasti, Sanjita [ORNL]↗
DOE OSTI2020

Finite Element Modeling of the Fiber-Matrix Interface in Polymer Composites

Polymer composites are used in numerous industries due to their high specific strength and high specific stiffness. Composites have markedly different properties than both the reinforcement and the matrix. Of the several factors that govern the final properties of the composite, the interface is an important factor that influences the stress transfer between the fiber and matrix. The present study is an effort to characterize and model the fiber-matrix interface in polymer matrix composites. Finite element models were developed to study the interfacial behavior during pull-out of a single fiber in continuous fiber-reinforced polymer composites. A three-dimensional (3D) unit-cell cohesive damage model (CDM) for the fiber/matrix interface debonding was employed to investigate the effect of interface/sizing coverage on the fiber. Furthermore, a two-dimensional (2D) axisymmetric model was used to (a) analyze the sensitivity of interface stiffness, interface strength, friction coefficient, and fiber length via a parametric study; and (b) study the shear stress distribution across the fiber-interface-matrix zone. It was determined that the force required to debond a single fiber from the matrix is three times higher if there is adequate distribution of the sizing on the fiber. The parametric study indicated that cohesive strength was the most influential factor in debonding. Moreover, the stress distribution model showed the debonding mechanism of the interface. It was observed that the interface debonded first from the matrix and remained in contact with the fiber even when the fiber was completely pulled out.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Organic Solvent Free Process to Fabricate High Performance Silicon/Graphite Composite Anode

Cycling stability is a key challenge for application of silicon (Si)-based composite anodes as the severe volume fluctuation of Si readily leads to fast capacity fading. The binder is a crucial component of the composite electrodes. Although only occupying a small amount of the total composite mass, the binder has major impact on the long-term electrochemical performance of Si-based anodes. In recent years, water-based binders including styrene-butadiene rubber (SBR) and carboxymethyl cellulose (CMC) have attracted wide research interest as eco-friendly and low-cost alternatives for the conventional poly(vinylidene difluoride) (PVDF) binder in Si anodes. In this study, Si-based composite anodes are fabricated by simple solid mixing of the active materials with subsequent addition of SBR and CMC binders. This approach bypasses the use of toxic and expansive organic solvents. The factors of binder, silicon, and graphite materials have been systematically investigated. It is found that the retained capacities of the anodes are more than 440 mAh/g after 400 cycles. These results indicate that organic solvent free process is a facile strategy for producing high performance silicon/graphite composite anodes.

Fang, Chen (ORCID:0000000321011991)↗
DOE OSTI2023

Hydrophobic, Thermal Shock-and-Corrosion-Resistant XSBR Latex-Modified Lightweight Class G Cement Composites in Geothermal Well Energy Storage Systems

Energy losses can be significantly reduced if thermally insulating cement is used for energy storage and recovery. The thermal conductivity (TC) of the currently used cement is between 1 and 1.2 W/mK. In this study we assessed the ability of polystyrene (PS)–polybutadiene (PB)–polyacrylic acid (PAA) terpolymer (cross-linked styrene–butadiene rubber, XSBR) latex to improve thermal insulating properties and thermal shock (TS) resistance of class G ordinary Portland cement (OPC) and fly ash cenosphere (FCSs) composites in the temperature range of 100–175 °C. The composites autoclaved at 100 °C were subjected to three cycles, one cycle: 175 °C heat → 25 °C water quenching). In hydrothermal and thermal (TS) environments at elevated temperatures in cement slurries the XSBR latex formed acrylic calcium complexes through acid–base reactions, and the number of such complexes increased at higher temperatures due to the XSBR degradation with formation of additional acrylic groups. As a result, these complexes offered the following five advanced properties to the OPC-based composites: (1) enhanced hydrophobicity; (2) decreased water-fillable porosity; (3) reduced TC for water-saturated composites; (4) minimized loss of compressive strength, Young’s modulus, and compressive fracture toughness after TS; and (5) abated pozzolanic activity of FCSs, which allowed FCSs to persist as thermal insulators under strongly alkaline conditions of cement slurries. Additionally, XSBR-modified slurries possessed improved workability and decreased slurry density due to the air-entraining effect of latex, which resulted in further improvement of thermal insulation performance of the modified composites.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries

Realizing rechargeable cells with practical energy and power density requires electrodes with high active material loading, a remaining challenge for solid-state batteries. Here, we present a new strategy based on ionogel-derived solid-state electrolytes (SSEs) to form composite electrodes that enable high active material loading (>10 mg/cm 2 , ~9 mA/cm 2 at 1C) in a scalable approach for fabricating Li-ion cells. By tuning the precursor and active materials composition incorporated into the composite lithium titanate electrodes, we achieve near-theoretical capacity utilization at C/5 rates and cells capable of stable cycling at 5.85 mA/cm 2 (11.70 A/g) with over 99% average Coulombic efficiency at room temperature. Finally, we demonstrate a complete polymeric solid-state cell with a composite anode and a composite lithium iron phosphate cathode with ionogel SSEs, which is capable of stable cycling at a 1C rate.

25 ENERGY STORAGE↗
DOE OSTI2025

Bacterial-Retted Hemp Fiber/PLA Composites

The push for sustainability in all facets of manufacturing has led to an increased interest in biomass as an alternative to non-renewable materials. Hemp bast fiber mats were produced from a bacterial retting process, named BFM, as the fiber reinforcement. The objective of this study was to evaluate the feasibility of laminating BFM with polylactic acid (PLA) for a composite panel product. Since both BFM and PLA are biodegradable, the resulting BFM-PLA composites will be 100% biodegradable. PLA pallets were processed into thin polymer sheets which served as the matrix. The BFM and PLA plates were laminated in five layers and compression-molded into composite panels. Experiments were conducted on the three BFM-to-PLA ratios (35/65, 45/55, and 50/50). Mechanical properties (tensile and bending properties) and physical properties (thickness swell and water absorption) were tested and compared to the currently commercial sheet molding compound (SMC) from fiber glass. The thermal behavior of the BFM/PLA composites was characterized using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). The developed BFM/PLA composite product is a sustainable alternative to existing synthetical fiber-reinforced polymer (FRP) that is biodegradable in landfill at the end of life.

Smith, Lee M. (ORCID:0000000264390357)↗
DOE OSTI2020

Executing a composite VLIW instruction having a scalar atom that indicates an iteration of execution

A processor core includes a storage device which stores a composite very large instruction word (VLIW) instruction, an instruction unit which obtains the composite VLIW instruction from the storage device and decodes the composite VLIW instruction to determine an operation to perform, and a composite VLIW instruction execution unit which executes the decoded composite VLIW instruction to perform the operation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Determining the ballistic threshold velocity for a composite structure using multiple failure models

A composite structure, such as a laminated composite panel, for example, comprises one or more layers or “plies” embedded in a matrix material or otherwise fixed together in an arrangement, commonly referred to as a “stack up.” Each material in the structure has a corresponding material failure model (MFM) defining the physical characteristics of that material. A ballistic threshold velocity computing device obtains the MFMs for each material in the composite structure, generates a predicted ballistic velocity threshold velocity for each MFM, and then generates a parametric model to compute a composite ballistic velocity threshold velocity for the composite structure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Predictive Model for Offgas Composition in Waste Glass Melters - Spring 2021 SULI General Audience Abstract

Approximately 56 million gallons of nuclear waste are currently stored in 177 underground storage tanks at the Hanford site in Washington state. A portion of the tank waste is targeted for immobilization by converting the nuclear waste to borosilicate glass through a process called vitrification. During vitrification, emissions are produced in addition to the intended glass product. These emissions, contained in a volume above the molten glass called the plenum, are composed of water vapor, air components, aerosols, particulates, and other gaseous species that result from evaporation, reactions, and air influx. The formation of these gasses causes the surface of the glass to foam. To reduce foaming, sucrose is added to the waste stream before the conversion to glass. Sucrose also reduces the formation of hazardous gasses in the plenum including nitrous oxides, NOx, and carboxides, COx. However, if excess sucrose is present, the reactions that produce the gasses in the plenum will be incomplete, and increased levels of NOx and COx can be observed. The Waste Treatment and Immobilization Plant at the Hanford site is equipped with the technology to treat the plenum emissions. Though many tests have been run to determine the presence of particulates in the plenum emissions, there is does not exist an established method to confidently predict the composition of the gaseous species in the plenum prior to treatment without physical testing. A model was created in the process modeling software Aspen Plus to predict the composition of NOx and COx in the plenum. The model employs a constant stirred tank reactor and user-defined reaction chemistry to determine the plenum composition. To verify the model, the offgas predicted by the model were compared to available offgas data for ten different feed compositions. It is demonstrated that the developed Aspen Plus model is capable of predicting the composition of NOx and COx in the plenum.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗