Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “component model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

V-SUIT Model Validation Using PLSS 1.0 Test Results

The dynamic portable life support system (PLSS) simulation software Virtual Space Suit (V-SUIT) has been under development at the Technische Universitat Munchen since 2011 as a spin-off from the Virtual Habitat (V-HAB) project. The MATLAB(trademark)-based V-SUIT simulates space suit portable life support systems and their interaction with a detailed and also dynamic human model, as well as the dynamic external environment of a space suit moving on a planetary surface. To demonstrate the feasibility of a large, system level simulation like V-SUIT, a model of NASA's PLSS 1.0 prototype was created. This prototype was run through an extensive series of tests in 2011. Since the test setup was heavily instrumented, it produced a wealth of data making it ideal for model validation. The implemented model includes all components of the PLSS in both the ventilation and thermal loops. The major components are modeled in greater detail, while smaller and ancillary components are low fidelity black box models. The major components include the Rapid Cycle Amine (RCA) CO2 removal system, the Primary and Secondary Oxygen Assembly (POS/SOA), the Pressure Garment System Volume Simulator (PGSVS), the Human Metabolic Simulator (HMS), the heat exchanger between the ventilation and thermal loops, the Space Suit Water Membrane Evaporator (SWME) and finally the Liquid Cooling Garment Simulator (LCGS). Using the created model, dynamic simulations were performed using same test points also used during PLSS 1.0 testing. The results of the simulation were then compared to the test data with special focus on absolute values during the steady state phases and dynamic behavior during the transition between test points. Quantified simulation results are presented that demonstrate which areas of the V-SUIT model are in need of further refinement and those that are sufficiently close to the test results. Finally, lessons learned from the modelling and validation process are given in combination with implications for the future development of other PLSS models in V-SUIT.

Olthoff, Claas↗
NASA NTRS1993

Santa Barbara microwave backscattering model for woodlands

The Santa Barbara microwave backscattering model for woodland vegetation with discontinuous tree canopies is described, with an emphasis on the construction of the model from probability-weighted sub-components. The modelling approach is to treat individual tree crowns as scatterers and attenuators, using the probabilities of scattering and attenuation to compute total backscatter. Four major model components are defined: surface backscattering, crown volume scattering, multi-path interactions between crown and ground, and double-bounce trunk-ground interactions. Each component is divided into subcomponents having distinct scattering and attenuation paths. The scattering of each subcomponent is computed and weighted by the probability of its occurrence. Total backscatter from a simulated woodland stand is computed by incoherent summation of the components. Recent revisions to the model have modified the subcomponent definitions and improved the probability formulation.

Wang, Y.↗
NASA NTRSDate not supplied

A Principal-Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Shortwave and Longwave Satellite Sensors and Its Applications

The radiative transfer model (RTM) or forward model is an essential component in satellite remote sensing. For modern hyperspectral remote sensors, fast and accurate RTMs are needed due to a large number of spectral dimensions and high spatial resolutions. We will describe a Principal Component-based radiative transfer model (PCRTM) which can simulate the top-of-atmosphere (TOA) radiance or reflectance spectra 250 nm to 2000 micrometers quickly and accurately. The PCRTM has been demonstrated to be extremely accurate, compared to the line-by-line RTM benchmarks, and the former is several orders more computationally efficient than the latter. We will demonstrate how the PCRTM and the associated inversion algorithms are used to infer atmospheric temperature, moisture, and trace gas profiles, as well as cloud and surface properties from hyperspectral IR sounders such as Atomspheric Infrared Souder (AIRS) and Cross-track Infrared Sounder (CrIS). High-quality climate records for a 20-year duration have been derived from these IR hyperspectral data. Finally, we will show some examples of using PCRTM to retrieve cloud properties from Earth Surface Mineral Dust Source Investigation (EMIT) and its applicability of PCRTM to future missions such as the CLARREO (Climate Absolute Radiance and Refractivity Observatory) Pathfinder (CPF) CPF and the Surface Biology and Geology (SBG).

Xu Liu↗
NASA NTRS1989

A global climatology of albedo, roughness length and stomatal resistance for atmospheric general circulation models as represented by the Simple Biosphere Model (SiB)

Components of the Simple Biosphere Model (SiB) of Sellers et al. (1986) were used to generate global monthly fields of surface albedo (0.4-4.0 microns), roughness length and minimum surface (stomatal) resistance. SiB consists of three submodels which describe the roles of radiative transfer, turbulent transfer and surface resistance in determining the energy balance of the vegetated land surface. These three submodels were detached from SiB and used on the SiB parameter set (total and green leaf area index, leaf angle orientation, canopy dimensions, etc.) to calculate global monthly fields of albedo, roughness length and minimum stomatal resistance at 1 x 1 deg resolution. Time series of various parameters are also displayed for each vegetation type for specified grid points. The SiB results compare reasonably well with appropriate measurements obtained from the literature and have the additional merit of being mutually consistent; the three submodels use many common parameters, which ensures that, for each grid area, the calculated surface properties are closely interrelated as is the case in nature. The derived fields provide a check on the operation of the submodels and the correctness of the parameter set. They can also be used as prescribed fields for GCMs that do not have biophysically based land surface parameterizations.

Dorman, J. L.↗
NASA NTRS1992

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method is proposed in this research. The first stage of this methodology, called COmponent Mode Projection and Assembly model REduction (COMPARE) method, involves the generations of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Lee, Allan Y.↗
NASA NTRS1993

A component modes projection and assembly model reduction methodology for articulated, multi-flexible body structures

A two-stage model reduction methodology, combining the classical Component Mode Synthesis (CMS) method and the newly developed Enhanced Projection and Assembly (EP&A) method, is proposed in this research. The first stage of this methodology, called the COmponent Modes Projection and Assembly model REduction (COMPARE) method, involves the generation of CMS mode sets, such as the MacNeal-Rubin mode sets. These mode sets are then used to reduce the order of each component model in the Rayleigh-Ritz sense. The resultant component models are then combined to generate reduced-order system models at various system configurations. A composite mode set which retains important system modes at all system configurations is then selected from these reduced-order system models. In the second stage, the EP&A model reduction method is employed to reduce further the order of the system model generated in the first stage. The effectiveness of the COMPARE methodology has been successfully demonstrated on a high-order, finite-element model of the cruise-configured Galileo spacecraft.

Lee, Allan Y.↗
NASA NTRS1985

Composite Loads Spectra for Select Space Propulsion Structural Components: Probabilistic Load Model Development

This effort is in support of the development of the expert system of computer codes to predict the loads on select structural components of a space propulsion engine. The development will be based primarily on the space shuttle main engine (SSME) test data base. Because of random variations of the many different sources of the loadings on the selected structural components and transients, a probabilistic approach to the problems was adopted. The goal of this task is to characterize all of the individual sources of loads at critical structural locations, such as the turbine blades, the transfer ducts, and liquid oxygen posts, using state-of-the-art probabilistic methods with varying levels of sophistication. The second phase of this work is the development of a composite load model based on a probabilistic synthesis of the individual load model previously developed. This model will be based on the stochastic combination of the load variables and not on the physical process for the combination of the individual loads to the composite load seen by the selected structural components.

Kurth, R.↗
NASA NTRS2001

A Component-based Programming Model for Composite, Distributed Applications

The nature of scientific programming is evolving to larger, composite applications that are composed of smaller element applications. These composite applications are more frequently being targeted for distributed, heterogeneous networks of computers. They are most likely programmed by a group of developers. Software component technology and computational frameworks are being proposed and developed to meet the programming requirements of these new applications. Historically, programming systems have had a hard time being accepted by the scientific programming community. In this paper, a programming model is outlined that attempts to organize the software component concepts and fundamental programming entities into programming abstractions that will be better understood by the application developers. The programming model is designed to support computational frameworks that manage many of the tedious programming details, but also that allow sufficient programmer control to design an accurate, high-performance application.

Eidson, Thomas M.↗
NASA NTRS2004

Airframe Noise Sub-Component Definition and Model

Both in-house, and jointly with NASA under the Advanced Subsonic Transport (AST) program, Boeing Commerical Aircraft Company (BCA) had begun work on systematically identifying specific components of noise responsible for total airframe noise generation and applying the knowledge gained towards the creation of a model for airframe noise prediction. This report documents the continuation of the collection of database from model-scale and full-scale airframe noise measurements to compliment the earlier existing databases, the development of the subcomponent models and the generation of a new empirical prediction code. The airframe subcomponent data includes measurements from aircraft ranging in size from a Boeing 737 to aircraft larger than a Boeing 747 aircraft. These results provide the continuity to evaluate the technology developed under the AST program consistent with the guidelines set forth in NASA CR-198298.

Golub, Robert A.↗
NASA NTRS1986

Computational models for the analysis/design of hypersonic scramjet components. I - Combustor and nozzle models

An overview of computational models developed for the complete, design-oriented analysis of a scramjet propulsion system is provided. The modular approach taken involves the use of different PNS models to analyze the individual propulsion system components. The external compression and internal inlet flowfields are analyzed by the SCRAMP and SCRINT components discussed in Part II of this paper. The combustor is analyzed by the SCORCH code which is based upon SPLITP PNS pressure-split methodology formulated by Dash and Sinha. The nozzle is analyzed by the SCHNOZ code which is based upon SCIPVIS PNS shock-capturing methodology formulated by Dash and Wolf. The current status of these models, previous developments leading to this status, and, progress towards future hybrid and 3D versions are discussed in this paper.

Dash, S. M.↗
NASA NTRS1987

A spectral study of the persistent X-ray flux from 4 U/MXB 1636-53

A spectral analysis of the persistent X-ray flux from the X-ray burst source 4 U/MXB 1636-53, which was continuously observed with EXOSAT for about 25 h in May, 1984, is presented. It is found that no standard one-component spectral model provides an acceptable representation of all the data. However, almost all 'complex one-component' and 'two-component' models do accurately fit the data. A blackbody plus a 'multicolor' disk spectrum does not fit these data. In addition, some 'two-component' spectral models can be fitted to the data with more than one set of different parameter values. Based on these results, it is suggested that the various physical scenarios that have been proposed to interpret 'two-component' spectra of low-mass X-ray binaries may be based on mathematical parameterizations which may not provide unique representations of the data. If this is the case, the reported 'two-component' mathematical fits may not have any true physical significance.

Vacca, W. D.↗
NASA NTRS2021

The Role of Complex Ionized Absorber in the Soft X-ray Spectra of Intermediate Polars

In magnetic Cataclysmic Variables (mCVs), X-ray radiation originates from the shock heated multi-temperature plasma in the post-shock region near the white dwarf surface. These X-rays are modified by a complex distribution of absorbers in the pre-shock region. The presence of photo-ionized lines and warm absorber features in the soft X-ray spectra of these mCVs suggests that these absorbers are ionized. We developed the ionized complex absorber model zxipab, which is represented by a power-law distribution of ionized absorbers in the pre-shock ow. Using the ionized absorber model zxipab along with a cooling ow model and a reflection component, we model the broadband Chandra/HETG and NuSTAR spectra of two IPs: NY Lup and V1223 Sgr. We nd that this model describes well many of the H and He like emission lines from medium Z elements, which arises from the collisionally excited plasma. However the model fails to account for some of the He like triplets from medium Z elements, which points towards its photo-ionization origin. We do not find a compelling evidence for a blackbody component to model the soft excess seen in the residuals of the Chandra/HETG spectra, which could be due to the uncertainties in estimation of the interstellar absorption of these sources using Chandra/HETG data and/or excess fluxes seen in some photo-ionized emission lines which are not accounted by the cooling ow model. We describe the implications of this model with respect to the geometry of the pre-shock region in these two IPs

Nazma Islam Syeda↗
NASA NTRSDate not supplied

Principal Component-Based Radiative Transfer Model (PCRTM) for Hyperspectral Remote Sensors for UV, VVIS, NIR, IR, and FIR Spectral Regions

Fast and accurate radiative transfer models are needed to efficiently process satellite hyperspectral remote sensors. We have developed a Principal Component-based radiative transfer model (PCRTM) which can simulate TOA radiance or reflectance spectra in the cloudy atmosphere for far IR, IR, NIR, VIS, and UV spectral regions quickly and accurately. Multi-scattering of multiple layers of clouds/aerosols is included in the model. Polarization components can also be calculated. The computation speed is 3 to 4 orders of magnitude faster than MODTRAN5, LBLRTM, and VLIDORT. The PCRTM calculated radiance spectra agree with reference RTM calculated radiance spectra very well (0.03 K in IR and 0.05% in solar). Comparisons of the PCRTM model calculations with observed AIRS, CrIS, IASI, NAST-I, and SCIAMACHY data will be presented. The solar-PCRTM has been developed for CLARREO PathFinder (CPF) and has been extensively used for CPF science algorithms. The PCRTM can also be used for many current and future NASA future missions such as EMIT, SBG, TEMPO, and PACE.

pcrtm↗
NASA NTRS1990

Selection of component modes

Structural dynamic models of complex spacecraft are often assembled from a number of component models. In this paper, three methods for reducing the order of these component models are presented by selecting 'important' fixed interface component modes. These methods are applied to two component structures of the Space Station Freedom: a photovoltaic (PV) array and a solar dynamic collector. The reduced order models of these components retain a small fraction of the number of modes in the original models while accurately representing a set of outputs chosen by the user.

Blelloch, Paul A.↗
NASA NTRS1991

Functional models of power electronic components for system studies

A novel approach to model power electronic circuits has been developed to facilitate simulation studies of system-level issues. The underlying concept for this approach is to develop an equivalent circuit, the functional model, that performs the same functions as the actual circuit but whose operation can be simulated by using larger time step size and the reduction in model complexity, the computation time required by a functional model is significantly shorter than that required by alternative approaches. The authors present this novel modeling approach and discuss the functional models of two major power electronic components, the DC/DC converter unit and the load converter, that are being considered by NASA for use in the Space Station Freedom electric power system. The validity of these models is established by comparing the simulation results with available experimental data and other simulation results obtained by using a more established modeling approach. The usefulness of this approach is demonstrated by incorporating these models into a power system model and simulating the system responses and interactions between components under various conditions.

Tam, Kwa-Sur↗
NASA NTRS2018

An Examination of Launch Vehicle Loads Reanalysis Techniques

The typical approach to calculating dynamic launch loads in aerospace applications is coupled loads analysis (CLA). A component mode model of the launch vehicle is coupled with a component mode model of a payload, system modes are calculated, forcing functions are applied, and the dynamic responses are computed. This approach requires the explicit knowledge of the component models for the launch vehicle and payload, as well as the forcing functions. In many situations, the launch vehicle and forcing functions do not change from one analysis to the next only the payload is different. For this type of application, a method called reanalysis was developed to compute the response of a modified payload on the same launch vehicle. If the launch forcing functions are also the same, the approach eliminates the need for the launch vehicle model and the forcing functions and dramatically reduces the computation time. This work investigates the application and accuracy of three previously developed reanalysis methods using a typical launch vehicle and two different payloads. All three methods are based on knowledge of system modes from the original CLA, and Hurty/Craig-Bampton (HCB) models of the original and new payloads. The first method was developed at JPL (Jet Propulsion Lab) and is often referred to as substitution. It is a frequency-domain method, which requires transformation of time signals to and from the frequency domain. The other two methods are time-domain methods that more closely mimic the CLA process. The three methods were applied to two simple examples and a more complex one. The results indicate that the time-domain methods are considerably more robust with respect to modal truncation and other numerical errors than the frequency-domain JPL method.

Reanalysis↗
NASA NTRS1991

Analysis of model Titan atmospheric components using ion mobility spectrometry

The Gas Chromatograph-Ion Mobility Spectrometer (GC-IMS) was proposed as an analytical technique for the analysis of Titan's atmosphere during the Cassini Mission. The IMS is an atmospheric pressure, chemical detector that produces an identifying spectrum of each chemical species measured. When the IMS is combined with a GC as a GC-IMS, the GC is used to separate the sample into its individual components, or perhaps small groups of components. The IMS is then used to detect, quantify, and identify each sample component. Conventional IMS detection and identification of sample components depends upon a source of energetic radiation, such as beta radiation, which ionizes the atmospheric pressure host gas. This primary ionization initiates a sequence of ion-molecule reactions leading to the formation of sufficiently energetic positive or negative ions, which in turn ionize most constituents in the sample. In conventional IMS, this reaction sequence is dominated by the water cluster ion. However, many of the light hydrocarbons expected in Titan's atmosphere cannot be analyzed by IMS using this mechanism at the concentrations expected. Research at NASA Ames and PCP Inc., has demonstrated IMS analysis of expected Titan atmospheric components, including saturated aliphatic hydrocarbons, using two alternate sample ionizations mechanisms. The sensitivity of the IMS to hydrocarbons such as propane and butane was increased by several orders of magnitude. Both ultra dry (waterless) IMS sample ionization and metastable ionization were successfully used to analyze a model Titan atmospheric gas mixture.

Kojiro, D. R.↗
NASA NTRS1992

Testing the Li-Strahler four-component canopy reflectance model in the HAPEX-Sahel shrub savanna sites using ground reflectance data

The rate at which a light field decays in water is characterized by the diffuse attenuation coefficient k. The Li-Strahler discrete-object canopy reflectance model was tested in two sites, a shrub grass savanna and a degraded shrub savanna on bare soil, in the proposed HAPEX (Hydrologic Atmospheric Pilot Experiment) II/Sahel study area in Niger, West Africa. Average site reflectance was predicted for each site from the reflectances and cover proportions of four components: shrub canopy, background (soil or grass and soil), shaded canopy, and shaded background. Component reflectances were sampled in the SPOT wavebands using a hand-held radiometer. Predicted reflectance was compared to average site reflectance measured using the same radiometer mounted on a backpack with measurements recorded every 5 m along two 1-km transects, also in the SPOT (Systeme Probatoire d'Observation de la Terre) bands. Measurements and predictions were made for each of the three days during the summer growing season, approximately two weeks apart. Red, near infrared reflectance, and the NDVI (normalized difference vegetation index) were all predicted with a high degree of accuracy for the shrub/grass site and with reasonable accuracy for the degraded shrub site.

Franklin, J.↗