Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compact objects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Raman Life Detection Instrument Development for Icy Worlds

The objective of this project is to develop a compact, high sensitivity Raman sensor for detection of life signatures in a flow cell configuration to enable bio-exploration and life detection during future mission to our Solar Systems Icy Worlds. The specific project objectives are the following: 1) Develop a Raman spectroscopy liquid analysis sensor for biosignatures; 2) Demonstrate applicability towards a future Enceladus or other Icy Worlds missions; 3) Establish key parameters for integration with the ARC Sample Processor for Life on Icy Worlds (SPLIce); 4) Position ARC for a successful response to upcoming Enceladus or other Icy World mission instrument opportunities.

astrobiolog↗

Radiation force on a relativistic plasma and the Eddington limit

Calculations of the radiation force due to Thomson scattering on a relativistic plasma are presented and discussed in relation to certain astronomical objects which operate within a few orders of magnitude of their Eddington luminosity. The radiation force on a hot isotropic plasma is shown to exceed that on a cold plasma by a factor depending on the electron Lorentz factor, which can be substantial in a relativistic plasma. In such a plasma, radiative bulk acceleration is found to occur through the anisotropic loss of internal energy during the Thomson scattering, resulting in an effect termed a Compton rocket. The Compton rocket is shown to be a relevant acceleration mechanism in situations where a relativistic electron plasma lies in the vicinity of a luminous source operating near the classical Eddington limit, including compact galactic X-ray sources and objects associated with active galactic nuclei (quasars, blazars, and Seyfert nuclei).

Odell, S. L.↗

Hard gamma ray emission from blazars

The gamma-ray emission expected from compact extragalactic sources of nonthermal radiation is examined. The highly variable objects in this class should produce copious amounts of self-Compton gamma-rays in the compact relativistic jet. This is shown to be a likely interpretation of the hard gamma-ray emission recently detected from the quasar 3C 279 during a period of strong nonthermal flaring at lower frequencies. Ways of discriminating between the self-Compton model and other possible gamma-ray emission mechanisms are discussed.

Marscher, Alan P.↗

Radio-source positions from VLBI

Positions of 85 compact extragalactic radio sources and the Galactic object Beta Persei (Algol) have been determined in the J2000.0 coordinate system for analysis of VLBI observations made with the bandwidth-synthesis technique. Twenty-four of these sources were observed with the Mark I VLBI system in 37 sessions distributed between April 1972 and May 1978, and 82 of the sources were observed with the Mark III system in 85 sessions distributed between August 1979 and December 1982. Each session spanned at least 24 hr. Standard errors for the estimated positions on the sky of the about 10 sources frequently observed with the Mark I system are about 1 mas, except for the declinations of nearly equatorial sources, where these errors approach 5 mas. Corresponding uncertainties for the about 20 sources frequently observed with the Mark III system are 0.3 and 2 mas, respectively.

Ma, C.↗

VY Monocerotis and the IC 446 region - Far-infrared and submillimeter images of a massive young stellar object and its environment

The reflection nebulae IC 446 has been mapped in an 8 x 8-arcmin area at 100, 160, and 370 microns using 32-channel bolometer-array detectors on the 0.9-m telescope of the NASA Kuiper Airborne Observatory and the 3-m telescope of the NASA Infrared Telescope Facility. These data have been combined with IRAS profiles at 12, 25, 60, and 100 microns to investigate the morphology and energetics of the region. The FIR through submm emission in the neighborhood of IC 446 is composed of three components: a compact point source associated with the young stellar object VY Mon, warm extended emission associated with dust in the reflection nebula IC 446, and cold extended emission associated with a dark absorption nebula or globule.

Casey, S. C.↗

Object Recognition using Feature- and Color-Based Methods

An improved adaptive method of processing image data in an artificial neural network has been developed to enable automated, real-time recognition of possibly moving objects under changing (including suddenly changing) conditions of illumination and perspective. The method involves a combination of two prior object-recognition methods one based on adaptive detection of shape features and one based on adaptive color segmentation to enable recognition in situations in which either prior method by itself may be inadequate. The chosen prior feature-based method is known as adaptive principal-component analysis (APCA); the chosen prior color-based method is known as adaptive color segmentation (ACOSE). These methods are made to interact with each other in a closed-loop system to obtain an optimal solution of the object-recognition problem in a dynamic environment. One of the results of the interaction is to increase, beyond what would otherwise be possible, the accuracy of the determination of a region of interest (containing an object that one seeks to recognize) within an image. Another result is to provide a minimized adaptive step that can be used to update the results obtained by the two component methods when changes of color and apparent shape occur. The net effect is to enable the neural network to update its recognition output and improve its recognition capability via an adaptive learning sequence. In principle, the improved method could readily be implemented in integrated circuitry to make a compact, low-power, real-time object-recognition system. It has been proposed to demonstrate the feasibility of such a system by integrating a 256-by-256 active-pixel sensor with APCA, ACOSE, and neural processing circuitry on a single chip. It has been estimated that such a system on a chip would have a volume no larger than a few cubic centimeters, could operate at a rate as high as 1,000 frames per second, and would consume in the order of milliwatts of power.

Duong, Tuan↗

Optimal tooth numbers for compact standard spur gear sets

The design of a standard gear mesh is treated with the objective of minimizing the gear size for a given ratio, pinion torque, and allowable tooth strength. Scoring, pitting fatigue, bending fatigue, and the kinematic limits of contact ratio and interference are considered. A design space is defined in terms of the number of teeth on the pinion and the diametral pitch. This space is then combined with the objective function of minimum center distance to obtain an optimal design region. This region defines the number of pinion teeth for the most compact design. The number is a function of the gear ratio only. A design example illustrating this procedure is also given.

Savage, M.↗

Optimal tooth numbers for compact standard spur gear sets

The design of a standard gear mesh is treated with the objective of minimizing the gear size for a given ratio, pinion torque, and allowable tooth strength. Scoring, pitting fatigue, bending fatigue, and the kinematic limits of contact ratio and interference are considered. A design space is defined in terms of the number of teeth on the pinion and the diametral pitch. This space is then combined with the objective function of minimum center distance to obtain an optimal design region. This region defines the number of pinion teeth for the most compact design. The number is a function of the gear ratio only. A design example illustrating this procedure is also given.

Savage, M.↗

Nanosail-D: The Small Satellite That Could!

Three years from its initial design review, NanoSail-D successfully deployed its sail on January 20th, 2011. It became the first solar sail vehicle to orbit the earth and the second sail ever unfurled in space. The NanoSail-D mission had two main objectives: eject a nanosatellite from a microsatellite; deploy its sail from a highly compacted volume and low mass system to validate large structure deployment and potential de-orbit technologies. These objectives were successfully achieved and the de-orbit analysis is in process. This paper presents an overview of the NanoSail-D project and insights into how potential setbacks were overcome. Many lessons have been learned during these past three years and are discussed in light of the phenomenal success and interest that this small satellite has generated. NanoSail-D was jointly designed and built by NASA's Marshall Space Flight Center and NASA's Ames Research Center. ManTech/NeXolve Corporation also provided key sail design support. The NanoSail-D experiment is managed by Marshall and jointly sponsored by the Army Space and Missile Defense Command, the Von Braun Center for Science and Innovation and Dynetics Inc. Ground operations support was provided by Santa Clara University, with radio beacon packets received from amateur operators around the world.

Alhorn, Dean C.↗

Compact Laser Multi-gas Spectral Sensors for Spacecraft Systems

The objective of this research effort has been the development of a new gas sensor technology to meet NASA requirements for spacecraft and space station human life support systems for sensitive selective and real time detection of trace gas species in the mid-infrared spectral region.

Tittel, Frank K.↗

The nature of AFGL 2591 and its associated molecular outflow: Infrared and millimeter-wave observations

The results of infrared photometry from 2 to 160 microns of AFGL and CO(12) observations of its associated molecular cloud and high velocity molecular outflow are presented and discussed. The observed solar luminosity is 6.7 x 10(4) at a distance of 2 kpc. The spectrum of AFGL 2591 is interpreted in the context of a model in which a single embedded object is the dominant source of the infrared luminosity. This object is determined to be surrounded by a compact, optically thick dust shell with a temperature in excess of several hundred degrees kelvin. The extinction to this source is estimated to be between 26 and 50 visual magnitudes. The absolute position of the infrared sources at 10 microns was determined to an accuracy of + or in. This indicates for the first time that the IR source and H2O source are not coincident. The CO(12) observations show the high-velocity molecular flow near AFGL 2591 to be extended, bipolar and roughly centered on the infrared emission. The observations suggest that the red-shifted flow component extends beyond the boundary of the ambient cloud within which AFGL 2591 is embedded. The CO(12) observations also show that AFGL 2591 is embedded in a molecular cloud with an LSR velocity of -5 km/s.

Lada, C. J.↗

X-ray studies of BL Lacertae objects with the Einstein Observatory - Confrontation with the synchrotron self-Compton predictions

X-ray flux densities measured with the Einstein Observatory are presented for a set of LB Lac objects with available VLBI angular sizes. The static, single-component synchrotron self-Compton formalism is used to predict the X-ray flux densities. Ratios of 10 to the -6th to the 10 to the -8th are found for the observed to predicted flux densities and it is concluded that such a model, at least in its simplest form, does not explain the X-ray emission from these objects as a class. The hypothesis that the compact source is in relativistic motion allows a simple resolution of the discrepancy. The results agree qualitatively with a broad distribution of bulk Lorentz factors Gamma with a fairly low typical value of Gamma approximately equal to and with a quasi-isotropic distribution of the direction of ejection relative to our line of sight.

Madejski, G. M.↗

The nature of AFGL 2591 and its associated molecular outflow Infrared and millimeter-wave observations

The results of infrared photometry from 2 to 160 microns of AFGL and CO(12) observations of its associated molecular cloud and high velocity molecular outflow are presented and discussed. The observed solar luminosity is 6.7 x 10(4) at a distance of 2 kpc. The spectrum of AFGL 2591 is interpreted in the context of a model in which a single embedded object is the dominant source of the infrared luminosity. This object is determined to be surrounded by a compact, optically thick dust shell with a temperature in excess of several hundred degrees kelvin. The extinction to this source is estimated to be between 26 and 50 visual magnitudes. The absolute position of the infrared sources at 10 microns was determined to an accuracy of + or - 1 in. This indicates for the first time that the IR source and H2O source are not coincident. The CO(12) observations show the high-velocity molecular flow near AFGL 2591 to be extended, bipolar and roughly centered on the infrared emission. The observations suggest that the red-shifted flow component extends beyond the boundary of the ambient cloud within which AFGL 2591 is embedded. The CO(12) observations also show that AFGL 2591 is embedded in a molecular cloud with an LSR velocity of -5 km/s.

Lada, C. J.↗

Transformation reborn: A new generation expert system for planning HST operations

The Transformation expert system (TRANS) converts proposals for astronomical observations with the Hubble Space Telescope (HST) into detailed observing plans. It encodes expert knowledge to solve problems faced in planning and commanding HST observations to enable their processing by the Science Operations Ground System (SOGS). Among these problems are determining an acceptable order of executing observations, grouping of observations to enhance efficiency and schedulability, inserting extra observations when necessary, and providing parameters for commanding HST instruments. TRANS is currently an operational system and plays a critical role in the HST ground system. It was originally designed using forward-chaining provided by the OPS5 expert system language, but has been reimplemented using a procedural knowledge base. This reimplementation was forced by the explosion in the amount of OPS5 code required to specify the increasingly complicated situations requiring expert-level intervention by the TRANS knowledge base. This problem was compounded by the difficulty of avoiding unintended interaction between rules. To support the TRANS knowledge base, XCL, a small but powerful extension to Commom Lisp was implemented. XCL allows a compact syntax for specifying assignments and references to object attributes. XCL also allows the capability to iterate over objects and perform keyed lookup. The reimplementation of TRANS has greatly diminished the effort needed to maintain and enhance it. As a result of this, its functions have been expanded to include warnings about observations that are difficult or impossible to schedule or command, providing data to aid SPIKE, an intelligent planning system used for HST long-term scheduling, and providing information to the Guide Star Selection System (GSSS) to aid in determination of the long range availability of guide stars.

Gerb, Andrew↗

Radar images of asteroid Toutatis

Radar images of a near-Earth asteroid, Toutatis, were obtained from earth in December 1992. The asteroid was found to be a compact binary consisting of two irregularly shaped cratered objects and rotating with a period of 10 and 11 days. These results carry significant implications for understanding the origin and evolution of near-earth asteroids.

Mclaughlin, William I.↗

Obscured Star-Formation in Merging Galaxies: High Resolution Radio Imaging of a Time-Ordered Sequence

We present new, deep, high resolution 6cm and 4cm radio continuum images of the central regions of a time-ordered sequence of seven large galaxy mergers. The radio observations are able to detect star-forming re- gions that are completely obscured at optical wavelengths. In all systems, we detect numerous compact radio sources embedded in more diffuse ra- dio emission, with limiting luminosities of approx. 1-5 x 10(exp l8) W Hz or approx. 1-5 times the luminosity of Cas A. Many of the compact radio sources are loosely associated with active starforming regions but not with specific optical or W emission sources. Several of the compact radio sources are coincident with Ultra-luminous X-ray objects (ULX's). In most systems, we are able to measure reliable spectral indices for the stronger sources. We find that the fraction of compact radio cources with nominally flat radio spectral indices (indicating they ae dominated by thermal radio emission from HII regions) decreases with merger age, while the fraction of sources with nonimally steep spectral indices (indicating they are dominated by nonthermal emission from supernova remnants) increases. For the flat-spectrum sources, we estimate the numbers of young massive stars, associated ionized gas masses, we estimate supernova rates and required star-formation rates, We compare these results with those from other well-studied merging galaxy systems and from other determinations of star-formation rates. We gratefully acknowledge use of the NRAO Very Large Array (VLA) and the VLA Archive. NRAO is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc.

Neff, S. G.↗

Multipurpose Hyperspectral Imaging System

A hyperspectral imaging system of high spectral and spatial resolution that incorporates several innovative features has been developed to incorporate a focal plane scanner (U.S. Patent 6,166,373). This feature enables the system to be used for both airborne/spaceborne and laboratory hyperspectral imaging with or without relative movement of the imaging system, and it can be used to scan a target of any size as long as the target can be imaged at the focal plane; for example, automated inspection of food items and identification of single-celled organisms. The spectral resolution of this system is greater than that of prior terrestrial multispectral imaging systems. Moreover, unlike prior high-spectral resolution airborne and spaceborne hyperspectral imaging systems, this system does not rely on relative movement of the target and the imaging system to sweep an imaging line across a scene. This compact system (see figure) consists of a front objective mounted at a translation stage with a motorized actuator, and a line-slit imaging spectrograph mounted within a rotary assembly with a rear adaptor to a charged-coupled-device (CCD) camera. Push-broom scanning is carried out by the motorized actuator which can be controlled either manually by an operator or automatically by a computer to drive the line-slit across an image at a focal plane of the front objective. To reduce the cost, the system has been designed to integrate as many as possible off-the-shelf components including the CCD camera and spectrograph. The system has achieved high spectral and spatial resolutions by using a high-quality CCD camera, spectrograph, and front objective lens. Fixtures for attachment of the system to a microscope (U.S. Patent 6,495,818 B1) make it possible to acquire multispectral images of single cells and other microscopic objects.

Mao, Chengye↗

Design and Analysis of a Hyperspectral Microwave Receiver Subsystem

Hyperspectral microwave (HM) sounding has been proposed to achieve unprecedented performance. HM operation is achieved using multiple banks of RF spectrometers with large aggregate bandwidth. A principal challenge is Size/Weight/Power scaling. Objectives of this work: 1) Demonstrate ultra-compact (100 cm3) 52-channel IF processor (enabler); 2) Demonstrate a hyperspectral microwave receiver subsystem; and 3) Deliver a flight-ready system to validate HM sounding.

Blackwell, W.↗