Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell wall”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Soil properties and biochemical composition of ground-dwelling bee nests in agricultural settings

Soils deliver underrecognized ecosystem services by supplying habitat for ground-dwelling pollinators, such as wild bees and other organisms, that pollinate 80% of insect-pollinated plants and play a critical role in securing resilient pollination provisions. Our objective is to identify soil properties of ground nesting bee nests in agricultural settings of western Oregon, USA. We confirmed ground nesting bee and sand wasp activity in 7 agricultural sites and 1 recreational park. Soils from 17 bee and sand wasp nests were analyzed for pH, particle size distribution, and carbon and nitrogen content. We visually confirmed that 8 of the nesting bees were sweat bees from the Halictidae family and identified a captured bee specimen as Lasioglossum (Dialictus) (Hymenoptera: Halictidae). We located 2 sites with sand wasps where specimens were identified as Cerceris and Bembix (Hymenoptera: Crabronidae). The organic matter composition of three soil samples scraped from the linings of active nests were assessed using Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). The FTICR-MS results identified unknown lipid compounds in the nest soil samples, which we hypothesize are waterproofing lipids secreted to line cell walls. Bee nests occurred in slightly acidic, bare-ground soils with low rock/vegetation coverage, low organic carbon content (<1%), and exhibited significantly higher silt-plus-clay fractions (>75%) versus data published for bee nests in prior work. Our findings present important implications for textural controls on nest site selection in wet, cool environments and demonstrate the importance of integrating soil properties to improve our understanding of ground-dwelling organisms and associated soil habitats.

59 BASIC BIOLOGICAL SCIENCES↗

Chapter 3: New Developments on Ionic Liquid-Tolerant Microorganisms Leading Toward a More Sustainable Biorefinery

The growing concerns about climate change and energy security are driving the development of bio-based technologies to produce renewable liquid fuels and chemicals. Ionic liquids (ILs) have demonstrated to be promising solvents to pretreat lignocellulosic residues, promoting efficient enzymatic hydrolysis of lignocellulosic carbohydrates into sugars, which can be further used by microorganisms to produce biofuels and other value-added chemicals. Despite their unique properties to effectively deconstruct plant cell walls, ILs show strong interactions with the pretreated biomass, and their presence is often inhibitory to cellulolytic enzymes and microorganisms. The most advanced biorefinery concepts based on IL pretreatments focus on the development of more biocompatible ILs and more robust microbial strains with higher tolerance to ILs. This chapter provides an overview and a discussion over the main efforts performed on the screening and development of IL-tolerant microbial strains, as well as in more biocompatible IL pretreatment methods. These early research advancements in this field offer a baseline and a platform for future research with the goal of improving the sustainability and economic viability of IL pretreatment-based biorefineries.

bioconversion↗

Deuterium incorporation into cellulose: a mini-review of biological and chemical methods

Isotopic enrichment offers structural insights that are not easily accessible with natural abundance isotopic composition. Deuterated cellulose has attracted considerable attention in the field of neutron scattering studies, providing information about the dynamics, structure of cellulose and its interactions with other plant cell wall components. The deuteration of cellulose also allows the analysis of cellulose hydrogen bonds by FTIR or NMR techniques. The chemical structure of cellulose contains both exchangeable hydroxyl and non-exchangeable alkyl hydrogens. Deuterium incorporation can be divided into two classifications: biological route which incorporates both alkyl and hydroxyl bound deuterium, and chemical route which typically replaces hydroxyl-bound exchangeable hydrogen. Additionally, the biological route involves cultivating plants or microorganisms in a deuterium-enriched medium. The chemical route typically involves an exchange reaction between hydroxyl-bound hydrogen and D 2 O, often facilitating with an alkaline reagent. This review provides an overview of recent advances in deuteration methods and characterization as well as the application of deuterated cellulose.

59 BASIC BIOLOGICAL SCIENCES↗

Development and Field Assessment of Transgenic Hybrid Switchgrass for Improved Biofuel Traits

Development of commercially relevant bioenergy switchgrass cultivars requires reducing recalcitrance for bioprocessing without compromising biomass yield. Low-lignin transgenic switchgrass has been produced via down-regulation of caffeic acid O-methyltransferase (COMT), a lignin biosynthetic enzyme, or by over-expression of the MYB4 transcription factor, a repressor of the lignin biosynthetic pathway. The aim of this study was to evaluate parents and selected hybrids obtained from COMT and MYB4 hybrid families under field conditions for agronomic performance and biomass quality. Plant height, width, number of tillers, dry weight, cell wall composition including lignin content, and sugar release were measured after the establishment year (2014) and the second growing season (2015). For COMT hybrids, biomass yield of the transgenic hybrids was similar to or greater than the wild-type parents selected for high biomass. Lignin content of COMT transgenic hybrids was reduced by 10%, S/G ratio decreased by 27%, and sugar release increased between 20% and 44% compared to their wild-type parents. These results indicate that hybridization of COMT with a high-yielding locally selected genotype resulted in both improved agronomic performance and enhanced biomass quality in the offspring. On the other hand, the MYB transgenic hybrid showed a 10% reduction in biomass yield compared with its wild-type parent in year 1, but not in year 2. The lignin S/G ratio was not reduced in MYB transgenic hybrids, nor was sugar release increased. These data indicate that the MYB transgene may not be suitable for an agronomic setting. More testing is needed of transgenic and wild-type, high-biomass selections for use as breeding parents. These results show that combining low-lignin transgenic switchgrass with a breeding and selection program for biomass yield will allow for the deployment of effective transgenes in high-yielding genetic backgrounds.

09 BIOMASS FUELS↗

Influence of Solidification Velocity on Partitioning and Precipitate Evolution in a Multicomponent, Soft Magnetic Alloy Processed by Laser Melting

Multicomponent alloys have recently been shown to overcome the structural-functional barrier associated with soft magnetic materials. Here, single laser tracks have been used to investigate the effects of solidification velocity on the Al 7 Fe 32.6 Co 27.7 Ni 27.7 Ta 5 (at pct) alloy. Ta-rich cell wall partitioning was shown to affect the final distribution and size of the precipitating L1 2 phase, after aging. These findings demonstrate that solidification rate control offers the potential to tailor localized performance in alloys with size-dependent precipitation properties.

Brookins, Jeffrey M. [Oak Ridge National Laborator↗

Genotype-Environment-Management Interactions in Biomass Yield and Feedstock Composition of Photoperiod-Sensitive Energy Sorghum

Recently introduced photoperiod-sensitive (PS) biomass sorghum (Sorghum bicolor L. Moench) needs to be investigated for their yield potential under different cultivation environments with reasonable nitrogen (N) inputs. The objectives of this study were to (1) evaluate the biomass yield and feedstock quality of four sorghum hybrids with different levels of PS ranging from very PS (VPS) hybrids and to moderate PS (MPS) hybrids, and (2) determine the optimal N inputs (0~168 kg N ha -1 ) under four environments: combinations of both temperate (Urbana, IL) and subtropical (College Station, TX) regions during 2018 and 2019. Compared to TX, the PS sorghums in central IL showed higher yield potential and steady feedstock production with an extended day length and with less precipitation variability, especially for the VPS hybrids. The mean dry matter (DM) yields of VPS hybrids were 20.5 Mg DM ha -1 and 17.7 Mg DM ha -1 in IL and TX, respectively. The highest N use efficiency occurred at a low N rate of 56 kg N ha -1 by improving approximately 33 kg DM ha -1 per 1.0 kg N ha -1 input. Approximately 70% of the PS sorghum biomass can be utilized for biofuel production, consisting of 58-65% of the cell-wall components and 4-11% of the soluble sugar. Finally, this study demonstrated that the rainfed temperate area (e.g., IL) has a great potential for the sustainable cultivation of PS energy sorghum due to their observed high yield potential, stable production, and low N requirements.

09 BIOMASS FUELS↗

Nitrogen Fertilizer, Arbuscular Mycorrhizal Fungi, and Soil Nematodes Affect Lignin Quality and Quantity in Switchgrass (Panicum virgatum L.)

Plant lignin content and composition, which limit cell wall digestibility and efficiency of cellulose conversion to bioethanol, can be influenced by belowground biotic and abiotic factors. Switchgrass (Panicum virgatum L.) is a leading lignocellulosic biofuel crop and forms strong belowground associations with arbuscular mycorrhizal fungi (AMF), is susceptible to belowground plant-parasitic nematodes (PPN), and when grown in monoculture generally requires nitrogen (N) fertilization. The main objectives of the study were to investigate the effects of N fertilizer and belowground organisms on lignin content and composition of switchgrass. Here, leaf, stem, and root tissues were evaluated separately to test whether these factors had varying belowground (local) or aboveground (systemic) effects on plants. These factors were manipulated in a field study in 2017 using biocide applications to reduce soil fungi and nematodes. Combined biocide application reduced p-hydroxyphenyl (H) unit abundance in the leaves by 14% and increased the syringyl:guaiacyl (S:G) ratio in stems by 2%. Application of fungicide alone increased stem syringyl (S) unit by 12.4% as compared with control plots, and 11.1% as compared with nematicide plots. Overall, fertilizer increased total stem lignin by 3%, stem S unit by 6.7%, and stem S:G ratio by 10%, whereas it reduced the amount of H-unit in the roots by 11%. While the effects of N fertilizer were more pronounced in this study, changes to soil organisms had similar magnitudes of effect for some measures of lignin, indicating that these belowground interactions may be important for growers to consider in the future.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of biological materials with soft X-ray scattering

The complex structure of biological assemblies is crucial for function yet challenging to discern given the chemical similarities between constituent components. Hard X-ray techniques, for example, rely on small density differences between domains that lead to modest scattering intensities. Resonant soft X-ray scattering (RSoXS) uses X-rays below 2 keV to access absorption edges of low-Z elements. In this way, RSoXS can enhance scattering contrast between domains of different chemical compositions or bonding motifs, thus providing structural information about specific chemical motifs. RSoXS is emerging as a technique applicable for biological systems, having been used to characterize protein structure in solution and polysaccharide organization in plant cell walls. Sample environment instrumentation, however, is challenging in the current state of the art, particularly with liquid samples. Here, this chapter contains a brief introduction to RSoXS and current beamline capabilities, and provides methods to prepare, store, and mount biological samples for RSoXS characterization. Furthermore, key details during RSoXS and X-ray absorption data acquisition are highlighted and some future opportunities in RSoXS instrumentation for biological systems are discussed.

47 OTHER INSTRUMENTATION↗

Raman-probes for monitoring metabolites and nutrient fate in Yarrowia lipolytica using deuterated glucose

The aim of this study was to explore the application of deuterium (D) labeled glucose-D 7 as Raman-tag in Yarrowia lipolytica to assess triacyl glycerides (TAG) biosynthesis. Cells were grown in N depleted media in: (i) glucose in H 2 O (control), (ii) glucose-D 7 in H 2 O and (iii) glucose-D 7 in D 2 O, and the resulting biomass and lipids quantified. Infrared and Raman spectroscopies showed the incorporation of D with the presence of a C-D stretching bands in the silent region (1800–2600 cm -1 ) for cells grown in glucose-D 7 in H 2 O and glucose-D 7 in D 2 O as compared to the control. Fatty acid methyl ester analysis of cells grown in the three media showed significant differences in lipid profiles. Cells grown on glucose-D 7 in H 2 O and glucose-D 7 in D 2 O showed unequivocally D incorporation in fatty acids and TAG by mass spectrometry. Higher D incorporation was observed when cells were grown in D 2 O than H 2 O. Deuterium was also incorporated into the cell wall polysaccharides.

59 BASIC BIOLOGICAL SCIENCES↗

Cost impact of hexose-to-pentose sugar ratios for biomanufacturing

Central to the long-term vision for biomanufacturing is the ability to deconstruct plant cell walls to sugars that microbes can convert to products. Aside from glucose, the most abundant sugar in biomass is xylose, a pentose sugar. Industrially relevant microbes have been engineered to co-ferment xylose and glucose. Most nth plant technoeconomic analyses (TEAs) assume similar consumption rates and product yields for both sugars, but in reality, xylose is consumed more slowly. Feedstocks can be selected, or engineered, to alter the glucan-to-xylan ratio (GXR) but no TEAs have quantified the impact of this strategy systematically. This study explores the cost impacts of varying the glucan-to-xylan ratio (GXR) from 1.9 to 6.7 for co-fermenting glucose and xylose to ethanol and bisabolene. The minimum selling prices (MSPs) for both products decrease as the GXR increases, with the largest reductions at shorter residence times. For instance, with an increase in GXR from 1.9 to 6.7, ethanol’s MSP drops by 16 %, 5 %, and 3 % at 24, 72, and 144 h, respectively, while bisabolene’s MSP declines by 23 %, 20 %, and 15 % at 24, 72, and 120 h. Particularly for early-stage commercialization, the results suggest that altering or selecting for feedstocks with higher GXR can minimize capital costs by reducing optimal residence times. Capital-constrained biorefineries operating with shorter residence times can justify paying up to 1.5X to 2X the price for feedstocks with a higher GXR, based on the expected improvements in their product yield and overall process economics.

Delayed xylose utilization↗

Lpp positions peptidoglycan at the AcrA-TolC interface in the AcrAB-TolC multidrug efflux pump

The multidrug efflux pumps of Gram-negative bacteria are a class of complexes that span the periplasm, coupling both the inner and outer membranes to expel toxic molecules. The best-characterized example of these tripartite pumps is the AcrAB-TolC complex of Escherichia coli. However, how the complex interacts with the peptidoglycan (PG) cell wall, which is anchored to the outer membrane (OM) by Braun’s lipoprotein (Lpp), is still largely unknown. In this work, we present molecular dynamics simulations of a complete, atomistic model of the AcrAB-TolC complex with the inner membrane, OM, and PG layers all present. We find that the PG localizes to the junction of AcrA and TolC, in agreement with recent cryo-tomography data. Free-energy calculations reveal that the positioning of PG is determined by the length and conformation of multiple Lpp copies anchoring it to the OM. The distance between the PG and OM measured in cryo-electron microscopy images of wild-type E. coli also agrees with the simulation-derived spacing. Finally, sequence analysis of AcrA suggests a conserved role for interactions with PG in the assembly and stabilization of efflux pumps, one that may extend to other trans-envelope complexes as well.

59 BASIC BIOLOGICAL SCIENCES↗

Rational Enzyme Design for Controlled Functionalization of Acetylated Xylan for Cell-Free Polymer Biosynthesis

Xylan O-acetyltransferase 1 (XOAT1) is involved in O-acetylating the backbone of hemicellulose xylan. Recent structural analysis of XOAT1 showed two unequal lobes forming a cleft that is predicted to accommodate and position xylan acceptors into proximity with the catalytic triad. Here, we used docking and molecular dynamics simulations to investigate the optimal orientation of xylan in the binding cleft of XOAT1 and identify putative key residues (Gln445 and Arg444 on Minor lobe & Asn312, Met311 and Asp403 on Major lobe) involved in substrate interactions. Site-directed mutagenesis coupled with biochemical analyses revealed the major lobe of XOAT1 is important for xylan binding. Mutation of single key residues yielded XOAT1 variants with various enzymatic efficiencies that are applicable to one-pot synthesis of xylan polymers with different degrees of O-acetylation. Taken together, our results demonstrate the effectiveness of computational modeling in guiding enzyme engineering aimed at modulating xylan and redesigning plant cell walls.

93 SC - Biological and Environmental Research (BER↗

Overexpression of a gibberellin 20-oxidase gene in poplar xylem led to an increase in the size of nanocellulose fibrils and improved paper properties

Cellulose, the major component of secondary cell walls, is the most abundant renewable long-chain polymer on earth. Nanocellulose has become a prominent nano-reinforcement agent for polymer matrices in various industries. We report the generation of transgenic hybrid poplar overexpressing the Arabidopsis gibberellin 20-oxidase1 gene driven by a xylem-specific promoter to increase gibberellin (GA) biosynthesis in wood. X-ray diffraction (XRD) and sum frequency generation spectroscopic (SFG) analyses showed that cellulose in transgenic trees was less crystalline, but the crystal size was larger. The nanocellulose fibrils prepared from transgenic wood had an increased size compared to those from wild type. When such fibrils were used as a reinforcing agent in sheet paper preparation, the mechanical strength of the paper was significantly enhanced. Engineering the GA pathway can therefore affect nanocellulose properties, providing a new strategy for expanding nanocellulose applications.

59 BASIC BIOLOGICAL SCIENCES↗

Formin nanoclustering-mediated actin assembly during plant flagellin and DSF signaling

Plants respond to bacterial infection acutely with actin remodeling during plant immune responses. The mechanisms by which bacterial virulence factors (VFs) modulate plant actin polymerization remain enigmatic. Here, we show that plant-type-I formin serves as the molecular sensor for actin remodeling in response to two bacterial VFs: Xanthomonas campestris pv. campestris (Xcc) diffusible signal factor (DSF), and pathogen-associated molecular pattern (PAMP) flagellin in pattern-triggered immunity (PTI). Both VFs regulate actin assembly by tuning the clustering and nucleation activity of formin on the plasma membrane (PM) at the nano-sized scale. By being integrated within the cell-wall-PM-actin cytoskeleton (CW-PM-AC) continuum, the dynamic behavior and function of formins are highly dependent on each scaffold layer’s composition within the CW-PM-AC continuum during both DSF and PTI signaling. Our results reveal a central mechanism for rapid actin remodeling during plant-bacteria interactions, in which bacterial signaling molecules fine tune plant formin nanoclustering in a host mechanical-structure-dependent manner.

59 BASIC BIOLOGICAL SCIENCES↗

Atomistic origins of biomass recalcitrance in organosolv pretreatment

Separation of lignocellulosic biomass components for use in sustainable energy and biomaterials applications remains challenging, since biopolymers such as cellulose and hemicellulose carbohydrates and polyaromatic lignin are found in close proximity within the plant secondary cell wall. Organic solvents have been used to pretreat recalcitrant biomass and separate the interacting polymers, solubilizing the lignin fraction for lignin-first valorization approaches. However, no single organosolv pretreatment approach has proven superior for heterogeneous biomass samples. Here we present a complementary atomic view of interactions between biomass components using molecular simulations, specific to lignin and cellulose, resolving mechanistic hypotheses for how lignin-cellulose composition influences separation processes. Further, using lignin-cellulose binding free energy calculated using molecular simulations, we find polar protic solvents such as methanol and ethanol separate lignin from cellulose, irrespective of the charge on the lignin monomer. Aprotic organic solvents (DMSO, THF, 1,4-dioxane) separate uncharged lignin (phenols and monolignols) from cellulose, while charged lignin (cinnamates) prefer binding to cellulose.

09 BIOMASS FUELS↗

A network-enabled pipeline for gene discovery and validation in non-model plant species

Identifying key regulators of important genes in non-model crop species is challenging due to limited multi-omics resources. To address this, we introduce the network-enabled gene discovery pipeline NEEDLE, a user-friendly tool that systematically generates coexpression gene network modules, measures gene connectivity, and establishes network hierarchy to pinpoint key transcriptional regulators from dynamic transcriptome datasets. After validating its accuracy with two independent datasets, we applied NEEDLE to identify transcription factors (TFs) regulating the expression of cellulose synthase-like F6 ( CSLF6 ), a crucial cell wall biosynthetic gene, in Brachypodium and sorghum. Our analyses uncover regulators of CSLF6 and also shed light on the evolutionary conservation or divergence of gene regulatory elements among grass species. These results highlight NEEDLE’s capability to provide biologically relevant TF predictions and demonstrate its value for non-model plant species with dynamic transcriptome datasets.

59 BASIC BIOLOGICAL SCIENCES↗

The histone demethylase KdmB is part of a trimeric protein complex and mediates virulence and mycotoxin production in Penicillium expansum

Epigenetic modification of chromosome structure has increasingly been associated with alterations in secondary metabolism and sporulation defects in filamentous fungal pathogens. Recently, the epigenetic reader protein SntB was shown to govern virulence, spore production and mycotoxin synthesis in the fruit pathogen Penicillium expansum. Through immunoprecipitation-coupled mass spectrometry, we found that SntB is a member of a protein complex with KdmB, a histone demethylase and the essential protein RpdA, a histone deacetylase. Deletion of kdmB phenocopied some but not all characteristics of the ΔsntB mutant. KdmB deletion strains exhibited reduced lesion development on Golden Delicious apples and this was accompanied by decreased production of patulin and citrinin in host tissue. In addition, ΔkdmB mutants were sensitive to several cell wall stressors which possibly contributed to the decreased virulence observed on apples. In conclusion, slight differences in spore production and germination rates of ΔkdmB mutants in vitro did not impact overall diameter growth in culture.

59 BASIC BIOLOGICAL SCIENCES↗

Oxidation states of iron and manganese in lignocellulose altered by the brown rot fungus Gloeophyllum trabeum measured in-situ using X-ray absorption near edge spectroscopy (XANES)

Brown rot fungi utilize iron as part of a chelator-mediated Fenton (CMF) reaction during wood biodegradation. Research suggests these fungi reduce Fe 3+ to promote oxygen radical generation resulting in depolymerization of the wood cell wall. High levels of Mn are also found in wood decayed by brown rot fungi. However, little is known about the oxidation states of Fe and Mn during the decay process. X-ray absorption near edge spectroscopy (XANES) can be used to examine metal oxidation states and coordination chemistry. In this work, XANES experiments were conducted on wood decayed by Gloeophyllum trabeum over 2–8 weeks with results showing that Mn 2+ and Fe 3+ predominated for metal oxidation states. However, Fe 2+ was present at sites of greater fungal growth In certain cases, the μXANES measurements showed that the fraction of Fe 2+ in the wood samples was as high as 50%. Localized areas of reduced iron corresponded with areas of greater fungal hyphal mass which is in agreement with how brown rot fungi decay wood via the CMF reaction. The limited change in oxidation state of Mn observed in wood with active fungal activity suggests that the role of manganese in CMF biodegradation chemistry should be further explored.

59 BASIC BIOLOGICAL SCIENCES↗