Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “applied statistics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Uncertainties in turbulent statistics and fluxes of CO2 associated with density effect corrections

Density effect corrections (DEC) are applied to adjust raw CO2 fluxes measured by eddy covariance (EC) systems with open-path gas analyzers. DEC is also required for adjusting the measured CO2 concentration fluctuations to obtain the adjusted CO2 for analyzing turbulent statistics or quantifying fluxes. However, our data show that the power spectra of the DEC-adjusted CO2 are distorted in the high frequency range, as compared with the corresponding spectra of temperature and water vapor density. This contradicts the similarity behavior of scalars, as suggested by Monin-Obukhov similarity theory. It is demonstrated that such a distortion is caused by the DEC-induced spikes in the DEC-adjusted CO2, altering turbulent statistics of CO2 and scalar similarity between CO2 and other scalars. Our results suggest that CO2 fluxes are overestimated by applying DEC especially under high Bowen ratio conditions, potentially leading to substantial uncertainties in long-term ecosystem carbon exchange in dry regions.

Gao, Zhongming↗

On the probability of magnification by cosmologically distributed gravitational lenses

An analytical method for calculating the statistical properties of source magnification caused by gravitational lenses randomly distributed throughout the universe is presented. Two lenses are considered at different redshifts to show that such an assumption is a statistically adequate approximation. The derived general formulas are applied to point-mass lenses with both point and extended sources. Analytical results of the magnification probability for point sources are accurate to within 10 percent in comparison with the available numerical simulations to moderate redshifts of less than about 2. In terms of the flux conservation, the results are accurate to within 18 percent at a redshift of 6 with respect to the Dyer-Roeder model of a clumpy universe. It is concluded that the present formulas are adequate for statistical studies of magnification by random gravitational lenses on cosmological scales.

Pei, Yichuan C.↗

Statistical theory of cubic Langmuir turbulence

The cubic direct interaction approximation is applied to a truncated (in Fourier space) version of the cubically nonlinear Schroedinger equation model of Langmuir physics. The results are compared (in the three-mode case) to those for an ensemble of numerical solutions of the dynamical equations with 10,000 different sets of Gaussianly distributed initial conditions. In the undriven, undamped case, the statistical theory (but not the ensemble) evolves to a state of thermal equilibrium. In the driven, damped case, the statistical theory appears to evolve to a state close to that corresponding to one of the limit cycles of the dynamical equations.

Sun, G.-Z.↗

Shielding Effectiveness in a Two-Dimensional Reverberation Chamber Using Finite-Element Techniques

Reverberation chambers are attaining an increased importance in determination of electromagnetic susceptibility of avionics equipment. Given the nature of the variable boundary condition, the ability of a given source to couple energy into certain modes and the passband characteristic due the chamber Q, the fields are typically characterized by statistical means. The emphasis of this work is to apply finite-element techniques at cutoff to the analysis of a two-dimensional structure to examine the notion of shielding-effectiveness issues in a reverberating environment. Simulated mechanical stirring will be used to obtain the appropriate statistical field distribution. The shielding effectiveness (SE) in a simulated reverberating environment is compared to measurements in a reverberation chamber. A log-normal distribution for the SE is observed with implications for system designers. The work is intended to provide further refinement in the consideration of SE in a complex electromagnetic environment.

Bunting, Charles F.↗

Statistical approach to cubic Langmuir turbulence

Previous work on the cubic direct interaction approximation applied to the truncated (in Fourier space) cubically nonlinear Schroedinger equation model of Langmuir turbulence is extended to more modes. In the undriven, undamped case, excellent agreement between the statistical theory and a numerical ensemble of solutions of the dynamic equations is obtained. In the driven, damped case, satisfactory agreement is obtained provided the dynamic ensemble is limited to initial conditions in the basin of attraction.

Sun, G.-Z.↗

It's All Relative: A Validation of Radiation Quality Comparison Metrics

Historically, the relative biological effectiveness (RBE) has been calculated to quantify the difference between heavy ion and gamma ray radiation. The RBE is then applied to gamma ray data to predict the effects of heavy ions in humans. The RBE is an iso-effect dose-to-dose ratio which, due to its counterintuitive nature, has been commonly miscalculated as an iso-dose effect-to-effect ratio. A paper recently published by Shuryak et al described this second measure intentionally for the first time in 2017, referring to it as the radiation effects ratio (RER). In this study, we utilized simulations to test the ability of both the RBE and the RER to predict known heavy ion effects. RBEs and RERs were calculated using mouse data from Chang et al, and the ability of the RBE and RER to predict the heavy ion data from which they were calculated was verified. Statistical transformations often utilized during data analysis were applied to the gamma and heavy ion data to determine whether RBE and RER are each uniquely defined measures. Scale changes are expected when translating effects from mice to humans and between human populations; gamma and heavy ion data were transformed to represent potential scale changes. The ability of the RBE and RER to predict the transformed heavy ion data from the transformed gamma data was then tested. The RBE but not the RER was uniquely defined after all statistical transformations. The RBE correctly predicted the scale-transformed heavy ion data, while the RER did not. This presentation describes potential implications for both metrics in light of these findings.

Chappell, L. J.↗

Mercurian crater-filling classes constrain the emplacement process of the intercrater plains material

The multivariate method for statistical analysis of crater-filling classes, as presently applied to craters of more than 10-km diameter on Mercury, is noted to be superior to current techniques due to the obviation of any amalgamation of data from regions with different histories in order to arrive at the pertinent counting statistics. In this application to the Mercury intercrater plains, the process responsible for emplacement is constrained to be one that leaves the crater class distribution unaltered from that observed on the densely cratered terrain. The analysis explicitly eliminates the viability of the pulse emplacement of volcanics or basin ejecta.

Woronow, Alex↗

Electromagnetic noise and radio wave propagation below 100 kHz in the Jovian atmosphere. I - The equatorial region

The Galileo satellite program includes the delivery of an entry probe to the Jovian equatorial atmosphere in mid-1985. Optical and RF sensors for a lightning detection system are included as a part of the probe experimental payload. In this paper, calculations of the RF wave propagation and reflection characteristics of the equatorial Jovian atmosphere and ionosphere for frequencies less than 100 kHz are presented. It is shown that wave propagation is limited to line-of-sight and one-hop from the ionosphere. Results are also presented of a statistical treatment of the RF wave power densities for the case of a finite number of events and for the case of a uniformly distributed source. The results can be applied to specific RF experiment configurations concerned with establishing the statistical characteristics of Jovian lightning.

Rinnert, K.↗

The Development of a Generalized Riser Flow Regime Map Based Upon Higher Moment and Chaotic Statistics Using Electrical Capacitance Volume Tomography (ECVT)

Dynamic analyses have been applied to the temporal signals from an Electro Capacitance Volume Tomography instrument located near mid-height on the riser of an industrial-scale cold-flow circulating fluidized bed to characterize gas-solids flow behavior in the riser. Twelve capacitance electrodes surround the cylindrical riser over a height of 1.3 m. The instrument used a neural network deconvolution algorithm to determine the spatially resolved solids fraction recorded at 52 Hz. Experiments were carried out over a range of gas and solids flows in the transport regime using a Geldart Group B bed material, high density polyethylene with mean particle size of 880 μm. The radial solids distribution was found to vary from one-time step to the next between profiles typical of laminar and turbulent flow. The duration of time spent in each of these flow profiles depended upon the operating regime – dilute, core-annular, or fast fluidized bed. The chaotic structure of the temporal data was characterized using the three conventional approaches: the first 4 moments from the distribution of signal in time, system memory parameters from the autocorrelation function and the Hurst exponent, and analysis of the correlationentropy and correlation dimension of the attractor. These signal analysis techniques were used to clearly distinguish differences between different transport operating regimes. Specifically, it was experimentally observed that a riser transitions from core annular flow profile to dilute and dense regimes via increasing the frequency of short term transients to either dilute or dense flow profiles, respectively. A regime map was generated based upon these dynamics using solids flux and gas velocity axes. Fast fluidized, core annular, and dilute each exhibited different degree of dynamic characteristics typical of fluid dominated or particle compromising behavior. It should be noted that the magnitude for the different statistics was in the same range regardless of the regime, it was the radial profile for the statistic that changed and subsequently identified that there was a change in the regime. Finally, a reduced regime map was developed consisting of plotting the gas velocity normalized by the upper transport velocity versus the solids flux normalized by the saturation carrying capacity. The use of this reduced plot allowed the data from widely different conditions to be plotted and compared on the same<p>graph. Note that in many instances, some of the statistics identified the operating point as being in one regime while others indicated that it was in another indicating a transition region between dilute or core annular regimes and between the core annular and fast fluidization regimes. This now provides a tool that can be used to optimize process performance, identify changes in operating states, or replicate process dynamics during process scaling or changing operating parameters. </p>

Breault, Ronald↗

Machine Learning to Select Experiments Driven by Fundamental Science and Applications for Targeted Nuclear Data Improvement

This work describes a blueprint for a process that accelerates progress in science by quantitatively answering the following question: What is the optimal combination of fundamental-science and application-driven experiments to maximally reduce pertinent data uncertainties? Answering this question entails solving a high-dimensional and complex optimization problem that is best solved with advanced statistic techniques often classified as machine learning. We apply this process within the framework of nuclear data with the aim to select an experiment combination that will reduce uncertainties in 239 Pu nuclear data for neutron energies between 1 and 600 keV. In this field, fundamental-physics driven data, called differential, look at one nuclear physics observable at a time. They are contrasted to application-driven, integral, data where one or few resulting values inform a broad set of nuclear data across several nuclides and energies. The candidates for integral experiments are criticality measurements that were refined by a genetic algorithm to be maximally sensitive to 239 Pu fission cross sections in the desired energy range. Twenty-three candidate differential experiments were investigated and span multiple nuclear physics observables (e.g., total, capture cross sections) for isotopes appearing in the integral experiments. The optimal combination among these candidate experiments was investigated via generalized least squares fitting, augmented with Gaussian processes to ameliorate statistical irregularities in data, and the D-optimality criterion. The latter evaluates for each pair of candidates the joint reduction in uncertainties of all 12200 nuclear data appearing in the integral experiments compared to the knowledge we have from 168 past experiments, theory, and nuclear data. We chose as differential measurements those that investigate 63 Cu and 239 Pu total cross sections, based on D-optimality rank and feasibility constraints. Two integral (criticality) experiments were selected: An experiment with Al 2 ⁢O 3 and graphite interleaved with Pu and a thick Cu reflector explores 1–30 keV, while we target the 30–600 keV range with an experiment that swaps boron in place of graphite with a different geometry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

MARGInS: Model-Based Analysis of Realizable Goals in Systems

Under NASAs Constellation effort, the Exploration Technology Development Program funded research toward a system validation capability that applied machine learning and test-case generation techniques to the analysis of black-box system behavior. The behavior analysis capability scaled to spaces of hundreds of input parameters and tens of thousands of test cases. Aerospace systems at the vehicle level, especially those systems which contain some level of autonomy, are best described by hybrid and non-linear mathematics. Even simplified models of such systems need parameter dimensionalities in the hundreds or thousands of parameters in order to capture sufficient fidelity. The System Safety Assessments (such as those described in the SAE ARP 4761A Safety Assessment Process guidelines) for these systems are prone to errorinteractions between the vehicles subsystems are complex, and can display emergent behaviors. NASA captured this new analysis in the Model-based Analysis of Realizable Goals in Systems (MARGInS) tool and applied it to the Pad Abort 1 (PA-1) simulation as part of the independent validation and verification cycle before the PA-1 flight test in May of 2010. MARGInS evaluated the adherence of the high-fidelity simulation to its requirements, and deter- mined the margins to failure from the expected nominal input conditions. Following the PA-1 test, the capabilities within the MARGInS framework have been extended with sophisticated statistical and white-box test case generation techniques and applied to other NASA missions. The frame- work now includes a critical factors analysis that was applied to NASAs Orion simulation and design. NASAs Aeronautics Research Mission Directorate (ARMD) leveraged the existing MARGInS framework for work on aviation safety for civil transport vehicles and for research on autonomy issues. The NASA ARMD effort created a time series output prediction capability that has been used to characterize trajectories for a plane with an adaptive control system, and a safety boundary detection capability that has been applied to an air traffic control concept of operation for the Federal Aviation Administration. The statistical and machine- learning based techniques within MARGInS have been successfully combined with concolic execution to improve the coverage of a critical unit by driving system-level inputs. The use case driving the concolic execution and MARGInS integration was inspired by the Air France 447 disaster in which the loss of a critical functionality (the airspeed calculation from the pitot tubes) led to loss of the entire plane with the people aboard. To illustrate capabilities and limitations, we will highlight the analyses for the applications listed above. We will then discuss the future plans for MARGInS and its interfaces with other tools.

Validation↗

Maximum entropy method applied to deblurring images on a MasPar MP-1 computer

A statistical inference method based on the principle of maximum entropy is developed for the purpose of enhancing and restoring satellite images. The proposed maximum entropy image restoration method is shown to overcome the difficulties associated with image restoration and provide the smoothest and most appropriate solution consistent with the measured data. An implementation of the method on the MP-1 computer is described, and results of tests on simulated data are presented.

Bonavito, N. L.↗

Changes in When and Where People are Spending Time in Response to COVID-19

The COVID-19 pandemic has resulted in a significant change in driving behavior as people respond to the new environment. However, existing methods for analyzing driver behavior such as travel surveys and travel demand models are not suited for incorporating abrupt environmental disruptions. To address this, we analyze a set of high-resolution trip data and introduce two new metrics for quantifying driving behavioral shifts as a function of time, allowing us to compare the time periods before and after pandemic began. We apply these metrics to the Denver, Colorado metropolitan statistical area (MSA) to demonstrate the utility of the metrics. Then, we present a case study for comparing two distinct MSAs, Louisville, Kentucky; and Des Moines, Iowa which exhibit significant differences in the makeup of their labor markets. The results indicate that although the regions of study exhibit certain unique driving behavioral shifts, emerging trends can be seen when comparing between seemingly distinct regions. For instance, drivers in all three MSAs are generally shown to have spent more time at residential locations and less time in workplaces in the time period after the pandemic started. In addition, workplaces that may be incompatible with remote working, such as hospitals and certain retail locations, generally retained much of their pre-pandemic travel activity.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Predicting Biomass Yields of Advanced Switchgrass Cultivars for Bioenergy and Ecosystem Services Using Machine Learning

The production of advanced perennial bioenergy crops within marginal areas of the agricultural landscape is gaining interest due to its potential to sustainably produce feedstocks for biofuels and bioproducts while also improving the sustainability and resilience of commodity crop production. However, predicting the biomass yields of this production system is challenging because marginal areas are often relatively small and spread around agricultural fields and are typically associated with various abiotic conditions that limit crop production. Machine learning (ML) offers a viable solution as a biomass yield prediction tool because it is suited to predicting relationships with complex functional associations. The objectives of this study were to (1) evaluate the accuracy of commonly applied ML algorithms in agricultural applications for predicting the biomass yields of advanced switchgrass cultivars for bioenergy and ecosystem services and (2) determine the most important biomass yield predictors. Datasets on biomass yield, weather, land marginality, soil properties, and agronomic management were generated from three field study sites in two U.S. Midwest states (Illinois and Iowa) over three growing seasons. The ML algorithms evaluated in the study included random forests (RFs), gradient boosting machines (GBMs), artificial neural networks (ANNs), K-neighbors regressor (KNR), AdaBoost regressor (ABR), and partial least squares regression (PLSR). Coefficient of determination (R 2 ) and mean absolute error (MAE) were used to evaluate the predictive accuracy of the tested algorithms. Results showed that the ensemble methods, RF (R 2 = 0.86, MAE = 0.62 Mg/ha), GBM (R 2 = 0.88, MAE = 0.57 Mg/ha), and GBM (R 2 = 0.78, MAE = 0.66 Mg/ha), were the most accurate in predicting biomass yields of the Independence, Liberty, and Shawnee switchgrass cultivars, respectively. This is in agreement with similar studies that apply ML to multi-feature problems where traditional statistical methods are less applicable and datasets used were considered to be relatively small for ANNs. Consistent with previous studies on switchgrass, the most important predictors of biomass yield included average annual temperature, average growing season temperature, sum of the growing season precipitation, field slope, and elevation. This study helps pave the way for applying ML as a management tool for alternative bioenergy landscapes where understanding agronomic and environmental performance of a multifunctional cropping system seasonally and interannually at the sub-field scale is critical.

09 BIOMASS FUELS↗

Quantitative metrics for evaluating thermonuclear design codes and physics models applied to the National Ignition Campaign

In this study, physics models and design codes for hot dense plasmas undergoing thermonuclear burn are evaluated objectively using statistical metrics that compare the difference between calculations and data relative to the experimental uncertainties. The analysis is applied to the National Ignition Campaign (NIC) because it is relevant, comprehensive, and well documented. The statistics confirm that a key process afflicting NIC performance is mix driven by hydrodynamic instabilities as approximated here using the KL model [G. Dimonte and R. Tipton, Phys. Fluids 18, 085101 (2006)]. New physics models are also presented for instability-driven magnetic fields [B. Srinivasan et al., Phys. Rev. Lett. 108, 165002 (2012)] and the Coulomb logarithm for electron–ion thermal relaxation [G. Dimonte and J. Daligault, Phys. Rev. Lett. 101, 135001 (2008)]. The plasma-generated magnetic fields improve the agreement between code and data in a statistically significant manner by reducing the electron thermal conduction in the hot-spot via the Hall term. The Coulomb logarithm is presented in a numerically practical form that incorporates recent theoretical advances. However, it does not improve the agreement between the code and data because the thermal relaxation is so fast in non-ignited NIC plasmas that the typical 20% error does not change the tight coupling between electrons and ions. Even with these improved physics models, the one-dimensional simulations presented here are not able to describe the high-convergence NIC implosions in a statistically acceptable manner. Of the heroic multi-dimensional simulations of Clark et al. [Phys. Plasmas 23, 056302 (2016)], only those in three-dimensions satisfy the statistical acceptance criterion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Applied Risk Analysis for Guiding Homeland Security Policy

Risk analysis methods may be qualitative, semi-quantitative, or quantitative; adopt probabilistic and statistical theories; and implement concepts from core disciplines including operations research, reliability engineering, systems engineering, and applied mathematics. These methods continue to develop and evolve and have successfully been applied to address various homeland security mission challenges in recent years. The objective of this book is to: 1) highlight the role of risk analysis for informing homeland security policy decisions, and 2) describe case studies from academia, government, and industry that apply risk analysis methods for addressing challenges within each of the DHS missions.

national security, risk assessment, risk managemen↗

Concentration fluctuations and flammability of cryo-compressed hydrogen and methane jets

Compressed hydrogen stored at cryogenic temperatures has a much higher density than room-temperature storage, which enables large-scale hydrogen storage and transport. An understanding of the release of cryogenic hydrogen from pressurized vessels is needed to evaluate the risk and safety concerns with the use of this fuel. Here, the present work extends the analysis of previous experimental studies that measured the gas concentrations of cryo-compressed hydrogen jets and methane jets using a laser Raman scattering diagnostic system. Since the Raman signals are very small, a denoising algorithm was applied to significantly reduce the noise to enable statistical analysis of the data. The transient features of the turbulent jets were characterized by their concentration intermittencies and probability density functions (PDFs). A two-part PDF was developed to predict the bimodal features of the jet concentration distributions. Then, the flammability factors of the cryogenic jets were calculated based on the intermittency and the PDF.

33 ADVANCED PROPULSION SYSTEMS↗