Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analyses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Improvement of synoptic scale moisture and wind field analyses using the Nimbus 4 THIR 6.7 micron observations

The Nimbus 4 temperature-humidity infrared radiometer (THIR) monitors radiation in the 6.5 to 7.2 micron water vapor absorption with a 23 kilometer spatial resolution at the sub-satellite point. Radiation monitored in this spectral region results primarily from emission in the 250 to 500 millibar region of the upper troposphere. The THIR 6.7 micron observations are readily available in photofacsimile imagery form which shows very distinctive patterns associated with spatial variations in atmospheric water vapor. These radiometric observations were combined in several instances with moisture values measured in the upper troposphere by the standard radiosonde network. In each instance, the result is a much more consistent analysis showing increased spatial detail that agrees with the radiometric observations and does not compromise the conventional data. The improved moisture analyses show relatively dry and moist tongues that are very difficult or impossible to infer from the conventional data alone. The patterns in the moisture fields can be tracked over 12 and 24 hour periods. In addition, by keeping in mind the advective properties of the moisture field, success was achieved in improving streamline analyses at the 400 mb level over data sparse regions on a global scale.

Steranko, J.↗

Improvement of synoptic scale moisture and wind field analyses using the Nimbus 4 THIR 6.7-micron observations.

Discussion of some examples demonstrating that water vapor channel imagery from meteorological satellites, particularly Nimbus 4, can be quite helpful in improving moisture and wind analyses. Satellite imagery is shown to make possible the extrapolation of conventional measurements into data-sparse regions and the introduction of considerably greater detail into analyses of meterological parameters. In addition, the wide-area synoptic coverage of satellites can shed light on the interconnections of tropical and midlatitude systems discernible in the upper troposphere.

Steranka, J.↗

Preliminary organic analyses of the DSDP /JOIDES/ cores - Legs V-IX.

Descriptions of the methods used and results obtained in analyses of deep sea drilling cores. The analyses were performed in two phases (differing in degree of particularization) depending on the amount of core sample available. The results are presented in relation to the ages and to the fossil fauna and flora of the sediments.

Simoneit, B. R.↗

Multivariate analyses of crater parameters and the classification of craters

Multivariate analyses were performed on certain linear dimensions of six genetic types of craters. A total of 320 craters, consisting of laboratory fluidization craters, craters formed by chemical and nuclear explosives, terrestrial maars and other volcanic craters, and terrestrial meteorite impact craters, authenticated and probable, were analyzed in the first data set in terms of their mean rim crest diameter, mean interior relief, rim height, and mean exterior rim width. The second data set contained an additional 91 terrestrial craters of which 19 were of experimental percussive impact and 28 of volcanic collapse origin, and which was analyzed in terms of mean rim crest diameter, mean interior relief, and rim height. Principal component analyses were performed on the six genetic types of craters. Ninety per cent of the variation in the variables can be accounted for by two components. Ninety-nine per cent of the variation in the craters formed by chemical and nuclear explosives is explained by the first component alone.

Siegal, B. S.↗

Thermal design and analyses of Skylab multipurpose furnace and experiments

The Skylab multipurpose electric furnace was designed to accommodate eleven different materials processing experiments with their respective thermal requirements and constraints. Extensive prototype and ground-based tests were carried out and detailed thermal analyses were performed to ensure that these requirements and constraints are met. The basic features of the multipurpose electric furnace and the eleven experimental cartridges are outlined. The design and development problems encountered and the solutions to these problems are discussed. The analytical techniques used for thermal design and analyses are described.

Chi, J. W. H.↗

Comparison of NASTRAN and MITAS nonlinear thermal analyses of a convectively cooled structure

Comparative steady state nonlinear thermal analyses of a scramjet fuel injection strut are presented. The analyses were performed using the NASTRAN finite element program and MITAS, a lumped-parameter thermal analyzer. The strut is subjected to aerodynamic heating on two sides and is internally cooled by hydrogen flowing from internal manifolds through heat exchangers bonded to the primary structure. Based on coolant temperatures determined by MITAS, NASTRAN predicted temperature distributions throughout the strut which were in close agreement with similar MITAS predictions.

Thornton, E. A.↗

Manned systems utilization analysis (study 2.1). Volume 3: LOVES computer simulations, results, and analyses

The LOVES computer program was employed to analyze the geosynchronous portion of the NASA's 1973 automated satellite mission model from 1980 to 1990. The objectives of the analyses were: (1) to demonstrate the capability of the LOVES code to provide the depth and accuracy of data required to support the analyses; and (2) to tradeoff the concept of space servicing automated satellites composed of replaceable modules against the concept of replacing expendable satellites upon failure. The computer code proved to be an invaluable tool in analyzing the logistic requirements of the various test cases required in the tradeoff. It is indicated that the concept of space servicing offers the potential for substantial savings in the cost of operating automated satellite systems.

Stricker, L. T.↗

Requirements for implementation of Kuessner and Wagner indicial lift growth functions into the FLEXSTAB computer program system for use in dynamic loads analyses

General requirements for dynamic loads analyses are described. The indicial lift growth function unsteady subsonic aerodynamic representation is reviewed, and the FLEXSTAB CPS is evaluated with respect to these general requirements. The effects of residual flexibility techniques on dynamic loads analyses are also evaluated using a simple dynamic model.

Miller, R. D.↗

Summary of nozzle-exhaust plume flowfield analyses performed in support of space shuttle applications

Results are summarized of various analyses of the exhaust plumes of the space shuttle. Specific topics discussed included: the development of the two-phase plume flow field model, including finite rate chemistry and free molecular effects; analyses of exhaust plume simulation studies; verification of the analytical two-phase plume flow field model; and complete documentation of the two-phase plume computer code.

Smith, S. D.↗

EPA/ECLSS consumables analyses for the Spacelab 1 flight

The results of electrical power system (EPS) and environmental control/life support system (ECLSS) consumables analyses of the Spacelab 1 mission are presented. The analyses were performed to assess the capability of the orbiter systems to support the proposed mission and to establish the various non propulsive consumables requirements. The EPS analysis was performed using the shuttle electrical power system (SEPS) analysis computer program. The ECLSS analysis was performed using the shuttle environmental consumables requirements evaluation tool (SECRET) program.

Steines, G. J.↗

Convection sensitivity and thermal analyses for indium and indium-lead mixing experiment (74-18)

Sounding rocket Experiment 74-18 was designed to demonstrate the effects of the Black Brandt rocket acceleration levels (during the low-g coast phase of its flight) on the motion of a liquid metal system to assist in preflight design. Some post flight analyses were also conducted. Preflight studies consisted of heat transfer analysis and convection sensitivity and convection modeling analyses which aided in the: (1) final selection of fluid materials (indium-lead melts rather than paraffins); (2) design and timing of heater and quench system; and (3) preflight predictions of the degree of lead penetration into the pure indium segment of the fluid. Postflight studies involved: (1) updating the convection sensitivity calculations by utilizing actual flight gravity levels; and (2) modeling the mixing in the flight samples.

Bourgeois, S. V.↗

Structural analyses for the modification and verification of the Viking aeroshell

The Viking aeroshell is an extremely lightweight flexible shell structure that has undergone thorough buckling analyses in the course of its development. The analytical tools and modeling technique required to reveal the structural behavior are presented. Significant results are given which illustrate the complex failure modes not usually observed in simple models and analyses. Both shell-of-revolution analysis for the pressure loads and thermal loads during entry and a general shell analysis for concentrated tank loads during launch were used. In many cases fixes or alterations to the structure were required, and the role of the analytical results in determining these modifications is indicated.

Stephens, W. B.↗

Comparisons of several aerodynamic methods for application to dynamic loads analyses

The results of a study are presented in which the applicability at subsonic speeds of several aerodynamic methods for predicting dynamic gust loads on aircraft, including active control systems, was examined and compared. These aerodynamic methods varied from steady state to an advanced unsteady aerodynamic formulation. Brief descriptions of the structural and aerodynamic representations and of the motion and load equations are presented. Comparisons of numerical results achieved using the various aerodynamic methods are shown in detail. From these results, aerodynamic representations for dynamic gust analyses are identified. It was concluded that several aerodynamic methods are satisfactory for dynamic gust analyses of configurations having either controls fixed or active control systems that primarily affect the low frequency rigid body aircraft response.

Kroll, R. I.↗

Results of analyses performed on soil adjacent to penetrators emplaced into sediments at McCook, Nebraska, January 1976

During 1976 several penetrators (full and 0.58 scale) were dropped into a test site McCook, Nebraska. The McCook site was selected because it simulated penetration into wind-deposited sediments (silts and sands) on Martian plains. The physical and chemical modifications found in the sediment after the penetrators' impact are described. Laboratory analyses have shown mineralogical and elemental changes are produced in the sediment next to the penetrator. Optical microscopy studies of material next to the skin of the penetrator revealed a layer of glassy material about 75 microns thick. Elemental analysis of a 0-1-mm layer of sediment next to the penetrator revealed increased concentrations for Cr, Fe, Ni, Mo, and reduced concentrations for Mg, Al Si, P, K, and Ca. The Cr, Fe, Ni, and Mo were in fragments abraded from the penetrator. Mineralogical changes occurring in the sediment next to the penetrator included the introduction of micron-size grains of alpha iron and several hydrated iron oxide minerals. The newly formed silicate minerals include metastable phases of silica (cristobalite, lechatelierite, and opal). The glassy material was mostly opal which formed when the host minerals (mica, calcite, and clay) decomposed. In summary, contaminants introduced by the penetrator occur up to 2 mm away from the penetrator's skin. Although volatile elements do migrate and new minerals are formed during the destruction of host minerals in the sediment, no changes were observed beyond the 2-mm distance. The analyses indicate 0.58-scale penetrators do effectively simulate full-scale testing for soil modification effects.

Blanchard, M.↗

Numerical analyses for treating diffusion in single-, two- and three-phase binary alloy systems

Numerical solutions were applicable for planar, cylindrical, or spherical geometries with any diffusion-zone size and any continuous variation of the diffusion coefficient with concentration. Special techniques were included in the analyses to account for differences in molal volumes, initiation and growth of an intermediate phase, disappearance of a phase, and the presence of an initial composition profile in the specimen. A major improvement in solution accuracy was achieved in the two phase analysis by employing a mass conservation criterion to establish the location of the interface rather than the conventional interface-flux-balance criterion. In the three phase analysis, computation time was minimized without sacrificing solution accuracy by treating the three phase problem as a two phase problem when the thickness of the intermediate phase was less than a preset small value. Three computer codes were developed to perform these analyses.

Tenney, D. R.↗

Synoptic analyses, 5-, 2-, and 0.4-millibar surfaces for July 1974 through June 1976

Meteorological rocketsonde and satellite radiance data were employed for analyses of a continuing series of high altitude constant pressure charts. The methods of processing, the various types of data utilized and the analysis procedure are described. Broad-scale analyses of temperature and geopotential height for the Northern Hemisphere 5, 2, and 0.4 mb surfaces are presented for each week of the period July 1974 through June 1976. Brief discussions of the variations of the temperature and height fields throughout the two year period are also given.

Source record↗

A computer graphics program for general finite element analyses

Documentation for a computer graphics program for displays from general finite element analyses is presented. A general description of display options and detailed user instructions are given. Several plots made in structural, thermal and fluid finite element analyses are included to illustrate program options. Sample data files are given to illustrate use of the program.

Thornton, E. A.↗

Synoptic analyses, 5-, 2-, 1-, and 0.4-millibar surfaces for July 1976 through June 1977

Meteorological rocketsonde and satellite radiance data are employed for analyses of a continuing series of high-altitude constant-pressure charts. The automated methods of data processing and the objective analysis procedures are described. Broad-scale analyses of temperature and geopotential height for the Northern Hemisphere 5-, 2-, 1-, and 0.4-mb surfaces are presented for each week of the period July 1976 through June 1977. Brief discussions of the variations of the temperature and height fields throughout the period are also given.

Source record↗