Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wave wave interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Review of research on wave mean flow interactions using FGGE data

Comparison is made between the conventional Eulerian diagnostics of wave mean flow interactions in the atmosphere and the diagnostics introduced by Andrews and McIntyre (1976). In the latter, the meridional circulation is represented by a residual circulation, and the eddy torque in the zonal momentum equation by the Eliassen-Palm (1960) flux divergence (or equivalently, by the poleward eddy flux of geostrophic potential vorticity). It is found that, while the new diagnostics are useful in studying stratospheric warmings and transports of conservative quantities, the conventional diagnostics are more useful in studying global energetics and wave mean flow interactions in the troposphere and lower stratosphere. Case studies diagnosed with FGGE IIIb data are presented to illustrate this point. Kung and Tanaka's (1983) comparisons of the atmospheric energy cycle for SOP-1 and SOP-2, estimated with the use of the ECMWF and GFDL FGGE IIIb data bases, are used to assess the uncertainty in calculations of energetics based on the use of FGGE IIIb data. These results demonstrate the high degree of model dependence in the FGGE IIb data sets.

Pfeffer, R. L.↗

The interaction of SN1987A with its surroundings

The radio emission observed from SN 1987A can be interpreted as the result of the shock wave interaction with the wind from the blue supergiant progenitor star. There is now evidence at IR and UV wavelengths for the presence of dense circumstellar gas, which may be at a distance of about 10 to the 18th cm from the SN. If this interpretation is correct, the IR dust echo should remain at about constant luminosity for 1 to 2 years. The dense gas is probably the remnant of a dense wind from the progenitor star lost during an earlier red supergiant evolutionary phase. A search for luminous B stars with evidence of dense circumstellar gas at some distance from the star is warranted. The detection of light echoes formed by dust scattering in clouds near SN 1987A is promising. The echoes may appear as luminous overlapping annular regions with a size scale of order 1 arcmin or less.

Chevalier, R. A.↗

An LDA investigation of the normal shock wave boundary layer interaction

Nonintrusive measurements have been made of two normal shock wave-boundary layer interactions. Two-dimensional measurements were made throughout the interaction region while three-dimensional measurements were made in the vicinity of the shock wave. The measurements were made in the corner of the test section of a continuous flow supersonic wind tunnel in which a normal shock wave had been stabilized. LDA, surface pressure measurement and flow visualization techniques were employed for two freestream Mach number test cases: 1.6 and 1.3. The former contained separated flow regions and a system of shock waves. The latter was found to be far less complicated. The reported results define the flowfield structure in detail for each case.

Chriss, R. M.↗

Application of stability theory to laminar flow control - Progress and requirements

Paper briefly summarizes the current status of linear stability theory as applied to laminar flow control for aerodynamics. Results indicate that the conventional 'N factor' method of correlating stability theory and transition has a broad application range, including low- and high-speeds, two- and three-dimensional mean flow and TS, Gortler and crossflow disturbance modes. Linear theory is particularly applicable to the laminar flow control problem as, for system efficiency, control must be exercised and disturbances maintained in the linear regime. Current areas of concern for LFC, which require further stability theory research, include TS-crossflow interaction, combined disturbance fields (roughness, waviness, noise) and suction-induced disturbances. Some results on wave-interactions are presented.

Bushnell, D. M.↗

Turbulent Simulation of the Dynamics of the Magnetotail

In situ observations indicate that the dynamical processes in the geoplasma environment generally entail localized intermittent processes and anomalous global transports. It was suggested by T. Chang that instead of considering the turbulence as a mixture of interacting waves, such type of patchy intermittency could be more easily understood in terms of the development, interaction, merging, preferential acceleration and evolution of coherent magnetic structures. In this three-year project, we have used direct numerical MHD simulations to study some aspects of the MHD dynamics in Chang's model. Our large-scale numerical calculations and simulations have been supplemented by and coordinated with theoretical studies conducted by Chang and his colleagues.

Wu, Cheng-Chin↗

Guided Wave Delamination Detection and Quantification With Wavefield Data Analysis

Unexpected damage can occur in aerospace composites due to impact events or material stress during off-nominal loading events. In particular, laminated composites are susceptible to delamination damage due to weak transverse tensile and inter-laminar shear strengths. Developments of reliable and quantitative techniques to detect delamination damage in laminated composites are imperative for safe and functional optimally-designed next-generation composite structures. In this paper, we investigate guided wave interactions with delamination damage and develop quantification algorithms by using wavefield data analysis. The trapped guided waves in the delamination region are observed from the wavefield data and further quantitatively interpreted by using different wavenumber analysis methods. The frequency-wavenumber representation of the wavefield shows that new wavenumbers are present and correlate to trapped waves in the damage region. These new wavenumbers are used to detect and quantify the delamination damage through the wavenumber analysis, which can show how the wavenumber changes as a function of wave propagation distance. The location and spatial duration of the new wavenumbers can be identified, providing a useful means not only for detecting the presence of delamination damage but also allowing for estimation of the delamination size. Our method has been applied to detect and quantify real delamination damage with complex geometry (grown using a quasi-static indentation technique). The detection and quantification results show the location, size, and shape of the delamination damage.

Tian, Zhenhua↗

A Theoretical Basis for the Scaling Law of Broadband Shock Noise Intensity in Supersonic Jets

A theoretical basis for the scaling of broadband shock noise intensity In supersonic jets was formulated considering linear shock-shear wave interaction. Modeling of broadband shock noise with the aid of shock-turbulence interaction with special reference to linear theories is briefly reviewed. An hypothesis has been postulated that the peak angle of incidence (closer to the critical angle) for the shear wave primarily governs the generation of sound in the interaction process with the noise generation contribution from off-peak incident angles being relatively unimportant. The proposed hypothesis satisfactorily explains the well-known scaling law for the broadband shock-associated noise in supersonic jets.

Kandula, Max↗

Mitigation of Adverse Effects Caused by Shock Wave Boundary Layer Interactions Through Optimal Wall Shaping

It is known that the adverse effects of shock wave boundary layer interactions in high speed inlets include reduced total pressure recovery and highly distorted flow at the aerodynamic interface plane (AIP). This paper presents a design method for flow control which creates perturbations in geometry. These perturbations are tailored to change the flow structures in order to minimize shock wave boundary layer interactions (SWBLI) inside supersonic inlets. Optimizing the shape of two dimensional micro-size bumps is shown to be a very effective flow control method for two-dimensional SWBLI. In investigating the three dimensional SWBLI, a square duct is employed as a baseline. To investigate the mechanism whereby the geometric elements of the baseline, i.e. the bottom wall, the sidewall and the corner, exert influence on the flow's aerodynamic characteristics, each element is studied and optimized separately. It is found that arrays of micro-size bumps on the bottom wall of the duct have little effect in improving total pressure recovery though they are useful in suppressing the incipient separation in three-dimensional problems. Shaping sidewall geometry is effective in re-distributing flow on the side wall and results in a less distorted flow at the exit. Subsequently, a near 50% reduction in distortion is achieved. A simple change in corner geometry resulted in a 2.4% improvement in total pressure recovery.

Liou, May-Fun↗

Overdriven-detonation states produced by spherically diverging waves

A series of experiments are currently underway at the Detonation Science and Technology group, within Los Alamos National Laboratory, to study the overdriven-detonation states achievable in energetic materials as a result of detonation-wave interactions. A multi-component, energetic-material array was designed to study the amplification of velocity and pressure states produced by spherically diverging detonation waves in pentaerythritol tetranitrate (PETN) output charges. The unique geometry provides a low-jitter, highly controlled series of interactions between three independent-detonation inputs. Streak-camera imaging was performed on the output face of PETN pellets ranging in thickness from 2.5 – 10 mm to characterize the resulting breakout profile. Additionally, photonic Doppler velocimetry (PDV) measurements were collected at the output-pellet surface to determine simultaneity within the system. Detonation-wave velocities upwards of 16 mm/µs were measured, as compared to a steady-state detonation velocity of 7.9 mm/µs for the PETN pressing density investigated. Finally, additional experiments are being conducted to measure the pressure amplification generated at key areas of interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structure of shock wave-boundary layer interactions in transonic flow

The structure of transonic shock wave-boundary layer interactions is studied using asymptotic analyses, for an oblique shock impinging on a flat plate boundary layer. Solutions for unseparated laminar and turbulent boundary layers are reviewed, and incipient separation of a turbulent boundary layer is considered.

Adamson, T. C., Jr.↗

Some Effects of Tunnel Noise on Cylinder-Induced Mach 6 Transitional Shock Wave Boundary Layer Interactions

Experiments were conducted on a cylinder-induced shock wave boundary layer interaction (SBLI)as its state was brought through transition using a combination of boundary layer trips and Reynolds number sweep. A baseline case with no trips was also examined. The measurements were made in a Mach 6 freestream in the well-characterized Actively Controlled Expansion tunnel, which demonstrated a near tripling in fluctuation levels with unit Reynolds number increase from 3.0 to 3.5 million per meter. Surface oil flow and schlieren images suggested the jump in freestream noise served as the impetus for SBLI transition since the flow separation distance began to decrease as the Reynolds number progressed through those conditions. Likewise, surface mounted Kulite® pressure transducers indicated a rise in surface pressure fluctuations as well as initial growth in the instability responsible for transitioning the boundary layer within the interaction. Finally, heat transfer rates within the tripped SBLI were shown to be affected by the jump in freestream disturbance levels.

Andrew N Leidy↗

Plasma waves near Saturn: Initial results from Voyager 1

The Voyager 1 encounter with Saturn provided the first opportunity to investigate plasma wave interactions in the magnetosphere of Saturn. An overview of the principal results from the Voyager 1 plasma wave instrument is presented starting with the initial detection of Saturn and ending about four weeks after closest approach. A survey plot of the electric field intensities detected during the Saturn encounter is shown starting shortly before the inbound shock crossing and ending shortly after the outbound magnetopause crossing. Many intense waves were observed in the vicinity of Saturn. To provide a framework for presenting the observations, the results are discussed more or less according to the sequence in which the data were obtained.

Gurnett, D. A.↗

An Assessment of the Drag Models in the Case of a Shock Interacting With a Fixed Bed of Point Particles

Abstract In this work, three-dimensional Euler–Lagrange (EL) point-particle simulations of a shock wave interacting with a fixed bed of particles are carried out. The results from the particle-resolved (PR) simulations are used to assess the performance of the point-particle drag models during short time scales. We demonstrate that in a one-way coupled regime, the point-particle simulations recover the dominant gas dynamic features of the flow and are in a good agreement with the exact Riemann solution of a shock traveling through a sudden area contraction. Although the PR simulations are inviscid, we show that a dissipative drag is necessary to predict the mean behavior of the gas. As a model for the inviscid shock-induced (SI) drag two different models are presented in lieu of the quasi-steady drag. Finally, two-way coupled simulations are performed at four different particle volume fractions {0.10, 0.15, 0.20, 0.25} and three different incident shock Mach numbers {1.22, 1.66, 3.0} and compared against the data from PR inviscid simulations. At a lower Mach number (1.22), averaged flow quantities from the two-way coupled simulations agree well with the PR simulations. As the Mach number increases, we observe that the discrepancies between the point-particle and the PR simulations grow. A sensitivity analysis of the drag models involved reveals a strong influence of the inviscid-unsteady force on the gas quantities especially in the case of a strong shock interacting with a dense bed of particles. The use of Mach correlation beyond the subcritical regime coupled with the model for volume fraction correction is identified as a probable cause for the additional drag.

Engineering↗

FICH: Feature instability cavitation history [Slides]

We seek to improve our ability to predict and understand the Richtmyer-Meshkov (RM) unstable dynamics of explosively shocked isolated features interfaced with vacuum or gases, and an HE products cavity. Explosively shocked features form as 2D or 3D RM phenomena. Liquid cavitation cause cavitation bubbles when shockwaves collide, and cavitation waves from wave interactions with isolated features form that source mass into the RM unstable sheets or spikes, and the cavitation waves may slice through bulk material into the HE products cavity.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Comparative energetics diagnosis of the observed and simulated blockings in the Northern Hemisphere

The blocking phenomena, in particular winter blocking, are stuided using energetic diagnostics. Sequences of blockings during the FGGE winter and summer in observed and simulated circulations, and energy transformations associated with blockings are examined. It is observed that the simulation of the Northern Hemisphere circulation correlates better with the observed circulation during summer than during winter. It is noted that the observed winter blockings are maintained by the supply of kinetic energy to the ultralong waves from the shorter cyclone scales through nonlinear wave-wave interaction; in the simulated winter blocking, the energy converted at the cyclone scale cascades down to the shorter wave range; and the summer blockings are supported by the baroclinic conversion of long waves in both the observed and simulated circulations.

Kung, Ernest C.↗

A contribution to computer analysis of coupled-cavity traveling wave tubes

A flexible accurate large-signal computer program has been developed for the design of coupled-cavity traveling wave tubes. The program is written for a TSS-360 time sharing system. The beam is described by a disk model and the slow wave structure by a sequence of cavities or cells. The computational approach is arranged so that each cavity may have different geometrical or electrical parameters than its neighbors. This allows the program user to simulate a tube of almost arbitrary complexity. Input and output couplers, severs, complicated velocity tapers, and other features peculiar to one or a few cavities may be modeled by a correct choice of input data. The beam-wave interaction is handled by a new approach in which the RF fields are expanded in solutions to the TM wave equation retaining all significant space harmonics. The program was used to perform a design study of the TWT developed for the CTS satellite. Good agreement was obtained between the predictions of the program and the measured performance of the flight tube. The internal check on power balance was satisfied within plus or minus 0.2 per cent of input beam power.

Connolly, D. J.↗

Ring Current Electrodynamic Coupling

In this talk we will address the two primary issues of ring current (RC) electrodynamic coupling: 1. RC self-consistent coupling with electromagnetic ion cyclotron (EMIC) waves (small scale electrodynamic coupling); and 2. RC self-consistent magnetosphere-ionosphere coupling that includes calculation of the magnetospheric electric field (large scale electrodynamic coupling). Our study will be based on two RC models that we have recently developed in our group. The first model by Khazanov et al. [2002, 20031 couples the system of two kinetic equations: one equation which describes the RC ion dynamics and another equation which describes the energy density evolution of EMIC waves. The second model by Khazanov et al. [2003] deals with large scale electrodynamic coupling processes and provides a self-consistent simulation of RC ions, electrons and the magnetospheric electric field. There is presently no model that addresses both of these issues simultaneously in a self-consistent calculation. However, the need exists for such a model, because these two processes directly influence each other, with the mesoscale coupling changing the drift paths of the thermal and energetic particle populations in the inner magnetosphere, thereby changing the wave interactions, and the microscale coupling altering the pitch angle distributions and ionospheric conductivities (through increased precipitation), thus changing the field-aligned currents and electric potential structure. The initial thrust of the work will be the development of a combined kinetic model of micro- and meso-scale RC electrodynamic coupling processes and to examine their interactions with each other on a global scale. We also discuss the nonlinear coupling of EMIC and lower hybrid waves in the RC region during the May 2-7, 1998 storm period.

Khazanov, G. V.↗

Evidence for Oscillating Two-Stream Instability and Spatial Collapse of Langmuir Waves in a Solar Type II Radio Burst

We present the high time resolution in situ observations of Langmuir waves, likely excited by an electron beam accelerated by a coronal-mass ejection-driven super-critical quasi-perpendicular interplanetary shock into its upstream solar wind, which happens to be the source region of a solar type II radio burst. We show that (1) these waves occur as coherent localized magnetic-field-aligned, one-dimensional wave packets with durations of a few milliseconds and with peak intensities well in excess of the threshold for strong turbulence processes, (2) they provide what is believed to be the first evidence for: (a) the oscillating two-stream instability (OTSI) L(sub 1) + L(sub 2) S/⟶ U + D, where L(sub 1) and L(sub 2), U and D, and S are the pump Langmuir waves, up- and down-shifted side bands, and ion sound waves, respectively, (b) a three-wave interaction U + D ⟶ T(sub 2f(sub pe)), where T(sub 2f(sub pe)) is the second harmonic electromagnetic wave, (3) they satisfy the threshold condition for formation of collapsing solitons, and (4) they are accompanied by their ponderomotive force induced density cavities with δn(sub p)/n(sub e) > δn(sub b)/n(sub e), where δn(sub p)/n(sub e) is the level of ponderomotive force induced density fluctuations and δn(sub b)/n(sub e) is that of the ambient fluctuations. These findings strongly suggest that the observed wave packets provide evidence for the collapsing solitons formed as a result of OTSI. The implication is that the strong turbulence processes probably play very important roles in excitation of type II radio emissions as well as in stabilization of shock-accelerated electron beams.

Sun radio radiation↗