Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WIND PERFORMANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Design-Space Exploration for Inverse-Design of Wind Turbine Blades Using Data-Driven Methods

The state-of-the-practice aerodynamic design methods for wind turbine blades is typically based on Blade-Element Momentum (BEM) theory using a pre-designed frozen family of airfoils. The airfoils are themselves typically designed using panel methods. The design of the next-generation of large flexible rotors will need to capture the non-linear aerodynamics and three-dimensional flow to reduce the levelized cost of wind energy. Data-driven methods for aerodynamic design using data generated by computational fluid dynamics offer an attractive alternative to BEM-based methods that captures the non-linear aerodynamics of the component airfoils as well as the root and tip sections. In this work, we develop and demonstrate a framework to "smartly" explore the relevant design space in combination with an appropriate automated CFD pipeline to evaluate the aerodynamics of each design. The design-space exploration framework uses appropriate perturbations to the airfoil shape and induction profile from a baseline shape in combination with the inverse-design using BEM. The resulting designs are evaluated using an automated CFD pipeline using the in-house CFD solver framework "Mercury". We perform verification and validation to establish the capability of the Mercury framework to predict the aerodynamic performance of wind turbines. The CFD simulation of the perturbed blade shapes are optimized to restart from the converged baseline simulation to reduce the computational time. Finally, we demonstrate the design-space exploration technique for the design of the outboard section and the full rotor using perturbations to the shape and operating conditions of the NREL 5-MW turbine.

aerodynamic design methods↗

Performance Data from a Wind-Tunnel Test of Two Main-rotor Blade Designs for a Utility-Class Helicopter

An investigation was conducted in the NASA Langley Transonic Dynamics Tunnel to evaluate an advanced main rotor designed for use on a utility class helicopter, specifically the U.S. Army UH-60A Blackhawk. This rotor design incorporated advanced twist, airfoil cross sections, and geometric planform. For evaluation purposes, the current UH-60A main rotor was also tested and is referred to as the baseline blade set. A total of four blade sets were tested. One set of both the baseline and the advanced rotors were dynamically scaled to represent a full scale helicopter rotor blade design. The remaining advanced and baseline blade sets were not dynamically scaled so as to isolate the effects of structural elasticity. The investigation was conducted in hover and at rotor advance ratios ranging from 0.15 to 0.4 at a range of nominal test medium densities from 0.00238 to 0.009 slugs/cu ft. This range of densities, coupled with varying rotor lift and propulsive force, allowed for the simulation of several vehicle gross weight and density altitude combinations. Performance data are presented for all blade sets without analysis; however, cross referencing of data with flight condition may be useful to the analyst for validating aeroelastic theories and design methodologies as well as for evaluating advanced design parameters.

Singleton, Jeffrey D.↗

Coherent Doppler lidar signal covariance including wind shear and wind turbulence

The performance of coherent Doppler lidar is determined by the statistics of the coherent Doppler signal. The derivation and calculation of the covariance of the Doppler lidar signal is presented for random atmospheric wind fields with wind shear. The random component is described by a Kolmogorov turbulence spectrum. The signal parameters are clarified for a general coherent Doppler lidar system. There are two distinct physical regimes: one where the transmitted pulse determines the signal statistics and the other where the wind field dominates the signal statistics. The Doppler shift of the signal is identified in terms of the wind field and system parameters.

Frehlich, R. G.↗

Using Machine Learning to Create Turbine Performance Models (Presentation)

Wind turbine power output is known to be a strong function of wind speed, but is also affected by turbulence and shear. In this work, new aerostructural simulations of a generic 1.5 MW turbine are used to explore atmospheric influences on power output. Most significant is the hub height wind speed, followed by hub height turbulence intensity and then wind speed shear across the rotor disk. These simulation data are used to train regression trees that predict the turbine response for any combination of wind speed, turbulence intensity, and wind shear that might be expected at a turbine site. For a randomly selected atmospheric condition, the accuracy of the regression tree power predictions is three times higher than that of the traditional power curve methodology. The regression tree method can also be applied to turbine test data and used to predict turbine performance at a new site. No new data is required in comparison to the data that are usually collected for a wind resource assessment. Implementing the method requires turbine manufacturers to create a turbine regression tree model from test site data. Such an approach could significantly reduce bias in power predictions that arise because of different turbulence and shear at the new site, compared to the test site.

17 WIND ENERGY↗

Cross-scale modeling of storm surge, tide, and inundation in Mid-Atlantic Bight and New York City during Hurricane Sandy, 2012

Driven by high-resolution NAM (North America Mesoscale) and ECMWF (European Centre for Medium-Range Weather Forecasts) atmospheric fields, a 3-D unstructured grid SCHISM (Semi-implicit Cross-scale Hydroscience Integrated System Model) was applied to simulate total water level in the Mid-Atlantic Bight during Hurricane Sandy in 2012. The simulated storm surge, tide, significant wave height, and wave peak period results compared favorably with NOAA observations along US East Coast, Long Island Sound, and New York Harbor. The maximum total water level at The Battery in the New York Harbor was accurately simulated with an absolute error of less than 0.08 m (out of 2.9 m peak surge) and a timing difference less than 10 min, which includes the effects on the order of 0.1–0.3 m (5–10%) from the coastal setup induced by the surface waves. The scenario comparisons of (1) “NAM” versus “ECMWF”, (2) “2-D” versus “3-D”, and (3) “with” versus “without” wind wave model were examined. The 3-D barotropic model forced by ECMWF including the effects of wind waves performs the best, attributed to wave-induced radiation stress and reduction of bottom stress when the 3-D version is used. Simultaneously, the ELCIRC-Sub model, using a 5-m topography/bathymetry sub-grid and a regular 200-m resolution finite volume computational model grid, was developed to simulate the street-level inundation in New York City. The momentum and mass fluxes calculated by the coarser base grid model were effectively coupled with the sub-grid so that running a full-blown high-resolution base model is not required. The ELCIRC-Sub model uses MPI (Message Passing Interface) parallel computing to enlarge the coverage of the land surface and an efficient non-linear solver to improve the accuracy of the wetting-and-drying processes. The temporal comparisons of modeled water level with NOAA's tidal stations and USGS' rapid-deployed gauges showed overall performance with an average error of 0.1 m. Particularly, ELCIRC-Sub captured the profile of the highest peak surge (3.9 m), which rose 2 m within 3 hour at Kings Point, NY. The spatial comparisons of the modeled peak water level at 80 surveyed locations showed an average error less than 0.13 m. The modeled maximum inundation extent also matched well with an 80% hit rate against FEMA's Hurricane Sandy maximum flooding extent.

54 ENVIRONMENTAL SCIENCES↗

Parametrically Unstable Alfven-cyclotron Waves and Wave--Particle Interactions in the Solar Corona and Solar Wind

We consider the parametric instabilities of large-amplitude Alfven/ion-cyclotron waves and the consequent wave-particle interactions, and discuss their importance for modelling the evolution of ion velocity distribution functions in the tenuous and collisionless plasma of a coronal hole and the fast solar wind. We perform 1D hybrid simulations to study the nonlinear evolution of the parametric instabilities by analyzing the simulation results in terms of microinstabilities and discussing the influence of both Landau and cyclotron resonances on the evolution of the ion distributions. We demonstrate the origin of a relative drift between the protons and alpha particles, show the related anisotropic ion heating and follow the simultaneous proton beam formation. Finally, we focus on the development and evolution of both electromagnetic and acoustic micro-turbulence and present indications for an inverse energy cascade from shorter to longer wavelengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation Comparison of Wake Mitigation Control Strategies for a Two-Turbine Case

Wind turbines arranged in a wind plant impact each other through their wakes. Wind plant control is an active research field that attempts to improve wind plant performance by coordinating control of individual turbines to take into account these turbine–wake interactions. High-fidelity simulations of a two-turbine fully waked scenario are used to investigate several wake mitigation strategies, in this paper, including modification of yaw and tilt angles of an upstream turbine to induce wake skew, as well as repositioning of the downstream turbine. The simulation results are compared through change relative to a baseline operation in terms of overall power capture and loading on the upstream and downstream turbine. Results demonstrated improved power production for all methods. Moreover, analysis of control options, including individual pitch control, shows potential to minimize the increase of, or even reduce, turbine loads.

17 WIND ENERGY↗

The climatological distribution of extreme Arctic winds and implications for ocean and sea ice processes

Abstract Some of the strongest near‐surface winds on Earth form in the Arctic and sub‐Arctic due to intense midlatitude cyclones and mesoscale processes, and these strong surface winds have important impacts on ocean and sea ice processes. We examine the climatological distribution of over‐ocean, near‐surface wind speeds within a Pan‐Arctic domain for 18 years (1990–2007) in four gridded data sets: the European Centre for Medium‐Range Weather Forecasts Interim reanalysis (ERA‐I), the Climate Forecast System Reanalysis, version 2 of the Common Ocean‐Ice Reference Experiment data set, and a regional climate simulation generated using the Weather Research and Forecasting (WRF) model run at 50 km (WRF50) horizontal resolution with ERA Interim as lateral boundary conditions. We estimate probability density functions, the annual cycle, and map the 50th and 99th percentile winds. We then perform the same statistical analysis of winds for 2 years when 10 km WRF data are available (June 2005 to May 2007); despite the much shorter time period, the Pan‐Arctic statistics are very similar to those from the 18 year analysis. We repeat the wind speed statistical analysis within a subdomain surrounding Greenland and find that WRF10 has consistently larger maximum wind speeds, but this difference only appears at wind speed percentiles higher than 99%. Differences in the 99th percentile wind speeds are spatially heterogeneous. An investigation of surface fluxes within WRF50 and WRF10 reveals unrealistically large sensible heat fluxes along the sea ice edge, and the geographic distribution and magnitude of these fluxes is shown to be sensitive to sea ice representation in WRF.

Hughes, Mimi↗

Electronic Structure-Based Descriptors for Oxide Properties and Functions

The transition from fossil fuels to renewable energy requires the development of efficient and cost-effective energy storage technologies. A promising way forward is to harness the energy of intermittent renewable sources, such as solar and wind, to perform (electro)catalytic reactions to generate fuels, thus storing energy in the form of chemical bonds. Furthermore, current catalysts rely on the use of expensive, rare, or geographically localized elements, such as platinum. Widespread adoption of new (electro)catalytic technologies hinges on the discovery and development of materials containing earth-abundant elements, which can efficiently catalyze an array of (electro)chemical reactions.

Adsorption↗

Evaluation of Marine Boundary Layer Clouds Over the Northeast Pacific During the CSET Campaign in E3SM Version 2

It is still challenging to reproduce marine boundary layer (MBL) clouds well in large-scale models despite their importance to the Earth's radiation budget and hydrological cycle. This study evaluates representation of the MBL and clouds in the Energy Exascale Earth System Model (E3SM) version 2. This study compares the E3SM simulation results with remote sensing and reanalysis data during the Cloud System Evolution in the Trades (CSET) field campaign to better understand the stratocumulus-to-cumulus cloud transition (SCT) over the northeast Pacific. E3SM results are extracted along the CSET Lagrangian trajectories. The comparison shows that the E3SM simulation applying horizontal wind nudging performs well in reproducing thermodynamic variables of the MBL and evolution trends of cloud variables along the trajectories. However, substantial overestimations of aerosol and cloud drop number (N d ) are observed, which is explained as an issue with version 2 of the model. Cloud fraction (CF) does decrease from the Californian coast to Hawaii in the E3SM simulation, but most CF values indicate either an overcast or almost clear sky, which differs from satellite and reanalysis data. The effect of N d overestimation on CF evolution is assessed via prescribed-N d simulations. Those simulations with N d modifications show negligible CF changes. A comparison of estimated inversion strength (EIS) also shows that the simulated EIS values are similar to those of reanalysis data. Our study suggests that cloud macrophysics and boundary layer processes are more important in improving the simulation to capture the SCT than refining the model's thermodynamics or cloud microphysics.

Choi, Kyoung Ock [Univ. of Washington, Seattle, WA↗

WindView [SWR-18-51]

The National Laboratory of the Rockies (NLR) FKA: National Renewable Energy Laboratory (NREL) and Argonne National Laboratory (ANL) developed an open-source situational awareness and decision support platform called WindView that provides grid operators with knowledge on the state and performance of wind power on their system. University Texas Dallas is contracted by NLR to create a wind power forecaster that will be integrated into WindView. WindView does not provide any data, it is a visualization platform which requires the user to provide their own data. During the three year project, there has been collaboration with industry through technical review committees and specifically the Western Area Power Authority's, WAPA's Energy Training Power Center, EPTC to develop a production-level version of WindView which will work for industry.

Gamble, Christine↗

A study of fluid-structure interaction on overlapping grids with a focus on flexible beams

Fluid-structure interaction problems appear in many areas of science and engineering. Adequately understanding these problems is crucial to the study of such disciplines as aeroelastic flutter, wind turbine performance, implosions and explosions, and hemodynamics, to name a few. One technique to explore these problems is the use of numerical simulations. Although methods for the accurate and efficient numerical simulation of many problems involving only flexible structures or those involving only fluids have existed for a long time, the simulation of coupled problems, in which a flexible structure (or structures) interact with fluids remains challenging. The source of the difficulty with these problems is the construction of schemes for the coupling between the fluid and the solid that are both accurate and stable. There are two general approaches to designing a coupling procedure. In the first, the so-called monolithic approach, a single solver is implemented that handles both the fluid equations and the solid equations in a single framework. In this scheme, the solver handles the fluid and solid equations simultaneously, resulting in a strong coupling between the two. The second approach, named the partitioned approach, handles the fluid and structure domains separately. Whereas in the monolithic scheme there is a single solver for both the fluid and the structure, in the partitioned scheme there are separate solvers for the fluid and the structure. This separation heavily restricts the communication and coordination that can occur between the two solvers. Typically the only communication done in these schemes is through the application of boundary conditions (where the fluid applies a boundary condition on the fluid, and the solid one (or more) on the fluid). This makes the implementation of partitioned schemes easy, especially because they can take advantage of existing algorithms and software developed for the simulation of fluid flow or computational mechanics. However, they have a weakness – accuracy and stability are much harder to achieve. Stability is a particular problem for these schemes, as they are prone to the so-called added-mass effect.

97 MATHEMATICS AND COMPUTING↗

Preliminary Wind-Tunnel Investigation of the Performance of Republic F-105 Wing-Root Inlet Configurations at Various Angles of Attack and a Mach Number of 2.01

A 1/13-scale model of the forebody of the Republic F-105 with twin-duct wing-root inlets was tested in the Langley 4- by 4-foot supersonic pressure tunnel through a range of angle of attack from -4 deg to 15 deg at a Mach number of 2.01 and a Reynolds number of approximately 3.4 x 10(exp 6) per foot. The tests were made with four configurations which incorporated varying amounts of sweep and stagger of the inlet leading edges, modifications to the areas of the boundary-layer diverter floor plate, and modifications to the area of the boundary-layer diverter bleed slots. The highest overall pressure recovery at an angle of attack of 0 deg (average total-pressure recovery, 0.84 mass-flow ratio, 0.98) was achieved with configuration having an inlet leading-edge sweep angle of 58 deg with no leading-edge stagger. Stagger was found to improve the angle-of- attack performance, but at a sacrifice in inlet efficiency for an angle of attack of 0 deg. The boundary-layer diverter floor height, of the order of one boundary-layer thickness, was satisfactory for bypassing the fuselage boundary layer. The boundary-layer diverter-plate bleed slots were effective in increasing the total-pressure recovery of the inlet. The total-pressure-recovery contour plots, taken at the compressor-face station, indicate the existence of high-velocity "cores" throughout the inlet operating range.

Kouyoumjian, W. L.↗