Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WATER TABLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Observing Ice Sublimation From Water-Doped Lunar Simulant at Cryogenic Temperatures

NASA's Resource Prospector (RP) mission is intended to characterize the three-dimensional nature of volatiles in lunar polar and permanently shadowed regions. The Near-Infrared Volatile Spectrometer System (NIRVSS) observes while a drill penetrates to a maximum depth of 1 m. Any 10 cm increment of soil identified as containing water ice can be delivered to a heating crucible with the evolved gas delivered to a gas chromatograph / mass spectrometer. NIRVSS consists of two components; a spectrometer box (SB) and bracket assembly (BA), connected by two fiber optic cables. The SB contains separate short- and long-wavelength spectrometers, SW and LW respectively, that collectively span the 1600-3400 nm range. The BA contains an IR emitter (lamp), drill observation camera (DOC, 2048 x 2048 CMOS detector), 8 different wavelength LEDs, and a longwave calibration sensor (LCS) measuring the surface emissivity at four IR wavelengths. Tests of various RP sub-systems have been under-taken in a large cryo-vacuum chamber at Glenn Re-search Center. The chamber accommodates a tube (1.2 m high x 25.4 cm diameter) filled with lunar simulant, NU-LHT-3M, prepared with known abundances of water. Thermocouples are embedded at different depths, and also across the surface of the soil tube. In the chamber the tube is cooled with LN2 as the pressure is reduced to approx. 5-6x10(exp -6) Torr. For the May 2016 tests two soil tubes were prepared with initially 2.5 Wt.% water. The shroud surrounding the soil tube was held at different temperatures for each tube to simulate a warm and cold lunar environment. Table 1 provides a summary of experimental conditions and Figure 1 shows the nominal view of the NIRVSS components, the drill foot, and the top of the soil tube. Once the average soil temperature reached approx. 178 K, drilling commenced. During drilling activities NIRVSS was alternating between obtaining spectra and obtaining images. Here we discuss NIRVSS spectral data obtained during controlled drill percussions.

Roush, T. L.↗
DOE OSTI2023

Titanium dioxide and table sugar enhance the leaching of silver out of nanosilver packaging

We manufactured laboratory-scale food packages containing 2.57 ± 0.18 × 10 –3 wt% silver nanoparticles (AgNPs) and used them to show that table sugar (sucrose) and microcrystalline titanium dioxide (μTiO 2 ) enhance Ag migration from these packages and into aqueous food simulants. Ag migration into purified water was detected but was below the limit of ICP-MS quantitation, giving a range of potential Ag migration between 0.059 and 0.082 ng cm –2 packaging surface area. Ag migration into 9 wt% aqueous sucrose solution was 0.547 ± 0.084 ng cm –2 and migration into 9 wt% sucrose solution containing 0.01 wt% μTiO 2 was 0.724 ± 0.032 ng cm –2 . Total Ag migration into a 0.01 wt% μTiO 2 aqueous dispersion without sucrose was between 0.122 and 0.162 ng cm –2 , with upper and lower limits defined by the detectability of Ag in the supernatant phase of the simulant. If the midpoint of this range is taken as a baseline, these results imply that, compared to purified water, Ag migration was increased by approximately 10.3 times when the water simulant contained μTiO 2 and sucrose at commercially-relevant concentrations. Notably, the Ag migrated into water containing both ingredients exceeded the total Ag migrated into either of the single-ingredient simulants, pointing to a potential cooperative relationship between sucrose and μTiO 2 that possibly derives from binding and redox interactions between these two ingredients. Sucrose and μTiO 2 also both reduced a portion of migrated Ag + back into AgNPs, and μTiO 2 particles efficiently captured (>25% by mass) migrated Ag on their surfaces. Similar effects on migration were observed with nanocrystalline TiO 2 . Furthermore, these experiments are the first to show that TiO 2 particles exert a strong influence on the quantity and form of Ag that could migrate from AgNP-enabled packaging, suggesting that food formulations and interactions between individual food components may be important to consider when evaluating the fate of nanoparticles in these consumer applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Impact of Demographic Siting Criteria and Environmental Suitability on Land Availability for Nuclear Reactor Siting

The effect of population and certain environmental characteristics on the availability of land for siting nuclear power plants was assessed. The study area, consisting of the 48 contiguous states, was divided into 5 kilometer (km) square grid cells yielding a total of 600,000 cells. Through the use of a modern geographic information system, it was possible to provide a detailed analysis of a quite large area. Numerous maps and statistical tables were produced, the detail of which were limited only by available data. Evaluation issues included population density, restricted lands, seismic hardening, site preparation, water availability, and cost factors.

Hansen, K. L.↗
NASA NTRS1984

A redetermination of the succinonitrile-water phase diagram

The phase diagram of the water/succinonitrile system often used in modeling binary metallic alloys is determined experimentally using a laser scattering method. Triply distilled and zone-refined succinonitrile is placed in a jacketed water-cooled vessel with a magnetic mixer and a copper-constantan thermocouple, and the melting point is determined under vacuum and under Ar by observing the response of a photodiode placed opposite a laser source as the chamber is cooled and reheated. Then water is added, and the eutectic and monotectic temperatures and the entire phase diagram are determined under Ar. The results are presented in a table and graph and compared to those of Schreinemakers (1897): significant discrepancies are noted and attributed to impurities in the succinonitrile used by Schreinemakers. The importance of accurate phase diagrams for modeling binary alloys is stressed.

Smith, J. E., Jr.↗
NASA NTRS1983

Broadband transmission functions for atmospheric IR flux computations and climate studies

In order to reduce the size of precomputed tables which are used in the emissivity approach to computing IR radiation in a climate model, the three-dimensional transmission function in the water vapor bands is defined in this study by a simple regression equation consisting of three two-dimensional parameters. The transmittances in the 9.6 and 15 micron bands are individually parameterized as functions of the amount of scaled absorber. This approach can thus be applied to atmospheres with a variable CO2 concentration.

Chou, M.-D.↗
NASA NTRSDate not supplied

Sensitivity of Single-Scattering Properties to Precipitation Particle Meltwater Geometry for GPM Passive Microwave and Radar Remote Sensing Applications

The objective of the current work is to describe the microwave single-scattering properties of partially melted ice-phase precipitation particles using physically-based computational methods, taking into full account the varied geometries of the initially “dry” ice particles and the distributions of liquid water that develop during the melting process. Ultimately, the bulk properties of ensembles of these partially-melted particles will be included in “scattering tables” to support radar and combined radar-radiometer remote sensing of precipitation. A meshless Lagrangian melting procedure (snowMELT) based on smoothed-particle hydrodynamics is applied to both spherical and finely-structured ice particle models to describe the full evolution of the particles from dry ice particles to liquid drops. The melting of spherical ice particles using snowMELT is compared to an alternative continuum physics model to validate melt times and internal thermodynamics. The discrete dipole approximation is then utilized to calculate the single-scattering properties of different mixed-phase particles throughout the melting process. The sensitivities of particle single-scattering properties to thermodynamic and hydrodynamic assumptions in snowMELT are explored, and the implications for combined radar-radiometer precipitation remote sensing from GPM are discussed.

William S Olson↗
NASA NTRS2012

Validation of MIPAS IMK-IAA Temperature, Water Vapor, and Ozone Profiles with MOHAVE-2009 Campaign Measurements

MIPAS observations of temperature, water vapor, and ozone in October 2009 as derived with the scientific level-2 processor run by Karlsruhe Institute of Technology (KIT), Institute for Meteorology and Climate Research (IMK) and CSIC, Instituto de Astrofısica de Andalucıa (IAA) and retrieved from version 4.67 level-1b data have been compared to co-located field campaign observations obtained during the MOHAVE-2009 campaign at the Table Mountain Facility near Pasadena, California in October 2009. The MIPAS measurements were validated regarding any potential biases of the profiles, and with respect to their precision estimates. The MOHAVE-2009 measurement campaign provided measurements of atmospheric profiles of temperature, water vapor/relative humidity, and ozone from the ground to the mesosphere by a suite of instruments including radiosondes, ozonesondes, frost point hygrometers, lidars, microwave radiometers and Fourier transform infrared (FTIR) spectrometers. For MIPAS temperatures (version V4O_T_204), no significant bias was detected in the middle stratosphere; between 22 km and the tropopause MIPAS temperatures were found to be biased low by up to 2 K, while below the tropopause, they were found to be too high by the same amount. These findings confirm earlier comparisons of MIPAS temperatures to ECMWF data which revealed similar differences. Above 12 km up to 45 km, MIPAS water vapor (version V4O_H2O_203) is well within 10% of the data of all correlative instruments. The well-known dry bias of MIPAS water vapor above 50 km due to neglect of non-LTE effects in the current retrievals has been confirmed. Some instruments indicate that MIPAS water vapor might be biased high by 20 to 40% around 10 km (or 5 km below the tropopause), but a consistent picture from all comparisons could not be derived. MIPAS ozone (version V4O_O3_202) has a high bias of up to +0.9 ppmv around 37 km which is due to a non-identified continuum like radiance contribution. No further significant biases have been detected. Cross-comparison to co-located observations of other satellite instruments (Aura/MLS, ACE-FTS, AIRS) is provided as well.

MIPAS validation↗
DOE OSTI2024

Impacts of Sea‐Level Rise on Coastal Groundwater Table Simulated by an Earth System Model With a Land‐Ocean Coupling Scheme

Abstract Sea‐level rise (SLR) poses a severe threat to the coastal environment through seawater intrusion into freshwater aquifers. The rising groundwater table also exacerbates the risk of pluvial, fluvial, and groundwater flooding in coastal regions. However, current Earth system models (ESMs) commonly ignore the exchanges of water at the land‐ocean interface. To address this gap, we developed a novel land‐ocean hydrologic coupling scheme in a state‐of‐the‐science ESM, the Energy Exascale Earth System Model version 2 (E3SMv2). The new scheme includes the lateral exchange between seawater and groundwater and the vertical infiltration of seawater driven by the SLR‐induced inundation. Simulations were performed with the updated E3SMv2 for the global land‐ocean interface to assess the impacts of SLR on coastal groundwater under a high CO 2 emission scenario. By the middle of this century, seawater infiltration on the inundated areas will be the dominant component in the land‐ocean coupling process, while the lateral subsurface flow exchange will be much smaller. The SLR‐induced seawater infiltration will raise the groundwater levels, enhance evapotranspiration, and increase runoff with distinct spatial patterns globally in the future. Although the coupling process is induced by SLR, we found topography and warming temperature have more control on the coupling impacts, probably due to the relatively modest magnitude of SLR during the selected future period. Overall, our study suggests significant groundwater and seawater exchange at the land‐ocean interface, which needs to be considered in ESMs.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1984

Broadband water vapor transmission functions for atmospheric IR flux computations

Transmission functions associated with water vapor molecular line and e-type absorption in the IR spectra regions are presented in the form of simple analytical functions and small tables, from which atmospheric IR fluxes and cooling rates can be easily computed. For typical clear atmospheres ranging from the tropics to the subarctic region, the difference with respect to line-by-line calculations is less than 0.15 C/day in the cooling rate and approximately equal to or less than 1 percent in fluxes.

Chou, M.-D.↗
DOE OSTI2020

Groundwater Monitoring Report, U.S. Department of Energy Y-12 National Security Complex, Oak Ridge, Tennessee

This report contains the groundwater and surface water monitoring data obtained during calendar year (CY) 2019 at the U.S. Department of Energy (DOE) Y-12 National Security Complex (Y-12) on the DOE Oak Ridge Reservation (ORR) in Oak Ridge, Tennessee. The monitoring data were obtained from wells, springs, and surface water sampling locations in three hydrogeologic regimes at Y-12. The Bear Creek Hydrogeologic Regime (Bear Creek Regime) encompasses a section of Bear Creek Valley (BCV) between the west end of Y-12 and the west end of the Bear Creek Watershed (directions are in reference to the Y-12 grid system, shown as Plant North. The Upper East Fork Poplar Creek Hydrogeologic Regime (East Fork Regime) encompasses the Y-12 industrial facilities and support structures in BCV. The Chestnut Ridge Hydrogeologic Regime (Chestnut Ridge Regime) encompasses a section of Chestnut Ridge directly south of Y-12. Background information in Section 2 of this report outlines the hydrogeologic framework for groundwater and surface water quality monitoring at Y-12 and includes an overview of the groundwater contamination in each hydrogeologic regime. Section 3 provides details regarding the groundwater and surface water sampling and analysis activities implemented under the Y-12 GWPP, including sampling locations and frequency, sample collection and handling, field measurements and laboratory analytes, quality assurance (QA)/quality control (QC) sampling, data management, and data quality assessment (DQA). However, the equivalent QA/QC or DQA information for the groundwater and surface water data associated with the monitoring programs implemented by UCOR are not included in this report and instead are deferred to referenced programmatic plans and reports issued by OREM and UCOR. Section 4 of this report presents a summary evaluation of the CY 2019 monitoring data with regard to the respective objectives of surveillance monitoring and exit pathway/perimeter monitoring. The evaluation is based primarily on the analytical results for the following principal groundwater contaminants at Y-12: nitrate, uranium, gross alpha activity, gross beta activity, and volatile organic compounds (VOCs). Section 5 summarizes the most significant findings with respect to the principal contaminants along with recommendations for any proposed changes to the ongoing groundwater and surface water quality monitoring performed under the Y-12 GWPP. Technical reports and plans cited in the narrative sections of the report are listed in Section 6. Narrative sections of this report reference several appendices. Figures (maps and diagrams) and data tables (excluding data summary tables incorporated in the narrative sections) are in Appendix A and Appendix B, respectively. Appendix C contains construction details for each well sampled during CY 2019 by either the Y-12 GWPP or UCOR, along with schematic diagrams for wells equipped with Westbay™ multiport sampling equipment or Barcad® pump systems. Appendix D supports the background summary discussion in Section 2 and provides more detailed information about the hydrogeologic framework for groundwater and surface water monitoring at Y-12, including the primary sources of groundwater contamination in each hydrogeologic regime. Results for all field measurements and laboratory analyses obtained by the Y-12 GWPP and UCOR are presented in Appendix E, which also includes the sample numbers for the QA/QC samples associated with groundwater and surface water monitoring performed by the Y-12 GWPP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Nevada National Security Site - E-Tunnel Wastewater Disposal System: Fourth Quarter 2019

This report includes the results of monthly inspections and monitoring for October, November, and December 2019. Monthly inspections and monitoring were conducted on October 15, November 26, and December 18, 2019. Inspections include a visual assessment of the berms, ponding, water levels relative to the overflow pipes, tunneling or burrowing into the berms, soil conditions on and around the berms, erosion or sloughing of the slopes of the berms, seeps at the toe of the berms, deep-rooting botanicals on the berms, and fencing. Monthly monitoring includes measurements of the instantaneous flow rate, hydrogen ion activity (pH), and specific conductance of the E-Tunnel Wastewater Disposal System (ETDS) discharge. Annual sample results of the effluent water from the ETDS are also included in this report. The effluent sample was collected on September 11, 2019, and analyzed for the parameters listed in Table 1-B of Permit NEV 96021. In addition, Permit NEV 96021 requires the collection and analysis of representative groundwater samples from Well ER 12-1 every 24 months. This summary report provides the information pertaining to the sampling and analysis of groundwater samples collected on April 10, 2019.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2008

Detecting Phycocynanin-Pigmented Microbes in Reflected Light

A recently invented method of measuring concentrations of phycocynanin-pigmented algae and bacteria in water is based on measurement of the spectrum of reflected sunlight. When present in sufficiently high concentrations, phycocynanin-pigmented microorganisms can be hazardous to the health of humans who use, and of animals that depend on, an affected body of water. The present method is intended to satisfy a need for a rapid, convenient means of detecting hazardous concentrations of phycocynanin-pigmented microorganisms. Rapid detection will speed up the issuance of public health warnings and performance of corrective actions. The method involves the measurement of light reflected from a body of water in at least two, but preferably five wavelength bands. In one version of the method, the five wavelength bands are bands 1, 3, 4, 5, and 7 of the Thematic Mapper (TM) multispectral imaging instrument aboard the Landsat-7 satellite (see table). In principle, other wavelength bands indicative of phycocynanin could be used alternatively or in addition to these five. Moreover, although the method was originally intended specifically for processing Landsat- 7 TM data, it is equally applicable to processing of data from other satellite-borne instruments or from airborne, hand-held, buoy-mounted, tower-mounted, or otherwise mounted instruments that measure radiances of light reflected from water in the wavelength bands of interest.

Vincent, Robert K.↗
DOE OSTI2020

Oak Ridge National Laboratory Technical Input for the Nuclear Regulatory Commission Review of the 2017 Edition of ASME Section III, Division 5, ‘High Temperature Reactors’

To assist the Nuclear Regulatory Commission in its decision making on endorsement of the American Society for Mechanical Engineers Boiler and Pressure Vessel Code Section III, Division 5 (2017 Edition) for development of advanced non-light water reactors, the following Division 5 portions were reviewed: Article HBB-2000 Material; Article HCB-2000 Material; Article HGB-2000 Material; Mandatory Appendix HBB-I-14 Tables and Figures; and, Nonmandatory Appendix HBB-U Guidelines for Restricted Material Specifications to Improve Performance in Certain Service Applications. In addition to the 2017 Edition, the same parts of the 2019 Edition have also been reviewed as indicated in various sections of the report. This review was conducted by a collaboration of national laboratory and private sector participants with significant industrial experience, including some heavy lifting and deep diving from Clarus Consulting, LLC., all intended to achieve an objective, independent, and practical perspective. The report provides recommendations, descriptions of the evaluation methods, and the source references for the data used. To build confidence required for endorsement of the Code, this review was conducted as a verification and validation of the above Code contents. The objective of verification is to ensure that the Code is free of error – direct or implied; contains the information needed for its use, including proper coverage of the Code-specified materials for the intended application, and completeness and adequacy of references to other portions of the Code. The objective of validation is to authenticate that the Code tabulations and graphs represent design inputs consistent with what are determined using rules and methods specified by the Code. The authentication process used data that were assembled and/or generated independent of Code development, while the methods of analysis followed Code-specified methods where appropriate. The designated portions for this review cover the five alloys codified for high temperature reactor applications in Division 5, i.e. 316 SS, 304 SS, 800H, 2¼Cr-1Mo, and 9Cr-1Mo-V, regarding their general requirements, permitted specifications and design stress intensity values for pressure-retaining applications, deterioration in service, fatigue acceptance test, permissible weld materials, tensile and yield strength, expected minimum stress-to-rupture values (including for Alloy 718), weld stress rupture factors, permissible materials for bolting use, and restricted specifications in certain service applications. Additionally, stress intensity values for bolting materials including 316 SS, 304 SS and alloy 718 were reviewed. Analysis and discussion are also provided on contents outside of these designated Code portions where it was deemed relevant and necessary to develop a technically sound understanding of issues relating to the designated portions. Due to unavailability of sufficient test data on welds during the review period, the weld stress rupture factors in Tables HBB-I-10.14A to E, which cover a total of ten tables for the five alloys welded with twenty-eight different weld metals (some with similar properties), have been deferred to a future review effort. The review identified mainly two types of issues. The first type includes instances where the Code is found factually incomplete or incorrect, such as obsolete materials specifications listings, missing tabulation of stresses for bolting. Changes to the Code are recommended in these cases. The second type of issue includes instances where the Code tabulations and graphs are found to be less conservative than the review analysis results. In these cases, recommendations are made for further review and consideration where the difference in conservatism exceeds 10%, which is our threshold for questioning technical adequacy, meriting a risk assessment by the Nuclear Regulatory Commission and/or reactor designers. It is noted that this effort has been executed using all available data and established methods of analysis, including methods and criteria specified and used by the Code. As such, the findings that are presented in quantitative detail, in a format for convenient comparison with the Code, and with identification of where further review is recommended, should provide a sound technical basis for decisions about quantifying the implications of the reduced design margins and technical adequacy/inadequacy to form a basis for conditioning specific Code tabulation values on endorsement. Recommendations for specific changes to the Code, however, entail design conservatism considerations beyond the scope of this review effort, and are not made in this report.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1973

Application of ERTS-1 imagery in coastal studies

The basic ERTS output is four black-and-white photographs presenting the same scene recorded in each multispectral scanner band. Mosaics covering large regions at a 1:250,000 scale can be compiled from these photographs. Office study of the image of each band separately, in combination with other bands, and in conjunction with other available data (navigation charts, tide tables, etc.) permits extraction of data useful in coastal engineering planning and coastal processes studies. Specific examples in which significant information on regional shoreline configuration or nearshore water movements has been obtained from unenhanced ERTS imagery are: (1) tidal inlet configuration; (2) navigation information; and (3) nearshore water movements.

Magoon, O. T.↗
NASA NTRS1982

Aerial Infrared Photos for Citrus Growers

Handbook advises on benefits and methods of aerial photography with color infrared film. Interpretation of photographs is discussed in detail. Necessary equipment for interpretation is described--light table, magnifying lenses, and microfiche viewers, for example. Advice is given on rating tree condition; identifying effects of diseases, insects, and nematodes; and evaluating effects of soil, water, and weather.

Blazquez, C. H.↗
NASA NTRS1986

Universal amplitude ratios and the interfacial tension near consolute points of binary liquid mixtures

The interfacial tension of the binary liquid mixtures triethylamine/heavy water, triethylamine/water, and cyclohexane/methanol near their consolute temperatures is determined experimentally by measuring the densities of the phases and the capillary lengths. The results are presented in tables and graphs and compared with published data obtained by other methods and with theoretical predictions. The findings are shown to be in good agreement with previous experiments, confirming the discrepancy between temperature-independent universal amplitude ratios calculated from such data and those predicted by renormalization-group calculations or Monte Carlo simulations of Ising models.

Moldover, M. R.↗
NASA NTRS1987

Producing Low-Oxygen Samarium/Cobalt Magnet Alloy

Experiments aimed at producing SmCo5 alloy with low oxygen contamination described in report. Two methods of alloying by melting without contact with crucible walls tested. Lowest oxygen contamination, 70 parts per million achieved by dc arc melting on water-cooled, tantalum-clad copper hearth in purified quiescent argon atmosphere. Report includes photographs of equipment, photomicrographs of alloy samples, detailed descriptions of procedures tried, and tables of oxygen contamination and intrinsic coercivities of samples produced.

Das, Dilip K.↗
NASA NTRS2012

Thermal Performance Testing of EMU and OSS Liquid Cooling Garments

A test was conducted to evaluate three factors influencing the thermal performance of liquid cooling garments (LCG): (1) the comparable thermal performance of an Oceaneering developed engineering evaluation unit (EEU) prototype LDG, (2) the effect of the thermal comfort undergarment (TCU), and (3) the performance of a torso or upper body only LCG configuration. To evaluate the thermal performance of each configuration a metabolic test was conducted, utilizing suited subjects to generate the metabolic heat. For this study three (3) test subjects of similar health and weight produced a metabolic load on the LDG configuration by either resting (300-600 BTU/hr), walking at a slow pace (1200 BRU/hr), and walking at a brisk pace (2200 BTU/hr), as outlined in Figure 1, the metabolic profile. During the test, oxygen consumption, heart rate, relative humidity, air flow, inlet and outlet air pressure, inlet and outlet air temperature, delta air temperature, water flow (100 lb/hr), inlet water temperature (64 F), delta water temperature, water pressure, core body temperature, skin temperature, and sweat loss data was recorded. Four different test configurations were tested, with one configuration tested twice, as outlined in Table 1. The test was conducted with the suit subjects wearing the Demonstrator Suit, pressurized to vent pressure (approximately 0.5 psig). The demonstrator suit has an integrated ventilation duct system and was used to create a relevant environment with a captured ventilation return, an integrated vent tree, and thermal insulation from the environment.

Rhodes, Richard↗