Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAKEFULNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Design of a 3.4-MW wind turbine with integrated plasma actuator-based load control

Historically, cost reduction in wind energy has been accomplished by increasing hub heights and rotor diameters to capture more energy per turbine. The growth in rotor and turbine costs with increasing turbine sizes is also driven by the additional structure that must be added to withstand unsteady aerodynamic loads caused by turbulence, gusts, wind shear, misaligned yaw, upwind wakes, and the tower shadow. In this paper, we present a holistic design solution to integrate active load control using a controllable Gurney flap based on plasma actuators. We illustrate the design solution for a land-based 3.4-MW wind turbine rotor. Comparisons to a baseline reference 3.4-MW wind turbine show significant load reduction (15–18% DEL reduction for flap-wise blade root moments), rotor mass reduction (5–8%), and LCOE reduction (1.16–3.11%). To achieve these results, a comprehensive sequential-iterative design procedure is introduced to integrate the controllable Gurney flap into the turbine design and to drive the design solution toward the best LCOE reduction solution. Results are presented for mapping fatigue load reductions into cost reductions. In addition, an evaluation of active load control extended from Region-III to also include Region-II showed a further 34% reduction in DEL.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Influence of tower shadow on downwind flexible rotors: Field tests and simulations

Abstract As wind turbine rotors become larger, the blades become more flexible, requiring extra stiffness and cost to avoid the risk of tower strike. Wind turbines in a downwind configuration have a reduced risk of tower strike because the rotor thrust acts away from the tower. However, downwind blades pass through the wake of the tower, and the resulting load variation may contribute to blade fatigue. To date, there have been no field tests to quantify this tower shadow effect on unsteady blade moments. The present study reports on the first field testing of a flexible, downwind, coned rotor and compares the experimental data against simulations run in OpenFAST. The tower shadow effect is simulated using the conventional Powles model and a new Eames model (developed herein), which includes the influence of upstream turbulence. Both models reasonably predict the blade root out‐of‐plane bending moment data and the tower shadow dip magnitude when compared to field test data in Region 3. Tower shadow was found to increase the short‐term Damage Equivalent Loads (DELs) by less than 10% compared to other effects (gravity, shear, and turbulence), and the predictions were consistent with experiments. These results indicate that the tower shadow effect can be reasonably modeled with the simpler Powles model and that the tower shadow effect can be small compared to the effect of turbulence. However, long‐term fatigue due to tower shadow should be included in detailed structural analysis and design of the rotor and the tower.

Simpson, Juliet G.↗
DOE OSTI2022

Limitations of reanalysis data for wind power applications

Wind energy resource estimates commonly depend on simulated wind speed profiles generated by reanalysis or weather models due to the lack of long time series measurements with sufficient coverage at relevant heights (roughly 90 m above ground). However, modeled data, including reanalyses, can be noisy and display a wide range of biases and errors, variously attributed to terrain effects, poor coverage of assimilated inputs, and model resolution. Wind generation records, if available at high temporal and geographical resolution, can provide a proxy for wind measurements and allow for evaluation of reanalyses and weather model wind time series. We use a 7-year-long data set of hourly, plant-level generation records from over 100 wind plants across Texas to evaluate two commonly used reanalysis data sets (MERRA2 and ERA5). Additionally, we use 1-year of records (2019) to evaluate an operational, high-resolution regional weather modeling product (HRRR v3). We find that across the region, and across all modeling products, the modeled representation of wind generation (i.e., wind speeds at hub heights passed through a power curve) has relatively small mean errors when aggregated daily, but that accuracy and hourly correlation have a strong diurnal sensitivity. Accuracy and correlation systematically decline through the evening and markedly improve after sunrise. These diurnal patterns persist even in the highest resolution model tested (HRRR v3). We hypothesize the nighttime decline in accuracy is mostly due to poorly represented boundary layer conditions, perhaps related to model representation of stability, while other uncertainties (such as wake effects) play a secondary role.

17 WIND ENERGY↗
DOE OSTI2023

Wind turbine main bearing rating lives as determined by IEC 61400‐1 and ISO 281: A critical review and exploratory case study

Abstract This paper studies the rating lives of wind turbine main bearings, as determined by the IEC 61400‐1 and ISO 281 standards. A critical review of relevant bearing life theory and turbine design requirements is provided, including discussion on possible shortcomings such as the existence (or not) of the bearing fatigue load limit and the validity of assuming linear damage accumulation. A detailed exploratory case study is then undertaken to determine rating lives for two models of main bearing in a 1.5 MW wind turbine. Rating life assessment is carried out under different conditions, including various combinations of main bearing temperature, wind field characteristics, lubricant viscosity, and contamination levels. Rating lives are found to be sufficiently above the desired 20‐year design life for both bearing models under expected operating conditions. For the larger bearing, operational loads are shown to be below or close to the bearing fatigue load limit a vast majority of the time. Key sensitivities for rating life values are temperature and contamination. Overall, the results of this study suggest that an ISO 281 rating life assessment does not account for reported rates of main bearing failures in 1 to 3 MW wind turbines. It is recommended that a similar analysis be undertaken for ISO/TS 16281 rating lives, along with further efforts to identify principal root causes of main bearing failures in future work, possibly leading to a new application standard specific to this component. It is also recommended that the impacts of partial wake impingement on main bearing rating lives are investigated.

17 WIND ENERGY↗
DOE OSTI2025

AMR-Wind: A Performance-Portable, High-Fidelity Flow Solver for Wind Farm Simulations

We present AMR-Wind, a verified and validated high-fidelity computational-fluid-dynamics code for wind farm flows. AMR-Wind is a block-structured, adaptive-mesh, incompressible-flow solver that enables predictive simulations of the atmospheric boundary layer and wind plants. It is a highly scalable code designed for parallel high-performance computing with a specific focus on performance portability for current and future computing architectures, including graphical processing units (GPUs). In this paper, we detail the governing equations, the numerical methods, and the turbine models. Establishing a foundation for the correctness of the code, we present the results of formal verification and validation. The verification studies, which include a novel actuator line test case, indicate that AMR-Wind is spatially and temporally second-order accurate. The validation studies demonstrate that the key physics capabilities implemented in the code, including actuator disk models, actuator line models, turbulence models, and large eddy simulation (LES) models for atmospheric boundary layers, perform well in comparison to reference data from established computational tools and theory. We conclude with a demonstration simulation of a 12-turbine wind farm operating in a turbulent atmospheric boundary layer, detailing computational performance and realistic wake interactions.

17 WIND ENERGY↗
DOE OSTI2026

Sparsity Applications for Gradient‐Based Optimization of Wind Farms

Optimizing wind farms is essential for designing efficient energy systems, especially as farms grow larger and span multiple sites. However, this optimization becomes increasingly challenging due to the rising computational cost associated with more turbines. Gradient‐based optimization methods scale better than gradient‐free approaches for large problems, but the most computationally expensive component remains the calculation of gradients for the objective function and constraint Jacobians. To address this, we propose leveraging sparsity to accelerate gradient evaluations and reduce the size of the constraint Jacobian. Wind farms naturally exhibit sparsity—many turbines do not influence each other under certain wind directions. However, unlike traditional sparse problems with fixed patterns, wind farm sparsity is dynamic, requiring new strategies to handle changing interactions efficiently. This paper presents a study of sparsity in wind farm optimization and introduces several methods to exploit it. These strategies are tested on multiple farms using the analytic Cumulative Curl model, with gradients computed via automatic differentiation (AD). The same sparsity‐aware techniques are also applicable to finite difference (FD) methods, where they can yield even greater speedups due to the high cost of directional evaluations. Results show that sparse methods achieve up to a 10x speedup with less than ± 5% variance in optimized wake losses compared to traditional methods. These findings suggest that sparsity‐aware optimization not only maintains solution quality but also scales efficiently with farm size, enabling more comprehensive design exploration at reduced computational cost.

17 WIND ENERGY↗
DOE OSTI2020

Toward particle-resolved accuracy in Euler–Lagrange simulations of multiphase flow using machine learning and pairwise interaction extended point-particle (PIEP) approximation

This study presents two different machine learning approaches for the modeling of hydrodynamic force on particles in a particle-laden multiphase flow. Results from particle-resolved direct numerical simulations (PR-DNS) of flow over a random array of stationary particles for eight combinations of particle Reynolds number (Re) and volume fraction (φ) are used in the development of the models. The first approach follows a two-step process. In the first flow prediction step, the perturbation flow due to a particle is obtained as an axisymmetric superposable wake using linear regression. In the second force prediction step, the force on a particle is evaluated in terms of the perturbation flow induced by all its neighbors using the generalized Faxén form of the force expression. In the second approach, the force data on all the particles from the PR-DNS simulations are used to develop an artificial neural network (ANN) model for direct prediction of force on a particle. Due to the unavoidable limitation on the number of fully resolved particles in the PR-DNS simulations, direct force prediction with the ANN model tends to over-fit the data and performs poorly in the prediction of test data. In contrast, due to the millions of grid points used in the PR-DNS simulations, accurate flow prediction is possible, which then allows accurate prediction of particle force. This hybridization of multiphase physics and machine learning is particularly important, since it blends the strength of each, and the resulting pairwise interaction extended point-particle model cannot be developed by either physics or machine learning alone.

42 ENGINEERING↗
DOE OSTI2022

Physics-informed neural networks (PINNs) for fluid mechanics: a review

Despite the significant progress over the last 50 years in simulating flow problems using numerical discretization of the Navier–Stokes equations (NSE), we still cannot incorporate seamlessly noisy data into existing algorithms, mesh-generation is complex, and we cannot tackle high-dimensional problems governed by parametrized NSE. Moreover, solving inverse flow problems is often prohibitively expensive and requires complex and expensive formulations and new computer codes. Here, we review flow physics-informed learning, integrating seamlessly data and mathematical models, and implement them using physics-informed neural networks (PINNs). Here, we demonstrate the effectiveness of PINNs for inverse problems related to three-dimensional wake flows, supersonic flows, and biomedical flows.

42 ENGINEERING↗
DOE OSTI2023

Scavenging dynamics on Guam and implications for invasive species management

Deployment of mouse carcasses laced with acetaminophen has become a common management tool to control invasive brown tree snakes (Boiga irregularis; BTS) on Guam. Additionally, anticoagulant rodenticides may be used to control invasive rats (Rattus spp.) if their populations increase due to predator release in the wake of BTS eradication. However, there has been little research examining how scavengers on Guam could be incidentally exposed to toxicants by scavenging carcasses of animals that die from these population control strategies. Furthermore, there is a limited understanding of how the proliferation of invasive species on Guam has influenced the composition of the scavenger community. We investigated these topics by examining scavenger consumption of mouse, rat, and BTS carcasses on Guam in both a coastal and upland site during the wet (May–Aug 2016) and dry season (Jan–Apr 2017). We documented carcass consumption by 9 species, which scavenged 48% of carcasses. Interactions between season, habitat, and carcass type influenced probability of scavenging, and appeared to be driven by consumption by the two main scavenger species, BTS and cane toads (Rhinella marina), both of which are invasive on Guam. Baiting programs should consider the potential for toxin exposure to land crabs (Coenobita spp., Birgus latro), native species that scavenged at every combination of carcass type, habitat, and season. Altogether, 60% of scavenging events were attributed to species considered pests that are recent introductions to Guam. Invasive species on Guam are the primary scavengers of small vertebrate carrion, suggesting a substantial role in trophic dynamics that extends beyond predation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Chapter 9.12 - Weather, Climatic and Ecological Impacts of Onshore Wind Farms

Wind power is an environmentally sustainable technology that is likely to be part of the solution to the climate change, air pollution, and energy security problems. Despite many positive benefits, the rapid development of wind power has raised concerns about some potential adverse environmental impacts. While converting wind?s kinetic energy into electricity, wind turbines (WTs) modify properties of the atmospheric boundary layer (ABL) including the vertical profiles and surface-atmosphere exchanges of energy, momentum, mass, moisture, and trace gases. Given the current installed capacity and the projected installation worldwide, wind farms (WFs) are likely becoming a major driver of manmade land use change on Earth. Hence, understanding WT-atmosphere-surface interactions and assessing potential environmental impacts of WFs are of significant scientific, societal and economic importance. Here we review our progress in assessing potential impacts of onshore wind power on weather, climate and vegetation activity. A consensus is emerging based on observations and modeling studies that WFs cause a local to regional warming effect, particularly at nighttime, while the impacts on precipitation, wind patterns, crop yields and vegetation activity are uncertain. The warming effect results simply from vertical heat redistribution within the ABL due to turbine-enhanced vertical turbulent mixing in the wakes. At the global scale, with a substantial installation of WFs, mesoscale and climate models predicted large regional changes but small global impacts on temperature, while the impacts on precipitation, clouds, wind patterns and large-scale circulation have large uncertainties and are region specific and scale dependent. Despite increasing number of research efforts, our assessment of potential WF impacts is still very limited. Although the WF impacts are mostly local and limited to the near-surface ABL, this is the layer where we live and plants grow. Hence, more studies are needed to improve our understanding of WT-atmosphere-surface interactions and our capability to model and project the weather, climatic and ecological impacts of large WFs.

atmospheric boundary layer↗
DOE OSTI2025

Switching kinetics in ferroelectric zinc magnesium oxide thin films

The switching kinetics of RF-magnetron reactively sputtered ~200 nm thick Zn 1-x Mg x O (ZMO) ferroelectric thin films with x = 0.41 and x = 0.27 prepared on Pt/Ti/SiO 2 /Si substrates were studied at applied fields near the coercive fields, ranging from 3.4 to 5.1 MV cm -1 , and at temperatures ranging from room temperature to 100 °C. Polarization reversal in ZMO followss the Kolmogorov-Avrami-Ishibashi kinetics model for nucleation and growth at applied fields near the coercive field, and obeys an individual column switching (ICS) model at higher applied fields required to switch most of the spontaneous polarization. Switching in the high-applied field regime can be described using either the Gaussian or inverse gamma distribution functions depending on the mole fraction of magnesium in the film. The switching current transients of the high-Mg content ZMO film (x = 0.41) are always bi-modal, whereas the low Mg composition film (x = 0.27) is described by the Gaussian distribution initially following wake-up, and becomes bimodal with continued cycling. Rayleigh-like behavior of the dielectric constant revealed a simultaneous increase of the irreversible and decrease of the reversible contributions to the dielectric constant, which was ascribed to an increase in the density of mobile domain walls with cycling and resulted in faster switching.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Recent advances in hybrid metal oxide–zeolite catalysts for low-temperature selective catalytic reduction of NOx by ammonia

A hybrid catalytic system comprised of metal oxide and Cu or Fe exchanged zeolite components represents a potential advancement of state-of-the-art for selective catalytic reduction (SCR) of NOx by ammonia, including an elegant solution to the current challenge of improving the low-temperature efficiency of SCR catalysts. The idea is to enable in-situ NO oxidation over metal oxide component and concomitant fast SCR over zeolite component in the so-called “bifunctional mechanism”. This review is presented in the wake of growing interest in this innovative catalytic system. We begin this review by presenting key parameters that contribute to the synergy between metal oxide and zeolite components. Then, we discuss the materials selection for both components and their possible interactions in the system, followed by a summary of recent NH3-SCR investigations over multiple metal oxide–zeolite pairs and additional discussion on pairing techniques potentially explorable in upcoming studies. Finally, we end the review by providing the perspectives on future challenges in the development of this catalytic system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Life cycle analysis of dedicated energy crops for fuel production in the United States

Dedicated energy crops are promising feedstocks to make biofuels including jet fuels. This study applies life cycle analysis (LCA) to estimate direct well-to-wake (WTW) greenhouse gas (GHG) emissions (g CO 2 e/MJ) for jet fuel derived from five energy crops-biomass sorghum, miscanthus, switchgrass, poplar, and willow-via Fischer-Tropsch-to-Jet (FTJ) and Ethanol-to-Jet (ETJ) pathways. The WTW boundary includes direct emissions from biomass production, fuel production, and fuel combustion. The R&D GREET model is expanded to conduct the LCA, using national average biomass yields and farming inputs from the 2023 Billion-Ton Study. In addition, this study estimates emissions from market-mediated effects, including induced land-use change, induced other crop (non-feedstock) production changes, and induced livestock production changes using global economic and emissions factor models. On a per-dry U.S. ton basis, cultivation and harvest emissions are lowest for willow (51,565 g CO 2 e) and highest for biomass sorghum (104,488 g CO 2 e). Per-acre results show similarly high emissions for sorghum and lowest values for poplar and willow. Direct WTW emissions are substantially lower for FTJ (biomass sorghum: 5.5; miscanthus: 10.3; switchgrass: 11.7; poplar: 11.9; and willow: 8.7 g CO 2 e/MJ) than ETJ (33.2; 33.8; 34.8; 36.2; and 31.7 g CO 2 e/MJ, respectively). When market-mediated emissions are included, miscanthus exhibits the lowest total emissions across energy crop pathways. Although results are sensitive to modeling assumptions, they indicate that high-yielding perennial and woody crops, particularly when planted on marginal land, could significantly reduce WTW emissions for bio-jet fuels by combining low direct emissions with soil carbon gains and favorable market-mediated effects.

Billion-Ton Study↗
DOE OSTI2020

Characteristics of flow through randomly packed impermeable and permeable particles using pore resolved simulations

Pore resolved simulations are performed to study the mean flow characteristics in porous media formed by random distribution of impermeable and permeable particles. Here, permeability of the medium and reactive surface areas are analyzed for a range of solid fractions, packing patterns and flow rates. The results are compared with models presented in the literature and with simulations of flow through ordered packings. Permeability of a randomly packed porous medium is found to depend on the heterogeneous distribution of porosity which results from particle agglomeration and is typically ignored by simpler models. The reactive surface area is dependent on the flow field at pore scale in addition to geometry. Moreover, the wake formed downstream of the particles at moderately high flow rates also affects the reactive surface area. Similar analysis is also performed by assuming particles to be permeable to account for dual scale porosity relevant for various engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

ExaCA: A performance portable exascale cellular automata application for alloy solidification modeling

Modeling the as-solidified grain structures that form during alloy processing is a critical component in understanding process-property relationships, particularly for additive manufacturing (AM) where grain structure is very sensitive to processing conditions. While cellular automata (CA)-based models have proven able to predict aspects of microstructure for several alloys and AM process conditions, long run times and large resource sets required limit the utility and the problem size to which existing CA models can be applied. As part of the ExaAM project, an initiative within the Exascale Computing Project (ECP) to develop, test, and optimize an exascale-capable coupled and self-consistent model of AM parts, we developed ExaCA (https://github.com/LLNL/ExaCA) for the liquid–solid phase transformation in the wake of AM melt pools. The CA-based code is parallelized using MPI and the Kokkos programming model, the latter enabling simulation on both CPUs and GPUs within a single-source implementation. Here, we detail the steps taken to transform a baseline, MPI-based CA code into one that is performant on CPUs and GPUs. Performance testing of ExaCA on Summit (a pre-exascale machine at Oak Ridge National Laboratory) was used to quantify CPU–GPU speedup comparing with equal numbers of nodes. Testing showed comparable CPU performance to the MPI-only CA code and a 5-20x speedup when running AM-based test problems using GPUs. The improved performance of CA through GPU utilization and the performance portable nature of ExaCA will enable accurate part-scale modeling by harnessing the power of current and future generations of high performance computing resources. Future work will include improving the strong scaling of ExaCA on GPUs by reducing load imbalance associated with the locality of the problem, and continuing performance optimization across exascale hardware.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A quasi-static particle-in-cell algorithm based on an azimuthal Fourier decomposition for highly efficient simulations of plasma-based acceleration: QPAD

The three-dimensional (3D) quasi-static particle-in-cell (PIC) algorithm is a very efficient method for modeling short-pulse laser or relativistic charged particle beam–plasma interactions. In this algorithm, the plasma response, i.e., plasma wave wake, to a non-evolving laser or particle beam is calculated using a set of Maxwell’s equations based on the quasi-static approximate equations that exclude radiation. The plasma fields are then used to advance the laser or beam forward using a large time step. The algorithm is many orders of magnitude faster than a 3D fully explicit relativistic electromagnetic PIC algorithm. It has been shown to be capable to accurately model the evolution of lasers and particle beams in a variety of scenarios. Additionally, at the same time, an algorithm in which the fields, currents and Maxwell equations are decomposed into azimuthal harmonics has been shown to reduce the algorithmic complexity of a 3D explicit PIC algorithm to that of a 2D algorithm when the expansion is truncated while maintaining accuracy for problems with near azimuthal symmetry. This hybrid algorithm uses a PIC description in r–z and a gridless description in . We describe a novel method that combines the quasi-static and hybrid PIC methods. This algorithm expands the fields, charge and current density into azimuthal harmonics. A set of the quasi-static field equations is derived for each harmonic. The complex amplitudes of the fields are then solved using the finite difference method. The beam and plasma particles are advanced in Cartesian coordinates using the total fields. Details on how this algorithm was implemented using a similar workflow to an existing quasi-static code, QuickPIC, are presented. The new code is called QPAD for QuickPIC with Azimuthal Decomposition. Benchmarks and comparisons between a fully 3D explicit PIC code (OSIRIS), a full 3D quasi-static code (QuickPIC), and the new quasi-static PIC code with azimuthal decomposition (QPAD) are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Large eddy simulation of wind farm performance in horizontally and vertically staggered layouts

This numerical investigation employs Large Eddy Simulation (LES) coupled with Actuator Disk Model (ADM) to evaluate wind farm layout optimization strategies. The study presents a systematic analysis of aligned, horizontal staggering, vertical staggering, and mixed (combination of horizontal and vertical) staggering configurations, aiming to establish optimal design parameters for enhanced power production. The investigation examines key performance metrics including mean velocity distributions, turbulence intensity characteristics, and power generation efficiency. Results demonstrate better performance of both horizontal and vertical staggering patterns compared to conventional aligned configurations, with horizontal staggering exhibiting notably higher power output than vertical arrangements. Our findings also suggest that mixed configurations, incorporating both horizontal and vertical staggering, can offer optimal performance characteristics. As a result, this research advances the understanding of wake interactions in complex wind farm layouts and provides design guidelines for maximizing wind farm power generation efficiency through strategic turbine positioning.

17 WIND ENERGY↗
DOE OSTI2023

The effect of terrain-influenced winds on fire spread in QUIC-Fire

Here in this manuscript, we describe the implementation of the terrain-following version of QUIC-URB into QUIC-Fire and a demonstration of the impacts of terrain-influenced winds on QUIC-Fire-simulated fire spread. No changes to the underlying QUIC-Fire fire spread algorithm were made other than what was required to correctly account for the inclusion of terrain. This paper summarizes simulations used to understand how the QUIC-URB terrain-influenced winds affect upslope fire behavior without additional changes to the QUIC-Fire fire spread algorithm. Previously published FIRETEC results are compared to simulation results from the modified QUIC-Fire (incorporating terrain-influenced winds) that use the same topographies and fuels. QUIC-Fire results showed overall similar behaviors in terms of how the topographies affected fire shapes and trends in spread rates. Due to the terrain-following version of QUIC-URB being unable to generate flow separations at the crest of hills, fire spread rates in these regions across all non-flat topographies were over-predicted when compared to FIRETEC. Lateral fire growth showed similar trends with FIRETEC between topographies but did not capture the increase in spread due to a diagonal interface between grassland and forested fuel regions in the test domain. These simulations suggest possible refinements that are necessary to improve QUIC-Fire and thus guide ongoing efforts related to: how flame tilt angle is accounted for, the incorporation of non-local drag effects, and the inclusion of the wake-eddy parameterizations that are used in QUIC-URB.

54 ENVIRONMENTAL SCIENCES↗