Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Facet-Dependent Adsorption of Pb(II) on Hematite (001), (116), and (104) Surfaces

Hematite’s common (001) and (012) facets are frequently used in model studies of lead (Pb) adsorption behavior, but there is a lack of research on the high-energy facets, e.g. (104), present in nature. Also, few studies have attempted to connect the molecular details of facet-specific Pb adsorption to macroscopic uptake behavior. Here, to address these knowledge gaps, we investigated Pb(II) adsorption behaviors on facet-engineered hematite nanoparticles dominated by (001), (104), and (116). Adsorption experiments revealed significant variations in Pb(II) uptake among the three samples, with (001) demonstrating the highest capacity and (116) showing the best adsorption efficiency when normalized to specific surface area. Adsorption kinetics followed the pseudo-second-order model, indicating the adsorption process is governed mostly by chemisorption. Adsorption isotherms were well fitted by the Langmuir model, indicating uptake proceeds until roughly monolayer adsorption. Detailed characterization revealed Pb(II) was adsorbed as single atoms with complex inner-sphere binding modes that varied across different facets, indicating adsorption is both structurally and energetically facet-dependent. Co-adsorption experiments further demonstrated Cu 2+ , Zn 2+ , and humic acid significantly promoted Pb(II) adsorption. This study advances the understanding of hematite surface reactivity in controlling macroscopic wet adsorption behaviors, providing valuable insights into the environmental fate of Pb(II).

Contaminant removal↗
DOE OSTI2025

Organic Acid-Assisted Thermal Dehalogenation of Halide Salt Nuclear Wastes: From Waste Salts to Borosilicate Glass

Only a handful of high-halide salt waste forms have been demonstrated for vitrification-based immobilization strategies for halide-salt nuclear waste streams (e.g., pyroprocessing wastes, molten salt reactor wastes) and they all have low waste loading potential and most have low chemical durabilities for high-alkali streams. An alternative approach to direct salt immobilization is salt partitioning prior to waste form fabrication and one option for partitioning is halide removal (called dehalogenation). Removing the halogen fraction through dehalogenation can significantly reduce the waste volume required for disposal in the primary waste form. Furthermore, when dehalogenation is performed using organic acids, the dehalogenation reagent can decompose during high-temperature vitrification, reducing waste loading limitations in the waste form. In the current work, different organic acids (i.e., oxalic, formic, acetic, oxamic, and citric) were evaluated for dehalogenation efficiency of a simple chloride salt simulant (7.19% LaCl 3 , 53.77% LiCl, and 39.04% KCl, by mole) and a more complex chloride salt simulant called ERV3 (electrorefiner version 3) at 150 °C–300 °C and using H + /Cl – molar ratios of 1:1, 2:1, and 3:1. Additionally, a borosilicate glass waste form called TARS (or the average of refined specifications) was formulated, produced, and characterized for dehalogenated ERV3.

Amorphous materials↗
DOE OSTI2025

Real-Time Automated pH Control within Batch Processes Relying on Raman pH Measurement

Nuclear fission is an energy source that can provide consistent power with very low associated carbon emissions. However, management of the used nuclear fuel is an important aspect of the application of nuclear power. Recycling of useful components from used fuel is an attractive option, but this involves chemical processing of the fuel. Possible chemical separation technologies that might be used in this regard are sensitive to solution pH. Raman spectroscopy is a promising technique for monitoring the pH of solutions in real time. Classical pH probes are too fragile to be used in the harsh environments encountered in nuclear fuel processing. Raman probes are robust and can withstand these harsh environments to track pH. Coupled with chemometric analysis, the demonstration of the use of Raman spectroscopy to track and predict the pH in carboxylate-buffered systems is made possible. Utilizing this spectroscopy in conjunction with Programmable Logic Controllers mimics industrial control systems used in many modern industrial settings. This showcases a pragmatic approach toward leveraging Raman spectroscopy and chemometric model outputs as inputs for a real-time control system. The model to predict pH created by chemometrics proved to be successful in tracking pH. The optimal pH for TALSPEAK extraction of lanthanides and actinides from aqueous solution is known to proceed in a narrow pH range of around pH = 2.8 ± 0.1. This study uses Raman optical monitoring and automated control to return and maintain solution pH within this range after acid or base perturbations move the solution pH well outside this region. Root-mean-square errors show that pH changes measured using Raman spectroscopy on the batch process solution are reliably measured and used to automatically correct and maintain solution pH. Measurement of solution pH tracks favorably with electrochemical pH probe comparison measurements. As a result, the ability to showcase Raman spectroscopy paired with chemometrics analysis acts as a durable, better alternative data source compared to traditional pH probes to optimize the separation efficiency in the used nuclear fuel processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Assembled peptoid crystalline nanomaterials as carbonic anhydrase mimics for promoted hydration and sequestration of CO 2

Carbonic anhydrase (CA) mimics have received significant attention due to their promising applications in the enhanced hydration and sequestration of CO 2 . Herein, we report the assembly of sequence-defined peptoids into crystalline nanomaterials with controlled microenvironment of active sites as CA mimics for promoted hydration and sequestration of CO 2 . By incorporating specific ligands into self-assembling peptoids and coordinating these ligands with metal cations, we synthesize a variety of crystalline nanosheets and nanotubes as efficient CA mimics comparable to natural bovine CA. Molecular dynamics simulations reveal the critical roles of peptoid-Zn 2+ binding energy and the active site local microenvironment on the catalytic performance of these CA mimics. CO 2 precipitation results show that these CA mimics promote the hydration and sequestration of CO 2 while retaining high thermal and chemical stabilities. This study offers essential guidance for the future design of high-performance CA-mimics suitable for applications in CO 2 capture and sequestration.

Chakma, Progyateg [Pacific Northwest National Labo↗
DOE OSTI2026

Impact of solvent forces and broken symmetry on the assembly of designed proteins at a liquid-solid interface

The era of protein design has enabled the creation of hybrid protein-inorganic interfaces, leading to both surface-directed self-assembly of de novo protein architectures and protein-directed formation of inorganic materials. However, the resulting patterns of protein assembly are often unexpected, implying that essential interactions are not accounted for in current design platforms. Here, we use high-speed atomic force microscopy (AFM) analyzed through machine learning to follow the assembly of protein nanorods in aqueous electrolytes on two types of mica exhibiting disparate symmetry elements, which are imprinted on the overlying hydration structure. Using Monte Carlo simulations, we reproduce the observed phases and show that an observed smectic phase, previously thought to be unstable for non-interacting rods in two dimensions, emerges when crystal symmetry introduces a directional bias. The findings demonstrate the importance of incorporating solvent forces as modulated by the hydration structure inherent to interfacial systems when designing protein assemblies at liquid-crystal interfaces. Coupling physics-based simulations that can account for these factors to de novo protein design algorithms can lead to improved design platforms for bio-inspired, hybrid materials.

bioinspired materials↗
DOE OSTI2025

Recovery Simulator and Analysis Formulation: Mathematical Framework for Enhanced Resilience and Resource Allocation

This report introduces recovery simulator and analysis (RSA), a framework aimed at enhancing the resilience of electrical grids post-disruption. The RSA model leverages an optimization problem formulation that focuses on maximizing the load served (or optionally customers served) through a coordinated and cooptimized recovery of non-black start generation, transmission lines, feeders and substations subject to labor budget constraints. By integrating advanced linear programming techniques, the simulator selects efficient reocovery pathways, optimizing both short-term and long-term grid recovery strategies. The mathematical framework guides decision-making through a comprehensive evaluation of potential recovery actions, factoring in the trade-offs between labor constraints and load (or optionally customer) restoration efficacy. This enables grid operators to simulate diverse outage scenarios and delineate optimal recovery pathways, thereby prioritizing critical repair tasks and ensuring resource allocation is both economical and effective. The intended use case of RSA is to allow planners to explore many recovery scenarios quickly and determine assets most critical across a wide range of scenarios, and therefore strong candidates for hardening or additional investment. RSA might also be used in an operational setting, following a single event, for exploring efficient recovery pathways.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Current Best Practices on Wildfire Risk Reduction for Electric Transmission and Distribution Systems

This report provides a set of best practices in response to Section 4(d) of Executive Order 14308, Empowering Commonsense Wildfire Prevention and Response. The information contained herein is expected to be used in conjunction with other materials at the Federal Energy Regulatory Commission Wildfire Risk Mitigation Technical Conference (Docket No. AD25-16-000), with possible direction to the North American Electric Reliability Corporation to take action. The objective of this report is to provide an overview of existing and emerging best practices currently employed or planned by utilities for wildfire mitigation, demonstrating how these efforts align with the executive order’s emphasis on reducing electric utility–caused wildfires while also balancing cost-effectiveness. Additionally, while most practices in utility-developed wildfire mitigation plans focus on risk reduction through robustness and operational reliability, this report also discusses best practices for resilience. The best practices are adopted from publicly available utility wildfire mitigation plans from the United States and Canada, recent findings from wildfire risk reduction research, and industry engagement.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

MCPC Characterization Round 2

Characterization data for the MCPC LDRD Agile investment is collected in multiple rounds. Contained herein is data from Round 2 in which eleven distinct samples and one control sample are characterized by five modalities: EBSD, HARDNESS, OPTICAL, SEM, and ULTRASONIC. Data is organized in subdirectories for the five modalities and each one modality containing subdirectories for the datasets and other information.

316 stainless steel↗
DOE OSTI2025

MCPC Characterization Round 3

Characterization data for the MCPC LDRD Agile investment is collected in multiple rounds. Contained herein is data from Round 3 in which eleven distinct samples and one control sample are characterized by five modalities: EBSD, HARDNESS, OPTICAL, SEM, and ULTRASONIC. Data is organized in subdirectories for the five modalities and each one modality containing subdirectories for the datasets and other information.

316 stainless steel↗
DOE OSTI2025

Soil porous microstructure control over soil organic matter mobility: A multimethod workflow for understanding chemistry-dependent organic matter binding in soil

Soil organic matter (SOM) has attracted a great deal of interest; particularly for its potential to mitigate human derived CO 2 emissions. Studies have demonstrated that SOM plays a critical role in carbon storage and CO 2 sequestration. However, the sorption properties of SOM, which influence its transport in pore water and stabilization within the soil, remain poorly understood. This study develops a workflow to: (1) examine compound-specific advective and diffusive transport and desorption behaviors, (2) quantify desorption rates through stop-flow and continuous-flow column experiments, and (3) evaluate the impact of soil microporosity on SOM mobility using high-resolution imaging and extractions. Intact core column experiments were conducted on Uncultivated (Natural) and Cultivated soil samples, both were arid soils, collected in Washington State. X-ray computed tomography was employed to measure porosity and pore connectivity, while Fourier-transform ion cyclotron resonance mass spectrometry was used to analyze SOM composition. The findings revealed that cultivation increased total carbon and nitrogen levels due to irrigation and fertilization, enhancing carbon capture potential in arid soils. In contrast, the Natural soil, characterized by higher porosity and connectivity, contained more oxidized carbon. Pore network analysis indicated that soil compaction in the Cultivated soil may lead to longer diffusion pathways, significantly influencing SOM transport and stability.

Hydraulic Properties↗
DOE OSTI2025

Meshfree simulation and prediction of recrystallized grain size in friction stir processed 316L stainless steel

Friction stir processing (FSP) is a promising solid-phase microstructural modification technique that can repair and enhance damaged stainless steel surfaces exposed to harsh environments. The quality of the repaired material is closely correlated to the recrystallized grain size in the stir zone (SZ), which is influenced by the thermomechanical conditions dictated by FSP process parameters. Thus, establishing a reliable relationship between these parameters and recrystallized grain size in the SZ is crucial for optimizing repair quality. However, existing experimental approaches often rely on indirect temperatures measured far from the SZ, along with rough strain rate estimations, which are imprecise and time-consuming. Meanwhile, existing mesh-based modeling methods usually face numerical challenges when dealing with the large material deformations inherent in FSP. Here, to address these issues, this study introduces a meshfree process model for FSP based on the smoothed particle hydrodynamics (SPH) method, aimed at predicting process conditions under different parameters. The model is validated using experimental data from 11 combinations of tool traverse and rotation speeds on 316 L stainless steel. Correlations between process parameters, material flow, temperature, strain, strain rate, and recrystallized grain size are revealed through SPH simulations and electron backscatter diffraction (EBSD) imaging. The results show that in situ SZ temperatures range from 1071 to 1322°C, which exceed the tool temperature by over 300°C. Furthermore, SZ temperature, strain rate, and grain size increase monotonically with higher tool temperature and faster traverse speed. A relationship is then established between the model-predicted Zener-Hollomon parameter and the recrystallized grain size based on EBSD data, expressed as ln(d) = -0.364 ln(Z) + 14.673. Finally, this relationship exhibits satisfactory accuracy with errors of less than 26.9% in predicting grain sizes at various SZ locations, which offers valuable insights for optimizing FSP repair processes for 316 L stainless steel.

316L stainless steel↗
DOE OSTI2025

Direct observation of key aluminum hydroxide prenucleation oligomers for gibbsite nucleation and crystallization in sodium aluminate solution by liquid ToF-SIMS

The mechanism of gibbsite (aluminum hydroxide) crystallization from highly alkaline solutions such as Bayer liquors remains poorly understood, where aluminum (Al) transforms from largely tetrahedrally coordinated aluminate monomers in sodium aluminate solutions into a network of octahedra in gibbsite crystals. A variety of traditional analytical approaches applied to this system do not readily reveal the presence of higher-order oligomeric intermediates. To overcome this limitation, we employed in-situ liquid Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) to examine the Al species present in concentrated sodium aluminate solutions favoring crystallization of gibbsite or sodium aluminate. A complex mixture of Al oligomers was found. By comparing the change in the relative concentration of Al oligomers with +1 and -1 charge, we were able to identify three major Al oligomer candidates, iso-tetramers, iso-pentamers, and cyclic-hexamers, for the nucleation and crystallization of gibbsite. The concentrations of iso-tetramers and iso-pentamers significantly surpass those of cyclic-hexamers. Time-dependent in-situ Raman spectroscopy analysis indicated that the appearance of gibbsite coincided with the peak concentration of these oligomers. The Density-functional theory (DFT) calculation suggests that the formation of iso-oligomers is more favorable than that of cyclic-hexamers. The combined results suggest that iso-tetramers and iso-pentamers play the most substantial role in the nucleation and growth of gibbsite in the sodium aluminate solutions. Our findings also suggest that the oligomers that promote gibbsite crystallization are more stable in dilute sodium aluminate solutions, making these solutions particularly suitable for efficient gibbsite crystallization. In conclusion, our study fills a major knowledge gap in understanding Al speciation that leads to the nucleation and crystallization of gibbsite in concentrated sodium aluminate solutions.

Bayer liquor↗
DOE OSTI2025

Tuning Molecular Interactions between Peptoids and Substrates to Achieve Surface-Agnostic Coating

Achieving programmable and robust coatings that maintain functionality while adhering to various surface types with molecular-level tunability and programmable features remains challenging. In this study, we develop adaptable and stable surface-agnostic coatings (SACs) based on crystalline peptoid membranes by tuning interpeptoid and peptoid-substrate interactions. We utilize two complementary methods: (1) surfaceinduced assembly, where peptoid membranes form directly on substrates, and (2) depositing preformed peptoid crystalline membranes via an aqueous layer-by-layer (LbL) assembly technique. These strategies are applied to substrates with diverse surface chemistries and topographies, including mica, highly ordered pyrolytic graphite (HOPG), MoS 2 , sapphire, and porous membranes like porous alumina and polysulfide. Atomic force microscopy confirms the formation of peptoid coatings and reveals differences in assembly behavior across surfaces. Moisture vapor transport measurements serve as a proof-of-concept test for membrane continuity and tunable permeance. Together, these findings demonstrate the adaptability and programmability of peptoid-based SACs, enabling rational coating design on surfaces with diverse chemical and topographical features. Furthermore, this work opens pathways for using peptoid membranes as programmable surface modifiers in functional interfaces, protective coatings, and membrane platforms.

biomimetic polymers↗
DOE OSTI2026

The Energy Exascale Earth System Model Version 3: 2. Overview of the Coupled System

The Energy Exascale Earth System Model version 3 (E3SMv3) represents the latest advancement in Earth system modeling developed by the U.S. Department of Energy (DOE). Building upon previous versions, E3SMv3 introduces significant updates across its coupled components to enhance capability and improve fidelity. The atmosphere component incorporates advancements in chemistry, aerosol-cloud interactions, convection, and microphysics. The ocean features a new time-stepping scheme and a higher-resolution unstructured mesh with sub-ice-shelf cavities, while the sea ice model integrates advanced snow and ice physics for more realistic cryospheric simulations. The land model introduces prognostic vegetation dynamics and a new sub-grid topographic treatment of solar radiation. A new tri-grid configuration harmonizes the horizontal grids of the land and river components for improved process coupling. It is enabled by a new non-linear remapping between the atmosphere and land. E3SMv3 underwent extensive testing through a comprehensive simulation campaign, including pre-industrial control, idealized CO 2 experiments, and historical simulations spanning 1850–2024. The model demonstrates significant improvements in simulating the evolution of the historical surface temperature, particularly addressing the “pothole cooling” bias in earlier versions. Reduced aerosol-related forcing contributes to more realistic radiative forcing and better alignment with the observational record. Ocean heat content (OHC) and sea ice trends are also improved as a result.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Design of facilitated dissociation enables timing of cytokine signalling

Protein design has focused on the design of ground states, ensuring that they are sufficiently low energy to be highly populated. Designing the kinetics and dynamics of a system requires, in addition, the design of excited states that are traversed in transitions from one low-lying state to another. This is a challenging task because such states must be sufficiently strained to be poorly populated, but not so strained that they are not populated at all, and because protein design methods have focused on generating near-ideal structures. Here we describe a general approach for designing systems that use an induced-fit power stroke to generate a structurally frustrated and strained excited state, allosterically driving protein complex dissociation. X-ray crystallography, double electron–electron resonance spectroscopy and kinetic binding measurements show that incorporating excited states enables the design of effector-induced increases in dissociation rates as high as 5,700-fold. We highlight the power of this approach by designing rapid biosensors, kinetically controlled circuits and cytokine mimics that can be dissociated from their receptors within seconds, enabling dissection of the temporal dynamics of interleukin-2 signalling.

deformation dynamics↗
DOE OSTI2025

A Trichomonas vaginalis C2-XYPPX-repeat protein with a structured C2 domain displaying dampened flexibility upon binding calcium

C2 domains are ubiquitous membrane-binding modules of ∼130 residues in eukaryotes that are often associated with proteins involved in membrane trafficking and lipid modification. The genome of Trichomonas vaginalis, the most common, non-viral, sexually transmitted human pathogen, encodes eight genes that contain a N-terminal C2 module linked to a XYPPX-repeat domain of more than four XYPPX repeats (C2-XYPPX). While the function of the XYPPX-repeat domain remains unknown, its multiple association with C2 domains in T. vaginalis suggests it is important. Here, the C2 domain from one of these C2-XYPPX-repeat proteins, Tv-C2-1, was structurally and physically characterized using X-ray crystallography and NMR spectroscopy. The crystal structure for Tv-C2-1 shows that this domain shares a fold common to all C2 domains, a compact Greek-key motif composed of eight anti-parallel β-strands in the type-2 topology. An NMR chemical shift perturbation study with Ca 2+ showed that Tv-C2-1 bound two Ca 2+ atoms primarily via two loops (loop-1 and loop-3) on the predicted calcium binding face of the protein with K d s of 58.0 ± 0.1 μM and 232 ± 6 μM. Estimations of the overall rotational correlation time, τ c , in the apo (11.1 ns) and Ca 2+ -bound (9.2 ns) state suggests the protein becomes more compact upon Ca 2+ binding, consistent with a decrease in dynamics in loop-3 and marginally in loop-1 suggested by amide 15 N heteronuclear steady-state { 1 H}- 15 N NOEs. Showing Tv-C2-1 binds calcium and adopts a compact Greek-key motif structure, two primary features of C2 domains, suggests understanding the function of the XYPPX-repeat domain may be warranted.

NMR spectroscopy↗
DOE OSTI2024

Critical mineral substitutions in IN617: A combined computational and experimental approach to performance evaluation and feasibility

Addressing the escalating demand for critical minerals (CMs) driven by global climate change initiatives, this study explores compositional modifications to Inconel 617 (IN617) by substituting cobalt (Co) with manganese (Mn) across various atomic percentages. Here, we conducted a computational feasibility study employing Molecular Dynamics (MD) simulations to provide strategic guidance for experimental validation. The simulations analyzed tensile strength and corrosion resistance for five modified compositions (M1 to M5) to identify optimal properties. Tensile tests on cubic simulation cells were performed to generate stress-strain curves, revealing the impact of Co replacement with Mn on tensile strength—a metric correlated with hardness. Oxygen penetration simulations were conducted to evaluate corrosion resistance, indicating that reduced oxygen penetration depth corresponds to enhanced resistance. Promising compositions underwent phase diagram calculations for assessing phase stability. The optimal composition (M1), characterized by high tensile strength and minimal oxygen penetration, was chosen for experimental validation using induction melting and friction stir consolidation techniques. The materials were further characterized using SEM-EDS, XRD, and Vickers hardness testing. Our findings suggest that Mn substitution in IN617 can yield mechanical performance at par with high-Co alloys in energy-critical applications.

36 MATERIALS SCIENCE↗