Results for “Validated Models” — Page 25

NASA NTRS2004

Demonstration of a 10-m Solar Sail System

The NASA In-Space Propulsion (ISP) program has been sponsoring system design development and hardware demonstration activities of solar sail technology over the past 16 months. Efforts to validate by test a moderate-scale (10-m) 1/4 symmetry ground demonstration sail system are nearly complete. Results of testing and analytical model validation of component and assembly functional, strength, stiffness, shape, and dynamic behavior are discussed.

Murphy, David M.↗

NASA NTRS2008

Estimating the Need for Medical Intervention due to Sleep Disruption on the International Space Station

During ISS and shuttle missions, difficulties with sleep affect more than half of all US crews. Mitigation strategies to help astronauts cope with the challenges of disrupted sleep patterns can negatively impact both mission planning and vehicle design. The methods for addressing known detrimental impacts for some mission scenarios may have a substantial impact on vehicle specific consumable mass or volume or on the mission timeline. As part of the Integrated Medical Model (IMM) task, NASA Glenn Research Center is leading the development of a Monte Carlo based forecasting tool designed to determine the consumables required to address risks related to sleep disruption. The model currently focuses on the International Space Station and uses an algorithm that assembles representative mission schedules and feeds this into a well validated model that predicts relative levels of performance, and need for sleep (SAFTE Model, IBR Inc). Correlation of the resulting output to self-diagnosed needs for hypnotics, stimulants, and other pharmaceutical countermeasures, allows prediction of pharmaceutical use and the uncertainty of the specified prediction. This paper outlines a conceptual model for determining a rate of pharmaceutical utilization that can be used in the IMM model for comparison and optimization of mitigation methods with respect to all other significant medical needs and interventions.

Myers, Jerry G.↗

NASA NTRS2017

Models of Sector Flows Under Local, Regional and Airport Weather Constraints

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Kulkarni, Deepak↗

NASA NTRS2017

Models of Sector Aircraft Counts in the Presence of Local, Regional and Airport Constraints

Recently, the ATM community has made important progress in collaborative trajectory management through the introduction of a new FAA traffic management initiative called a Collaborative Trajectory Options Program (CTOP). FAA can use CTOPs to manage air traffic under multiple constraints (manifested as flow constrained areas or FCAs) in the system, and it allows flight operators to indicate their preferences for routing and delay options. CTOPs also permits better management of the overall trajectory of flights by considering both routing and departure delay options simultaneously. However, adoption of CTOPs in airspace has been hampered by many factors that include challenges in how to identify constrained areas and how to set rates for the FCAs. Decision support tools providing assistance would be particularly helpful in effective use of CTOPs. Such DSTs tools would need models of demand and capacity in the presence of multiple constraints. This study examines different approaches to using historical data to create and validate models of maximum flows in sectors and other airspace regions in the presence of multiple constraints. A challenge in creating an empirical model of flows under multiple constraints is a lack of sufficient historical data that captures diverse situations involving combinations of multiple constraints especially those with severe weather. The approach taken here to deal with this is two-fold. First, we create a generalized sector model encompassing multiple sectors rather than individual sectors in order to increase the amount of data used for creating the model by an order of magnitude. Secondly, we decompose the problem so that the amount of data needed is reduced. This involves creating a baseline demand model plus a separate weather constrained flow reduction model and then composing these into a single integrated model. A nominal demand model is a flow model (gdem) in the presence of clear local weather. This defines the flow as a function of weather constraints in neighboring regions, airport constraints and weather in locations that can cause re-routes to the location of interest. A weather constrained flow reduction model (fwx-red) is a model of reduction in baseline counts as a function of local weather. Because the number of independent variables associated with each of the two decomposed models is smaller than that with a single model, need for amount of data is reduced. Finally, a composite model that combines these two can be represented as fwx-red (gdem(e), l) where e represents non-local constraints and l represents local weather. The approaches studied to developing these models are divided into three categories: (1) Point estimation models (2) Empirical models (3) Theoretical models. Errors in predictions of these different types of models have been estimated. In situations when there is abundant data, point estimation models tend to be very accurate. In contrast, empirical models do better than theoretical models when there is some data available. The biggest benefit of theoretical models is their general applicability in wider range situations once the degree of accuracy of these has been established.

Kulkarni, Deepak↗

NASA NTRS1989

Development and validation of CNS (compressible Navier-Stokes) for hypersonic external flows

CNS, a new computational fluid dynamics procedure, has been developed to aid in hypersonic vehicle design. The code can be used to model the entire external flow around hypersonic vehicle shapes, from the captured shock at the nose to the beginning of the wake. Unlike space-marching codes, the technique allows axially separated flow regions to be modeled. Validation trials using sphere-cone data reveal good solution accuracy for the surface pressure and flowfield temperature.

Flores, Jolen↗

NASA NTRS2016

UAS in the NAS Project: Large-Scale Communication Architecture Simulations with NASA GRC Gen5 Radio Model

This report provides a description and performance characterization of the large-scale, Relay architecture, UAS communications simulation capability developed for the NASA GRC, UAS in the NAS Project. The system uses a validated model of the GRC Gen5 CNPC, Flight-Test Radio model. Contained in the report is a description of the simulation system and its model components, recent changes made to the system to improve performance, descriptions and objectives of sample simulations used for test and verification, and a sampling and observations of results and performance data.

avionics↗

NASA NTRS2007

POST2 End-To-End Descent and Landing Simulation for the Autonomous Landing and Hazard Avoidance Technology Project

The Program to Optimize Simulated Trajectories II (POST2) is used as a basis for an end-to-end descent and landing trajectory simulation that is essential in determining the design and performance capability of lunar descent and landing system models and lunar environment models for the Autonomous Landing and Hazard Avoidance Technology (ALHAT) project. This POST2-based ALHAT simulation provides descent and landing simulation capability by integrating lunar environment and lander system models (including terrain, sensor, guidance, navigation, and control models), along with the data necessary to design and operate a landing system for robotic, human, and cargo lunar-landing success. This paper presents the current and planned development and model validation of the POST2-based end-to-end trajectory simulation used for the testing, performance and evaluation of ALHAT project system and models.

Fisher, Jody l.↗

NASA NTRS2011

System Identification Applied to Dynamic CFD Simulation and Wind Tunnel Data

Demanding aerodynamic modeling requirements for military and civilian aircraft have provided impetus for researchers to improve computational and experimental techniques. Model validation is a key component for these research endeavors so this study is an initial effort to extend conventional time history comparisons by comparing model parameter estimates and their standard errors using system identification methods. An aerodynamic model of an aircraft performing one-degree-of-freedom roll oscillatory motion about its body axes is developed. The model includes linear aerodynamics and deficiency function parameters characterizing an unsteady effect. For estimation of unknown parameters two techniques, harmonic analysis and two-step linear regression, were applied to roll-oscillatory wind tunnel data and to computational fluid dynamics (CFD) simulated data. The model used for this study is a highly swept wing unmanned aerial combat vehicle. Differences in response prediction, parameters estimates, and standard errors are compared and discussed

Murphy, Patrick C.↗

NASA NTRS2024

Exploration Extravehicular Mobility Unit (xEMU) Chamber B Thermal Vacuum “Suit 2” Pressure Garment System Test Article Results

NASA’s Exploration Extravehicular Mobility Unit (xEMU) is the government reference next-generation spacesuit design and is engineered to protect astronauts from extreme lunar environmental temperatures. To evaluate the xEMU hardware thermal requirements, the xEMU Testing Team invented, designed, and executed a dual-suit, uncrewed thermal vacuum (TVAC) test at Johnson Space Center’s (JSC) Chamber B. This paper details the test results from the “Suit 2” Pressure Garment System (PGS) test article. The primary objective of the “Suit 2” PGS test article was to evaluate system-level suit heat leak and Environmental Protection Garment (EPG) thermal performance. Eleven unique thermal profiles were tested including both cold and hot environmental cases over the course of five continuous days of testing. The radiative thermal environment was controlled through exposure to liquid-nitrogen shrouds on the chamber walls and a heater cage surrounding the test article. This paper will principally focus on system-level thermal results from the “Suit 2” PGS test article. This paper will examine data collected from one-hundred and seventy thermocouples located in critical locations inside and outside of the suit, as well as seven resistance thermometers (RTDs) for calorimetry to determine total heat flux in and out of the suit. The test data will be compared against the system-level PGS thermal models for model validation. To conclude, this paper will address knowledge gaps presented by unmanned xPGS thermal vacuum testing and the current state of lunar xPGS thermal modeling and testing.

xEMU↗

NASA NTRS2017

Short-Term Forecasts Using NU-WRF for the Winter Olympics 2018

The NASA Unified-Weather Research and Forecasting model (NU-WRF) will be included for testing and evaluation in the forecast demonstration project (FDP) of the International Collaborative Experiment −PyeongChang 2018 Olympic and Paralympic (ICE-POP) Winter Games. An international array of radar and supporting ground based observations together with various forecast and now-cast models will be operational during ICE-POP. In conjunction with personnel from NASA's Goddard Space Flight Center, the NASA Short-term Prediction Research and Transition (SPoRT) Center is developing benchmark simulations for a real-time NU-WRF configuration to run during the FDP. ICE-POP observational datasets will be used to validate model simulations and investigate improved model physics and performance for prediction of snow events during the research phase (RDP) of the project The NU-WRF model simulations will also support NASA Global Precipitation Measurement (GPM) Mission ground-validation physical and direct validation activities in relation to verifying, testing and improving satellite-based snowfall retrieval algorithms over complex terrain.

forecasting↗

NASA NTRS2019

Modeling Mg II During Solar Flares. II. Nonequilibrium Effects

To extract the information that the Mg II NUV spectra (observed by the Interface Region Imaging Spectrograph) carry about the chromosphere during solar ﬂares, and to validate models of energy transport via model–data comparison, forward modeling is required. The assumption of statistical equilibrium (SE) is typically used to obtain the atomic level populations from snapshots of ﬂare atmospheres, due to computational necessity. However, it is possible that relying on SE could lead to spurious results. We compare solving the atomic level populations via SE versus a non-equilibrium (NEQ) time-dependent approach. This was achieved using ﬂare simulations from RADYN alongside the minority species version MS_RADYN from which the time-dependent Mg II atomic level populations and radiation transfer were computed in complete frequency redistribution. The impacts on the emergent proﬁles, light curves, line ratios, and formation heights are discussed. In summary we note that NEQ effects during ﬂares are typically important only in the initial stages and for a short period following the cessation of the energy injection. An analysis of the timescales of ionization equilibrium reveals that for most of the duration of the ﬂare, when the temperatures and densities are sufﬁciently enhanced, the relaxation timescales are short (τrelax < 0.1 s), so that the equilibrium solution is an adequate approximation. These effects vary with the size of the ﬂare, however. In weaker ﬂares, effects can be more pronounced. We recommend that NEQ effects be considered when possible but that SE is sufﬁcient at most stages of the ﬂare.

Kerr, Graham S.↗

NASA NTRS1984

Optimal redesign study of the harm wing

The purpose of this project was to investigate the use of optimization techniques to improve the flutter margins of the HARM AGM-88A wing. The missile has four cruciform wings, located near mid-fuselage, that are actuated in pairs symmetrically and antisymmetrically to provide pitch, yaw, and roll control. The wings have a solid stainless steel forward section and a stainless steel crushed-honeycomb aft section. The wing restraint stiffness is dependent upon wing pitch amplitude and varies from a low value near neutral pitch attitude to a much higher value at off-neutral pitch attitudes, where aerodynamic loads lock out any free play in the control system. The most critical condition for flutter is the low-stiffness condition in which the wings are moved symmetrically. Although a tendency toward limit-cycle flutter is controlled in the current design by controller logic, wing redesign to improve this situation is attractive because it can be accomplished as a retrofit. In view of the exploratory nature of the study, it was decided to apply the optimization to a wing-only model, validated by comparison with results obtained by Texas Instruments (TI). Any wing designs that looked promising were to be evaluated at TI with more complicated models, including body modes. The optimization work was performed by McIntosh Structural Dynamics, Inc. (MSD) under a contract from TI.

Mcintosh, S. C., Jr.↗

NASA NTRS2001

Verification and Validation of Model-Based Autonomous Systems

This paper presents a three year project (FY99 to FY01) on the verification and validation of model based autonomous systems. The topics include: 1) Project Profile; 2) Model-Based Autonomy; 3) The Livingstone MIR; 4) MPL2SMV; 5) Livingstone to SMV Translation; 6) Symbolic Model Checking; 7) From Livingstone Models to SMV Models; 8) Application In-Situ Propellant Production; 9) Closed-Loop Verification Principle; 10) Livingstone PathFinder (LPF); 11) Publications and Presentations; and 12) Future Directions. This paper is presented in viewgraph form.

Pecheur, Charles↗

NASA NTRS1982

A frost formation model and its validation under various experimental conditions

A numerical model that was used to calculate the frost properties for all regimes of frost growth is described. In the first regime of frost growth, the initial frost density and thickness was modeled from the theories of crystal growth. The 'frost point' temperature was modeled as a linear interpolation between the dew point temperature and the fog point temperature, based upon the nucleating capability of the particular condensing surfaces. For a second regime of frost growth, the diffusion model was adopted with the following enhancements: the generalized correlation of the water frost thermal conductivity was applied to practically all water frost layers being careful to ensure that the calculated heat and mass transfer coefficients agreed with experimental measurements of the same coefficients.

Dietenberger, M. A.↗

NASA NTRS1999

Lunar Prospector Orbit Determination Uncertainties Using the High Resolution Lunar Gravity Models

The Lunar Prospector (LP) mission began on January 6, 1998, when the LP spacecraft was launched from Cape Canaveral, Florida. The objectives of the mission were to determine whether water ice exists at the lunar poles, generate a global compositional map of the lunar surface, detect lunar outgassing, and improve knowledge of the lunar magnetic and gravity fields. Orbit determination of LP performed at the Jet Propulsion Laboratory (JPL) is conducted as part of the principal science investigation of the lunar gravity field. This paper will describe the JPL effort in support of the LP Gravity Investigation. This support includes high precision orbit determination, gravity model validation, and data editing. A description of the mission and its trajectory will be provided first, followed by a discussion of the orbit determination estimation procedure and models. Accuracies will be examined in terms of orbit-to-orbit solution differences, as a function of oblateness model truncation, and inclination in the plane-of-sky. Long term predictions for several gravity fields will be compared to the reconstructed orbits to demonstrate the accuracy of the orbit determination and oblateness fields developed by the Principal Gravity Investigator.

Carranza, Eric↗

NASA NTRS2008

Soft Soil Impact Testing and Simulation of Aerospace Structures

In June 2007, a 38-ft/s vertical drop test of a 5-ft-diameter, 5-ft-long composite fuselage section that was retrofitted with a novel composite honeycomb Deployable Energy Absorber (DEA) was conducted onto unpacked sand. This test was one of a series of tests to evaluate the multi-terrain capabilities of the DEA and to generate test data for model validation. During the test, the DEA crushed approximately 6-in. and left craters in the sand of depths ranging from 7.5- to 9-in. A finite element model of the fuselage section with DEA was developed for execution in LS-DYNA, a commercial nonlinear explicit transient dynamic code. Pre-test predictions were generated in which the sand was represented initially as a crushable foam material MAT_CRUSHABLE_FOAM (Mat 63). Following the drop test, a series of hemispherical penetrometer tests were conducted to assist in soil characterization. The penetrometer weighed 20-lb and was instrumented with a tri-axial accelerometer. Drop tests were performed at 16-ft/s and crater depths were measured. The penetrometer drop tests were simulated as a means for developing a more representative soil model based on a soil and foam material definition MAT_SOIL_AND FOAM (Mat 5) in LS-DYNA. The model of the fuselage with DEA was reexecuted using the updated soil model and test-analysis correlations are presented.

Fasanella, Edwin L.↗

NASA NTRS2019

Numerical Simulation on Liquid Hydrogen Chill-Down Process of Vertical Pipeline

In order to improve the cryogenic propellant management technologies for a liquid hydrogen rocket with high specific impulse, JAXA, the University of Tokyo, and the NASA Glenn Research Center have jointly organized a multi-agency model validation collaboration project. As part of this project, JAXA's boiling simulation was validated with NASA's experimental data on vertical pipeline chill-down. Simulation results were in good agreement with the experimental data obtained using an improved boiling model to reproduce the spray flow. This activity achieved liquid hydrogen turbo-pump simulation at JAXA for grasping the boiling flow phenomenon from engine cut-off to re-ignition. This joint research resulted in an international cooperative relationship for discussing the cryogenic propellant management technologies necessary to develop next-generation liquid rockets.

Umemura, Yutaka↗

NASA NTRS1993

Cirrus cloud development in a mobile upper tropospheric trough: The November 26th FIRE cirrus case study

The period from 18 UTC 26 Nov. 1991 to roughly 23 UTC 26 Nov. 1991 is one of the study periods of the FIRE (First International Satellite Cloud Climatology Regional Experiment) 2 field campaign. The middle and upper tropospheric cloud data that was collected during this time allowed FIRE scientists to learn a great deal about the detailed structure, microphysics, and radiative characteristics of the mid latitude cirrus that occurred during that time. Modeling studies that range from the microphysical to the mesoscale are now underway attempting to piece the detailed knowledge of this cloud system into a coherent picture of the atmospheric processes important to cirrus cloud development and maintenance. An important component of the modeling work, either as an input parameter in the case of cloud-scale models, or as output in the case of meso and larger scale models, is the large scale forcing of the cloud system. By forcing we mean the synoptic scale vertical motions and moisture budget that initially send air parcels ascending and supply the water vapor to allow condensation during ascent. Defining this forcing from the synoptic scale to the cloud scale is one of the stated scientific objectives of the FIRE program. From the standpoint of model validation, it is also necessary that the vertical motions and large scale moisture budget of the case studies be derived from observations. It is considered important that the models used to simulate the observed cloud fields begin with the correct dynamics and that the dynamics be in the right place for the right reasons.

Mace, Gerald G.↗