Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VISIBLE IMAGERY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Calibration of the SNPP and NOAA 20 VIIRS Sensors for Continuity of the MODIS Climate Data Records

Accurate long-term sensor calibration and periodic re-processing to ensure consistency and continuity of atmospheric, land and ocean geophysical retrievals from space within the mission period and across different missions is a major requirement of climate data records. In this work, we applied the Multi-Angle Implementation of Atmospheric Correction (MAIAC)-based vicarious calibration technique over Libya-4 desert site to perform calibration analysis of Visible Infrared Imaging Radiometer Suite (VIIRS) on Suomi National Polar-orbiting Partnership (SNPP) and NOAA-20 satellites. For both VIIRS sensors we characterized residual linear calibration trends and cross-calibrated both sensors to MODerate resolution Imaging Spectroradiometer (MODIS) Aqua regarded as a calibration standard. The relative spectral response (RSR) differences were accounted for using the German Aerospace Center (DLR) Earth Sensing Imaging Spectrometer (DESIS) hyperspectral surface reflectance data. Our results agree with independent vicarious calibration results of both the MODIS/VIIRS Characterization Support Team as well as the CERES Imager and Geostationary Calibration Group within estimated uncertainty of 1–2%. Analysis of MAIAC geophysical products with the new calibration shows a high level of agreement of MAIAC aerosol, surface reflectance and NDVI records between MODIS and VIIRS. Excluding high aerosol optical depth (AOD), all three sensors agree in AOD with mean difference (MD) less than 0.01 and residual mean squared difference rmsd ∼ 0.04. Spectral geometrically normalized surface reflectance agrees within rmsd of 0.003–0.005 in the visible and 0.01–0.012 at longer wavelengths. The residual surface reflectance differences are fully explained by differences in spectral filter functions. Finally, difference in NDVI is characterized by rmsd ∼ 0.02 and MD less than 0.003 for NDVI based on VIIRS imagery bands I1/I2 and less than 0.01 for NDVI based on VIIRS radiometric bands M5/M7. In practical sense, these numbers indicate consistency and continuity in MAIAC records ensuring the smooth transition from MODIS to VIIRS.

MAIAC↗
NASA NTRS1975

Faults on Skylab imagery of the Salton Trough area, Southern California

The author has identified the following significant results. Large segments of the major high angle faults in the Salton Trough area are readily identifiable in Skylab images. Along active faults, distinctive topographic features such as scarps and offset drainage, and vegetation differences due to ground water blockage in alluvium are visible. Other fault-controlled features along inactive as well as active faults visible in Skylab photography include straight mountain fronts, linear valleys, and lithologic differences producing contrasting tone, color or texture. A northwestern extension of a fault in the San Andreas set, is postulated by the regional alignment of possible fault-controlled features. The suspected fault is covered by Holocene deposits, principally windblown sand. A northwest trending tonal change in cultivated fields across Mexicali Valley is visible on Skylab photos. Surface evidence for faulting was not observed; however, the linear may be caused by differences in soil conditions along an extension of a segment of the San Jacinto fault zone. No evidence of faulting could be found along linears which appear as possible extensions of the Substation and Victory Pass faults, demonstrating that the interpretation of linears as faults in small scale photography must be corroborated by field investigations.

Merifield, P. M.↗
NASA NTRS2007

The Impacts of Bowtie Effect and View Angle Discontinuity on MODIS Swath Data Gridding

We have analyzed two effects of the MODIS viewing geometry on the quality of gridded imagery. First, the fact that the MODIS scans a swath of the Earth 10 km wide at nadir, causes abrupt change of the view azimuth angle at the boundary of adjacent scans. This discontinuity appears as striping of the image clearly visible in certain cases with viewing geometry close to principle plane over the snow of the glint area of water. The striping is a true surface Bi-directional Reflectance Factor (BRF) effect and should be preserved during gridding. Second, due to bowtie effect, the observations in adjacent scans overlap each other. Commonly used method of calculating grid cell value by averaging all overlapping observations may result in smearing of the image. This paper describes a refined gridding algorithm that takes the above two effects into account. By calculating the grid cell value by averaging the overlapping observations from a single scan, the new algorithm preserves the measured BRF signal and enhances sharpness of the image.

Wang, Yujie↗
DOE OSTI2021

An Automated Method for Mapping Giant Kelp Canopy Dynamics from UAV

Satellite and aerial imagery have been used extensively for mapping the abundance and distribution of giant kelp ( Macrocystis pyrifera ) in southern California. There is now great potential for using unoccupied aerial vehicles (UAVs) to map kelp canopy at very high resolutions. However, tides and currents have been shown to affect the amount of floating kelp canopy on the water surface, and the impacts of these processes on remotely sensed kelp estimates in this region have not been fully quantified. UAVs were used to map fine-scale changes in canopy area due to tidal height and current speed at kelp forests off the coast of Palos Verdes, CA and Santa Barbara, CA. An automated method for detecting kelp canopy was developed that was 67% accurate using red-green-blue (RGB) UAV imagery and 93% accurate using multispectral UAV imagery across a range of weather, ocean, and illumination conditions. Increases in tidal height of 1 m reduced the amount of floating kelp canopy by 15% in Santa Barbara and by over 30% in Palos Verdes. The effect of current speed on visible kelp canopy was inconclusive, but there was a trend towards lower canopy area with increased current speed. Therefore, while tidal height and current speed can introduce significant variability to estimates of kelp abundance, the magnitude of this variability is site specific. Still, UAVs are a valuable tool for mapping of kelp canopy and can provide greater spatial resolution and temporal coverage than is possible from many satellite sensors. This data can provide insight into the patterns and drivers of high frequency fluctuations in kelp abundance.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

The use of Landsat-3 thermal data to help differentiate land covers

Landsat-3 Multispectral Scanner Subsystem (MSS) digital data of the Baltimore, Maryland area gathered on May 24, 1978, are examined to show the usefulness of thermal data in providing better discrimination between agricultural and residential areas, certain types of urban/industrial areas and water, cloud shadows and water, and bare-extractive areas and bright urban cover types. High altitude aircraft imagery taken on May 3, 1978, provides ground truth and training site verification. Two classifications are made for each training site: the initial one using bands 4, 5, and 7 and a second in which the thermal data are included with the visible and near infrared data. This permits a direct comparison of areas spectrally similar with and without the inclusion of the thermal data. Commission errors determined from selected subsets of the data show reductions of 95% for the urban/industrial versus water themes, 84% for the residential versus agriculture themes, 64.0% for the bare-extractive versus bright urban themes, and 24% for the cloud shadow versus water themes when the thermal data are included in the signature.

Ormsby, J. P.↗
NASA NTRS1983

A satellite stereoscopic technique to estimate tropical cyclone intensity

The techniques used to obtain the mean equivalent temperature of the eye wall for Hurricanes Frederic (1979) and Allen (1980) using GOES satellite IR and stereoscopic observations are described. The eye wall is the area of greatest convection near the center of the storm, and is bounded by the inner radius around the eye and the outer radius bounding the area of inner core convection. The stereoscopic capability afforded by the GOES West and East spacecraft permits simultaneous, two-view imagery of a tropical cyclone, yielding height measurement accuracies of 0.5 km and horizontal accuracies as small as 1 km. An airborne lidar unit was used to verify the height measurements made of Hurricane Frederic. At the same time, the GOES East Visible IR Spin Scan Radiometer (VISSR) provided the mean wall temperatures from the release of latent heat. The trials aided in identifying the assumptions and consequent inaccuracies introduced into the temperature sounding data during analysis. The satellite data is concluded useful for monitoring changes in storm intensity.

Rodgers, E. B.↗
NASA NTRS1985

Images in the rocket ultraviolet - The stellar population in the central bulge of M31

Imagery of the bulge of M31 obtained with a rocket-borne telescope in two broad bands centered at 1460 A and 2380 A is discussed. The UV spatial profiles over a region about 200 arcsec wide are identical with those at visible wavelengths. The absence of detectable point sources indicates that main-sequence stars hotter than B0 V are not present in the bulge. It is suggested that the far-UV flux in old stellar populations originates in post-AGB stars. The UV flux from such stars is extremely sensitive to age and the physics of their previous mass loss.

Bohlin, R. C.↗
NASA NTRS1986

Window of visibility - A psychophysical theory of fidelity in time-sampled visual motion displays

A film of an object in motion presents on the screen a sequence of static views, while the human observer sees the object moving smoothly across the screen. Questions related to the perceptual identity of continuous and stroboscopic displays are examined. Time-sampled moving images are considered along with the contrast distribution of continuous motion, the contrast distribution of stroboscopic motion, the frequency spectrum of continuous motion, the frequency spectrum of stroboscopic motion, the approximation of the limits of human visual sensitivity to spatial and temporal frequencies by a window of visibility, the critical sampling frequency, the contrast distribution of staircase motion and the frequency spectrum of this motion, and the spatial dependence of the critical sampling frequency. Attention is given to apparent motion, models of motion, image recording, and computer-generated imagery.

Watson, A. B.↗
NASA NTRS1999

A Southern California Perspective of the April, 1998 Trans-Pacific Asian Dust Event

The Jet Propulsion Laboratory (JPL) coherent CO2 backscatter lidar has been in almost continuous operation since 1984 and has now accumulated a significant time-series database tracking the long-term and seasonal variability of backscatter from the atmospheric column above the Pasadena, Calif. locale. A particularly noteworthy episode observed by the lidar in 1998 was a particularly extreme instance of incursion by Asian-sourced dust during the closing days of April. Such events are not uncommon during the northern spring, when strong cold fronts and convection over the Asian interior deserts loft crustal material into the mid-troposphere whence it can be transported across the Pacific Ocean, occasionally reaching the continental US. However, the abnormal strength of the initiating storm in this case generated an atypically dense cloud of material which resulted in dramatically reduced visibility along the length of the Western Seaboard. These dust events are now recognized as a potentially significant, non-negligible radiative forcing influence. The progress of the April 1998 dust cloud eastward across the Pacific Ocean was initially observed in satellite imagery and transmitted to the broader atmospheric research community via electronic communications. The use of Internet technology in this way was effective in facilitating a rapid response correlative measurement exercise by numerous atmospheric observation stations throughout the western US and its success has resulted in the subsequent establishment of an ad hoc communications environment, data exchange medium, and mechanism for providing early-warning alert of other significant atmospheric phenomena in the future.

Tratt, David M.↗
NASA NTRS1973

Spectral ratio imaging methods for geological remote sensing from aircraft and satellites

The author has identified the following significant results. The production of ratio images from multispectral scanner data is described and several examples of ratio images from aircraft and ERTS-1 data are given for visible, reflective infrared, and thermal infrared wavelengths. The application of photogrammetric techniques to ratio images, defined for this paper as ratio scannergrammetry, is considerably aided by the lesser dependence of ratio images on atmospheric and solar illumination variations, compared with single channel scanner imagery or aerial photos. Ratio scannergrammetry is further aided by the proportionality between ratios of a target deduced from ratio images and ratios of reflectances calculated from laboratory spectra of samples from the target area. Consequently, ratios calculated from laboratory data can be used to predict which ratios are best for discriminating a given rock or mineral, to predict what other rocks or minerals will be confused with it, and finally, to place ratio scannergrammetry on an absolute basis, within an estimated standard error on the order of 5% to 10%. Examples of relative agreement between laboratory data and ratio images are given from two iron oxides, hematite and magnetite.

Vincent, R. K.↗
NASA NTRS1982

The observation of ocean surface phenomena using imagery from the Seasat synthetic aperture radar - An assessment

The principles governing synthetic aperture radar (SAR) and its use on the Seasat spacecraft are reviewed. The way in which wind stress, surface currents, long gravity waves, and surface films modulate the scattering properties of resonant (approximately 30-cm-wavelength) waves is discussed, with particular emphasis placed on the mechanisms that could produce images of long gravity waves. Doppler effects by ocean motion are also described. Measurements of long (wavelength more than about 100 m) gravity waves made using Seasat SAR imagery are compared with surface measurements during several experiments. Combining these results, it is found that dominant wavelength and direction are measured by Seasat SAR within + or - 12% and + or - 15 deg, respectively. It is noted, however, that ocean waves are not always visible in SAR images, and detection criteria are discussed in terms of wave height, length, and direction.

Vesecky, J. F.↗
NASA NTRS2020

The Age of Surface-Exposed Ice Along the Northern Margin of the Greenland Ice Sheet

Each summer, surface melting of the margin of the Greenland Ice Sheet exposes a distinctive visible stratigraphy that is related to past variability in subaerial dust deposition across the accumulation zone and subsequent ice flow toward the margin. Here we map this surface stratigraphy along the northern margin of the ice sheet using mosaicked Sentinel-2 multispectral satellite imagery from the end of the 2019 melt season and finer-resolution WorldView-2/3 imagery for smaller regions of interest. We trace three distinct transitions in apparent dust concentration and the top of a darker basal layer. The three dust transitions have been identified previously as representing late-Pleistocene climatic transitions, allowing us to develop a coarse margin chronostratigraphy for northern Greenland. Substantial folding of late-Pleistocene stratigraphy is observed but uncommon. The oldest conformal surface-exposed ice in northern Greenland is likely located adjacent to Warming Land and maybe up to ~55 thousand years old. Basal ice is commonly exposed hundreds of meters from the ice margin and may indicate a widespread frozen basal thermal state. We conclude that the ice margin across northern Greenland offers multiple opportunities to recover paleoclimatically distinct ice relative to previously studied regions in southwestern Greenland.

Joseph A Macgregor↗
DOE OSTI2025

Assessing Heterogeneity of Surface Water Temperature Following Stream Restoration and a High-Intensity Fire from Thermal Imagery

Thermal heterogeneity of rivers is essential to support freshwater biodiversity. Salmon behaviorally thermoregulate by moving from patches of warm water to cold water. When implementing river restoration projects, it is essential to monitor changes in temperature and thermal heterogeneity through time to assess the impacts to a river’s thermal regime. Lightweight sensors that record both thermal infrared (TIR) and multispectral data carried via unoccupied aircraft systems (UASs) present an opportunity to monitor temperature variations at high spatial (<0.5 m) and temporal resolution, facilitating the detection of the small patches of varying temperatures salmon require. Here, we present methods to classify and filter visible wetted area, including a novel procedure to measure canopy cover, and extract and correct radiant surface water temperature to evaluate changes in the variability of stream temperature pre- and post-restoration followed by a high-intensity fire in a section of the river corridor of the South Fork McKenzie River, Oregon. We used a simple linear model to correct the TIR data by imaging a water bath where the temperature increased from 9.5 to 33.4 °C. The resulting model reduced the mean absolute error from 1.62 to 0.35 °C. We applied this correction to TIR-measured temperatures of wetted cells classified using NDWI imagery acquired in the field. We found warmer conditions (+2.6 °C) after restoration (p < 0.001) and median absolute deviation for pre-restoration (0.30) to be less than both that of post-restoration (0.85) and post-fire (0.79) orthomosaics. In addition, there was statistically significant evidence to support the hypothesis of shifts in temperature distributions pre- and post-restoration (KS test 2009 vs. 2019, p < 0.001, D = 0.99; KS test 2019 vs. 2021, p < 0.001, D = 0.10). Moreover, we used a Generalized Additive Model (GAM) that included spatial and environmental predictors (i.e., canopy cover calculated from multispectral NDVI and photogrammetrically derived digital elevation model) to model TIR temperature from a transect along the main river channel. This model explained 89% of the deviance, and the predictor variables showed statistical significance. Collectively, our study underscored the potential of a multispectral/TIR sensor to assess thermal heterogeneity in large and complex river systems.

Barker, Matthew I. (ORCID:0000000252864930)↗
NASA NTRSDate not supplied

The SCIFLI Airborne Observation of Artemis 1 Ascent

SCIFLI, The Scientifically Calibrated In-Flight Imagery (https://scifli.larc.nasa.gov/), team at NASA Langley Research Center specializes in the collection of multispectral data for space vehicles during Ascent and Entry, Descent, and Landing (EDL) observations. Multispectral datasets are invaluable across the NASA Agency and to commercial stakeholders for evaluating the performance of launch and re-entry space vehicles and ensuring the safety of the scientific research community. The launch of Artemis 1 marked the initiation of NASA returning to lunar exploration. SCIFLI’s Airborne Multispectral Imager (SAMI) was deployed by the SCIFLI team to scientifically document the historic event and provide the NASA research community with aerial footage of the event in wavelength channels ranging from the ultraviolet (UV) to the visible (VIS) to mid-wave infrared (MWIR). SAMI was designed to spectrally image unique aerothermal phenomena during the Artemis 1 launch. The use of these datasets captured in-flight during the launch will provide insight to research organizations across the Agency; aiding in validation efforts for simulations and modeling that contributed to the kickoff of the Agency’s resurgence to lunar exploration. This presentation will focus on the imagery captured on SAMI by the WB-57 team on November 16th, 2022, during the observation. Imaging objectives were identified and considered beforehand to determine the configuration of the SAMI instrument for the imaging mission. SCIFLI and Opto-Knowledge Systems, Inc. (OKSI) performed a thorough review of the datasets collected to identify and characterize aerothermal phenomena occurring during the observation. Additional post-processing was completed to provide quantitatively calibrated temperature images of the rocket during the observation. Some of the candidates were not optimal for quantitative temperature extraction due to common degradation factors, but after various image enhancements they proved useful for qualitatively characterizing different phenomena during the observation.

Artemis1↗
NASA NTRS1973

Experiment to evaluate feasibility of utilizing Skylab-EREP remote sensing data for tectonic analysis of the Bighorn Mountains region, Wyoming-Montana

The author has identified the following significant results. Excellent imagery has been obtained from SL-3 along track 5 across the Bighorn Mountains and track 19 across the northern Black Hills. The red band is by far the best of the four black and white films of S-190A. Excellent detail is visible of topography, structure, resistant lithologies, and culture with good resolution obtainable at high magnification (30X). The infrared bands do not have as good resolution and are grainy at high magnification. They are of use as a complement to the red band particularly for relief enhancement in areas of heavy green grass and forest cover. S-190B high definition black and white is comparable to the red band (S-190A) in detail. Its main advantage is larger initial scale and slightly better resolution. High resolution color transparencies along track 19 allow detailed delineation of cultivated land and strip mining. A group of folds northwest of Billings stand out clearly. Light colored units in northwestern Black Hills and in the badlands can be mapped in great detail.

Hoppin, R. A.↗
NASA NTRS1974

Dynamics of suspended sediment plumes in Lake Ontario

The author has identified the following significant results. Two unusual turbidity features were detected in imagery obtained over Lake Ontario on September 19, 1973. The location of a submerged sewer outfall was detected in frame 1423-15224-5 about 2 kilometers offshore opposite a treatment plant serving Rochester, New York. The other feature was a thermal heat plume made visible by an erosive eastward moving longshore current. The thermal plume, which extended about 3 kilometers into the lake, results from the discharge of cooling water from a nuclear power plant located 20 miles east of Rochester, New York. Under an offshore wind field, the outer edge of the Niagara River plume extended 30 kilometers into Lake Ontario on September 3, 1973. By way of contrast, a strong west-northwest wind on April 29, 1973, confined the plume to about 3 kilometers of the lake's south shore. The size of the Genesee River plume is largely dependent on discharge. During the spring high flow season, the plume extended over 22 square kilometers of the lake's surface on May 16, 1973. As runoff dwindled with the approach of summer, the plume contracted to less than 1 square kilometer in area by mid-July.

Pluhowski, E. J.↗
NASA NTRS2022

Spectrally Simplified Approach for Leveraging Legacy Geostationary Oceanic Observations

The use of multispectral geostationary satellites to study aquatic ecosystems improves the temporal frequency of observations and mitigates cloud obstruction, but no operational capability presently exists for the coastal and inland waters of the United States. The Advanced Baseline Imager (ABI) on the current iteration of the Geostationary Operational Environmental Satellites, termed the R Series (GOES-R), however, provides sub-hourly imagery and the opportunity to overcome this deficit and to leverage a large repository of existing GOES-R aquatic observations. The fulfillment of this opportunity is assessed herein using a spectrally simplified, two-channel aquatic algorithm consistent with ABI wave bands to estimate the diffuse attenuation coefficient for photosynthetically available radiation, K(d)(PAR). First, an in situ ABI dataset was synthesized using a globally representative dataset of above- and in-water radiometric data products. Values of K(d)(PAR) were estimated by fitting the ratio of the shortest and longest visible wave bands from the in situ ABI dataset to coincident, in situ K(d)(PAR) data products. The algorithm was evaluated based on an iterative cross-validation analysis in which 80% of the dataset was randomly partitioned for fitting and the remaining 20% was used for validation. The iteration producing the median coefficient of determination (R2) value (0.88) resulted in a root mean square difference of 0.319 m−1, or 8.5% of the range in the validation dataset. Second, coincident mid-day images of central and southern California from ABI and from the Moderate Resolution Imaging Spectroradiometer (MODIS) were compared using Google Earth Engine (GEE). GEE default ABI reflectance values were adjusted based on a near infrared signal. Matchups between the ABI and MODIS imagery indicated similar spatial variability (R2 = 0.60) between ABI adjusted blue-to-red reflectance ratio values and MODIS default diffuse attenuation coefficient for spectral downward irradiance at 490 nm, K(d)(490), values. This work demonstrates that if an operational capability to provide- ABI aquatic data products was realized, the spectral configuration of ABI would potentially support a sub-hourly, visible aquatic data product that is applicable to water-mass tracing and physical oceanography research.

Advanced Baseline Imager↗
NASA NTRSDate not supplied

Innovative Features of NASA's Celestial Mapping System to Support Exploration in the Lunar South Pole

Introduction: NASA's Celestial Mapping System (CMS) is developed to address the need for 3D tools for planetary science investigations, mission planning, in-situ operations, in a 3D-first design constructed around a unified view of a planetary globe. At present CMS provides many critical functionalities that include 1) Equipment planning and optimized placement on Lunar surface 2) Line of sight (visibility ) analysis 3) Powerful measurement tools based on 3D terrain with realistic 3D models to represent rovers, astronauts and equipment 4) Visualization of de-rived mapping products (e.g. resource maps), and 5) Data engine for hosting new observations that are not available in other contemporary lunar data tools. CMS is built on the foundation of powerful NASA WorldWind globe engines. In near future, users will be able to simultaneously deploy CMS onto multiple hardware configurations and platforms such as Windows, Linux, iOS and Android. The users will also have the flexibility to update to the latest imagery and terrain datasets as they are being acquired (in real time) before and/or during the exploration mission. CMS is also capable of consumption and analysis of data from locally hosted and external sources. It supports Open Geospatial Consorti-um (OGC) data and file standards, with current integrations of datasets from the Astrogeology Science Center of USGS which include global and local data acquired from NASA (LRO, Clementine, Lunar Orbiter) and JAXA (SELENE/Kaguya) with the capability of integrating more datasets. With development experience in both the end-user application and planetary engine side, CMS is also able to adapt to newer Lunar cartography standards as they develop and become recognized by international geospatial panels. Overcoming Polar Distortions: 3D geospatial applications traditionally suffer from significant distortion of imagery at the poles due to following reasons – 1) distortions in the source imagery 2) Incompatible tessellation algorithm on the poles 3) map projections. In the lunar context, with the focus on the South pole, this is not acceptable. The CMS team is researching ways to address polar distortion of imagery with new tessellation algorithms and by reprojecting the data using projections that are more accurate in polar scenarios. Figure1 shows the potential error introduced by different tessellation methods, represented by the red and green circles for Shoemaker crater. There is ~2 Km difference in the placement of the crater. Line of Sight Analysis and Traverse Planning: We have developed a built-in line of sight analysis (LOS) tool in CMS that analyzes the terrain profile and obstructions and provides the visibility of a given terrain for a remote observer. Figure 2 shows the viewshed analysis on the PSR in Nobile region. The PSR was created with help of HORUS generated images. The yellow pin shows the observer location outside the PSR. The yellow area shows the visible part of PSR. The obstructed area with no visibility for the observer is shown in red. This analysis was ex-tended further to set different heights for various observers and then perform the viewshed analysis. Combining the different visibility profiles can help designing improved traverses within the crater.

Geospatial Mapping↗