Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VELOCITY DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

(596) SCHEILA IN OUTBURST: A PROBABLE COLLISION EVENT IN THE MAIN ASTEROID BELT

Images of asteroid (596) Scheila have been acquired at various dates after the discovery of the 2010 outburst. Assuming a short-duration event scenario, as suggested by the quick vanishing of the dust tail brightness with time, and numerically integrating the equation of motion of individual particles ejected from the surface, we have developed a tail model from which we estimate the parameters associated with the geometry of the ejection, the size distribution, and the velocity distribution of the ejected particles, as well as the total mass ejected. We found a weak inverse power-law dependence of ejection velocity versus particle radius, with velocities ranging from 50 to 80 m s{sup -1} for particle radii in the range from 5 cm to 8 x 10{sup -5} cm, respectively. These velocities are very different from those expected from ice sublimation at the asteroid heliocentric distance ({approx}3 AU) and suggest a collision scenario as a likely cause of the outburst. We found that the ejected particles are distributed in size following a power law of index -3, and, based on the ejecta mass and scaling laws, the impactor size is estimated at 30-90 m in radius, assuming an impact velocity of {approx}5 km s{sup -1}, and the same density (1500 kg m{sup -3}) for the asteroid as for the projectile. We have inferred an asymmetry in the ejecta along the axis normal to the asteroid orbit plane, a likely indicator of an oblique impact. The impact is estimated to have occurred on November 27, with an accuracy not better than {+-}3 days.

79 ASTRONOMY AND ASTROPHYSICS↗

The state of meteoritic material on the moon

Velocity distributions obtained from earth-based meteor observations and corrected to constant meteoroid mass are transformed to meteoroid impact velocity distributions at the moon. Average velocities at the moon thus obtained range from 13 to 18 km/sec. This information is then combined with impact heating estimates to determine the amounts of resident lunar material and incoming meteoritic material that is melted or vaporized. It is found that about 5% of the resulting melt and about 25% of the impact generated vapor should be of meteoritic content. The uncertainties in these estimates are rather large, however, because of uncertainties in the various experimental results required to establish the parameters used in this analysis. The impact generated melts and impact generated vapor deposits, if the latter can be found, should provide additional means for chemically separating out the meteoritic component in the lunar soil.

Zook, H. A.↗

Unified halo-independent formalism from convex hulls for direct dark matter searches

Using the Fenchel-Eggleston theorem for convex hulls (an extension of the Caratheodory theorem), we prove that any likelihood can be maximized by either a dark matter 1- speed distribution F ( v ) in Earth's frame or 2- Galactic velocity distribution f gal ( ) , consisting of a sum of delta functions. The former case applies only to time-averaged rate measurements and the maximum number of delta functions is ( -1) , where is the total number of data entries. The second case applies to any harmonic expansion coefficient of the time-dependent rate and the maximum number of terms is . Using time-averaged rates, the aforementioned form of F ( v ) results in a piecewise constant unmodulated halo function 0 BF ( v min ) (which is an integral of the speed distribution) with at most ( -1) downward steps. The authors had previously proven this result for likelihoods comprised of at least one extended likelihood, and found the best-fit halo function to be unique. This uniqueness, yet, cannot be guaranteed in the more general analysis applied to arbitrary likelihoods. Thus we introduce a method for determining whether there exists a unique best-fit halo function, and provide a procedure for constructing either a pointwise confidence band, if the best-fit halo function is unique, or a degeneracy band, if it is not. Using measurements of modulation amplitudes, the aforementioned form of f gal ( ) , which is a sum of Galactic streams, yields a periodic time-dependent halo function BF ( v min , t ) which at any fixed time is a piecewise constant function of v min with at most downward steps. In this case, we explain how to construct pointwise confidence and degeneracy bands from the time-averaged halo function. Lastly, we show that requiring an isotropic Galactic velocity distribution leads to a Galactic speed distribution F ( u ) that is once again a sum of delta functions, and produces a time-dependent BF ( v min , t ) function (and a time-averaged 0 BF ( v min )) that is piecewise linear, differing significantly from best-fit halo functions obtained without the assumption of isotropy.

79 ASTRONOMY AND ASTROPHYSICS↗

A new determination of the halo luminosity density of the galaxy

The distribution of tangential velocities for arbitrary halo velocity dispersions and rotation rates are explicitly computed, assuming a particular form of the halo velocity distribution function near the sun. It is found that for a specific model of the halo velocity dispersion tensor that Schmidt's (1975) estimate of the mass carried by halo stars of 0.25-0.70 solar masses should be revised by a factor of between 1.0 and 2.0, depending on the rotation rate of the halo. Although obtaining a mass density in all stars from the stellar density in that mass range is extremely uncertain, it is found, in agreement with earlier work, that even under rather extreme assumptions about the remnants the observed stars and expected remnants fail to provide the theoretically expected mass. Comparison of the luminosity to the theoretical mass yields a mass to light ratio consistent with that of rich clusters of galaxies.

Richstone, D. O.↗

One-dimensional particle simulations of Knudsen-layer effects on D-T fusion

Particle simulations are used to solve the fully nonlinear, collisional kinetic equation describing the interaction of a high-temperature, high-density, deuterium-tritium plasma with absorbing boundaries, a plasma source, and the influence of kinetic effects on fusion reaction rates. Both hydrodynamic and kinetic effects influence the end losses, and the simulations show departures of the ion velocity distributions from Maxwellian due to the reduction of the population of the highest energy ions (Knudsen-layer effects). The particle simulations show that the interplay between sources, plasma dynamics, and end losses results in temperature anisotropy, plasma cooling, and concomitant reductions in the fusion reaction rates. However, for the model problems and parameters considered, particle simulations show that Knudsen-layer modifications do not significantly affect the velocity distribution function for velocities most important in determining the fusion reaction rates, i.e., the thermal fusion reaction rates using the local densities and bulk temperatures give good estimates of the kinetic fusion reaction rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collisional effects on nonlinear ion drag force for small grains

The ion drag force arising from plasma flow past an embedded spherical grain is calculated self-consistently and non-linearly using particle in cell codes, accounting for ion-neutral collisions. Using ion velocity distribution appropriate for ion drift driven by a force field gives wake potential and force greatly different from a shifted Maxwellian distribution, regardless of collisionality. The low-collisionality forces are shown to be consistent with estimates based upon cross-sections for scattering in a Yukawa (shielded) grain field, but only if non-linear shielding length is used. Finite collisionality initially enhances the drag force, but only by up to a factor of 2. Larger collisionality eventually reduces the drag force. In the collisional regime, the drift distribution gives larger drag than the shift distribution even at velocities where their collisionless drags are equal. Comprehensive practical analytic formulas for force that fit the calculations are provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

General theory of airfoil sections having arbitrary shape or pressure distribution

In this report a theory of thin airfoils of small camber is developed which permits either the velocity distribution corresponding to a given airfoil shape, or the airfoil shape corresponding to a given velocity distribution to be calculated. The procedures to be employed in these calculations are outlined and illustrated with suitable examples.

Allen, H Julian↗

Building America Case Study: Standard- Versus High-Velocity Air Distribution in High-Performance Townhomes, Denver, Colorado

IBACOS investigated the performance of a small-diameter high-velocity heat pump system compared to a conventional system in a new construction triplex townhouse. A ductless heat pump system also was installed for comparison, but the homebuyer backed out because of aesthetic concerns about that system. In total, two buildings, having identical solar orientation and comprised of six townhomes, were monitored for comfort and energy performance.

air distribution↗

IN-SYNC. III. THE DYNAMICAL STATE OF IC 348—A SUPER-VIRIAL VELOCITY DISPERSION AND A PUZZLING SIGN OF CONVERGENCE

Most field stars will have encountered the highest stellar density and hence the largest number of interactions in their birth environment. Yet the stellar dynamics during this crucial phase are poorly understood. Here we analyze the radial velocities measured for 152 out of 380 observed stars in the 2–6 Myr old star cluster IC 348 as part of the SDSS-III APOGEE. The radial velocity distribution of these stars is fitted with one or two Gaussians, convolved with the measurement uncertainties including binary orbital motions. Including a second Gaussian improves the fit; the high-velocity outliers that are best fit by this second component may either (1) be contaminants from the nearby Perseus OB2 association, (2) be a halo of ejected or dispersing stars from IC 348, or (3) reflect that IC 348 has not relaxed to a Gaussian velocity distribution. We measure a velocity dispersion for IC 348 of 0.72 ± 0.07 km s{sup −1} (or 0.64 ± 0.08 km s{sup −1} if two Gaussians are fitted), which implies a supervirial state, unless the gas contributes more to the gravitational potential than expected. No evidence is found for a dependence of this velocity dispersion on distance from the cluster center or stellar mass. We also find that stars with lower extinction (in the front of the cloud) tend to be redshifted compared with stars with somewhat higher extinction (toward the back of the cloud). This data suggest that the stars in IC 348 are converging along the line of sight. We show that this correlation between radial velocity and extinction is unlikely to be spuriously caused by the small cluster rotation of 0.024 ± 0.013 km s{sup −1} arcmin{sup −1} or by correlations between the radial velocities of neighboring stars. This signature, if confirmed, will be the first detection of line of sight convergence in a star cluster. Possible scenarios for reconciling this convergence with IC 348's observed supervirial state include: (a) the cluster is fluctuating around a new virial equilibrium after a recent disruption due to gas expulsion or a merger event, or (b) the population we identify as IC 348 results from the chance alignment of two sub-clusters converging along the line of sight. Additional measurements of tangential and radial velocities in IC 348 will be important for clarifying the dynamics of this region and informing models of the formation and evolution of star clusters. The radial velocities analyzed in this paper have been made available online.

79 ASTRONOMY AND ASTROPHYSICS↗

A cometary hydrogen model - Comparison with OGO-5 measurements of Comet Bennett /1970 II/

A model is constructed for the hydrogen cloud of Comet Bennett (1970 II) based on highly sensitive observations of its Lyman alpha emission by a photometer on board OGO-5 and taking into account the cometary motion, field gradients, solar L-alpha profile, and finite lifetime of the H atoms along their trajectories. The solar L-alpha flux is determined independently of instrumental calibration using the strong curvature of the hydrogen cloud in the orbital plane of the comet, and the cometary production rate of hydrogen atoms is calculated. The combination of two equally weighted Maxwellian velocity distributions with mean velocities of 7 and 21 km/sec is found to match the photometer scans across the comet better than any single Maxwellian distribution. A complete L-alpha isophote map is presented for the model hydrogen cloud on Mar. 20, 1970.

Keller, H. U.↗

TURBULENT LINEWIDTHS IN PROTOPLANETARY DISKS: PREDICTIONS FROM NUMERICAL SIMULATIONS

Submillimeter observations of protoplanetary disks now approach the acuity needed to measure the turbulent broadening of molecular lines. These measurements constrain disk angular momentum transport, and furnish evidence of the turbulent environment within which planetesimal formation takes place. We use local magnetohydrodynamic (MHD) simulations of the magnetorotational instability (MRI) to predict the distribution of turbulent velocities in low-mass protoplanetary disks, as a function of radius and height above the mid-plane. We model both ideal MHD disks and disks in which Ohmic dissipation results in a dead zone of suppressed turbulence near the mid-plane. Under ideal conditions, the disk mid-plane is characterized by a velocity distribution that peaks near v {approx_equal} 0.1c{sub s} (where c{sub s} is the local sound speed), while supersonic velocities are reached at z > 3H (where H is the vertical pressure scale height). Residual velocities of v Almost-Equal-To 10{sup -2} c{sub s} persist near the mid-plane in dead zones, while the surface layers remain active. Anisotropic variation of the linewidth with disk inclination is modest. We compare our MHD results to hydrodynamic simulations in which large-scale forcing is used to initiate similar turbulent velocities. We show that the qualitative trend of increasing v with height, seen in the MHD case, persists for forced turbulence and is likely a generic property of disk turbulence. Percentage level determinations of v at different heights within the disk, or spatially resolved observations that probe the inner disk containing the dead zone region, are therefore needed to test whether the MRI is responsible for protoplanetary disk turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗

Vlasov simulations of kinetic Alfvén waves at proton kinetic scales

Kinetic Alfvén waves represent an important subject in space plasma physics, since they are thought to play a crucial role in the development of the turbulent energy cascade in the solar wind plasma at short wavelengths (of the order of the proton gyro radius ρ{sub p} and/or inertial length d{sub p} and beyond). A full understanding of the physical mechanisms which govern the kinetic plasma dynamics at these scales can provide important clues on the problem of the turbulent dissipation and heating in collisionless systems. In this paper, hybrid Vlasov-Maxwell simulations are employed to analyze in detail the features of the kinetic Alfvén waves at proton kinetic scales, in typical conditions of the solar wind environment (proton plasma beta β{sub p} = 1). In particular, linear and nonlinear regimes of propagation of these fluctuations have been investigated in a single-wave situation, focusing on the physical processes of collisionless Landau damping and wave-particle resonant interaction. Interestingly, since for wavelengths close to d{sub p} and β{sub p} ≃ 1 (for which ρ{sub p} ≃ d{sub p}) the kinetic Alfvén waves have small phase speed compared to the proton thermal velocity, wave-particle interaction processes produce significant deformations in the core of the particle velocity distribution, appearing as phase space vortices and resulting in flat-top velocity profiles. Moreover, as the Eulerian hybrid Vlasov-Maxwell algorithm allows for a clean almost noise-free description of the velocity space, three-dimensional plots of the proton velocity distribution help to emphasize how the plasma departs from the Maxwellian configuration of thermodynamic equilibrium due to nonlinear kinetic effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Determination of the Geometries of Multiple-Element Airfoils Optimized for Maximum Lift Coefficient

Optimum airfoils in the sense of maximum lift coefficient are obtained by a newly developed method. The maximum lift coefficient is achieved by requiring that the turbulent skin friction be zero in the pressure rise region on the upper surface. Under this constraint, the pressure distribution is optimized. The optimum pressure distribution consists of a uniform stagnation pressure on the lower surface, a uniform minimum pressure on the upper surface immediately downstream of the front stagnation point followed by a Stratford zero skin friction pressure rise. When multiple-element airfoils are under consideration, this optimum pressure distribution appears on every element. The parameters used to specify the pressure distribution on each element are the Reynolds number and the normalized trailing edge velocity. The newly developed method of design computes the velocity distribution on a given airfoil and modifies the airfoil contour in a systematic manner until the desired velocity distribution is achieved. There are no limitations on how many elements the airfoil to be designed can have.

Chen, A. W.↗

Pickup Ion Phase Space Distributions at Titan in a Three Dimensional Exosphere

The composition and structure of neutral exospheres imbedded in moving plasmas can be determined by measurements of the velocity distributions of their pickup ion progeny. In turn, the velocity distributions are dependent on the spatial structure of the neutral source gases. Since Titan's neutral exosphere extends into the Saturn's magnetosphere (or solar wind) and well above its ionopause, it serves as a good place to analyze such characteristics. They are analyzed using pickup ion measurements made by the Cassini Plasma Spectrometer (CAPS) at Titan [e.g., Hartle et al., 2006] and an ion kinetic model. An early version of the model [Hartle and Sittler, 2007] is an expression describing the phase space density of pickup ions, which is derived from the Vlasov equation with an ion source that explicitly accounts for the velocity and spatial variation of the exosphere source gases. The current version used here includes exosphere source gases in three dimensions. A fundamental parameter of the phase space densities is the ratio of the gyroradius to the neutral scale height alpha, = r(sub g)/H. Titan's exosphere structure yields pickup ions whose phase space distributions are beam-like when alpha >> 1 and fluid-like when alpha << 1. Downstream from the source peak, the light pickup ions, with alpha << 1, are easily observed because their phase space densities are almost uniform over the orbit phases. On the other hand, the phase space distributions of the heavier ions, with alpha >> 1, peak over narrow velocity and spatial ranges. This beam-like nature makes it considerably more difficult to observe heavy ions because their downstream positions and viewing directions are narrowly constrained. Examples of these extremes will be discussed.

Hartle, Richard↗

Structural transitions and hysteresis in clump- and stripe-forming systems under dynamic compression

In using numerical simulations, we study the dynamical evolution of particles interacting via competing long-range repulsion and short-range attraction in two dimensions. The particles are compressed using a time-dependent quasi-one dimensional trough potential that controls the local density, causing the system to undergo a series of structural phase transitions from a low density clump lattice to stripes, voids, and a high density uniform state. The compression proceeds via slow elastic motion that is interrupted with avalanche-like bursts of activity as the system collapses to progressively higher densities via plastic rearrangements. The plastic events vary in magnitude from small rearrangements of particles, including the formation of quadrupole-like defects, to large-scale vorticity and structural phase transitions. In the dense uniform phase, the system compresses through row reduction transitions mediated by a disorder-order process. We also characterize the rearrangement events by measuring changes in the potential energy, the fraction of sixfold coordinated particles, the local density, and the velocity distribution. At high confinements, we find power law scaling of the velocity distribution during row reduction transitions. We observe hysteresis under a reversal of the compression when relatively few plastic rearrangements occur. The decompressing system exhibits distinct phase morphologies, and the phase transitions occur at lower compression forces as the system expands compared to when it is compressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

ENERGETIC NEUTRAL ATOMS: AN ADDITIONAL SOURCE FOR HELIOSPHERIC PICKUP IONS

Recently, Schwadron and McComas discussed the possibility of inner source pickup particles originating from the ionization of energetic neutral atoms (ENAs), based on new data from the IBEX mission. This proposition has some interesting features, namely, it might be able to explain why inner source pickup ions (PUIs) have a composition resembling solar abundances and show no indication of overabundance of refractory elements, although this should be expected, if the conventional explanation of solar wind-dust interaction for the origin of this heliospheric component were correct. In this Letter, we explore further consequences for ENA-related PUIs and investigate their velocity distributions. We conclude that this model will not reproduce the observed velocity distributions of inner source PUIs and point out a substantial deviation in their composition. However, it seems likely that the ionization of ENAs as observed with IBEX could contribute a significant amount of heliospheric suprathermal tail ions. Some possible consequences of our investigation for heliospheric particle populations are briefly discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

A time-dependent gyro-kinetic model of thermal ion upflows in the high-latitude F region

Ample evidence supports the significance of the high-latitude ionospheric contribution to magnetospheric plasma. Assuming flux conservation along a flux tube, the upward field-aligned ion flows observed in the magnetosphere require high-latitude ionospheric field-aligned ion upflows of the order of 10(exp 8) to 10(exp 9)/sq cm/s. Since radar and satellite observations of high-latitude F region flows at times exceed this flux requirement by an order of magnitude, the thermal ionospheric upflows are not simply the ionospheric response to a magnetospheric flux requirement. Several ionospheric ion upflow mechanisms have been proposed, but simulations based on fluid theory do not reproduce all the observed features of ionospheric ion upflows. Certain asymmetries in the statistical morphology of high-latitude F region ion upflows suggest that the ion upflows may be generated by ion-neutral frictional heating. We developed a single-component (O(+)), time-dependent gyro-kinetic model of the high-latitude F region response to frictional heating in which the neutral exobase is a discontinuous boundary between fully collisional and collisionless plasmas. The concept of a discontinuous neutreal exobase and the assumption of a constant and uniform polarization electric field reduce the ion velocity distribution function, from which we can compute the ion density, parallel velocity, parallel and perpendicular temperature, and parallel flux. Using our model, we simulated the response of a convecting flux tube between 500 km and 2500 km to various frictional heating inputs; the results were both qualitatively and quantitatively different from fluid model results, which may indicate an inadequacy of the fluid theory approach. The gyro-kinetic frictional heating model responses to the various simulations were qualitatively similar: (1) initial perturbations of all the modeled parameters propagated rapidly up the flux tube, (2) transient values of the ion parallel velocity, temperature, and flux exceeded 3 km/s, 2 x 10(exp 4) K, and 10(exp 9)/sq cm/s, respectively, (3) a second transient regime developed wherein the parallel temperature drops to very low values (a few hundred Kelvins), and (4) well after heating ceased, large parallel temperatures and large downward parallel velocities and fluxes developed as the flux tube slowly returned to diffusive equilibrium. The ion velocity distributions during the simulation are often non-Maxwellian and are sometimes composed of two distinct ion populations.

Loranc, M.↗