Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

The Thomson scattering system on the lithium tokamak experiment

The lithium tokamak experiment (LTX) is a spherical tokamak with R{sub 0}=0.4 m, a=0.26 m, B{sub TF}{approx}3.4 kG, I{sub P}{approx}400 kA, and pulse length {approx}0.25 s. The goal of LTX is to investigate tokamak plasmas that are almost entirely surrounded by a lithium-coated plasma-facing shell conformal to the last closed magnetic flux surface. Based on previous experimental results and simulation, it is expected that the low-recycling liquid lithium surfaces will result in higher temperatures at the plasma edge, flatter overall temperature profiles, centrally peaked density profiles, and an increased confinement time. To test these predictions, the electron temperature and density profiles in LTX will be measured by a multipoint Thomson scattering system. Initially, TS measurements will be made at up to 12 simultaneous points between the plasma center and plasma edge. Later, high resolution edge measurements will be deployed to study the lithium edge physics in greater detail. Technical challenges to implementing the TS system included limited 'line-of-sight' access to the plasma due to the plasma-facing shell and problems associated with the presence of liquid lithium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diamagnetic loop for the first plasma in the KSTAR machine

The diamagnetic loop (DL) is installed for the plasma diamagnetic measurement at the first plasma in the Korea superconducting tokamak advanced research (KSTAR) machine. Experimental results from the position measurement of the DL inside the KSTAR vacuum vessel and the vacuum flux measurement by using the DL for the evaluation of the geometrical data and the balance coefficient of the DL for the compensation of the vacuum flux in the diamagnetic measurement are described. In addition, a preliminary work of an instrument for a hardware compensation of the vacuum flux is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accuracy of EFIT equilibrium reconstruction with internal diagnostic information at JET

In tokamak experiments, equilibrium reconstruction codes are used to calculate the location of the last closed flux surface, to map diagnostic information, and to derive important properties like current density and safety factor. At JET, the equilibrium code EFIT is automatically executed after each discharge. For speed and robustness, intershot EFIT is based on magnetic probe measurements only. As a consequence, the intershot profiles of the safety factor can be wrong for a variety of plasma scenarios. Internal diagnostic information, the pitch angle as measured with the motional stark effect, Faraday rotation angles, as well as pressure profile information can increase the accuracy of the EFIT equilibrium. In this paper, the accuracy of the internal diagnostics at JET and their impact on the EFIT results are discussed in detail. The influence of control parameters like the form of the test functions for ff{sup '} and p{sup '} on the equilibrium is investigated. The q{sub min} from this analysis agrees with information from magnetohydrodynamics analysis (e.g., Alfven cascades and sawtooth analysis) to within 10%-15%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Poloidal mode analysis of magnetic probe data in a spherical tokamak configuration

A method to determine the poloidal mode number m in a spherical tokamak based on magnetic probe data was developed. Perturbed magnetic fields at Mirnov coils are calculated for distributed helical filamentary currents on rational surfaces assuming the maximum current amplitude, m and n (toroidal mode number), and the toroidal location of the filaments. These free parameters were determined from the best fit to the measured signals. The residual error was reduced by a factor of 2 by introducing helical filaments instead of toroidal filaments. Using this method, m/n=2/1 and 3/2 modes were identified in Mega-Ampere Spherical Tokamak discharges, and the time evolution of the tearing modes was derived.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validating TRANSP simulations using neutron emission spectroscopy with dual sight lines

A method to generate modeled neutron spectra from bulk and fast ion distributions simulated by TRANSP has been developed. In this paper, modeled data generated from fuel ion distributions modeled with TRANSP is compared to measured data from two neutron spectrometers with different lines of sight; TOFOR with a radial one and the MPRu with a tangential one. The information obtained from the analysis of the measured neutron spectra such as the relative intensity of the emission from different ion populations places additional constraints on the simulation and can be used to adjust the parameters of the simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Feature extraction for improved disruption prediction analysis at JET

Disruptions are major instabilities and remain one of the main problems in tokomaks. Using Joint European Torus database, a disruption predictor is developed by computational methods including supervised learning techniques. The main objectives of the work are to develop accurate automatic classifiers, to test their performances, and to determine how much in advance of the disruption they can operate with acceptable reliability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Systematic and routine analysis of radial correlation reflectometry data in JET

This paper discusses a tool specially developed for the analysis of radial correlation reflectometry data in JET. The tool, which calculates the correlation length and coherent reflection from the raw data, has been designed for offline analysis and to assist diagnostic operators. After being verified in controlled tests using theoretical signals, the tool is validated by means of a study of ITB plasmas in JET.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Classifier based on support vector machine for JET plasma configurations

The last flux surface can be used to identify the plasma configuration of discharges. For automated recognition of JET configurations, a learning system based on support vector machines has been developed. Each configuration is described by 12 geometrical parameters. A multiclass system has been developed by means of the one-versus-the-rest approach. Results with eight simultaneous classes (plasma configurations) show a success rate close to 100%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral resolution measurement of an x-ray imaging crystal spectrometer for KSTAR

A spectral resolution measurement of the x-ray imaging crystal spectrometer for the Korea Superconducting Tokamak Advanced Research machine utilizing a segmented position-sensitive detector and time-to-digital converter based delay-line readout electronics was performed by using an x-ray tube in a laboratory. The measured spectral resolution is about 12 600, which means the actual energy resolution is 0.32 eV for the x-ray tube's bremsstrahlung peak energy of 4 keV. The results from the spectral resolution measurement are described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Explicit Runge-Kutta integrator with Hamiltonian correction for long-time simulations of guiding-center orbit in tokamak configurations

Hamiltonian correction method is proposed to improve the variable time-step fourth-order Runge-Kutta methods in computing guiding-center orbits in a tokamak. It is found that the new method can significantly improve the computation efficiency of the conventional Runge-Kutta method in simulation of the long-time behavior of the guiding-center orbits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Korea superconducting tokamak advanced research vacuum and gas puffing system

A piezoelectric valve, which has a flow rate of about 463 mbar l/s, has been installed to fuel the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. The valve flow rate is in situ calibrated by analyzing the pressure rise curve while fueling the vessel at a constant rate. The calibration method and results are presented. In addition to the flow rate, other vacuum system parameters, such as the pumping speed and the vessel volume, were experimentally obtained. Based on these measurements, a KSTAR vacuum system simulator was developed to calculate the valve drive signal to obtain a programmed pressure trace. An arbitrarily shaped pressure trace was successfully controlled in KSTAR with this hardware and software system.

36 MATERIALS SCIENCE↗

Characterization of self-similarity properties of turbulence in magnetized plasmas

The understanding of turbulence in magnetized plasmas and its role in the cross field transport is still greatly incomplete. Several previous works reported on evidences of long-time correlations compatible with an avalanche-type of radial transport. Persistence properties in time records have been deduced from high values of the Hurst exponent obtained with the rescaled range R/S analysis applied to experimental probe data acquired in the edge of tokamaks. In this paper the limitations of this R/S method, in particular when applied to signals having mixed statistics are investigated, and the great advantages of the wavelets decomposition as a tool to characterize the self-similarity properties of experimental signals are highlighted. Furthermore the analysis of modified simulated fractional Brownian motions (fBm) and fractional Gaussian noises (fGn) allows us to discuss the relationship between high values of the Hurst exponent and long range correlations. It is shown that for such simulated signals with mixed statistics persistence at large time scales can still reflect the self-similarity properties of the original fBm and do not imply the existence of long range correlations, which are destroyed. It is thus questionable to assert the existence of long range correlations for experimental signals with non-Gaussian and mixed statistics just from high values of the Hurst exponent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Variational derivation of the dispersion relation of kinetic coherent modes in the acoustic frequency range in tokamaks

In the present paper, we compare two modes with frequencies belonging to the acoustic frequency range: the geodesic acoustic mode (GAM) and the Beta Alfven eigenmode (BAE). For this, a variational gyrokinetic energy principle coupled to a Fourier sidebands expansion is developed. High order finite Larmor radius and finite orbit width effects are kept. Their impact on the mode structures and on the Alfven spectrum is calculated and discussed. We show that in a local analysis, the degeneracy of the electrostatic GAM and the BAE dispersion relations is verified to a high order and based in particular on a local poloidal symmetry of the two modes. When a more global point of view is taken, and the full radial structures of the modes are computed, differences appear. The BAE structure is shown to have an enforced localization, and to possibly connect to a large magnetohydrodynamic structure. On the contrary, the GAM is seen to have a wavelike, nonlocalized structure, as long as standard slowly varying monotonic profiles are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The convergence of analytic high-{beta} equilibrium in a finite aspect ratio tokamak

The characteristics of near-unity-{beta} equilibria are investigated with two codes. CUBE is a multigrid Grad-Shafranov solver [Gourdain et al., J. Comput. Phys. 216, 275 (2006)], and Ophidian was written to compute solutions using analytic unity-{beta} equilibria [Cowley et al., Phys. Fluids B 3, 2066 (1991)]. Results from each method are qualitatively and quantitatively compared across a spectrum of mutually relevant parameters. These comparisons corroborate the theoretical results and provide benchmarks for high-resolution numerical results available from CUBE. Both tools facilitate the exploration of the properties of high-{beta} equilibria, such as a highly diamagnetic plasma and its ramifications for stability and transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of the parallel electron dynamics and finite ion temperature on the plasma blob propagation in the scrape-off layer

A new three-dimensional model for the warm-ion turbulence at the tokamak edge plasma and in the scrape-off layer is proposed, and used to study the dynamics of plasma blobs in the scrape-off layer. The model is based on the nonlinear interchange mode, coupled with the nonlinear resistive drift mode, in the presence of the magnetic curvature drive, the density inhomogeneity, the electron dynamics along the open magnetic field lines, and the electron-ion and electron-neutral collisions. Within the present model, the effect of the sheath resistivity decreases with the distance from the wall, resulting in the bending and the break up of the plasma blob structure. Numerical solutions exhibit the coupling of interchange modes with nonlinear drift modes, causing the collapse of the blob in the lateral direction, followed by a clockwise rotation and radial propagation. The symmetry breaking, caused both by the parallel resistivity and the finite ion temperature, introduces a poloidal component in the plasma blob propagation, while the overall stability properties and the speed are not affected qualitatively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction of chaotic particle transport driven by drift waves in sheared flows

Investigations of chaotic particle transport by drift waves propagating in the edge plasma of tokamaks with poloidal zonal flow are described. For large aspect ratio tokamaks, the influence of radial electric field profiles on convective cells and transport barriers, created by the nonlinear interaction between the poloidal flow and resonant waves, is investigated. For equilibria with edge shear flow, particle transport is seen to be reduced when the electric field shear is reversed. The transport reduction is attributed to the robust invariant tori that occur in nontwist Hamiltonian systems. This mechanism is proposed as an explanation for the transport reduction in Tokamak Chauffage Alfven Bresilien [R. M. O. Galvao et al., Plasma Phys. Controlled Fusion 43, 1181 (2001)] for discharges with a biased electrode at the plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗