Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Electrostatic transport in L-mode scrape-off layer plasmas of Tore Supra tokamak. II. Transport by fluctuations

The turbulent transport of particles is investigated using rake probes at the top of the scrape-off layer (SOL) of circular ohmically heated L-mode plasmas in the Tore Supra tokamak [G. Giruzzi et al., Nucl. Fusion 49, 104010 (2009)]. Both radial and poloidal non-linear fluxes are estimated by means of two reciprocating arrays separated toroidally by 120 Degree-Sign . The time average of the radial (poloidal) flux is positive (negative) through the whole SOL profile. The respective effective transport velocity are about {sub t} Almost-Equal-To 30m s{sup -1} and {sub t} Almost-Equal-To -60m s{sup -1} close to the last closed flux surface. Both components present a standard deviation about 10 times higher than their respective mean amplitude, and time-distributions highly skewed toward values of the same sign as their mean values. The existence of a nonlinear poloidal flux is associated with the local tilt of filament eddies due to electric and magnetic shear. At the last closed flux surface, where plasma filaments experience their early life, the orientation of the velocity field is consistent with structure dynamics which originate from the outboard midplane and spread along field lines toward the rest of the poloidal section. The localized tilt of the eddy structures corresponds to the effect of the magnetic shear. Further into the SOL, the orientation of the velocity field evolves along radius in agreement with a simple model of propagating filaments progressively tilted by an electric shear. The combined effects of electric and magnetic shear on the eddy tilting have potentially a crucial impact on the existence of a Reynolds stress {sub t} component, which is strongly poloidally asymmetric at the edge of tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation of current-filament dynamics and relaxation in the Pegasus Spherical Tokamak

Nonlinear numerical computation is used to investigate the relaxation of non-axisymmetric current-channels from washer-gun plasma sources into 'tokamak-like' plasmas in the Pegasus toroidal experiment [Eidietis et al. J. Fusion Energy 26, 43 (2007)]. Resistive MHD simulations with the NIMROD code [Sovinec et al. Phys. Plasmas 10(5), 1727-1732 (2003)] utilize ohmic heating, temperature-dependent resistivity, and anisotropic, temperature-dependent thermal conduction corrected for regions of low magnetization to reproduce critical transport effects. Adjacent passes of the simulated current-channel attract and generate strong reversed current sheets that suggest magnetic reconnection. With sufficient injected current, adjacent passes merge periodically, releasing axisymmetric current rings from the driven channel. The current rings have not been previously observed in helicity injection for spherical tokamaks, and as such, provide a new phenomenological understanding for filament relaxation in Pegasus. After large-scale poloidal-field reversal, a hollow current profile and significant poloidal flux amplification accumulate over many reconnection cycles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-frequency linear-mode regimes in the tokamak scrape-off layer

Motivated by the wide range of physical parameters characterizing the scrape-off layer (SOL) of existing tokamaks, the regimes of low-frequency linear instabilities in the SOL are identified by numerical and analytical calculations based on the linear, drift-reduced Braginskii equations, with cold ions. The focus is put on ballooning modes and drift wave instabilities, i.e., their resistive, inertial, and ideal branches. A systematic study of each instability is performed, and the parameter space region where they dominate is identified. It is found that the drift waves dominate at high R/L{sub n}, while the ballooning modes at low R/L{sub n}; the relative influence of resistive and inertial effects is discussed. Electromagnetic effects suppress the drift waves and, when the threshold for ideal stability is overcome, the ideal ballooning mode develops. Our analysis is a first stage tool for the understanding of turbulence in the tokamak SOL, necessary to interpret the results of non-linear simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the fast ion slowing-down times in the HL-2A tokamak and comparison to classical theory

Physics related to fast ions in magnetically confined fusion plasmas is a very important issue, since these particles will play an important role in future burning plasmas. Indeed, they will act as primary heating source and will sustain the self-ignited condition. To measure the fast ion slowing-down times in a magnetohydrodynamic-quiescent plasmas in different scenarios, very short pulses of a deuterium neutral beam, so-called 'blip,' with duration of about 5 ms were tangentially co-injected into a deuterium plasmas at the HuanLiuqi-2A (commonly referred to as HL-2A) tokamak [L. W. Yan, Nucl. Fusion 51, 094016 (2011)]. The decay rate of 2.45 MeV D-D fusion neutrons produced by beam-plasma reactions following neutral beam termination was measured by means of a {sup 235}U fission chamber. Experimental results were compared with those predicted by a classical slowing-down model. These results show that the fast ions are well confined with a peaked profile and the ions are slowed down classically without significant loss in the HL-2A tokamak. Moreover, it has been observed that during electron cyclotron resonance heating the fast ions have a longer slowing-down time and the neutron emission rate decay time becomes longer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear canonical gyrokinetic Vlasov equation and computation of the gyrocenter motion in tokamaks

The nonlinear canonical gyrokinetic Vlasov equation is obtained from the nonlinear noncanonical gyrokinetic theory using the property of the coordinate transform. In the linear approximation, it exactly recovers the previous linear canonical gyrokinetic equations derived by the Lie-transform perturbation method. The computation of the test particle gyrocenter motion in tokamaks with a large magnetic perturbation is presented and discussed. The numerical results indicate that the second-order gyrocenter Hamiltonian is important for the gyrocenter motion of the trapped electron in tokamaks with a large magnetic perturbation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification and control of plasma vertical position using neural network in Damavand tokamak

In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg-Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Core-ion temperature measurement of the ADITYA tokamak using passive charge exchange neutral particle energy analyzer

Core-ion temperature measurements have been carried out by the energy analysis of passive charge exchange (CX) neutrals escaping out of the ADITYA tokamak plasma (minor radius, a= 25 cm and major radius, R= 75 cm) using a 45 Degree-Sign parallel plate electrostatic energy analyzer. The neutral particle analyzer (NPA) uses a gas cell configuration for re-ionizing the CX-neutrals and channel electron multipliers (CEMs) as detectors. Energy calibration of the NPA has been carried out using ion-source and {Delta}E/E of high-energy channel has been found to be {approx}10%. Low signal to noise ratio (SNR) due to VUV reflections on the CEMs was identified during the operation of the NPA with ADITYA plasma discharges. This problem was rectified by upgrading the system by incorporating the additional components and arrangements to suppress VUV radiations and improve its VUV rejection capabilities. The noise rejection capability of the NPA was experimentally confirmed using a standard UV-source and also during the plasma discharges to get an adequate SNR (>30) at the energy channels. Core-ion temperature T{sub i}(0) during flattop of the plasma current has been measured to be up to 150 eV during ohmically heated plasma discharges which is nearly 40% of the average core-electron temperature (typically T{sub e}(0) {approx} 400 eV). The present paper describes the principle of tokamak ion temperature measurement, NPA's design, development, and calibration along with the modifications carried out for minimizing the interference of plasma radiations in the CX-spectrum. Performance of the NPA during plasma discharges and experimental results on the measurement of ion-temperature have also been reported here.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Poloidal flow damping inside transport barriers in a tokamak

The poloidal flow in a tokamak is damped by collisions. Thus, the poloidal damping can be described by the neoclassical theory. The effective poloidal Mach number, M{sub p}, can be of the order of one or higher inside transport barriers in a tokamak. It is found that the poloidal damping rate decreases exponentially as the effective poloidal Mach number increases. The poloidal damping rate is reduced by one order of magnitude in the presence of sonic M{sub p}. We also found that the ion plasma viscosity becomes negligible compared with the electron plasma viscosity when M{sub p}>1.5. In this case, the poloidal flow is damped by electron collisions rather than ion collisions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Data processing and analysis of the imaging Thomson scattering diagnostic system on HT-7 tokamak

A high spatial resolution imaging Thomson scattering diagnostic system was developed in ASIPP (Institute of Plasma Physics, Chinese Academy of Sciences). After about one month trial running on the superconducting HT-7 (Hefei Tokamak-7) tokamak, the system was proved to be capable of measuring plasma electron temperature. The system setup and data calibration are described in this paper and then the instrument function is studied in detail, as well as the measurement capability, an electron temperature of 50 eV to 2 keV and density beyond 1 Multiplication-Sign 10{sup 19} m{sup -3}. Finally, the data processing method and experimental results are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of magnetohydrodynamic modes during sawteeth in tokamak plasmas

A dynamical analysis applied to a reduced resistive magnetohydrodynamics model is shown to explain the chronology of the nonlinear destabilization of modes observed in tokamak sawteeth. A special emphasis is put on the nonlinear self-consistent perturbation of the axisymmetric m = n = 0 mode that manifests through the q-profile evolution. For the very low fusion-relevant resistivity values, the q-profile is shown to remain almost unchanged on the early nonlinear timescale within the central tokamak region, which supports a partial reconnection scenario. Within the resistive region, indications for a local flattening or even a local reversed-shear of the q-profile are given. The impact of this ingredient in the occurrence of the sawtooth crash is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Geodesic acoustic modes in toroidally rotating tokamaks with an arbitrary β

Theoretical research on the geodesic acoustic mode (GAM) induced by the equilibrium toroidal rotation flow (ETRF) in the tokamak plasmas with an arbitrary β is performed by using the ideal magnetohydrodynamic model, where β is the ratio of the plasma pressure and magnetic field pressure. Two equations determining the poloidal displacement ξ{sub θ} and the divergence of the Lagrangian perturbation are obtained and suitable for arbitrary cross-section tokamaks with large-aspect-ratios. The dispersion relations are then derived for two different coupling patterns by assuming ξ{sub ±2}=0 and ξ{sub ±4}=0, respectively, where ξ{sub m}=(1/2π)∫ξ{sub θ}e{sup imθ}dθ with θ being the poloidal angle under the circular cross-section condition. In both patterns, the ETRF will increase the frequencies of the GAMs but β can decrease them. The GAM for ξ{sub ±2}=0 has a larger frequency than GAM for ξ{sub ±4}=0.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of plasma surface interactions on tokamak startup

The startup phase of a tokamak is a complex phenomenon involving burnthrough of the low-Z impurities and rampup of I{sub p}, the plasma current. The design considerations of a tokamak are closely connected with the startup modeling. Plasma evolution is analysed using a zero-dimensional model. The particle and energy balance is considered of two subclasses of plasmas which are penetrable by neutral gas, together with another component, neutrals trapped in the wall. The first subclass includes plasmas being penetrated by slow neutrals of (∼few eV) temperature. The second includes plasmas being penetrated only by fast neutrals having a temperature comparable to that of the ions. The impact of impurities on energy balance is considered through their generation by ion induced desorption of adsorbed oxygen on the first wall and physical and chemical sputtering of carbon. The paper demonstrates self-consistently that the evolution of initial phase of the discharge is intimately linked to the condition of the plasma facing components (PFCs) and the resultant plasma surface interactions.

36 MATERIALS SCIENCE↗

Momentum transport in the vicinity of q{sub min} in reverse shear tokamaks due to ion temperature gradient turbulence

We present an analytic study of momentum transport of tokamak plasmas in the vicinity of minimum safety factor (q) position in reversed magnetic shear configuration. Slab ion temperature gradient modes with an equilibrium flow profile are considered in this study. Quasi-linear calculations of momentum flux clearly show the novel effects of q-curvature on the generation of intrinsic rotation and mean poloidal flow without invoking reflectional symmetry breaking of parallel wavenumber (k{sub ∥}). This q-curvature effect originates from the inherent asymmetry in k{sub ∥} populations with respect to a rational surface due to the quadratic proportionality of k{sub ∥} when q-curvature is taken into account. Discussions are made of possible implications of q-curvature induced plasma flows on internal transport barrier formation in reversed shear tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure of micro-instabilities in tokamak plasmas: Stiff transport or plasma eruptions?

Solutions to a model 2D eigenmode equation describing micro-instabilities in tokamak plasmas are presented that demonstrate a sensitivity of the mode structure and stability to plasma profiles. In narrow regions of parameter space, with special plasma profiles, a maximally unstable mode is found that balloons on the outboard side of the tokamak. This corresponds to the conventional picture of a ballooning mode. However, for most profiles, this mode cannot exist, and instead, a more stable mode is found that balloons closer to the top or bottom of the plasma. Good quantitative agreement with a 1D ballooning analysis is found, provided the constraints associated with higher order profile effects, often neglected, are taken into account. A sudden transition from this general mode to the more unstable ballooning mode can occur for a critical flow shear, providing a candidate model for why some experiments observe small plasma eruptions (Edge Localised Modes, or ELMs) in place of large Type I ELMs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Survivability of dust in tokamaks: Dust transport in the divertor sheath

The survivability of dust being transported in the magnetized sheath near the divertor plate of a tokamak and its impact on the desired balance of erosion and redeposition for a steady-state reactor are investigated. Two different divertor scenarios are considered. The first is characterized by an energy flux perpendicular to the plate q{sub 0}≃1 MW/m{sup 2} typical of current short-pulse tokamaks. The second has q{sub 0}≃10 MW/m{sup 2} and is relevant to long-pulse machines like ITER or Demonstration Power Plant. It is shown that micrometer dust particles can survive rather easily near the plates of a divertor plasma with q{sub 0}≃1 MW/m{sup 2} because thermal radiation provides adequate cooling for the dust particle. On the other hand, the survivability of micrometer dust particles near the divertor plates is drastically reduced when q{sub 0}≃10 MW/m{sup 2}. Micrometer dust particles redeposit their material non-locally, leading to a net poloidal mass migration across the divertor. Smaller particles (with radius ∼0.1 μm) cannot survive near the divertor and redeposit their material locally. Bigger particle (with radius ∼10 μm) can instead survive partially and move outside the divertor strike points, thus causing a net loss of divertor material to dust accumulation inside the chamber and some non-local redeposition. The implications of these results for ITER are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of a radial fractional transport model with tokamak experiments

A radial fractional transport model [Kullberg et al., Phys. Rev. E 87, 052115 (2013)], that correctly incorporates the geometric effects of the domain near the origin and removes the singular behavior at the outer boundary, is compared to results of off-axis heating experiments performed in the Rijnhuizen Tokamak Project (RTP), ASDEX Upgrade, JET, and DIII-D tokamak devices. This comparative study provides an initial assessment of the presence of fractional transport phenomena in magnetic confinement experiments. It is found that the nonlocal radial model is robust in describing the steady-state temperature profiles from RTP, but for the propagation of heat waves in ASDEX Upgrade, JET, and DIII-D the model is not clearly superior to predictions based on Fick's law. However, this comparative study does indicate that the order of the fractional derivative, α, is likely a function of radial position in the devices surveyed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear gyrokinetic theory based on a new method and computation of the guiding-center orbit in tokamaks

The nonlinear gyrokinetic theory in the tokamak configuration based on the two-step transform is developed; in the first step, we transform the magnetic potential perturbation to the Hamiltonian part, and in the second step, we transform away the gyroangle-dependent part of the perturbed Hamiltonian. Then the I-transform method is used to decoupled the perturbation part of the motion from the unperturbed motion. The application of the I-transform method to the computation of the guiding-center orbit and the guiding-center distribution function in tokamaks is presented. It is demonstrated that the I-transform method of the orbit computation which involves integrating only along the unperturbed orbit agrees with the conventional method which integrates along the full orbit. A numerical code based on the I-transform method is developed and two numerical examples are given to verify the new method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent advances in long-pulse high-confinement plasma operations in Experimental Advanced Superconducting Tokamak

A long-pulse high confinement plasma regime known as H-mode is achieved in the Experimental Advanced Superconducting Tokamak (EAST) with a record duration over 30 s, sustained by Lower Hybrid wave Current Drive (LHCD) with advanced lithium wall conditioning and divertor pumping. This long-pulse H-mode plasma regime is characterized by the co-existence of a small Magneto-Hydrodynamic (MHD) instability, i.e., Edge Localized Modes (ELMs) and a continuous quasi-coherent MHD mode at the edge. We find that LHCD provides an intrinsic boundary control for ELMs, leading to a dramatic reduction in the transient power load on the vessel wall, compared to the standard Type I ELMs. LHCD also induces edge plasma ergodization, broadening heat deposition footprints, and the heat transport caused by ergodization can be actively controlled by regulating edge plasma conditions, thus providing a new means for stationary heat flux control. In addition, advanced tokamak scenarios have been newly developed for high-performance long-pulse plasma operations in the next EAST experimental campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗