Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

A signal processing view of strip-mapping synthetic aperture radar

The authors derive the fundamental strip-mapping SAR (synthetic aperture radar) imaging equations from first principles. They show that the resolution mechanism relies on the geometry of the imaging situation rather than on the Doppler effect. Both the airborne and spaceborne cases are considered. Range processing is discussed by presenting an analysis of pulse compression and formulating a mathematical model of the radar return signal. This formulation is used to obtain the airborne SAR model. The authors study the resolution mechanism and derive the signal processing relations needed to produce a high-resolution image. They introduce spotlight-mode SAR and briefly indicate how polar-format spotlight processing can be used in strip-mapping SAR. They discuss a number of current and future research directions in SAR imaging.

Munson, David C., Jr.↗

Stripping of gas and dust from the elliptical galaxy M86

Past observations of the x ray morphology of M86 have revealed that the galaxy is experiencing ram-pressure stripping due to its large velocity (1500 km s(-1)) relative to the intracluster medium of Virgo (Forman et al. 1979, Fabian, Schwartz, and Forman 1980). Observations indicate that the x ray emitting gas in the plume of M86 is still being produced from the continual heating of gas and dust stripped from nearer the galaxy's center. Researchers obtained two-dimensional Infrared Astronomy Satellite (IRAS) images of M86 which have revealed that there are two spatially separated regions of emission, one at 60 microns and the other at 100 microns of the IRAS wavebands. The 100 microns emission, presumably from cool dust (at approximately 20 K), appears to be located near the center of the galaxy together with HI (detected by Bregman, Roberts and Giovanelli 1988), while the 60 microns emission appears to lie more than 3 arcminutes away from the optical center in a direction slightly south of the center of the plume. Optical images produced by scanning U.K. Schmidt plates, reveal asymmetric isophotal contours along the major axis of the galaxy (first reported by Nulsen and Carter in 1987, which they propose as excess emission due to star formation). This excess optical emission is co-incident with the direction of the 60 micron infra-red emission.

White, D. A.↗

Application of strain gages to measure adhesive strains through the thickness of an adhesively-bonded stiffened strip

The purpose of the study is to measure the through-the-thickness strain distribution in an adhesively bonded stiffened strip subject to four-point bending and to compare the distribution with predicted results. Small-strain gages are used for measuring the normal strain in the adhesive layer of the strip. A total of 16 120-ohm encapsulated strain gages were mounted on the adhesive layer, and the specimen was loaded quasi-statistically and never to failure. Both the experimental and analytical results show good correlation and, in particular, a high strain gradient acting near the edge of the adhesive layer.

Lopez, O. F.↗

The semi-infinite strip problem in the mechanics of composite materials

Many problems, ranging from interface-fiber fracture to determining the strength of fiber-matrix interfaces in composites, can be greatly assisted by a complete understanding of the boundary value problem of a semi-infinite strip. The specific boundary value problem of a semi-infinite strip with symmetric tractions on the transverse edges and normal loads on the end is investigated in the present study. The nature of the singular behavior in the slope of the end vertical displacement at the corner points is found. An asymptotic analysis of the solution shows that, depending on the nature of the applied stresses in the vicinity of the corner points, the singularity in the slope of the end vertical displacement may either be a power or logarithmic type, both, or not exist at all. Illustrative examples, for which exact or numerical results are known, are given. Numerical procedures are also given. The direct application of the results of the paper are illustrated for several problems in the mechanics of composite materials.

Kaw, Autar K.↗

Green's functions for dislocations in bonded strips and related crack problems

Green's functions are derived for the plane elastostatics problem of a dislocation in a bimaterial strip. Using these fundamental solutions as kernels, various problems involving cracks in a bimaterial strip are analyzed using singular integral equations. For each problem considered, stress intensity factors are calculated for several combinations of the parameters which describe loading, geometry and material mismatch.

Ballarini, R.↗

Post-asymptotic giant branch nonradial instability strips

Stability analyses are performed for nonradial g(+)-mode pulsations of postasymptotic AGB stellar models to determine the location of their pulsational instability strips in the Hertzsprung-Russell diagram. Stellar models are analyzed that are assumed to have undergone a major mass loss event either near the tip of the AGB or shortly thereafter and, therefore, consist of a 50-percent carbon 50-percent oxygen core. Their mass is 0.6 solar mass, which is in good agreement with the peak of the observed distribution of white dwarf masses. The results are compared both to the observed planetary nebula nuclei variables and the hot pulsating DO variables. An analysis is also presented of the stability of DB white dwarfs, which have much deeper and stronger convection zones, and an instability strip is found between about 18,000 and 26,000 K approximately as observed for the known variable stars.

Stanghellini, Letizia↗

Grain size control of rhenium strip

Ensuring the desired grain size in the pure Re strip employed by the SP-100 space nuclear reactor design entails the establishment of an initial grain size in the as-received strip and the avoidance of excessive grain growth during subsequent fabrication. Pure Re tapered tensile specimens have been fabricated and tested in order to quantify the effects of grain-boundary migration. Grain size could be rendered fine and uniform by means of a rolling procedure that uses rather large reductions between short intermediate anneals. The critical strain regime varies inversely with annealing temperature.

Schuster, Gary B.↗

Stripping of a planetary nebula from the globular cluster M22

High-spatial resolution imaging in the O III lambda 5007 line of a planetary nebula (PN) in the globular cluster M22 reveals a strongly asymmetric (half-moon shaped) nebular morphology. We confirm that this peculiar morphology is caused by the distortion of stellar ejecta by the ram pressure of the ambient interstellar medium (ISM) through which the cluster is moving with a high velocity of 200 km/s. Emission knots visible in the leading (upstream) nebular section confirm theoretical expectations that the shell should have been fragmented by the Rayleigh-Taylor instability. Stripping of the PN from M22 by the ambient ISM is the first direct evidence for removal of gas from globular clusters. M22 is at a favorable location for the ram-pressure stripping to be effective, only 400 pc below the Galactic plane, well within a 2 kpc thick layer of ionized gas enveloping the plane. Ionized (or possibly neutral) gas in this layer, with a hydrogen density of about 0.1 cu/cm, is responsible for the observed interaction.

Borkowski, Kazimier J.↗

Effects of Nose Shape and Spray Control Strips on Emergence and Planing Spray of Hydro-ski Models

The emergence and planing-spray characteristics of flat-bottom surfaces representative of hydro-skis with various bow shapes and deflectors were investigated for trims of 12° and 20° and a speed of 30 feet per second. The emergence-spray characteristics of the models with various bow shapes were investigated for depths of submersion of the bow from 0.50 inch to -0.50 inch. The planing-spray characteristics of the models with the various deflectors were determined for a draft corresponding to a length-beam ratio of 4 . The emergence- and planing-spray patterns are shown in the photographs taken from forward of and above the models and from the side of the models. The most favorable emergence spray was obtained with a bow of triangular plan form and sharp profile. The greatest improvement in planing spray was obtained with vertical chine strips and a transverse barrier strip located forward of the wetted planing area.

John R McGehee↗

Effect of Threaded and Serrated Holes on the Limited Time and Fatigue Strength of Flat Light-alloy Strips

The investigation was made for the purpose of ascertaining the notch sensitivity of flat strips of light alloy with cylindrical holes under initial tension stress, with special attention to the change in notch-effect factors with the number of load cycles. Then the studies were extended to similar flat strips with pin-loaded holes (tension lugs). This report deals with fatigue tests under initial tension load on flat test specimens of 3116.5 duralumin and AZM 3510.1 electron with plain unloaded and pin-loaded holes (tension lugs) of different forms.

Burnheim, H↗

Bimaterial Thermal Strip With Increased Flexing

In proposed bimaterial thermal strip, one layer has negative coefficient of thermal expansion, thereby increasing difference between coefficients of thermal expansion of two outer layers and consequently increasing flexing caused by change in temperature. Proposed bimaterial strips used in thermostats.

Morrison, Andrew D.↗

Electrode/Dielectric Strip For High-Energy-Density Capacitor

Improved unitary electrode/dielectric strip serves as winding in high-energy-density capacitor in pulsed power supply. Offers combination of qualities essential for high energy density: high permittivity of dielectric layers, thinness, and high resistance to breakdown of dielectric at high electric fields. Capacitors with strip material not impregnated with liquid.

Yen, Shiao-Ping S.↗

Vectorization and parallelization of the finite strip method for dynamic Mindlin plate problems

The finite strip method is a semi-analytical finite element process which allows for a discrete analysis of certain types of physical problems by discretizing the domain of the problem into finite strips. This method decomposes a single large problem into m smaller independent subproblems when m harmonic functions are employed, thus yielding natural parallelism at a very high level. In this paper we address vectorization and parallelization strategies for the dynamic analysis of simply-supported Mindlin plate bending problems and show how to prevent potential conflicts in memory access during the assemblage process. The vector and parallel implementations of this method and the performance results of a test problem under scalar, vector, and vector-concurrent execution modes on the Alliant FX/80 are also presented.

Chen, Hsin-Chu↗

A strip chart recorder pattern recognition tool kit for Shuttle operations

During Space Shuttle operations, Mission Control personnel monitor numerous mission-critical systems such as electrical power; guidance, navigation, and control; and propulsion by means of paper strip chart recorders. For example, electrical power controllers monitor strip chart recorder pen traces to identify onboard electrical equipment activations and deactivations. Recent developments in pattern recognition technologies coupled with new capabilities that distribute real-time Shuttle telemetry data to engineering workstations make it possible to develop computer applications that perform some of the low-level monitoring now performed by controllers. The number of opportunities for such applications suggests a need to build a pattern recognition tool kit to reduce software development effort through software reuse. We are building pattern recognition applications while keeping such a tool kit in mind. We demonstrated the initial prototype application, which identifies electrical equipment activations, during three recent Shuttle flights. This prototype was developed to test the viability of the basic system architecture, to evaluate the performance of several pattern recognition techniques including those based on cross-correlation, neural networks, and statistical methods, to understand the interplay between an advanced automation application and human controllers to enhance utility, and to identify capabilities needed in a more general-purpose tool kit.

Hammen, David G.↗

Ignition, Burning, and Extinction of a Strained Fuel Strip

Flame structure and ignition and extinction processes associated with a strained fuel strip are explored numerically using detailed transport and complex kinetics for a propane-air reaction. Ignition modes are identified that are similar to those predicted by one-step activation energy asymptotics, i.e., modes in which diffusion flames can ignite as independent or dependent interfaces, and modes in which single premixed or partially premixed flames ignite. These ignition modes are found to be dependent on critical combinations of strain rate, fuel strip thickness, and initial reactant temperatures. Extinction in this configuration is seen to occur due to fuel consumption by adjacent flames, although viscosity is seen to have the effect of delaying extinction by reducing the effective strain rate and velocity field experienced by the flames.

Selerland, T.↗

Ignition, Burning and Extinction of a Strained Fuel Strip with Complex Kinetics

Flame structure and ignition and extinction processes associated with a strained fuel strip are explored numerically using detailed transport and complex kinetics for a propane-air reaction. Ignition modes are identified that are similar to those predicted by one-step activation energy asymptotics, i.e., modes in which diffusion flames can ignite as independent or dependent interfaces and modes in which single premixed or partially premixed flames ignite and burn. These ignition modes have been found to be dependent on critical combinations of strain rate, fuel strip thickness and initial reactant temperatures. The formation of NO/NO2 is found to be strongly dependent on strain rate and the local molecular mixing of reactants which occurs as a consequence of strain. Extinction in this configuration is seen to occur due to fuel consumption by adjacent flames, although viscosity is seen to have the effect of delaying extinction by reducing the effective strain rate experienced by the flames. Response of the flames to oscillatory strain rates is seen to be strongly dependent on the amplitude and frequency of the oscillation.

Selerland, T.↗

Analysis of a Generally Oriented Crack in a Functionally Graded Strip Sandwiched Between Two Homogeneous Half Planes

The driving forces for a generally oriented crack embedded in a Functionally Graded strip sandwiched between two half planes are analyzed using singular integral equations with Cauchy kernels, and integrated using Lobatto-Chebyshev collocation. Mixed-mode Stress Intensity Factors (SIF) and Strain Energy Release Rates (SERR) are calculated. The Stress Intensity Factors are compared for accuracy with previously published results. Parametric studies are conducted for various nonhomogeneity ratios, crack lengths. crack orientation and thickness of the strip. It is shown that the SERR is more complete and should be used for crack propagation analysis.

Shbeeb, N.↗

Development of a Broad High-Energy Gamma-Ray Telescope using Silicon Strip Detectors

The research effort has led to the development and demonstration of technology to enable the design and construction of a next-generation high-energy gamma-ray telescope that operates in the pair-production regime (E greater than 10 MeV). In particular, the technology approach developed is based on silicon-strip detector technology. A complete instrument concept based on this technology for the pair-conversion tracker and the use of CsI(T1) crystals for the calorimeter is now the baseline instrument concept for the Gamma-ray Large Area Space Telescope (GLAST) mission. GLAST is NASA's proposed high-energy gamma-ray mission designed to operate in the energy range from 10 MeV to approximately 300 GeV. GLAST, with nearly 100 times the sensitivity of EGRET, operates through pair conversion of gamma-rays and measurement of the direction and energy of the resulting e (+) - e (-) shower. The baseline design, developed with support from NASA includes a charged particle anticoincidence shield, a tracker/converter made of thin sheets of high-Z material interspersed with Si strip detectors, a CsI calorimeter and a programmable data trigger and acquisition system. The telescope is assembled as an array of modules or towers. Each tower contains elements of the tracker, calorimeter, and anticoincidence system. As originally proposed, the telescope design had 49 modules. In the more optimized design that emerged at the end of the grant period the individual modules are larger and the total number in the GLAST array is 25. Also the calorimeter design was advanced substantially to the point that it has a self-contained imaging capability, albeit much cruder than the tracker.

Michelson, Peter F.↗