Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sparse estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

History of the Nuclei Important for Cosmochemistry

An essential aspect of studying the nuclei important for cosmochemistry is their production in stars. Over the grant period, we have further developed the Clemson/American University of Beirut stellar evolution code. Through use of a biconjugate-gradient matrix solver, we now routinely solve l0(exp 6) x l0(exp 6) sparse matrices on our desktop computers. This has allowed us to couple nucleosynthesis and convection fully in the 1-D star, which, in turn, provides better estimates of nuclear yields when the mixing and nuclear burning timescales are comparable. We also have incorporated radiation transport into our 1-D supernova explosion code. We used the stellar evolution and explosion codes to compute iron abundances in a 25 Solar mass star and compared the results to data from RIMS.

Meyer, Bradley S.↗

Joint Retrieval of Surface BRDF from Geostationary and Polar-Orbiting Satellite Sensors

The latest geostationary sensors like GOES 16/17 ABI and Himawari 8/9 AHI provide high frequent observations of the Earth surface with continuously changing solar illumination geometries, which allow us to retrieve the surface Bidirectional Reflectance Distribution Function (BRDF) with dedicated atmospheric correction algorithms like MAIAC (Multi-Angle Implementation of Atmospheric Correction). However, because the viewing geometry of a specific location from the geostationary satellites are fixed, the angular sampling of surface BRDF by GEO (Geostationary Earth Orbit) sensors is far from comprehensive. This study tries to address this issue by exploring a GEO-LEO (Low-Earth-Orbit) synergy, in particular, jointly retrieving surface BRDF parameters with concurrent ABI/AHI and VIIRS top-of-atmosphere (TOA) reflectance for the near-infrared (NIR) band. The NIR band is chosen because the ABI, AHI, and VIIRS instruments have very similar spectral response functions in this band and therefore simplifies the requirements for cross-sensor radiometric calibration. We compile ABI/AHI and VIIRS TOA data with the best quality (cloud-free and low aerosol loading) at chosen AERONET sites. We then run the GeoNEX MAIAC algorithm to retrieve the Ross-Thick-Li-Sparse (RTLS) surface BRDF parameters with or without the AEORNET measured atmospheric aerosol optical depth (AOD) as inputs. The joint retrieval results are considered the best estimate of surface BRDF. We compare the joint BRDF retrievals with the corresponding MAIAC BRDF products, retrieved with ABI/AHI or VIIRS separately, to evaluate their differences. We expect that the jointly retrieved BRDF data are more robust than the standard products and may help us reduce uncertainties in higher-level earth observation satellite products.

Remote Sensing↗

Machine learning and shallow groundwater chemistry to identify geothermal prospects in the Great Basin, USA

This study discovers various geothermal prospects in the Great Basin, USA based on shallow groundwater chemical (geochemical) data. The geochemical data are expected to include hidden (latent) information that is a proxy for geothermal prospectivity. We processed the sparse geochemical data in the Great Basin at 14,341 locations including 18 attributes. Next, a non-negative matrix factorization with customized k-means clustering is applied to the geochemical data matrix that automatically finds three hidden geothermal signatures representing modestly, moderately, and highly confident geothermal prospects. The algorithm also evaluated the probability of occurrence of these types of resources through the studied region. There is a consistency between regional geothermal prospectivity as estimated by our ML methodology and the traditional play fairway analysis conducted over a portion of the study area. We also identify the dominant data attributes associated with each signature. Finally, our ML analyses allow us to reconstruct attributes from sparse into continuous over the study domain. The predicted continuous attributes can be used for future detailed geothermal explorations in the Great Basin.

15 GEOTHERMAL ENERGY↗

Numerical characterization of support recovery in sparse regression with correlated design

Sparse regression is employed in diverse scientific settings as a feature selection method. A pervasive aspect of scientific data is the presence of correlations between predictive features. These correlations hamper both feature selection and estimation and jeopardize conclusions drawn from estimated models. On the other hand, theoretical results on sparsity-inducing regularized regression have largely addressed conditions for selection consistency via asymptotics, and disregard the problem of model selection, whereby regularization parameters are chosen. In this numerical study, we address these issues through exhaustive characterization of the performance of several regression estimators, coupled with a range of model selection strategies. These estimators and selection criteria were examined across correlated regression problems with varying degrees of signal to noise, distributions of non-zero model coefficients, and model sparsity. Our results reveal a fundamental tradeoff between false positive and false negative control in all regression estimators and model selection criteria examined. Additionally, we numerically explore a transition point modulated by the signal-to-noise ratio and spectral properties of the design covariance matrix at which the selection accuracy of all considered algorithms degrades. Overall, we find that SCAD coupled with BIC or empirical Bayes model selection performs the best feature selection across the regression problems considered.

97 MATHEMATICS AND COMPUTING↗

Structural and Stratigraphic Controls on Methane Hydrate occurrence and distribution: Gulf of Mexico, Walker Ridge 313 and Green Canyon 955: Final Report

The goal of this project was to determine structural and stratigraphic controls on hydrate occurrence and distribution in Green Canyon (GC) 955 and Walker Ridge (WR) 313 blocks using seismic and well data. Gas hydrate was discovered in these blocks in coarse- and fine-grained sediments during the 2009 Joint Industrial project (JIP) Leg 11 drilling expedition. Although the immediate interest of the exploration community is exclusively hydrate which is present in coarse–grained sediments, factors that control hydrate and free gas distribution in the two blocks and whether coarse and fine-grained hydrate-bearing units are related in any manner, formed the core of this research. The project spanned from 10/01/2012 to 07/31/2016. In the project, in both the leased blocks, the interval spanning the gas hydrate stability zone (GHSZ) was characterized using a joint analysis of sparse Ocean Bottom Seismic (OBS) and dense, surface–towed multichannel seismic (MCS) data. The project team had the luxury of calibrating their results with two well logs. Advance processing methods such as depth migration and full-waveform inversion (FWI) were used for seismic data analysis. Hydrate quantification was achieved through interpretation of the FWI velocity field using appropriate rock physics models at both blocks. The seismic modeling/inversion methodology (common to both GC955 and WR313 blocks) was as follows. First, the MCS data were depth migrated using a P-wave velocity (VP) model constructed using inversion of reflection arrival times of a few (four in both cases) key horizons carefully picked in the OBS data to farthest possible offsets. Then, the resolution of the traveltime VP model was improved to wavelength scale by inverting OBS gathers up to the highest frequency possible (21.75 Hz for GC955 and 17.5 for WR313) using FWI. Finally, the hydrate saturation (or the volume fraction) was estimated at the well location assuming one of the other hydrate morphology (filling the primary or the secondary porosity) was extrapolated out from the wells using the FWI VP as a guide. General outcomes were as follows. First and foremost, an imaging methodology using sparse seismic data, which is easily replicable at other sites with similar datasets, has been demonstrated. The end product of this methodology at both the leased blocks is quantitative estimates of hydrate distribution. Second, at both locations there is strong evidence that the base of the GHSZ, which does not appear as a clear Bottom Simulating Reflection (BSR), manifests in the VP perturbations created by FWI, suggesting that FWI is sensitive to subtle compositional changes in shallow sediments and establishes it as a valuable tool for investigations of hydrate-bearing basins. Third, through joint interpretation of the depth migrated image and the FWI VP model, how structure and stratigraphy jointly determine hydrate and free gas distribution in both blocks could be clearly visualized. The joint interpretation also suggests that the coarse and fine grained hydrate-bearing sediments at both leased are connected. Site specific results, in addition to general results, are as follows. At GC955 the overlying fine-grained hydrate-bearing unit could have been sourced from the underlying hydrate coarse-grained channel-levee complex through a chimney feature. The channel-levee system at GC955 is compartmentalized by faults, of which only a few may be impermeable. Although compartmentalized, the channel-levee system in the GC955 as a whole might be in communication except selected zones. At WR313 the overlying fine-grained fracture-filled hydrate unit appears to be sourced from below the GHSZ. The reason that only a particular fine-grained unit has hydrate, despite having lower porosity that the bounding units, could be the presence of secondary porosity (such as those formed from clay dewatering under compaction). In conclusion, the project was a pioneering effort in in joint analysis of OBS and MCS datasets for advancing the knowledge about a hydrate and free–gas system dynamics using advanced processing methods such as FWI and depth migration. Results obtained in this project can greatly advance the tools and techniques used for delineating specific hydrate prospects. Results obtained in this project can also be seamlessly incorporated into other DOE funded project on modeling the potential productivity and commercial viability of hydrate from sand-dominated reservoirs. The OBS and MCS data in this project were acquired in 2012 (after the JIP II drilling) by the USGS and therefore the results are a posteriori. Nonetheless, the seismic inversion workflow established through this project can be used to generate various what-if quantification scenarios even in absence of logs and serve as a valuable tool for guiding drilling operations. Results from this project can augment other DOE sponsored projects on determining the commercial viability of methane production from the Gulf of Mexico.

03 NATURAL GAS↗

On the Calculation of Uncertainty Statistics with Error Bounds for CFD Calculations Containing Random Parameters and Fields

This chapter discusses the ongoing development of combined uncertainty and error bound estimates for computational fluid dynamics (CFD) calculations subject to imposed random parameters and random fields. An objective of this work is the construction of computable error bound formulas for output uncertainty statistics that guide CFD practitioners in systematically determining how accurately CFD realizations should be approximated and how accurately uncertainty statistics should be approximated for output quantities of interest. Formal error bounds formulas for moment statistics that properly account for the presence of numerical errors in CFD calculations and numerical quadrature errors in the calculation of moment statistics have been previously presented in [8]. In this past work, hierarchical node-nested dense and sparse tensor product quadratures are used to calculate moment statistics integrals. In the present work, a framework has been developed that exploits the hierarchical structure of these quadratures in order to simplify the calculation of an estimate of the quadrature error needed in error bound formulas. When signed estimates of realization error are available, this signed error may also be used to estimate output quantity of interest probability densities as a means to assess the impact of realization error on these density estimates. Numerical results are presented for CFD problems with uncertainty to demonstrate the capabilities of this framework.

Uncertainty↗

Satellite Based Precipitation Estimation in Orographic Regions within the Southwestern United States

Predicting precipitation-induced landslides requires accurate estimation of orographic precipitation. Many research studies have been done to estimate orographic precipitation using measurement/estimation methods that include rain gauges, ground-based radar, satellite-based estimates, and modeling. Each method has strengths and weaknesses, but none have been able to fully resolve orographic precipitation. The Integrated Multi-satellitE Retrievals for Global Precipitation Measurement Mission (IMERG) early run product provides precipitation estimates at a 0.1° spatial resolution, at half-hour time scales, with only a 4-hour latency. This product is currently used for the global landslide hazard assessment, but there are known issues in mountainous terrain that the IMERG algorithm has not been able to fully resolve; and the sparse gauge density in these regions makes it even more difficult. In this study, precipitation events were identified using high temporal resolution (5-15 minute) precipitation observations from rain gauges in mountainous terrain in the southwestern United States. The brightness temperature from several infrared (IR) bands from the Geostationary Operational Environmental Satellite (GOES) 16 satellite were used to estimate precipitation with a k-nearest neighbor machine learning model. Compared to IMERG, the IR estimates from GOES-16 performed better at predicting gauge-identified precipitation events. Additionally, the IR-only based estimates were able to estimate precipitation when IMERG failed to detect precipitation, false negative events. While additional analysis is needed, results indicate the need for better integration of IR observations for more accurate precipitation estimation in mountainous regions.

Jessica Sutton↗

Neural Networks to Find the Optimal Forcing for Offsetting the Anthropogenic Climate Change Effects

Abstract Of great relevance to climate engineering is the systematic relationship between the radiative forcing to the climate system and the response of the system, a relationship often represented by the linear response function (LRF) of the system. However, estimating the LRF often becomes an ill-posed inverse problem due to high-dimensionality and nonunique relationships between the forcing and response. Recent advances in machine learning make it possible to address the ill-posed inverse problem through regularization and sparse system fitting. Here, we develop a convolutional neural network (CNN) for regularized inversion. The CNN is trained using the surface temperature responses from a set of Green’s function perturbation experiments as imagery input data together with data sample densification. The resulting CNN model can infer the forcing pattern responsible for the temperature response from out-of-sample forcing scenarios. This promising proof of concept suggests a possible strategy for estimating the optimal forcing to negate certain undesirable effects of climate change. The limited success of this effort underscores the challenges of solving an inverse problem for a climate system with inherent nonlinearity. Significance Statement Predicting the climate response for a given climate forcing is a direct problem, while inferring the forcing for a given desired climate response is often an inverse, ill-posed, problem, posing a new challenge to the climate community. This study makes the first attempt to infer the radiative forcing for a given target pattern of global surface temperature response using a deep learning approach. The resulting deeply trained convolutional neural network inversion model shows promise in capturing the forcing pattern corresponding to a given surface temperature response, with a significant implication on the design of an optimal solar radiation management strategy for curbing global warming. This study also highlights the technical challenges that future research should prioritize in seeking feasible solutions to the inverse climate problem.

Ren, Huiying↗

Global Ocean Evaporation Increases Since 1960 in Climate Reanalyses: How Accurate Are They?

AGCMs w/ Specified SSTs (AMIPs) GEOS-5, ERA-20CM Ensembles Incorporate best historical estimates of SST, sea ice, radiative forcing Atmospheric "weather noise" is inconsistent with specified SST. Instantaneous Sfc fluxes can be wrong sign (e.g. Indian Ocean Monsoon, high latitude oceans). Averaging over ensemble members helps isolate SST-forced signal. Reduced Observational Reanalyses: NOAA 20CR V2C, ERA-20C, JRA-55C Incorporate observed Sfc Press (20CR), Marine Winds (ERA-20C) and rawinsondes (JRA-55C) to recover much of true synoptic or weather w/o shock of new sat obs. Comprehensive Reanalyses (MERRA-2) Full suite of observational constraints- both conventional and remote sensing. But... substantial uncertainties owing to evolving satellite observing system. Multi-source Statistically Blended OAFlux, LargeYeager Blend reanalysis, satellite, and ocean buoy information. While climatological biases are removed, non-physical trends or variations in components remain. Satellite Retrievals GSSTF3, SeaFlux, HOAPS3... Global coverage. Retrieved near sfc wind speed, & humidity used with SST to drive accurate bulk aerodynamic flux estimates. Satellite inter-calibration, spacecraft pointing variations crucial. Short record ( late 1987-present). In situ Measurements ICOADS, IVAD, Res Cruises VOS and buoys offer direct measurements. Sparse data coverage (esp south of 30S. Changes in measurement techniques (e.g. shipboard anemometer height).

Climate↗

Sparse expansions of multicomponent oxide configuration energy using coherency and redundancy

We report that compressed sensing has become a widely accepted paradigm to construct high dimensional cluster expansion models used for statistical mechanical studies of atomic configuration in complex multicomponent crystalline materials. However, strict sampling requirements necessary to obtain minimal coherence measurements for compressed sensing to guarantee accurate estimation of model parameters are difficult and in some cases impossible to satisfy due to the inability of physical systems to access certain configurations. Nevertheless, the dependence of energy on atomic configuration can still be adequately learned without these strict requirements by using compressed sensing by way of coherent measurements using redundant function sets known as frames. We develop a particular frame constructed from the union of all occupancy-based cluster expansion basis sets. We illustrate how using this highly redundant frame yields sparse expansions of the configuration energy of complex oxide materials that are competitive and often surpass the prediction accuracy and sparsity of models obtained from standard cluster expansions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probabilistic Damage Characterization Using the Computationally-Efficient Bayesian Approach

This work presents a computationally-ecient approach for damage determination that quanti es uncertainty in the provided diagnosis. Given strain sensor data that are polluted with measurement errors, Bayesian inference is used to estimate the location, size, and orientation of damage. This approach uses Bayes' Theorem to combine any prior knowledge an analyst may have about the nature of the damage with information provided implicitly by the strain sensor data to form a posterior probability distribution over possible damage states. The unknown damage parameters are then estimated based on samples drawn numerically from this distribution using a Markov Chain Monte Carlo (MCMC) sampling algorithm. Several modi cations are made to the traditional Bayesian inference approach to provide signi cant computational speedup. First, an ecient surrogate model is constructed using sparse grid interpolation to replace a costly nite element model that must otherwise be evaluated for each sample drawn with MCMC. Next, the standard Bayesian posterior distribution is modi ed using a weighted likelihood formulation, which is shown to improve the convergence of the sampling process. Finally, a robust MCMC algorithm, Delayed Rejection Adaptive Metropolis (DRAM), is adopted to sample the probability distribution more eciently. Numerical examples demonstrate that the proposed framework e ectively provides damage estimates with uncertainty quanti cation and can yield orders of magnitude speedup over standard Bayesian approaches.

Warner, James E.↗

Microseismic Event Detection Using Multiple Geophone Arrays in Southwestern Utah

We conducted four geophone array experiments in southwestern Utah between July 2016 and October 2017 to characterize regional levels of microseismicity. Each experiment comprised between 48 and 93 geophones and recorded continuously for ~30 days. Using a new frequency domain array-based detector and a traditional STA/LTA detector, we identified 242 earthquakes. We were able to precisely locate 203 of these earthquakes using HYPOINVERSE. During the same time period the University of Utah Seismograph Stations (UUSS) catalog contained 68 earthquakes in the study area, therefore, we were able to locate 135 additional events. We estimate local magnitudes for events using maximum peak-to-trough amplitude and epicentral distance. As expected, our detection threshold becomes lower with higher station density. We find sparse seismicity across the study area apart from two areas that contain clustered and more frequent activity (Dog Valley and Cove Fort), which together account for roughly 70% of the recorded seismicity. A third prominent cluster in the central Mineral Mountains contains about 15% of the recorded seismicity. Lastly, the remainder of the detected seismicity is spread across the study area.

58 GEOSCIENCES↗

Global Landslide Forecasting System for Hazard Assessment and Situational Awareness

Landslides triggered by extreme rainfall can be devastating, resulting in loss of life, property, and infrastructure. Landslide forecasting systems provide an opportunity to build awareness of potential hazards and ultimately take preemptive measures. There is currently a dearth of forecasting systems that provide regional or global coverage, but these systems can offer important situational awareness in data-sparse, ungauged, or large-scale catchments. A near global, primarily satellite-based system calledthe Landslide Hazard Assessment for Situational Awareness (LHASA) provides near real-time estimates of potential landslide hazard and exposure around the world. In this work, a precipitation forecast module is introduced into LHASA to complement the existing LHASA framework and provide an estimate of landslide hazard up to three days in advanceat 1km resolution. The model-based Goddard Earth Observing System-Forward Processing (GEOS-FP) precipitation forecast product is used as the forcing input for the model in place of the satellite-based Integrated Multi-satellitE Retrievals for Global Precipitation Mission product. Soil moisture and snow depth from the GEOS-FP assimilated product are also incorporated. The study period January 2020–January 2021 is usedto test the model performance against the LHASA near real-time estimates at multiple spatiotemporal scales. Validation of the model is carried out using a collection of rainfall-triggered landslide inventories from around the world as case studies to demonstrate the potential utility and limitations of this system.The rescaling of the GEOS-FP precipitation product is a critical step in incorporating the forecasted precipitation data within LHASA-Forecast (LHASA-F). Combining different streams of forecasted data within the LHASA-F framework shows promise, particularly for larger events at the 1-and 2-day lead time for events. Results indicate that for the case studies evaluated, the LHASA-F is generally able to resolve major landslide events triggered by extreme rainfall, such as from tropical cyclones. The analysis shows that landslide forecast outputs may be represented differently depending on the user’s needs. This framework serves as a first milestone in providing a global predictive view of landslide hazard.

Landslide forecasting system↗

Arctic sea ice albedo from AVHRR

The seasonal cycle of surface albedo of sea ice in the Arctic is estimated from measurements made with the Advanced Very High Resolution Radiometer (AVHRR) on the polar-orbiting satellites NOAA-10 and NOAA-11. The albedos of 145 200-km-square cells are analyzed. The cells are from March through September 1989 and include only those for which the sun is more than 10 deg above the horizon. Cloud masking is performed manually. Corrections are applied for instrument calibration, nonisotropic reflection, atmospheric interference, narrowband to broadband conversion, and normalization to a common solar zenith angle. The estimated albedos are relative, with the instrument gain set to give an albedo of 0.80 for ice floes in March and April. The mean values for the cloud-free portions of individual cells range from 0.18 to 0.91. Monthly averages of cells in the central Arctic range from 0.76 in April to 0.47 in August. The monthly averages of the within-cell standard deviations in the central Arctic are 0.04 in April and 0.06 in September. The surface albedo and surface temperature are correlated most strongly in March (R = -0.77) with little correlation in the summer. The monthly average lead fraction is determined from the mean potential open water, a scaled representation of the temperature or albedo between 0.0 (for ice) and 1.0 (for water); in the central Arctic it rises from an average 0.025 in the spring to 0.06 in September. Sparse data on aerosols, ozone, and water vapor in the atmospheric column contribute uncertainties to instantaneous, area-average albedos of 0.13, 0.04, and 0.08. Uncertainties in monthly average albedos are not this large. Contemporaneous estimation of these variables could reduce the uncertainty in the estimated albedo considerably. The poor calibration of AVHRR channels 1 and 2 is another large impediment to making accurate albedo estimates.

Lindsay, R. W.↗

Characterization of OCO-2 and ACOS-GOSAT biases and errors for flux estimates

We characterize the magnitude of seasonally and spatially varying biases in the National Aeronautics and Space Administration (NASA) Orbiting Carbon Observatory-2 (OCO-2) Version 8 (v8) and the Atmospheric CO2 Observations from Space (ACOS) Greenhouse Gas Observing SATellite (GOSAT) version 7.3 (v7.3) satellite CO2 retrievals by comparisons to measurements collected by the Total Carbon Column Observing Network (TCCON), Atmospheric Tomography (ATom) experiment, and National Oceanic and Atmospheric Administration (NOAA) Earth System Research Laboratory (ESRL) and U. S. Department of Energy (DOE) aircraft, and surface stations. Although the ACOS-GOSAT estimates of the column averaged carbon dioxide (CO2) dry air mole fraction (XCO2) have larger random errors than the OCO-2 XCO2 estimates, and the space-based estimates over land have larger random errors than those over ocean, the systematic errors are similar across both satellites and surface types, 0.6 ± 0.1 ppm. We find similar estimates of systematic error whether dynamic versus geometric coincidences or ESRL/DOE aircraft versus TCCON are used for validation (over land), once validation and co-location errors are accounted for. We also find that areas with sparse throughput of good quality data (due to quality flags and preprocessor selection) over land have ~double the error of regions of high-throughput of good quality data. We characterize both raw and bias-corrected results, finding that bias correction improves systematic errors by a factor of 2 for land observations and improves errors by ~0.2 ppm for ocean. We validate the lowermost tropospheric (LMT) product for OCO-2 and ACOS-GOSAT by comparison to aircraft and surface sites, finding systematic errors of ~1.1 ppm, while having 2-3 times the variability of XCO2. We characterize the time and distance scales of correlations for OCO-2 XCO2 errors, and find error correlations on scales of 0.3 degrees, 5-10 degrees, and 60 days. We find comparable scale lengths for the bias correction term. Assimilation of the OCO-2 bias correction term is used to estimate flux errors resulting from OCO-2 seasonal biases, finding annual flux errors on the order of 0.3 and 0.4 PgC/yr for Transcom-3 ocean and land regions, respectively.

Susan S Kulawik↗

The sensitivity of core-collapse supernovae to nuclear electron capture

A weak-rate library aimed at investigating the sensitivity of astrophysical environments to variations of electron-capture rates on medium-heavy nuclei has been developed. With this library, the sensitivity of the core-collapse and early post-bounce phases of core-collapse supernovae to nuclear electron capture is examined. The rates are adjusted by factors consistent with uncertainties indicated by comparing theoretical rates to those deduced from charge-exchange and β-decay measurements. To ensure a model-independent assessment, sensitivity studies across a comprehensive set of progenitors and equations of state are performed. We find a +16/−4% range in the mass of the inner core at shock formation and a ±20% range of peak ν{sub e} luminosity during the deleptonization burst. These ranges are five times as large as those seen from a separate progenitor study, where we evaluate the sensitivity of these parameters to 32 presupernova models. Additionally, the simulations are found to be more sensitive to a reduction in electron-capture rates than an enhancement, and specifically to the reduction in rates for neutron-rich nuclei near the N = 50 closed neutron shell. As measurements for medium-heavy (A>65) and neutron-rich nuclei are sparse, and because accurate theoretical models that account for nuclear structure considerations of individual nuclei are not readily available, rates for these nuclei may be overestimated. If more accurate estimates confirm this, results from this study indicate that significant changes to the core-collapse trajectory are expected. For this reason, experimental and theoretical efforts should focus on this region of the nuclear chart.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA Tech Briefs, August 2005

Topics include: Hidden Identification on Parts: Magnetic Machine-Readable Matrix Symbols; System for Processing Coded OFDM Under Doppler and Fading; Multipurpose Hyperspectral Imaging System; Magnetic-Flux-Compensated Voltage Divider; High-Performance Satellite/Terrestrial-Network Gateway; Internet-Based System for Voice Communication With the ISS; Stripline/Microstrip Transition in Multilayer Circuit Board; Dual-Band Feed for a Microwave Reflector Antenna; Quadratic Programming for Allocating Control Effort; Range Process Simulation Tool; Simulator of Space Communication Networks; Computing Q-D Relationships for Storage of Rocket Fuels; Contour Error Map Algorithm; Portfolio Analysis Tool; Glass Frit Filters for Collecting Metal Oxide Nanoparticles; Anhydrous Proton-Conducting Membranes for Fuel Cells; Portable Electron-Beam Free-Form Fabrication System; Miniature Laboratory for Detecting Sparse Biomolecules; Multicompartment Liquid-Cooling/Warming Protective Garments; Laser Metrology for an Optical-Path-Length Modulator; PCM Passive Cooling System Containing Active Subsystems; Automated Electrostatics Environmental Chamber; Estimating Aeroheating of a 3D Body Using a 2D Flow Solver; Artificial Immune System for Recognizing Patterns; Computing the Thermodynamic State of a Cryogenic Fluid; Safety and Mission Assurance Performance Metric; Magnetic Control of Concentration Gradient in Microgravity; Avionics for a Small Robotic Inspection Spacecraft; and Simulation of Dynamics of a Flexible Miniature Airplane.

Source record↗

The Joint Assimilation of Remotely Sensed Leaf Area Index and Surface Soil Moisture into a Land Surface Model

This work tests the hypothesis that jointly assimilating satellite observations of leaf area index and surface soil moisture into a land surface model improves the estimation of land vegetation and water variables. An Ensemble Kalman Filter is used to test such hypothesis across the Contiguous United States during April 2015 – December 2018. The performance of the proposed methodology is assessed for several modeled vegetation and water variables (evapotranspiration, net ecosystem exchange, and soil moisture) in terms of random errors and anomaly correlation coefficients against a set of independent validation datasets (i.e., Global Land Evaporation Amsterdam Model, FLUXCOM, and International Soil Moisture Network). Results show that the assimilation of leaf area index mostly improves the estimation of evapotranspiration and net ecosystem exchange, whereas the assimilation of surface soil moisture alone improves surface soil moisture content, especially in the western US, in terms of both root mean squared error and anomaly correlation coefficient. The joint assimilation of vegetation and soil moisture information combines the results of individual vegetation and soil moisture assimilations and reduces errors (and increases correlations with the reference datasets) in evapotranspiration, net ecosystem exchange, and surface soil moisture simulated by the land surface model. However, because soil moisture satellite observations only provide information on the water content in the top 5 cm of the soil column, the impact of the proposed data assimilation technique on root zone soil moisture is limited. This work moves one step forward in the direction of improving our estimation and understanding of land surface interactions using a multi-variate data assimilation approach, which can be particularly useful in regions of the world where ground observations are sparse or missing altogether.

Data assimilation↗