Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single Crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Surface regulation enables high stability of single-crystal lithium-ion cathodes at high voltage

Abstract Single-crystal cathode materials for lithium-ion batteries have attracted increasing interest in providing greater capacity retention than their polycrystalline counterparts. However, after being cycled at high voltages, these single-crystal materials exhibit severe structural instability and capacity fade. Understanding how the surface structural changes determine the performance degradation over cycling is crucial, but remains elusive. Here, we investigate the correlation of the surface structure, internal strain, and capacity deterioration by using operando X-ray spectroscopy imaging and nano-tomography. We directly observe a close correlation between surface chemistry and phase distribution from homogeneity to heterogeneity, which induces heterogeneous internal strain within the particle and the resulting structural/performance degradation during cycling. We also discover that surface chemistry can significantly enhance the cyclic performance. Our modified process effectively regulates the performance fade issue of single-crystal cathode and provides new insights for improved design of high-capacity battery materials.

25 ENERGY STORAGE↗

Single-Crystallization of O3-Type Layered Oxide Cathode for Na-Ion Battery

The development of high-energy-density Na-ion batteries places significant demands on single-crystal layered oxide cathodes, especially for further high-voltage, solid-state battery scenarios. In the O3-type structure, due to the original sluggish Na ion diffusion kinetics (approximately 1 order of magnitude lower than that of Li-ion), and further hindrance against diffusion kinetics caused by single-crystal architecture, these inherent defects lead to the decline in the electrochemical performance. Herein, we demonstrated that the single crystallization of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode (d 50 = 5.04 μm) aggravates surface-to-bulk phase inhomogeneity distribution, which is attributed to the uneven Na ions extraction. Moreover, the Na-depletion of the surface/shell region not only aggravates Na ion diffusion resistance but also leads to a higher valence state of transition-metal elements (e.g., Ni/Fe) near the surface of the single-crystal particle, which further compromises the cathode-electrolyte interface stability. Furthermore, not limited to revealing the challenges, tuning the particle size and moderating quasi-single-crystal strategies have been proven to effectively mitigate the negative uneven distributions of Na ions, phases, and valence/oxidative states, resulting in efficient modification for single crystallization of Na-layered oxide cathodes.

36 MATERIALS SCIENCE↗

Overcoming Secondary Nucleation of Misoriented Domains during Wafer-Scale Epitaxy of Single-Crystal Graphene on Ge(110)

The wafer-scale synthesis of single-crystal graphene on technologically important substrates is a major challenge inhibiting the development of next-generation devices that harness the exceptional electronic, thermal, and mechanical properties of single-crystal graphene. Here, in this work, the factors controlling the domain orientation of graphene grown epitaxially on Ge(110) are elucidated, and this insight is utilized to produce graphene with minimal polycrystallinity. In the early stages of growth, most graphene islands have unidirectionally aligned lattices. However, we discover a secondary nucleation phenomenon in which misoriented graphene domains nucleate near/from the island edges, introducing defective grain boundaries and significantly increasing polycrystallinity throughout growth. We find that secondary nucleation occurs when islands grow over Ge steps, which form because of an interplay between the island growth and Ge surface topography evolution. Strategies for suppressing secondary nucleation are developed, enabling the synthesis of graphene in which the predominant crystal orientation has high coverage >99% and low rotational spread <0.6°. This work overcomes the irreproducibility of graphene epitaxy on Ge(110) reported in the literature, providing a route toward the large-area synthesis of single-crystal graphene on technologically useful semiconductors.

chemical vapor deposition↗

Dynamic deformation and fracture of single crystal silicon: Fracture modes, damage laws, and anisotropy

Impact fracture of single-crystal Si is critical to long-term reliability of electronic devices and solar cells for its wide use as components or substrates in semiconductor industry. Single-crystal Si is loaded along two different crystallographic directions with a split Hopkinson pressure bar integrated with an in situ x-ray imaging and diffraction system. Bulk stress histories are measured, simultaneously with x-ray phase contrast imaging (XPCI) and Laue diffraction. Damage evolution is quantified with grayscale maps from XPCI. Single-crystal Si exhibits pronounced anisotropy in fracture modes, and thus fracture strengths and damage evolution. For loading along [11¯ 0] and viewing along [001], (1¯1¯0)[11¯ 0] cleavage is activated and induces horizontal primary cracks followed by perpendicular wing cracks. However, for loading along [011¯] and viewing along [111], random nucleation and growth of shear and tensile-splitting crack networks lead to catastrophic failure of materials with no cleavage. The primary-wing crack mode leads to a lower characteristic fracture strength due to predamage, but a more concentrated strength distribution, i.e., a higher Weibull modulus, compared to the second loading case. Furthermore, the sequential primary cracking, wing cracking and wing-crack coalescence processes result in a gradual increase of damage with time, deviating from theoretical predictions. Particle size and aspect ratios of fragments are discussed with postmortem fragment analysis, which verifies fracture modes observed in XPCI.

36 MATERIALS SCIENCE↗

A universal etching method for synthesizing high-performance single crystal cathode materials

LiNi x MnyCo 1-x-y O 2 (NMC) is considered the most appealing cathode material due to its high energy density and low cost. However, the stability and safety concerns, caused by the degradation of polycrystalline cathode materials during cycling, have restricted their practical applications. To overcome this shortcoming, converting polycrystalline cathode to high-performance single-crystal cathode materials becomes an appealing solution. In this work, a universal etching approach is firstly developed to synthesize single-crystal cathode materials. The rate performance of the obtained single-crystal NMC111 is 10–15% more than that of polycrystalline NMC111 whereas the capacity retention of single-crystal NMC111 is enhanced by ~12% after 300 cycles at 0.5C. The obtained single-crystal NMC622 exhibits a pronounced improvement in rate performance, especially at high rates (~28.6% better at 5C and ~129% better at 10C) and has a comparable cycle performance compared to polycrystalline NMC622. Altogether, the findings propose an alternative approach to generate single-crystal particles with high energy density and cycle stability for the next generation lithium-ion batteries.

25 ENERGY STORAGE↗

An Atomic View of Cation Diffusion Pathways from Single‐Crystal Topochemical Transformations

Abstract The diffusion pathways of Li‐ions as they traverse cathode structures in the course of insertion reactions underpin many questions fundamental to the functionality of Li‐ion batteries. Much current knowledge derives from computational models or the imaging of lithiation behavior at larger length scales; however, it remains difficult to experimentally image Li‐ion diffusion at the atomistic level. Here, by using topochemical Li‐ion insertion and extraction to induce single‐crystal‐to‐single‐crystal transformations in a tunnel‐structured V 2 O 5 polymorph, coupled with operando powder X‐ray diffraction, we leverage single‐crystal X‐ray diffraction to identify the sequence of lattice interstitial sites preferred by Li‐ions to high depths of discharge, and use electron density maps to create a snapshot of ion diffusion in a metastable phase. Our methods enable the atomistic imaging of Li‐ions in this cathode material in kinetic states and provide an experimentally validated angstrom‐level 3D picture of atomic pathways thus far only conjectured through DFT calculations.

Handy, Joseph V.↗

Two-dimensional perovskite heterostructures for single crystal semiconductor devices

Two-dimensional (2D) perovskites have gained much attention lately owing to their excellent optoelectronic properties, chemical tunability, and environmental stability. Multiple methods have been devised to synthesize high quality 2D perovskite single crystals, and recent progress in fabricating its heterostructures is notable as well. In particular, with growing interest in 2D van der Waals heterostructures, 2D perovskites have become a strong candidate as a new building block for heterostructures to reveal unique physical properties across different interfaces. Until now, various heterostructure devices of 2D perovskite single crystals with other types of 2D materials such as transition metal dichalcogenides (TMDs) and graphene have been studied, which have shown intriguing results including interlayer excitons and enhanced electronic properties. Here, we introduce various synthetic approaches to realize 2D perovskite single crystals and unique characteristics of their single crystal heterostructures fabricated with precision, possessing sharp interfaces. Moreover, recent studies of semiconductor devices based on 2D perovskite single crystal heterostructures are discussed in-depth. New perspectives to further the horizon in the field of 2D perovskite heterostructures are suggested in this work including the consideration of metal–2D material van der Waals contact, application of dry transfer techniques, electric bias driven ion diffusion studies, and nanocrystal array fabrication. 2D perovskite heterostructure single crystal devices factoring in these novel perspectives will further uncover the true potential of these materials for highly efficient and stable semiconductor devices.

Physics↗

Stabilization of the Polar Structure and Giant Second-Order Nonlinear Response of Single Crystal γ-NaAs 0.95 Sb 0.05 Se 2

The dearth of suitable materials significantly restricts the practical development of infrared (IR) laser systems with highly efficient and broadband tuning. Recently, γ-NaAsSe 2 is reported, and it exhibits a large nonlinear second-harmonic generation (SHG) coefficient of 590 pm V —1 at 2 µm. However, the crystal growth of γ-NaAsSe 2 is challenging because it undergoes a phase transition to centrosymmetric δ-NaAsSe 2 . Herein, the stabilization of non-centrosymmetric γ-NaAsSe 2 by doping the As site with Sb, which results in γ-NaAs 0.95 Sb 0.05 Se 2 is reported. The congruent melting behavior is confirmed by differential thermal analysis with a melting temperature of 450 °C and crystallization temperature of 415 °C. Single crystals with dimensions of 3 mm × 2 mm are successfully obtained via zone refining and the Bridgman method. The purification of the material plays a significant role in crystal growth and results in a bandgap of 1.78 eV and thermal conductivity of 0.79 Wm —1 K —1 . The single-crystal SHG coefficient of γ-NaAs 0.95 Sb 0.05 Se 2 exhibits an enormous value of |d 11 | = 648 ± 74 pm V —1 , which is comparable to that of γ-NaAsSe 2 and ≈20× larger than that of AgGaSe 2 . Importantly, the bandgap of γ-NaAs 0.95 Sb 0.05 Se 2 (1.78 eV) is similar to that of AgGaSe 2 , thus rendering it highly attractive as a high-performing nonlinear optical material.

36 MATERIALS SCIENCE↗

Structurally-driven metal-insulator transition in Ca{sub 2}Ru{sub 1-x}Cr{sub x}O{sub 4} (0{<=}x<0.14): A single crystal X-ray diffraction study

Correlation between structure and transport properties are investigated in high-quality single-crystals of Ca{sub 2}Ru{sub 1-x}Cr{sub x}O{sub 4} with 0<x<0.14 using single crystal X-ray diffraction and by electronic studies. The parent compound was known to exhibit an intriguing first-order structurally driven metal-insulator (MI) transition at 357 K. Upon chromium doping on the ruthenium site, the metal-insulator transition temperature (T{sub MI}) was drastically reduced, and is related to the competition between structural changes that occur upon Cr doping and with decreasing temperature. A strong suppression of structural distortions with increasing Cr substitution was identified. No clear T{sub MI} can be observed when x>13.5% and the system behaves as an insulator. Such a large, sharp metal-insulator transition and tuneable transition temperature may have potential applications in electronic devices. -- Graphical abstract: The metal-insulator transition temperature (T{sub MI}) was drastically reduced by Cr doping, and is closely related to the distortion of structure. Display Omitted Research highlights: {yields} The metal-insulator transition temperature (T{sub MI}) was drastically reduced by doping Cr into Ca{sub 2}RuO{sub 4} single crystal. {yields} Detailed single crystal structural analysis provided important insight into this structurally-driven metal-insulator transition. {yields} Negative Volume Thermal Expansion (NVTE) was observed with increasing temperature.

36 MATERIALS SCIENCE↗

Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li 1.2 Ni 0.2 Mn 0.6 O 2 Cathode

Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathode of Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 with an octahedral morphology of (102) and (003) dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathode. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions, but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single crystal surfaces, more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to the stabilization of surface oxygens. In conclusion, this study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulted phase formation in the rather less explored micron-sized octahedral Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 single crystals, which is key to further exploration of electrochemical properties of cathode in the form of micro-sized single crystal.

25 ENERGY STORAGE↗

Single-crystal silicon optical fiber by direct laser crystallization

Semiconductor core optical fibers with a silica cladding are of great interest in nonlinear photonics and optoelectronics applications. Laser crystallization has been recently demonstrated for crystallizing amorphous silicon fibers into crystalline form. Here we explore the underlying mechanism by which long single-crystal silicon fibers, which are novel platforms for silicon photonics, can be achieved by this process. Using finite element modeling, we construct a laser processing diagram that reveals a parameter space within which single crystals can be grown. Utilizing this diagram, we illustrate the creation of single-crystal silicon core fibers by laser crystallizing amorphous silicon deposited inside silica capillary fibers by high-pressure chemical vapor deposition. The single-crystal fibers, up to 5.1 mm long, have a very welldefined core/cladding interface and a chemically pure silicon core that leads to very low optical losses down to ~0.47-1dB/cm at the standard telecommunication wavelength (1550 nm). Furthermore, tt also exhibits a photosensitivity that is comparable to bulk silicon. Creating such laser processing diagrams can provide a general framework for developing single-crystal fibers in other materials of technological importance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-cavity lasing in optically pumped single crystals of p-sexiphenyl

Organic single-crystal self-cavities are prepared by solution growth of p-sexiphenyl (p-6P). Based on Fabry-Pérot feedback inside a quasi-lozenge-shaped platelet crystal, edge-emitting laser is obtained under optical pumping. The multimode lasing band appears at the 0-1 or 0-2 vibronic progressions depending on the excitation conditions which affect the self-absorption effect. Cavity-size dependence of amplified spontaneous emission (ASE) is investigated with laser-etched single crystals of p-6P. As the cavity length of square-shaped crystal is reduced from 100 to 10 μm, ASE threshold fluence is decreased probably due to size-dependent light confinement in the crystal cavity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave Induced Direct Bonding of Single Crystal Silicon Wafers

We have heated polished doped single-crystal silicon wafers in a single mode microwave cavity to temperatures where surface to surface bonding occurred. The absorption of microwaves and heating of the wafers is attributed to the inclusion of n-type or p-type impurities into these substrates. A cylindrical cavity TM (sub 010) standing wave mode was used to irradiate samples of various geometry's at positions of high magnetic field. This process was conducted in vacuum to exclude plasma effects. This initial study suggests that the inclusion of impurities in single crystal silicon significantly improved its microwave absorption (loss factor) to a point where heating silicon wafers directly can be accomplished in minimal time. Bonding of these substrates, however, occurs only at points of intimate surface to surface contact. The inclusion of a thin metallic layer on the surfaces enhances the bonding process.

Budraa, N. K.↗

Acquisition of Single Crystal Growth and Characterization Equipment

Final Report for DOE Grant No. DE-FG02-04ER46178 'Acquisition of Single Crystal Growth and Characterization Equipment'. There is growing concern in the condensed matter community that the need for quality crystal growth and materials preparation laboratories is not being met in the United States. It has been suggested that there are too many researchers performing measurements on too few materials. As a result, many user facilities are not being used optimally. The number of proficient crystal growers is too small. In addition, insufficient attention is being paid to the enterprise of finding new and interesting materials, which is the driving force behind much of condensed matter research and, ultimately, technology. While a detailed assessment of this situation is clearly needed, enough evidence of a problem already exists to compel a general consensus that the situation must be addressed promptly. This final report describes the work carried out during the last four years in our group, in which a state-of-the-art single crystal growth and characterization facility was established for the study of novel oxides and intermetallic compounds of rare earth, actinide and transition metal elements. Research emphasis is on the physics of superconducting (SC), magnetic, heavy fermion (HF), non-Fermi liquid (NFL) and other types of strongly correlated electron phenomena in bulk single crystals. Properties of these materials are being studied as a function of concentration of chemical constituents, temperature, pressure, and magnetic field, which provide information about the electronic, lattice, and magnetic excitations at the root of various strongly correlated electron phenomena. Most importantly, the facility makes possible the investigation of material properties that can only be achieved in high quality bulk single crystals, including magnetic and transport phenomena, studies of the effects of disorder, properties in the clean limit, and spectroscopic and scattering studies through efforts with numerous collaborators. These endeavors will assist the effort to explain various outstanding theoretical problems, such as order parameter symmetries and electron-pairing mechanisms in unconventional superconductors, the relationship between superconductivity and magnetic order in certain correlated electron systems, the role of disorder in non-Fermi liquid behavior and unconventional superconductivity, and the nature of interactions between localized and itinerant electrons in these materials. Understanding the mechanisms behind strongly correlated electron behavior has important technological implications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From micro- to nano-scale molding of metals : size effect during molding of single crystal Al with rectangular strip punches.

A single crystal Al specimen was molded at room temperature with long, rectangular, strip diamond punches. Quantitative molding response curves were obtained at a series of punch widths, ranging from 5 {micro}m to 550 nm. A significant size effect was observed, manifesting itself in terms of significantly increasing characteristic molding pressure as the punch width decreases to 1.5 {micro}m and below. A detailed comparison of the present strip punch molding results was made with Berkovich pyramidal indentation on the same single crystal Al specimen. The comparison reveals distinctly different dependence of the characteristic pressure on corresponding characteristic length. The present results show the feasibility of micro-/nano-scale compression molding as a micro-/nano-fabrication technique, and offer an experimental test case for size-dependent plasticity theories.

36 MATERIALS SCIENCE↗

Synthesis, growth, structure, mechanical and optical properties of a new semi-organic 2-methyl imidazolium dihydrogen phosphate single crystal

Highlights: • 2MIDP crystals were grown by slow evaporation solution growth technique. • Single crystal XRD revealed self-assembled supramolecular framework. • Z scan technique is employed for third order nonlinear optical susceptibility. • Structure-property correlation is established. - Abstract: A new semi-organic compound, 2-methyl imidazolium dihydrogen phosphate (2MIDP), was prepared and good quality single crystals of 2MIDP were grown by slow evaporation solution growth technique. Crystal structure elucidated using Single crystal XRD showed that 2MIDP crystallizes in monoclinic system with P2{sub 1}/c space group. FT-IR, UV-Vis-NIR, Fluorescence and FT-NMR spectra confirm the molecular structure of 2MIDP. The UV-Vis-NIR spectra established the suitability of the compound for NLO applications. TG-DSC showed that 2MIDP is thermally stable up to 200 °C. Mechanical characteristics like hardness number (H{sub v}), stiffness constant (C{sub 11}), yield strength (σ{sub v}), fracture toughness (K{sub c}) and brittleness index (B{sub i}) were assessed using Vicker’s microhardness tester. Third order nonlinear optical properties determined from Z-scan measurement using femto and picosecond lasers showed two photon reverse saturable absorption. The enhancement of nonlinear optical properties in femto second laser, revealed the suitability of 2MIDP for optical limiting applications.

36 MATERIALS SCIENCE↗

Studies on the nonlinear optical single crystal: Ammonium D,L-tartrate (C{sub 4}H{sub 9}NO{sub 6})

Graphical abstract: (a) Ammonium D,L-tartrate crystal grown by slow evaporation solution technique (SEST). (b) HRXRD recorded for a typical AMT single crystal for (2 2 2) diffracting plane. Highlights: Black-Right-Pointing-Pointer Single crystal of AMT was grown by slow evaporation solution technique for the first time. Black-Right-Pointing-Pointer The crystalline perfection was investigated using HRXRD and chemical etching analysis. Black-Right-Pointing-Pointer The optical quality and mechanical stability of the AMT crystal was studied by UV-Vis-NIR and Vickers microhardness. Black-Right-Pointing-Pointer AMT crystal was thermally stable up to 200 Degree-Sign C. Black-Right-Pointing-Pointer SHG efficiency of AMT is 1.3 times greater than that of KDP sample. -- Abstract: The organic nonlinear optical material ammonium D,L-tartrate single crystal has been successfully grown by slow evaporation solution technique (SEST). The grown crystals were characterized by single crystal XRD and the lattice parameters have been confirmed. The structural perfection of the grown crystal was analyzed by high-resolution X-ray diffraction measurement. The optical transmittance spectrum shows that the material has a good optical transparency in the entire visible region with the UV cut-off wavelength at 234 nm. Thermogravimetric and differential scanning calorimetric measurements were performed to study the thermal properties of the grown crystal. Chemical etching studies were attempted to determine the dislocation density of the grown crystal. Mechanical behavior was assessed using Vickers hardness testing carried out on (0 0 1) crystallographic plane. The Kurtz-Perry powder SHG technique confirms the NLO property of the grown crystal and the efficiency of AMT crystal was found to be 1.3 times that of standard KDP crystal.

36 MATERIALS SCIENCE↗

Giant room-temperature barocaloric effect and pressure-mediated electrocaloric effect in BaTiO{sub 3} single crystal

Barocaloric effect in BaTiO{sub 3} single crystal is studied by a thermodynamic phenomenological model. It is demonstrated that a giant barocaloric effect can be achieved near room temperature with an adiabatic temperature change of more than 3 K and a temperature span about 50 K. As expected, the electrocaloric peak can be shifted towards room temperature by pressure. However, a slight reduction of the electrocaloric peak is found in contrast to relaxor ferroelectrics and LiNbO{sub 3}. We believe that our findings could open a potential route by combining the barocaloric effect and pressure-mediated electrocaloric effect in BaTiO{sub 3} single crystal for cooling devices.

36 MATERIALS SCIENCE↗