Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sheet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Spatial variation of cosmic rays near the heliospheric current sheet

A quantitative comparison between theoretical predictions and observations of the intensity of galactic cosmic rays near the interplanetary current sheet is reported. Comparison of model calculations is made with a statistical analysis of observations of galactic cosmic rays at Earth and the simultaneous position of the current sheet. An ensemble of different current sheet inclinations is used, in order to make the analysis of the computations approximate the method used to analyses the data.

Jokipii, J. R.↗
NASA NTRS1985

Variation of cosmic rays and solar wind properties with respect to the heliospheric current sheet. I - Five-GeV protons and solar wind speed

One of the principal uncertainties in understanding the propagation of cosmic rays in the heliosphere is related to the role of latitudinal transport by gradient and curvature drifts. The steady state distribution of cosmic rays with respect to the heliospheric current sheet or in latitude may possibly provide some information regarding the existing problems. Newkirk and Lockwood (1981) have considered the current sheet with respect to its role as a natural surface of symmetry for the propagation of cosmic rays in the heliosphere. The present investigation represents an extension of this study. Central objectives are related to a determination of the gradient of 5-GeV cosmic rays with respect to the heliospheric current sheet at 1 AU, the possible effect of the solar cycle upon such gradients, and an evaluation of the ability of several theoretical models to explain the gradients.

Newkirk, G., Jr.↗
NASA NTRS1984

Magnetotail energy storage and the variability of the magnetotail current sheet

The antiparallel field configuration in the earth magnetotail is a prime location to search for the important astrophysical process known as magnetic reconnection. The magnetic evidence that reconnection occurs in the earth's magnetotail is that the energy of the tail invariably decreases at the time of global substorm onsets, and that an increased number of closed field lines are seen in the near-earth magnetotail after substorms. This increased northward flux is often convecting earthward from the expected site of the X line after the substorm onset, while southward flux is often convecting tailward. Prior to a substorm, energy accumulates in the tail as the field assumes a more taillike configuration with a smaller field component across the equatorial plane. The high-beta plasma sheet becomes thin and has been observed to be at least as thin as a few thousand km near substorm onset times. The small Bn component and thin plasma sheet are the conditions which favor the onset of the tearing-mode instability, which is thought to lead to neutral-line formation and the reconnection associated with substorm onset. Intervals of weak and highly variable fields in the plasma sheet provide evidence for the tearing-mode instability.

Fairfield, D. H.↗
NASA NTRS1985

Laboratory experiments on reconnection in current sheets

Insights obtained from laboratory experiments concerning the reconnection of current sheets are discussed. Consideration is given to: the nonlocal characteristics of reconnection; the build-up of pinch current sheets; and impulsive flux transfer events. The application of the experimental results to present models of current sheet reconnection during solar flares is also discussed.

Bratenahl, A.↗
NASA NTRS1985

Current sheets in solar flares

Numerical simulations of current sheets in solar flares are described, including new features such as the presence of a shock in Petschek's mechanism and impulsive burst-like reconnection due to secondary tearing and coalescence. The general properties of magnetic reconnection are discussed in connection with the basic requirements of numerical current sheet models. Emphasis is given to the need for realistic criteria for energy balance, the Lundquist number, and line tying in calculations of tearing and reconnection modes. The need for analytical models of current sheet processes to compare with the numerical simulations is also stressed.

Priest, E. R.↗
NASA NTRS1986

Variation of cosmic rays and solar wind properties with respect to the heliospheric current sheet. II - Rigidity dependence of the latitudinal gradient of cosmic rays at 1 AU

The role which empirical determinations of the latitudinal variation of cosmic rays with respect to the current sheet may have in illuminating the importance of the cross-field drift of particles in the large-scale heliospheric magnetic field is discussed. Using K coronameter observations and measured solar wind speeds, the latitudinal gradients have been determined with respect to the current sheet for cosmic rays in four rigidity ranges. Gradients vary between approximately -2 and -50 pct/AU. The rigidity dependence of the decrease of cosmic ray flux with distance from the current sheet lies between the -0.72 to -0.86 power of the rigidity, with the exact dependence being determined by the definition used for the median rigidity of each monitor.

Newkirk, G., Jr.↗
NASA NTRS1986

The effect of the heliospheric current sheet on cosmic ray intensities at solar maximum - Two alternative hypotheses

The capabilities of two alternative models for accounting for the reversal of the solar magnetic field polarity at the point of solar maximum and for the associated modulation of cosmic ray intensities at 1 AU are assessed. One model posits a continuous increase in the inclination of the heliospheric current sheet to a point of verticality at maximum, when it overturns and the reversal occurs. The alternative view is that the sun sheds the magnetic field of the previous cycle and generates a new field of opposite polarity. Some data do exist for a tilted current sheet which increases its tilt with proximity to the solar maximum. However, coronal data also support the presence of isolated regions of anomalous polarity which spread over the surface of the sun as maximum approaches, a condition commensurate with flux shedding. Both models predict heliospheric current sheet configurations which would produce some cosmic ray modulations observed over the course of the solar cycle.

Thomas, B. T.↗
NASA NTRS1986

Latitudinal extent of the heliospheric current sheet and modulation of galactic cosmic rays

Possible correlations were investigated between the modulation of galactic cosmic rays and changes in the maximum heliographic latitude of the heliospheric current sheet during solar maximum. Solar photospheric magnetic field data from 1976-82 were extrapolated by means of potential theory to obtain the maximum latitudinal extent of the current sheet in the northern and southern hemispheres. The latitudinal differences were compared with terrestrial neutron flux data and Pioneer 10 data on cosmic rays with energies below 200 MeV at heliocentric distances of 10-30 AU. Account was taken for the time delay for the solar wind to propagate out to the spacecraft location. The current sheet maxima were nearly symmetrical about the solar equator except during sunspot maxima, when the solar poles were reversing. Significant changes in the latitudinal symmetry were highly correlated with the neutron data and cosmic fluctuations at Pioneer 10. The sensitivity of cosmic rays to the polarity reversals is in accordance with predictions of the gradient drift model.

Smith, E. J.↗
NASA NTRS1986

A statistical study of plasma sheet dynamics using ISEE 1 and 2 energetic particle flux data

Plasma sheet dynamics during substorms are studied by analyzing 461 cases of transient dropout events of the 1.5 and 6-keV particle fluxes detected by ISEE 1 and 2 satellites. The instruments for detecting low- and high-energy particles are described. The spatial distribution of flux dropout events, and the events' relationship to magnetospheric activity level are examined. Substorm events without observed flux dropout events are investigated. The data reveal that the flux dropout distribution is isotropic, between 12-23 earth radii, and is present in the entire nightside plasma sheet; and the substorms without flux dropout are more frequent near earth and magnetospheric flanks. It is observed that tailward of 12 earth radii the flux dropout events and substorms without flux dropout are similar. The Chao et al. (1977) MHD rarefaction wave propagation model and the Hones (1973, 1980) near-tail, X-type magnetic neutral line formation model are discussed and compared to the experimental data. It is noted that neither model explains the plasma sheet dynamics observed.

Dandouras, J.↗
NASA NTRS1986

Neutral sheet crossings by ISEE-3 in the distant magnetotail

Magnetic field data from ISEE-3 in the distant magnetotail at crossings of the field reversal (or neutral sheet) region were analyzed to determine the instantaneous direction of the normal component Bz at the crossing. A crossing identified as being almost always tailward of the steady-state X-line was selected. Data for 1 hr are discussed to illustrate difficulties. One particular smooth crossing shows that complicated microstructure can occur in times less than 1 min. Averaging over long times may eliminate essential information. Inspection of the magnetic field data at the highest resolution, however, shows that the direction of the plasma sheet flows and the sense of Bz across the neutral sheet do not always agree with the reconnection models. Rather, they indicate that the low latitude boundary layer may play a significant role in the dynamics of the magnetotail.

Heikkila, W. J.↗
NASA NTRS1987

Liquid sheet radiator

A new external flow radiator concept, the liquid sheet radiator (LSR), is introduced. The LSR sheet flow is described and an expression for the length/width (l/w), ratio is presented. A linear dependence of l/w on velocity is predicted that agrees with experimental results. Specific power for the LSR is calculated and is found to be nearly the same as the specific power of a liquid droplet radiator, (LDR). Several sheet thicknesses and widths were experimentally investigated. In no case was the flow found to be unstable.

Chubb, Donald L.↗
NASA NTRS1985

Development of powder metallurgy 2XXX series Al alloy plate and sheet materials for high temperature aircraft structural applications, FY 1983/1984

The objective of this investigation is to fabricate and evaluate PM 2124 Al alloy plate and sheet materials according to NASA program goals for damage tolerance and fatigue resistance. Previous research has indicated the outstanding strength-toughness relationship available with PM 2124 Al-Zr modified alloy compositions in extruded product forms. The range of processing conditions was explored in the fabrication of plate and sheet gage materials, as well as the resultant mechanical and metallurgical properties. The PM composition based on Al-3.70 Cu-1.85 Mg-0.20 Mn with 0.60 wt. pct. Zr was selected. Flat rolled material consisting of 0.250 in. thick plate was fabricated using selected thermal mechanical treatments (TMT). The schedule of TMT operations was designed to yield the extreme conditions of grain structure normally encountered in the fabrication of flat rolled products, specifically recrystallized and unrecrystallized. The PM Al alloy plate and sheet materials exhibited improved strength properties at thin gages compared to IM Al alloys, as a consequence of their enhanced ability to inhibit recrystallization and grain growth. In addition, the PM 2124 Al alloys offer much better combinations of strength and toughnessover equivalent IM Al. The alloy microstructures were examined by optical metallographic texture techniques in order to establish the metallurgical basis for these significant property improvements.

Chellman, D. J.↗
NASA NTRS1986

Can prominences form in current sheets

Two-dimensional numerical simulations of the formation of cold condensations in a vertical current sheet have been performed using the radiative, resistive MHD equations with line-tied boundary conditions at one end of the sheet. Prominence-like condensations are observed to appear above and below an X-line produced by the onset of the tearing-mode instability. Cooling in the sheet is initiated by Ohmic decay, with the densest condensations occurring in the region downstream of a fast-mode shock. This shock, which is due to the line-tied boundary conditions, terminates one of the two supermagnetosonic reconnection jets that develop when the tearing is fully developed. The condensation properties of shock waves, which may trigger or considerably enhance the conditions for thermal condensation are emphasized.

Malherbe, J. M.↗
NASA NTRS1986

Neutral sheet crossings by ISEE-3 in the distant magnetotail

The magnetic field data from ISEE-3 in the distant magnetotail at crossings of the field reversal (or neutral sheet) region are analyzed to determine the instantaneous direction of the normal component B(z) at the crossing. Crossings in the middle of the aberrated magnetotail near the apogee A2 of the first deep-tail orbit of ISEE-3 in January-February, 1983 were selected. Data for an interval of one hour is discussed at length to illustrate some of the difficulties that can occur. One particular smooth crossing at 15:56 UT, February 4, 1983, shows that complicated microstructure can occur in times shorter than one minute; averaging over long times may eliminate essential information for this purpose. By inspecting the magnetic field data at the highest resolution, however, it is shown that the direction of the plasma sheet flows and the sense of B(z) across the neutral sheet do not always agree with the reconnection models. Rather, they indicate that the low latitude boundary layer may play a significant role in the dynamics of the magnetotail.

Heikkila, W. J.↗
NASA NTRS1986

Heliospheric current sheet and its solar cycle variations

The three-dimensional structure of the heliospheric current sheet is constructed for Carrington rotations 1647, 1654, 1661, 1667, 1693, 1699, and 1719. These rotations are chosen from different epochs during the sunspot cycle 21, so that geometrical changes of the current sheet during a sunspot cycle can be inferred. Only for relatively simple neutral lines on the source surface, do the structures of the current sheet approximate those envisaged by Svalgaard and Wilcox (1976) and Thomas and Smith (1981).

Akasofu, Syun-Ichi↗
NASA NTRS1986

Thermal catastrophe in the plasma sheet boundary layer

This letter presents a first step towards a substorm model including particle heating and transport in the plasma sheet boundary layer (PSBL). The heating mechanism discussed is resonant absorption of Alfven waves. For some assumed MHD perturbation incident from the tail lobes onto the plasma sheet, the local heating rate in the PSBL has the form of a resonance function of the one-fluid plasma temperature. Balancing the local heating by convective transport of the heated plasma toward the central plasma sheet, an 'equation of state" is found for the steady-state PSBL whose solution has the form of a mathematical catastrophe: at a critical value of a parameter containing the incident power flux, the local density, and the convection velocity, the equilibrium temperature jumps discontinuously. Associating this temperature increase with the abrupt onset of the substorm expansion phase, the catastrophe model indicates at least three ways in which the onset may be triggered. Several other consequences related to substorm dynamics are suggested by the simple catastrophe model.

Smith, Robert A.↗
NASA NTRS1987

The current-voltage relationship in auroral current sheets

The current-voltage relation within narrow auroral current sheets is examined through the use of high-resolution data from the high altitude Dynamics Explorer 1 satellite. The north-south perpendicular electric field and the east-west magnetic field are shown for three cases in which there are large amplitude, oppositely directed paired electric fields and narrow current sheets. These data are shown to indicate that there is a linear Ohm's law relationship between the current density and the parallel potential drop within the narrow current sheets. This linear relationship had previously been verified for large-scale auroral formations greater than 20 km wide at the ionosphere. The evidence shown here extends our knowledge down to the scale size of discrete auroral arcs.

Weimer, D. R.↗
NASA NTRS1987

Rate limits in silicon sheet growth - The connections between vertical and horizontal methods

Meniscus-defined techniques for the growth of thin silicon sheets fall into two categories: vertical and horizontal growth. The interactions of the temperature field and the crystal shape are analyzed for both methods using two-dimensional finite-element models which include heat transfer and capillarity. Heat transfer in vertical growth systems is dominated by conduction in the melt and the crystal, with almost flat melt/crystal interfaces that are perpendicular to the direction of growth. The high axial temperature gradients characteristic of vertical growth lead to high thermal stresses. The maximum growth rate is also limited by capillarity which can restrict the conduction of heat from the melt into the crystal. In horizontal growth the melt/crystal interface stretches across the surface of the melt pool many times the crystal thickness, and low growth rates are achievable with careful temperature control. With a moderate axial temperature gradient in the sheet a substantial portion of the latent heat conducts along the sheet and the surface of the melt pool becomes supercooled, leading to dendritic growth. The thermal supercooling is surpressed by lowering the axial gradient in the crystal; this configuration is the most desirable for the growth of high quality crystals. An expression derived from scaling analysis relating the growth rate and the crucible temperature is shown to be reliable for horizontal growth.

Thomas, Paul D.↗