Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STACKING FAULTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Chemical randomness, lattice distortion and the wide distributions in the atomic level properties in high entropy alloys

High entropy alloys (HEAs) consist of multiple elements present in large proportions that are randomly distributed on a crystal lattice. On the one hand, the presence of multiple elements engenders wide ranges of atomic radii, electronegativities, electron valences and magnetic moments, whereas on the other, the presence of chemical randomness creates unique nearest neighbor environments among the lattice sites. As a result, the symmetry of the energy landscape is broken essentially at each lattice site thereby resulting in highly distorted energy landscapes. At the atomistic level, the lattice distortion has been widely observed in the form of varying bond lengths. At the electronic level, a range of charge transfers result in the charge density distortion. Collectively, the distorted landscapes cause large quantitative variations of the atomic level properties; in this review, we highlight the effect of lattice distortion on point defect energetics, stacking fault energies, and dislocation mobility. Besides the well- known large HEAs phase space, the enormity of the distorted energy landscape that scales with the atomic configurations is a new consideration; understanding this coupling between composition, lattice distortion and properties’ variations thus becomes an exciting but challenging area within the field of HEAs. Furthermore, this coupling is expected to open a new door for materials design, where the materials properties could be tuned via leveraging the lattice distortion, which is essentially absent in dilute/ordered alloys.

36 MATERIALS SCIENCE↗

Dissociation of misfit and threading dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} epitaxial film

Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film was epitaxially grown on a (001) LaAlO{sub 3} substrate using single-target pulsed laser deposition. The dissociation of misfit and threading dislocations in the epitaxial Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film was investigated using high-resolution transmission electron microscopy (HRTEM). For a misfit dislocation with a Burgers vector of [200], it was shown that it could dissociate into four partial dislocations with Burgers vector of type 1/2 < 110>. For the threading dislocations, it was found that they usually coexist with stacking faults. The formation mechanism for the dissociated dislocations was discussed. All the dislocations can relieve the local strain in the Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} epitaxial film. - Research Highlights: {yields}Dissociation behaviour of misfit dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film. {yields}Dissociation behaviour of threading dislocations in Ba{sub 0.75}Sr{sub 0.25}TiO{sub 3} film. {yields}Formation mechanism of the dissociated dislocations.

36 MATERIALS SCIENCE↗

High Cubic-Phase Purity InN on MgO (001) Using Cubic-Phase GaN as a Buffer Layer

High cubic-phase purity InN films were grown on MgO (001) substrates by molecular beam epitaxy with a cubic-phase GaN buffer layer. The cubic phase purity of the InN grown layers has been analyzed by high resolution X-ray diffraction, {mu}-Raman scattering and transmission electron microscopy. It is evidenced that the hexagonal-phase content in the InN overlayer much depends on hexagonal-phase content in the cubic-phase GaN buffer layer and increases with increasing the hexagonal-phase GaN content. From Raman scattering measurements, in addition, the InN layer with lowest hexagonal component (6%), only Raman characteristics of cubic TO{sub InN} and LO{sub InN} modes were observed, indicating a formation of a small amount of stacking faults, which does not affect on vibrational property.

36 MATERIALS SCIENCE↗

Insights into the Performance Degradation of Oxygen-Type Manganese-Rich Layered Oxide Cathodes for High-Voltage Sodium-Ion Batteries

The cost of batteries is becoming as important as the energy density for large-scale electrochemical energy storage application. Sodium manganese-rich layered oxides (P-type and O-type) are thus one of the promising cathode materials for rechargeable batteries because of the relatively low cost of manganese and sodium. The O-type cathodes are more promising for practical application owing to their high sodium-ion stoichiometry. However, most of these materials suffer from rapid capacity decay during high-voltage cycling. We used synchrotron X-ray probes coupled with electrochemical techniques to disclose the structural evolution of α-NaMnO 2 during solid-state synthesis and electrochemical cycling. During high-voltage cycling, a substantial increase of interfacial microstrain from both stacking faults and Mn cation migration was found to pin down this material’s layered structures and simultaneously block the diffusion pathways of Na + , thus leading to the performance degradation. The findings presented in this work can guide future development of high-performance sodium-ion cathode materials.

25 ENERGY STORAGE↗

A mixture of massive and feathery microstructures of Ti48Al2Cr2Nb alloy by high undercooled solidification

A mixture of massive and feathery microstructures was observed in Ti48Al2Cr2Nb alloy subjected to the undercooled solidification rather than the heat treatments in most cases. Double recalescence events and primary β solidification confirmed that massive γ phase did not directly nucleate from the undercooled melt but formed during the solid-state transformations. It is believed that small white areas (aluminium-poor) along lamellar grain boundaries may be closely related to the formation of massive γ phase and feathery γ phase. High dislocation density and stacking faults were detected in massive γ phase by transmission electron microscopy. The high energy of defects and undercooling in the solid state phase transformation can provide sufficiently high driving force for the nucleation of massive γ phase. - Graphical abstract: Display Omitted - Highlights: • A mixture of massive and feathery microstructures was observed. • Massive γ formed during the solid-state transformations. • Defects and undercooling provide driving force for the nucleation of massive γ.

36 MATERIALS SCIENCE↗

Metamorphic quantum dots: Quite different nanostructures

In this work, we present a study of InAs quantum dots deposited on InGaAs metamorphic buffers by molecular beam epitaxy. By comparing morphological, structural, and optical properties of such nanostructures with those of InAs/GaAs quantum dot ones, we were able to evidence characteristics that are typical of metamorphic InAs/InGaAs structures. The more relevant are: the cross-hatched InGaAs surface overgrown by dots, the change in critical coverages for island nucleation and ripening, the nucleation of new defects in the capping layers, and the redshift in the emission energy. The discussion on experimental results allowed us to conclude that metamorphic InAs/InGaAs quantum dots are rather different nanostructures, where attention must be put to some issues not present in InAs/GaAs structures, namely, buffer-related defects, surface morphology, different dislocation mobility, and stacking fault energies. On the other hand, we show that metamorphic quantum dot nanostructures can provide new possibilities of tailoring various properties, such as dot positioning and emission energy, that could be very useful for innovative dot-based devices.

36 MATERIALS SCIENCE↗

Synthesis and characterization of O3-Na{sub 3}LiFeSbO{sub 6}: A new honeycomb ordered layered oxide

Highlights: • A new honeycomb ordered layered oxide Na{sub 3}LiFeSbO{sub 6} was synthesized. • This compound crystallizes in the C2/c space group. • Disorder in the honeycomb arrangement of Li and Fe is present. - Abstract: A new compound Na{sub 3}LiFeSbO{sub 6} has been synthesized by conventional solid state methods and investigated using X-ray diffraction, DC magnetic susceptibility, {sup 57}Fe Mössbauer spectroscopy and optical measurements. This compound crystallizes in a monoclinic unit cell and is related to a family of honeycomb ordered layered oxide materials where Na{sup +} fills octahedral interlayer sites between Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs of edge sharing octahedra. Each SbO{sub 6} octahedron is surrounded by LiO{sub 6} and FeO{sub 6} octahedra creating a honeycomb arrangement within the slabs. Powder X-ray diffraction indicates the presence of stacking faults. This compound exhibits Curie–Weiss behavior at high temperatures and the effective magnetic moment verifies the presence of high spin Fe{sup 3+}. The {sup 57}Fe Mössbauer spectroscopy confirms Fe{sup 3+} in an octahedral position and indicates disorder in the arrangement of LiO{sub 6} and FeO{sub 6} octahedra in the Li{sub 1/3}Fe{sub 1/3}Sb{sub 1/3}O{sub 2} slabs.

36 MATERIALS SCIENCE↗

Tracking defect type and strain relaxation in patterned Ge/Si(001) islands by x-ray forbidden reflection analysis

Plastic relaxation and formation of defects are crucial issues in the epitaxial growth of nanoparticles and thin films. Indeed, defects generate local stress in the crystalline lattice, which affects their surroundings and may lead to undesired effects such as reduced charge-carrier lifetime or nonradiative recombinations. Here, we use a nondestructive method based on x-ray diffuse scattering close to forbidden reflections to identify the defect types with a high sensitivity and quantify their average size and strain field. Combined with transmission electron microscopy, it offers opportunities to track both ensemble average and single defects inside three-dimensional structures. These techniques have been applied to partially embedded and high-Ge-content (x{sub Ge}=0.87{+-}0.06) dots selectively grown in 20-nm-sized pits on Si(001) surfaces through openings in a SiO{sub 2} template. The stress in the 20-nm-wide Ge islands is relaxed not only by interfacial dislocations but also by microtwins and/or stacking faults located at the interface, proving the importance of {l_brace}111{r_brace} planes and twinning in the relaxation process of nanometer-size Ge dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective area growth and characterization of GaN nanocolumns, with and without an InGaN insertion, on semi-polar (11–22) GaN templates

The aim of this work is the selective area growth (SAG) of GaN nanocolumns, with and without an InGaN insertion, by molecular beam epitaxyon semi-polar (11–22) GaN templates. The high density of stacking faults present in the template is strongly reduced after SAG. A dominant sharp photoluminescence emission at 3.473 eV points to high quality strain-free material. When embedding an InGaN insertion into the ordered GaN nanostructures, very homogeneous optical properties are observed, with two emissions originating from different regions of each nanostructure, most likely related to different In contents on different crystallographic planes.

36 MATERIALS SCIENCE↗

Structure of the Fe-Mn-Si alloys submitted to γ ↔ ε thermocycling

Highlights: • The effect of thermal cycling Fe–Mn–Si alloys is studied. • In situ neutron diffraction, internal friction, DSC and TEM results are analysed. • Lattice defects accumulation both in martensitic and austenitic phases. • Microstrains in the γ and ε phases are estimated. - Abstract: The accumulation of defects and internal stresses and related changes of the direct and reverse martensitic transition (MT) on thermocycling over the phase transition in different Fe–Mn–Si alloys are investigated by in situ neutron diffraction, TEM, SEM-EBSD, DSC and mechanical spectroscopy. The temperature of direct MT in Fe-22Mn-3Si, Fe-26Mn-4Si and Fe-26Mn-7Si alloys decreases during thermal cycling, while that of the inverse MT increases, which causes a widening of the transformation hysteresis. Transmission electron microscopy shows that a large number of dislocations and stacking faults are formed in both martensitic and austenitic phases in the Fe-22Mn-3Si annealed alloy submitted to γ ↔ ε thermocycling. From in situ neutron diffraction tests on Fe-22Mn-3Si annealed alloy and classical Williamson-Hall analysis, we found that the microstrains in the ε-martensite after 1 and 12 thermocycles are roughly twice higher as compared with the austenite phase.

36 MATERIALS SCIENCE↗

Core structures analyses of (a+c)-edge dislocations in wurtzite GaN through atomistic simulations and Peierls–Nabarro model

The core structures and slip characteristics of (a+c)-edge dislocations on pyramidal planes in wurtzite GaN were investigated employing molecular dynamics simulations. Multiple stable core configurations are identified for dislocations along the glide and shuffle planes. The corresponding generalized-stacking-fault energy (GSFE) curves for the glide and shuffle slips are calculated. The GSFE curves, combined with the Peierls–Nabarro model, demonstrate that the shuffle slip is favored over the glide slip given the markedly lower Peierls energy and stress of the shuffle slip. Our findings also indicate that in general slip motions for (a+c)-edge dislocations are only possible at elevated temperature, and the necessity of further studies of thermally activated processes to better understand the dynamics of (a+c) dislocations in GaN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control and elimination of nucleation-related defects in GaP/Si(001) heteroepitaxy

GaP films were grown on offcut Si(001) substrates using migration enhanced epitaxy nucleation followed by molecular beam epitaxy, with the intent of controlling and eliminating the formation of heterovalent (III-V/IV) nucleation-related defects--antiphase domains, stacking faults, and microtwins. Analysis of these films via reflection high-energy electron diffraction, atomic force microscopy, and both cross-sectional and plan-view transmission electron microscopies indicate high-quality GaP layers on Si that portend a virtual GaP substrate technology, in which the aforementioned extended defects are simultaneously eliminated. The only prevalent remaining defects are the expected misfit dislocations due to the GaP-Si lattice mismatch.

36 MATERIALS SCIENCE↗

Structural anisotropy of nonpolar and semipolar InN epitaxial layers

We present a detailed study of the structural characteristics of molecular beam epitaxy grown nonpolar InN films with a- and m-plane surface orientations on r-plane sapphire and (100) {gamma}-LiAlO{sub 2}, respectively, and semipolar (1011) InN grown on r-plane sapphire. The on-axis rocking curve (RC) widths were found to exhibit anisotropic dependence on the azimuth angle with minima at InN [0001] for the a-plane films, and maxima at InN [0001] for the m-plane and semipolar films. The different contributions to the RC broadening are analyzed and discussed. The finite size of the crystallites and extended defects are suggested to be the dominant factors determining the RC anisotropy in a-plane InN, while surface roughness and curvature could not play a major role. Furthermore, strategy to reduce the anisotropy and magnitude of the tilt and minimize defect densities in a-plane InN films is suggested. In contrast to the nonpolar films, the semipolar InN was found to contain two domains nucleating on zinc-blende InN(111)A and InN(111)B faces. These two wurtzite domains develop with different growth rates, which was suggested to be a consequence of their different polarity. Both, a- and m-plane InN films have basal stacking fault densities similar or even lower compared to nonpolar InN grown on free-standing GaN substrates, indicating good prospects of heteroepitaxy on foreign substrates for the growth of InN-based devices.

36 MATERIALS SCIENCE↗

Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and CoCrFeMnNi High-Entropy Alloys

High-entropy alloys (HEAs), a novel class of metal alloys, have been receiving increasing attention from the scientific community. HEAs have the potential to be used in critical load-bearing applications in replacement of conventional alloys such as stainless steel and nickel-base superalloys. Tensile experiments at quasi-static to dynamic strain rates (10{sup −4}-10{sup 3} s{sup −1}) were performed on two single-phase face-centered cubic HEAs, CoCrFeNi and CoCrFeMnNi. Electron backscatter diffraction was used to study the microstructure of the samples before the experiments, and transmission electron microscopy was performed postmortem. The dominant deformation mechanisms were dislocation slip at quasi-static strain rates with the addition of deformation nano-twins at dynamic strain rates. Ultimate dynamic tensile strength and ductility improved with the increase in strain rate, which can be attributed to the activation of deformation nano-twins in HEAs. CoCrFeNi and CoCrFeMnNi both have low stacking fault energies, which could promote twinning at high strain rates to accommodate plastic deformation. The strain rate sensitivity of the flow stress increased with increasing strain rate, beginning with negligible strain rate sensitivity in the quasi-static range to high strain rate sensitivity in the dynamic range. CoCrFeMnNi showed greater strain rate sensitivity of flow stress. CoCrFeNi, with less configurational entropy, had higher mechanical properties and strain-hardening rates compared to CoCrFeMnNi, which was attributed to the weakening effect of the addition of Mn on the solid solution hardening.

36 MATERIALS SCIENCE↗

Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides

The metallic binder phase dictates the toughening behavior of WC-Co cemented carbides (hardmetals), even though it occupies a relative small fraction of the composite. Studies on deformation and phase transformation of the binder constituent are scarce. Grinding represents a key manufacturing step in machining of hardmetal tools, and is well-recognized to induce surface integrity alterations. In this work, metallurgical alterations of the binder phase in ground WC-Co cemented carbides have been assessed by a combination of electron back scattered diffraction and transmission electron microscopy techniques. The Co-base binder experiences a martensitic phase transformation from fcc to hcp crystal structure, predominantly in the first 5 μm below the surface. The hcp fraction decreases gradually along a depth of 10 μm. Surface Co displays severe plastic deformation under the highest strain, resulting in formation of nanocrystalline grains in the first micrometer below the surface. Microstructural refinement within the binder phase is observed even at greater depth. Stacking faults were detected in most of the refined grains. The metallurgical alterations of the binder phase modify the local stress distribution during grinding, which affects the discerned subsurface microcracking. The resulting residual stress profile is the sum of multiple subsurface changes, such as phase transformation, severe plastic deformation and grain refinement, where it is discerned that the depth profile of the transformed hcp-Co fraction coincides with the grinding-induced residual stress profile.

36 MATERIALS SCIENCE↗

Phase instability and defect induced evolution of optical properties in Cd rich-CdS nanoparticles

Although semiconductor nanostructures exhibit improved physical properties, their structural instability is be a problem for technological applications. This paper reports a temperature-induced low energy phase transformation that occurs in CdS nanoparticles which is ascribed to thermally generated stacking-faults. The phase transformation is found to change the nature of lattice strain in the samples. The formation of this defect-induced lattice strain and its influence on the physical properties of the samples are investigated. The modified optical absorption and emission properties of the samples are thoroughly studied. Using resonance Raman spectroscopy, the evolution of electron-phonon (e-p) coupling strength with structural changes is studied. An explanation to the contradictory nature of e-p coupling strength observed in the nano-regime is given.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bond-Order Potential for Erbium-Hydride System

Interatomic potentials for an Er-H system are derived based on an analytical bond-order scheme. The model potentials provide a good description of the bulk properties and defect properties of hcp-Er, including lattice parameter, cohesive energy, elastic constants, point defect formation energies, surface and stacking fault energies. In addition to experimental data, a DFT method is used to construct the necessary database of different phases. We demonstrate that such potentials can reproduce the hydrogen behaviour in an alpha-phase Er-H system for a low hydrogen/metal ratio. Especially, the present potentials can be employed for modelling the energetics and structural properties of fcc ErH2, including lattice parameters, elastic constants, bulk modulus, Young's modulus and shear modulus, as well as the formation energies and migration barriers of point defects in ErH2.

08 HYDROGEN↗