Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

One-step sputtering of MoSSe metastable phase as thin film and predicted thermodynamic stability by computational methods

Abstract We present the fabrication of a MoS 2−x Se x thin film from a co-sputtering process using MoS 2 and MoSe 2 commercial targets with 99.9% purity. The sputtering of the MoS 2 and MoSe 2 was carried out using a straight and low-cost magnetron radio frequency sputtering recipe to achieve a MoS 2−x Se x phase with x = 1 and sharp interface formation as confirmed by Raman spectroscopy, time-of-flight secondary ion mass spectroscopy, and cross-sectional scanning electron microscopy. The sulfur and selenium atoms prefer to distribute randomly at the octahedral geometry of molybdenum inside the MoS 2−x Se x thin film, indicated by a blue shift in the A 1g and E 1 g vibrational modes at 355 cm −1 and 255 cm −1 , respectively. This work is complemented by computing the thermodynamic stability of a MoS 2−x Se x phase whereby density functional theory up to a maximum selenium concentration of 33.33 at.% in both a Janus-like and random distribution. Although the Janus-like and the random structures are in the same metastable state, the Janus-like structure is hindered by an energy barrier below selenium concentrations of 8 at.%. This research highlights the potential of transition metal dichalcogenides in mixed phases and the need for further exploration employing low-energy, large-scale methods to improve the materials’ fabrication and target latent applications of such structures.

36 MATERIALS SCIENCE↗

Plasma diagnostics of low pressure high power impulse magnetron sputtering assisted by electron cyclotron wave resonance plasma

This paper reports on an investigation of the hybrid pulsed sputtering source based on the combination of electron cyclotron wave resonance (ECWR) inductively coupled plasma and high power impulse magnetron sputtering (HiPIMS) of a Ti target. The plasma source, operated in an Ar atmosphere at a very low pressure of 0.03 Pa, provides plasma where the major fraction of sputtered particles is ionized. It was found that ECWR assistance increases the electron temperature during the HiPIMS pulse. The discharge current and electron density can achieve their stable maximum 10 {mu}s after the onset of the HiPIMS pulse. Further, a high concentration of double charged Ti{sup ++} with energies of up to 160 eV was detected. All of these facts were verified experimentally by time-resolved emission spectroscopy, retarding field analyzer measurement, Langmuir probe, and energy-resolved mass spectrometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Progress in Developing Novel Double-Shell Metal Targets Via Magnetron Sputtering

Double shell inertial confinement fusion targets represent a unique platform for achieving ignition. They consist of a low-Z outer ablator, a high-Z inner pusher layer, and low density foam layer sandwiched in-between. There is the possibility that double shell targets may achieve ignition at lower ion temperatures due to the containment of radiation and conduction losses as well as requiring smaller convergence ratios. We have explored using magnetron sputtering to make the inner high-Z pusher layers and have demonstrated a W-Cr bilayer inner shell design. An Al-Be mixture was explored as one of the outer ablator materials. This material takes advantage of Al x-ray M-band absorption to reduce pre-heating and still retain Be high ablation speeds. Typical commercial Al-Be materials suffer from phase separation. However, by using magnetron sputtering we have been able to demonstrate homogeneous Al-Be ablator coatings. The sputtered material forms with nano-sized grains and has demonstrated excellent machinability. As a second type of shell explored, pushered single shells can exploit large density gradients to stabilize Rayleigh-Taylor instabilities during compression. Sharp gradients will have higher ignition yields and larger grading lengths will be more stable. We were able to demonstrate pushered single shells made from W-Be gradient layers with various grading slopes and provide simulated results showing that the grading profiles can be influenced by the coating rates of two components.

36 MATERIALS SCIENCE↗

Impact of Stoichiometry on Structural and Optical Properties of Sputter Deposited Multicomponent Tellurite Glass Films

Multicomponent TeO 2 –Bi 2 O 3 –ZnO ( TBZ ) glass thin films were prepared using RF magnetron sputtering under different oxygen flow rates. The influences of oxygen flow rate on the structural and optical properties of the resulting thin films were investigated. We observed that thin films sputtered in an oxygen‐rich environment are optically transparent while those sputtered in an oxygen‐deficient environment exhibit broadband absorption. The structural origin of the optical property variation was studied using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman Spectroscopy, and transmission electron microscopy which revealed that the presence of under‐coordinated Te leads to the observed optical absorption in oxygen‐deficient films.

Ogbuu, Okechukwu↗

Phase evolution and morphology in Cu-In-Ga sputtered precursors

The reaction of metallic precursors has become the primary method of industrial manufacturing for Cu(In,Ga)Se2. Commonly used Cu3Ga sputter targets have thus far dictated that the relative Ga composition of these precursors is Ga/(In+Ga) ≈ 0.25. Cu-In-Ga precursors are prepared with varying DC sputtering conditions and Ga compositions ranging from 0 ≤ Ga/(In+Ga) ≤ 0.75. The phase evolution and morphology of these precursors is characterized using x-ray diffraction (XRD) and scanning electron microscopy, including in situ annealing of precursors during XRD measurements. It is observed that the Ga composition of as-deposited precursors affects phase evolution with annealing. Consistent morphology changes were not observed with changing Ga, however, film morphology was controlled by adjusting In sputter conditions.

Lam, Isaac K. (ORCID:0000000198002765)↗

Radio-frequency magnetron sputter deposition of ultrathick boron carbide films

The deposition of thick B 4 C films with low residual stress by conventional direct-current magnetron sputtering is accompanied by the formation of dust particulates contaminating the target, chamber, and substrates and leading to the formation of nodular defects in films. Here, we demonstrate that the formation of particulates is greatly reduced during radio-frequency magnetron sputtering (RFMS). We systematically study properties of B 4 C films deposited by RFMS with a substrate temperature of 330 °C, a target-to-substrate distance of 10 cm, Ar working gas pressure in the range of 4.5–12.0 mTorr (0.6–1.6 Pa), and substrate tilt angles of 0°–80°. All films are x-ray amorphous. A columnar structure develops with increasing either Ar pressure or substrate tilt. For columnar films, the column tilt angle decreases with increasing Ar pressure, which we attribute to a corresponding increase in the width of the distribution of impact angles of deposition flux. In contrast to the Keller–Simmons rule, the deposition rate increases with increasing Ar pressure, which suggests a better coupling of the RF energy to the plasma processes that lead to target sputtering at higher pressures. There is a critical substrate tilt angle above which the total residual stress is close to zero. This critical substrate tilt angle is ~0° for an Ar pressure of 12 mTorr (1.6 Pa). The lower residual stress state, necessary for depositing ultrathick films, is characterized by a larger concentration of nanoscale inhomogeneities and decreased mechanical properties. Based on these results, RFMS deposition of 60-μm-thick B 4 C films is demonstrated.

36 MATERIALS SCIENCE↗

Nb3Sn Multilayer Sequential Sputtering at Jefferson Lab

Nb3Sn-coated Nb SRF cavities are studied due to their potential of providing a higher accelerating gradient over Nb SRF cavities. Magnetron sputtering can be a feasible alternative to conventional tin vapor diffusion process to fabricate Nb3Sn for SRF cavities. By depositing Nb and Sn layers separately and annealing afterwards, the stoichiometry of the coated films can be controlled to create Nb3Sn. To understand the formation of Nb3Sn at higher annealing temperatures, a comparative study of deposition and processing conditions is required. We have sputtered Nb and Sn multilayers and post-deposition annealed at 850, 950, 1000, 1100 and 1200 °C for 3 hours. The structural properties of the annealed films were characterized by X-ray diffraction (XRD) and compared to as-coated films. The film microstructures and compositions were examined by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The superconducting transition of the films were measured by surface resistivity data obtained down to cryogenic temperatures. A new cavity deposition system with a cylindrical magnetron has been designed to implement the sequential sputtering technique onto a single-cell cavity.

Eremeev, Grigory↗

Method and apparatus for sputtering utilizing an apertured electrode and a pulsed substrate bias

The method and equipment used for sputtering by use of an apertured electrode and a pulsed substrate bias are discussed. The technique combines the advantages of ion plating with the versatility of a radio frequency sputtered source. Electroplating is accomplished by passing a pulsed high voltage direct current to the article being plated during radio frequency sputtering.

Przybyszewski, J. S.↗

Fabrication of thick structures by sputtering

Deposit, 5500-gram of Cu-0.15 wt % Zr alloy, sputtered onto copper cylinder to average thickness of 12.29 mm. Structure was achieved with high-rate sputter deposition for about 100 hours total sputtering time. Material had twice the strength of unsputtered material at temperatures to 723 K and equivalent strength at nearly 873 K.

Kazaroff, J. M.↗

Development of sputtered techniques for thrust chambers, task 1

Filler materials proposed for use in the sputter fabrication regeneratively cooled thrust chambers were evaluated. Low melting castable alloys, CERROBEND. CERROCAST, and CERROTRU, slurry applied SERMETEL 481 and flame-sprayed aluminum were investigated as filler materials. Sputter deposition from a cylindrical cathode inverted magnestron was used to apply an OFHC copper closeout layer to filled OFHC copper ribbed-wall cylindrical substrates. The sputtered closeout layer structure was evaluated with respect to filler material contamination, predeposition machining and finishing operations, and deposition parameters. The application of aluminum by flame-spraying resulted in excessiver filler porosity. Though the outgassing from this porosity was found to be detrimental to the closeout layer structure, bond strengths in excess of 10,500 psi were achieved. Removal of the aluminum from the grooves was readily accomplished by leaching in a 7.0 molar solution of sodium hydroxide at 353 K. Of the other filler materials evaluated, CERROTRU was found to be the most suitable material with respect to completely filling the ribbed-wall cylinders and vacuum system compatibility. However, bond contamination resulted in low closeout layer bond strength with the CERROTRU filler. CERROBEND, CERROCAST, and SERMETEL 481 were found to be unacceptable as filler materials.

Mullaly, J. R.↗

Multitarget sequential sputtering apparatus

The development and characteristics of a sputtering apparatus are discussed. A potential difference is applied between the cathode and anode to produce a plasma for each target which is sputtered by accelerated ions within the plasma. The process of sputtering for various materials is described. Diagrams of the unit are provided.

Shima, R.↗

Development of sputtered techniques for thrust chambers

Techniques and materials were developed and evaluated for the fabrication and coating of advanced, long life, regeneratively cooled thrust chambers. Materials were analyzed as fillers for sputter application of OFHC copper as a closeout layer to channeled inner structures; of the materials evaluated, aluminum was found to provide the highest bond strength and to be the most desirable for chamber fabrication. The structures and properties were investigated of thick sputtered OFHC copper, 0.15 Zr-Cu, Al2O3,-Cu, and SiC-Cu. Layered structures of OFHC copper and 0.15 Zr-Cu were investigated as means of improving chamber inner wall fatigue life. The evaluation of sputtered Ti-5Al-2.5Sn, NASA IIb-11, aluminum and Al2O3-Al alloys as high strength chamber outer jackets was performed. Techniques for refurbishing degraded thrust chambers with OFHC copper and coating thrust chambers with protective ZrO2 and graded ZrO2-copper thermal barrier coatings were developed.

Mullaly, J. R.↗

An investigation of RF sputter etched silicon surfaces using helium ion backscatter

The effect of RF sputter etching on the (111) surface of silicon was studied by observing backscatter spectra from a 2 MeV, He-4(+) beam oriented along the silicon 111 orientation channel. Silicon samples were RF sputter etched in an argon discharge at electrode bias potentials ranging from 0.5 to 2.5 kV. The samples were sputter etched for a time sufficient for the lattice damage to reach saturation. Analysis of these samples revealed that the thickness of this damage layer and the concentration of trapped argon increased with electrode bias potential. An annealing study of these damaged surfaces was carried out to 900 C.

Sachse, G. W.↗

Reactively sputtered thin film photovoltaic devices

The feasibility of a reactively sputtered thin film CdS - Cu2S solar cell is proven. Identification of the reactively sputtered Cu2S film is made by X-ray diffractometer and spectro-transmission measurements. Because of its simplicity, economical use of material, and high yield, the reactive sputtering process promises to be a low cost method for producing CdS - Cu2S solar cells.

Hsieh, E. J.↗

The new applications of sputtering and ion plating

The potential industrial applications of sputtering and ion plating are strictly governed by the unique features these methods possess. The outstanding features of each method, the resultant coating characteristics and the various sputtering modes and configurations are discussed. New, more complex coatings and deposits can be developed such as graded composition structures (metal-ceramic seals), laminated and dispersion strengthened composites which improve the mechanical properties and high temperature stability. Specific industrial areas where future effort of sputtering and ion plating will concentrate to develop intricate alloy or compound coatings and solve difficult problem areas are discussed.

Spalvins, T.↗

X-ray photoelectron spectroscopy study of radiofrequency sputtered chromium bromide, molybdenum disilicide, and molybdenum disulfide coatings and their friction properties

Radiofrequency sputtered coatings of CRB2, MOSI2, and MOS2 were examined by X-ray photoelectron spectroscopy. The effects of sputtering target history, deposition time, RF power level, and substrate bias on film composition were studied. Friction tests were run on RF sputtered surfaces of 440-C steel to correlate XPS data with lubricating properties. Significant deviations from stoichiometry and high oxide levels for all three compounds were related to target outgassing. The effect of biasing on these two factors depended on the compound. Improved stoichiometry correlated well with good friction and wear properties.

Wheeler, D. R.↗

Sputtering in interstellar shocks - A model for heavy element depletion

High-velocity (at least 100 km/s) shock fronts are found to provide an environment where grains can be destroyed by thermal sputtering. Application is made to supernova remnants. Sputtering of refractory grains in shocks associated with high-velocity clouds leads to cosmic abundances of heavy elements and if followed by deceleration of the high-velocity gas and dilution with ambient depleted matter. A correlation of depletion with systematic velocity is predicted. It is proposed that there is a residual underlying depletion associated with refractory grain formation and a subsequent trapping of gas-phase metallic species by adsorption. Sputtering of adsorbed monolayers in intermediate-velocity shocks (not exceeding 50 km/s) can account for a range of depletions in diffuse interstellar matter.

Barlow, M. J.↗

Closed-cell foams produced from sputter-deposited aluminum

Sputter deposited aluminum containing argon was melted to produce foam, both in the earth's gravitational field and in a zero-gravity space environment. Experiments leading to trapping of up to 270 ppm argon sputtering gas in pure aluminum during high-rate dc triode sputter deposition are discussed. Conduct of the melting experiments and design of the furnace used are described. Metallography; an analysis of bubble size, distribution, and morphology; and a preliminary description of the kinetics are also presented.

Patten, J. W.↗