Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACECRAFT MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Additional extensions to the NASCAP computer code, volume 2

Particular attention is given to comparison of the actural response of the SCATHA (Spacecraft Charging AT High Altitudes) P78-2 satellite with theoretical (NASCAP) predictions. Extensive comparisons for a variety of environmental conditions confirm the validity of the NASCAP model. A summary of the capabilities and range of validity of NASCAP is presented, with extensive reference to previously published applications. It is shown that NASCAP is capable of providing quantitatively accurate results when the object and environment are adequately represented and fall within the range of conditions for which NASCAP was intended. Three dimensional electric field affects play an important role in determining the potential of dielectric surfaces and electrically isolated conducting surfaces, particularly in the presence of artificially imposed high voltages. A theory for such phenomena is presented and applied to the active control experiments carried out in SCATHA, as well as other space and laboratory experiments. Finally, some preliminary work toward modeling large spacecraft in polar Earth orbit is presented. An initial physical model is presented including charge emission. A simple code based upon the model is described along with code test results.

Stannard, P. R.↗

(abstract) SEQ_POINTER: Next Generation, Planetary Spacecraft Remote Sensing Science Observation Design Tool

Implementation of a multimission tool, SEQ_POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions when being adopted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ_POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required.

remote↗

Simulation of spacecraft attitude dynamics using TREETOPS and model-specific computer Codes

The simulation of spacecraft attitude dynamics and control using the generic, multi-body code called TREETOPS and other codes written especially to simulate particular systems is discussed. Differences in the methods used to derive equations of motion--Kane's method for TREETOPS and the Lagrangian and Newton-Euler methods, respectively, for the other two codes--are considered. Simulation results from the TREETOPS code are compared with those from the other two codes for two example systems. One system is a chain of rigid bodies; the other consists of two rigid bodies attached to a flexible base body. Since the computer codes were developed independently, consistent results serve as a verification of the correctness of all the programs. Differences in the results are discussed. Results for the two-rigid-body, one-flexible-body system are useful also as information on multi-body, flexible, pointing payload dynamics.

Cochran, John E.↗

Collision detection for spacecraft proximity operations

Collision Detection for Spacecraft Proximity Operations This thesis describes the development of a new collision detection algorithm to be used when two spacecraft are operating in the same vicinity. The two spacecraft are modelled as unions of convex polyhedra, where the polyhedron resulting from the union may be either convex or nonconvex. The relative motion of the two spacecraft is assumed to be such that one vehicle is moving with constant linear and angular velocity with respect to the other. The algorithm determines if a collision is possible and, if so, predicts the time when the collision will take place. The theoretical basis for the new collision detection algorithm is the C-function formulation of the configuration space approach recently introduced by researchers in robotics. Three different types of C-functions are defined that model the contacts between the vertices, edges, and faces of the polyhedra representing the two spacecraft. These C-functions are used to formulate three "collision" conditions. The first of these conditions limits the points representing potential collisions to the zeros of the C-functions. The new algorithm is fundamentally a search for the smallest zero of any C-function that satisfies the second and third collision conditions. The C-functions are shown to be transcendental functions of time for the assumed trajectory of the moving spacecraft. The zeros of these functions cannot be expressed in dosed form. Therefore, numerical search procedures are developed to find aLl of the zeros of a C-function in specified bounded intervals of time. These bounded intervals of time are found by examining the second and third collision conditions. The capabilities of the new algorithm are demonstrated for several example cases. These include examples of collisions determined by zeros of each of the three different types of C-functions. In addition to predicting the time of first contact of the polyhedra, the algorithm identifies the features of the two polyhedra that are touching at this time. The new collision detection algorithm is the first such algorithm that is capable of solving the collision detection problem exactly for the case where the moving object has constant linear and angular velocities. This is a significant improvement on previous collision detection algorithms described in the literature. In particular, the ability to handle constant angular velocity represents a more realistic type of rotational motion than those which have been used in other algorithms.

Robin M Vaughan↗

Proceedings of the Spacecraft Charging Technology Conference: Executive Summary

Aerospace environments are reviewed in reference to spacecraft charging. Modelling, a theoretical scheme which can be used to describe the structure of the sheath around the spacecraft and to calculate the charging currents within, is discussed. Materials characterization is considered for experimental determination of the behavior of typical spacecraft materials when exposed to simulated geomagnetic substorm conditions. Materials development is also examined for controlling and minimizing spacecraft charging or at least for distributing the charge in an equipotential manner, using electrical conductive surfaces for materials exposed to space environment.

Pike, C. P.↗

Magnetic fields and charged particles around major planets and their satellites

It is noted that whereas Jupiter and Saturn have magnetospheres whose large-scale structure can be understood by analogy with earth, the ways in which the magnetospheres differ are of great interest. At earth, large-scale processes are dominated by convective flows of plasma driven by the solar wind. At Jupiter, centrifugal effects that are driven by planetary rotation are critical. Magnetic particle sources include not only the ionosphere and solar wind (as at earth) but also satellites and rings. The internal planetary magnetic moments controlling the scale of the magnetosphere differ by orders of magnitude between Jupiter and earth. It is pointed out that where the magnetic moments have been modeled from spacecraft data, the restricted spatial sampling has biased the results and limited confidence in details of the models. Voyager data suggest that Io may itself be magnetized and surrounded by an entirely unfamiliar type of magnetosphere.

Kivelson, M. G.↗

SEQ-POINTER: Next generation, planetary spacecraft remote sensing science observation design tool

Since Mariner, NASA-JPL planetary missions have been supported by ground software to plan and design remote sensing science observations. The software used by the science and sequence designers to plan and design observations has evolved with mission and technological advances. The original program, PEGASIS (Mariners 4, 6, and 7), was re-engineered as POGASIS (Mariner 9, Viking, and Mariner 10), and again later as POINTER (Voyager and Galileo). Each of these programs were developed under technological, political, and fiscal constraints which limited their adaptability to other missions and spacecraft designs. Implementation of a multi-mission tool, SEQ POINTER, under the auspices of the JPL Multimission Operations Systems Office (MOSO) is in progress. This version has been designed to address the limitations experienced on previous versions as they were being adapted to a new mission and spacecraft. The tool has been modularly designed with subroutine interface structures to support interchangeable celestial body and spacecraft definition models. The computational and graphics modules have also been designed to interface with data collected from previous spacecraft, or on-going observations, which describe the surface of each target body. These enhancements make SEQ POINTER a candidate for low-cost mission usage, when a remote sensing science observation design capability is required. The current and planned capabilities of the tool will be discussed. The presentation will also include a 5-10 minute video presentation demonstrating the capabilities of a proto-Cassini Project version that was adapted to test the tool. The work described in this abstract was performed by the Jet Propulsion Laboratory, California Institute of Technology, under contract to the National Aeronautics and Space Administration.

Boyer, Jeffrey S.↗

Attitude Sensor Pseudonoise

Even assuming perfect attitude sensors and gyros, sensor measurements on a vibrating spacecraft have apparent errors. These apparent sensor errors, referred to as pseudonoise, arise because gyro and sensor measurements are performed at discrete times. This paper explains the concept of pseudonoise, quantifies its behavior, and discusses the effect of vibrations that are nearly commensurate with measurement periods. Although pseudonoise does not usually affect attitude determination it does affect sensor performance evaluation. Attitude rates are usually computed from differences between pairs of accumulated angle measurements at different times and are considered constant in the periods between measurements. Propagation using these rates does not reproduce exact instantaneous spacecraft attitudes except at the gyro measurement times. Exact sensor measurements will therefore be inconsistent with estimates based on the propagated attitude. This inconsistency produces pseudonoise. The characteristics of pseudonoise were determined using a simple, one-dimensional model of spacecraft vibration. The statistical properties of the deviations of measurements from model truth were determined using this model and a range of different periods of sensor and rate measurements. This analysis indicates that the magnitude of pseudonoise depends on the ratio of the spacecraft vibration period to the time between gyro measurements and can be as much as twice the amplitude of the vibration. In cases where the vibration period and gyro or sensor measurement period are nearly commensurate, unexpected changes in pseudonoise occur.

Hashmall, Joseph A.↗

High speed simulator: A simulator for all seasons

The evolution of a high speed spacecraft simulator (HSS) is discussed from development and operations perspectives. The HSS is a series of simulators capable of modeling the spacecraft and its subsystems at different levels. The HSS was developed for the validation of the Galileo low gain antenna mission's flight software. Due to the successful performance of the HSS in assisting with the flight software validation, additional Galileo validation applications were identified. These applications include the modeling of other onboard data systems, such as the command and data subsystem and the attitude and articulation control subsystem. The HSS architecture, which consists of a number of components, is described and the operational use of the system is outlined.

Patel, K.↗

Effects of antenna blockage on radio frequency performance of the microwave radiometer spacecraft

Radio frequency scaled models of the microwave radiometer spacecraft suspended feed concept were tested to determine the effects of aperture blockage on the antenna radiation pattern. Contributors to the uncertainty of the test measurements were evaluated, and an estimate of the blockage effects was made for comparison with the test measurements. The gain loss budget associated with reflector performance characteristics (aperture blockage, surface reflectivity, reflector roughness, and defocus) was determined.

Sikes, L. D.↗

New Insights into the First Two PSP Solar Encounters Enabled by Modeling Analysis with ADAPT-WSA

Parker Solar Probe's (PSP's) unique orbital path allows us to observe the solar wind closer to the Sun than ever before. Essential to advancing our knowledge of solar wind and energetic particle formation is identifying the sources of PSP observations. We report on results for the first two PSP solar encounters derived using the Wang–Sheeley–Arge (WSA) model driven by Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model maps. We derive the coronal magnetic field and the 1 R⊙ source regions of the PSP-observed solar wind. We validate our results with the solar wind speed and magnetic polarity observed at PSP. When modeling results are very reliable, we derive time series of model-derived spacecraft separation from the heliospheric current sheet, magnetic expansion factor, coronal hole boundary distance, and photospheric field strength along the field lines estimated to be connected to the spacecraft. We present new results for Encounter 1, which show time evolution of the far-side mid-latitude coronal hole that PSP corotates with. We discuss how this evolution coincides with solar wind speed, density, and temperature observed at the spacecraft. During Encounter 2, a new active region emerges on the solar far side, making it difficult to model. We show that ADAPT-WSA output agrees well with PSP observations once this active region rotates onto the near side, allowing us to reliably estimate the solar wind sources retrospectively for most of the encounter. We close with ways in which coronal modeling enables scientific interpretation of these encounters that would otherwise not have been possible.

Solar wind↗

Polarization model applied to Uranian radio emission

The total power and the degree of circular polarization as measured by the Planetary Radio Astronomy experiments on the Voyager spacecraft are modeled. For a source near the electron cyclotron frequency, the degree of circular polarization is determined by the angle between the wave vector and the field. It is shown that the observed strong circular polarization of Uranian smooth low-frequency (SLF) can be modeled as emission that is beamed along the direction of the magnetic field in a filled cone. The main observational constraints of SLF emission from Uranus are met by conjugate sources at about 21 deg from the magnetic equator.

Sawyer, C. B.↗

Time determination for spacecraft users of the Navstar Global Positioning System /GPS/

Global Positioning System (GPS) navigation is performed by time measurements. A description is presented of a two body model of spacecraft motion. Orbit determination is the process of inferring the position, velocity, and clock offset of the user from measurements made of the user motion in the Newtonian coordinate system. To illustrate the effect of clock errors and the accuracy with which the user spacecraft time and orbit may be determined, a low-earth-orbit spacecraft (Seasat) as tracked by six Phase I GPS space vehicles is considered. The obtained results indicate that in the absence of unmodeled dynamic parameter errors clock biases may be determined to the nanosecond level. There is, however, a high correlation between the clock bias and the uncertainty in the gravitational parameter GM, i.e., the product of the universal gravitational constant and the total mass of the earth. It is, therefore, not possible to determine clock bias to better than 25 nanosecond accuracy in the presence of a gravitational error of one part per million.

Grenchik, T. J.↗

A hybrid multigrid technique for computing steady-state solutions to supersonic flows

Recently, Li and Sanders have introduced a class of finite difference schemes to approximate generally discontinuous solutions to hyperbolic systems of conservation laws. These equations have the form together with relevant boundary conditions. When modelling hypersonic spacecraft reentry, the differential equations above are frequently given by the compressible Euler equations coupled with a nonequilibrium chemistry model. For these applications, steady state solutions are often sought. Many tens (to hundreds) of super computer hours can be devoted to a single three space dimensional simulation. The primary difficulty is the inability to rapidly and reliably capture the steady state. In these notes, we demonstrate that a particular variant from the schemes presented can be combined with a particular multigrid approach to capture steady state solutions to the compressible Euler equations in one space dimension. We show that the rate of convergence to steady state coming from this multigrid implementation is vastly superior to the traditional approach of artificial time relaxation. Moreover, we demonstrate virtual grid independence. That is, the rate of convergence does not depend on the degree of spatial grid refinement.

Sanders, Richard↗

Charged particle distributions in Jupiter's magnetosphere

In situ data from the Pioneer and Voyager spacecraft, supplemented by earth-based observations and theoretical considerations, are used as the basis for the present quantitative, compact model of the 1 eV-several MeV charged particle distribution in the Jovian magnetosphere. The thermal plasma parameters of convection speed, number density, and characteristic energy, are specified as functions of position for electrons and for the ion species H(+), O(+), O(2+), S(+), S(2+), S(3+), and Na(+). Major features of the magnetic field, thermal plasma, and trapped particle distributions, are modeled and results for each plasma region are compared with observed spectra. Comparisons show that the model represents the data to within a factor of 2 + or - 1, except where time variations are significant. Practical applications of the model to spacecraft near Jupiter are given.

Divine, N.↗

Using Model-Based Reasoning for Autonomous Instrument Operation - Lessons Learned From IMAGE/LENA

Model-based reasoning has been applied as an autonomous control strategy on the Low Energy Neutral Atom (LENA) instrument currently flying on board the Imager for Magnetosphere-to-Aurora Global Exploration (IMAGE) spacecraft. Explicit models of instrument subsystem responses have been constructed and are used to dynamically adapt the instrument to the spacecraft's environment. These functions are cast as part of a Virtual Principal Investigator (VPI) that autonomously monitors and controls the instrument. In the VPI's current implementation, LENA's command uplink volume has been decreased significantly from its previous volume; typically, no uplinks are required for operations. This work demonstrates that a model-based approach can be used to enhance science instrument effectiveness. The components of LENA are common in space science instrumentation, and lessons learned by modeling this system may be applied to other instruments. Future work involves the extension of these methods to cover more aspects of LENA operation and the generalization to other space science instrumentation.

Johnson, Michael A.↗