Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHOCK WAVE INTERACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Pressure and temperature fluctuations in an axisymmetric flowfield due to shock-boundary layer interactions at high Reynolds numbers at Mach 6

Pressure and temperature fluctuations have been meausred in the vicinity of shock wave-boundary layer interactions due to conical compression ramps on an axisymmetric body. The basic model is a cylindrical body with a 10-deg conical nose. Four conical ramps of vertex angles, 20, 25, 30, and 35 deg serve as shock wave generators. Surface temperature and pressure surveys have been made in the vicinity of the conical ramp vertex, the separation point, and the reattachment point. The temperature response within the flowfield appears to be steady-state for all compression ramp angles and all Reynolds numbers. The pressure response shows some oscillations in the vicinity of the separation point. The characteristic frequency of these fluctuations appears to be in the range from 200 to 1200 Hz with most of the power near 400 Hz. These data indicate the flowfield to be steady-state for all locations with the exception of localized pressure fluctuations in the vicinity of the separation point.

Flanagan, M. J., Jr.↗
NASA NTRS1993

Investigation of a hypersonic crossing shock wave/turbulent boundary layer interaction

A combined theoretical and experimental study is presented for the interaction between crossing shock waves generated by (10 deg, 10 deg) sharp fins and a flat plate turbulent boundary layer at Mach 8.3. The theoretical model is the full 3D mean compressible Reynolds-averaged Navier-Stokes (RANS) equations incorporating the algebraic turbulent eddy viscosity model of Baldwin and Lomax (1978). A grid refinement study indicated that adequate resolution of the flow field has been achieved. Computed results agree well with experiment for surface pressure and surface flow patterns and for pitot pressure and yaw angle profiles in the flow field. The computations, however, significantly overpredict surface heat transfer. Analysis of the computed flow field results indicates the formation of complex streamline and wave structures within the interaction region.

Narayanswami, N↗
NASA NTRS1995

Nonlinear MHD interactions in some solar coronal structures

The magnetohydrodynamic (MHD) interactions of solar coronal fast shock waves of flare and/or nonflare origin with the boundaries of such structures like the streamer and the coronal hole are considered. These boundaries are treated as MHD tangential discontinuities (TD). Different parameters of the observed corona are used. The general case of oblique interaction is studied. It is shown that a fast shock wave is usually refracted as a fast shock wave inside the coronal streamer. But for a special case of the velocity shear across a TD a slow shock wave may be generated. On the contrary the shock wave is refracted inside the coronal hole, indeed as a slow shock wave. The significance of different effects due to the interaction of fast and slow shock waves with the coronal magnetic field is noticed, especially at the time of coronal mass ejection (CME). Thus slow shock waves may help to 'open' the coronal magnetic field, and fast shock waves - to 'close' it. It is also shown, that an oblique fast MHD coronal shock wave may trigger an instability at the boundary of a streamer considered as a TD. It might have a relation with the observed abrupt process of disappearance of the streamer's boundary in the solar corona.

Grib, S. A.↗
NASA NTRS1974

Interplanetary shock waves associated with solar flares

The interaction of the earth's magnetic field with the solar wind is discussed with emphasis on the influence of solar flares. The geomagnetic storms are considerered to be the result of the arrival of shock wave generated by solar flares in interplanetary space. Basic processes in the solar atmosphere and interplanetary space, and hydromagnetic disturbances associated with the solar flares are discussed along with observational and theoretical problems of interplanetary shock waves. The origin of interplanetary shock waves is also discussed.

Chao, J. K.↗
NASA NTRS2018

Computational and Experimental Study of Plume and Shock Interaction Effects on Sonic Boom in the NASA Ames 9x7 Supersonic Wind Tunnel

A wind tunnel test was performed in the NASA Ames 9x7 Supersonic Wind Tunnel focusing on the shock waves traveling through and interacting with an exhaust nozzle plume. This experimental study was conducted to develop and validate the CFD capability required to accurately include nozzle flow with impinging shock effects on near field and ground‐propagated sonic boom signatures. The model was made to be generic, and included a simple nozzle shape, two different aft decks, and a few generic horizontal tails. High pressure air was pumped through a nozzle at various nozzle pressure ratios (NPR) to represent the engine plume in flight. The three different aft body representations each created a different shock wave signature that passed through the plume. An aft deck configuration, where part of the aircraft shields the nozzle plume, was also tested. Retroreflective Background-Oriented Schlieren (RBOS) was used to obtain schlieren images of the flow field around the model and behind the model. This study compares wind tunnel data and numerical simulations conducted by the NASA Tetrahedral Unstructured Software System CFD code, USM3D.

Winski, Courtney S.↗
DOE OSTI2021

Experimental validation of shock propagation through a foam with engineered macro-pores

The engineered macro-pore foam provides a new way to study thermonuclear burn physics by utilizing capsules containing deuterated (D) foam and filling tritium (T) gas in the engineered macro-pores. The implosion of a thermonuclear capsule filled with an engineered macro-pore foam will be complex due to the interaction of a shock wave with the engineered macro-pores. It is our goal to quantify how substantially complex foam structures affect the shape of shock and bulk shock speed. A cylinder-shape shock tube experiment has been designed and performed at the Omega Laser Facility. In order to examine how a foam structure will affect shock propagation, we performed several tests varying (1) engineered macro-pore size, (2) average foam density, and (3) with/without neopentane (C 5 H 12 ) gas. X-ray radiographic data indicate that shock speed through engineered macro-pore foams depends strongly on average foam density and less on pore size. In this work, experimental shock propagation data helped guide two numerical simulation approaches: (1) a 2D simulation with homogenizing foams rather than explicitly simulating engineered macro-pores and (2) a 2D toroidal-pore approximation adopting a toroidal-tube geometry to model engineered macro-pores.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Investigation of a mixed compression axisymmetric inlet at Mach number 5.3

The hypersonic diffuser portion of an uncooled high performance mixed compression, axisymmetric inlet suitable for subsonic burning engines was designed and tested. Performance of a model with a 25.4-cm capture diameter was measured in a wind tunnel and the results were compared with theoretical predictions calculated by a comprehensive computer program. All tests were conducted at a Mach number of 5.3 at a total temperature of 667 K and a total pressure of 11.57 atm. The angle of attack ranged from 0 to + or - 3 deg. Performance at angle of attack remained high. Reasonably high performance in the throat (maximum throat pitot-pressure recovery of 77 percent and an average value of 58 percent) was obtained at 0 deg angle of attack with relatively large amounts of boundary-layer bleed (11 to 22 percent of the capture mass flow). The computer program used in the design of this inlet is considered marginally adequate for predicting hypersonic inlet flow fields. Although the program as it now exists is very useful, an improved computer program that more accurately predicts the boundary layer and the shock-wave-boundary-layer interaction and accounts for boundary-layer bleed should be developed for reliability predicting hypersonic inlet flow fields.

Latham, E. A.↗
NASA NTRS1974

Calculation of turbulent shear stress in supersonic boundary layer flows

Turbulent shear stress distributions for supersonic boundary layer flows have been computed from experimental mean boundary layer data. The computations have been made by numerically integrating the time averaged continuity and streamwise momentum equations. Distributions have been obtained for flows upstream and downstream of shock-wave-boundary layer interactions and for both two-dimensional and axisymmetric flows. The computed results are compared with recently reported shear stress measurements which were obtained by hot wire anemometer and laser velocimeter techniques.

Sun, C. C.↗
NASA NTRS1974

Fuel droplet combustion

An analytical model is developed that demonstrates the behavior of fuel drop ignition, and experimental results are presented that describe the effect of aerodynamic shattering on the process of fuel drop ignition. It is shown that the explosive ignition of a fuel drop which interacts with a shock wave in an oxidizing atmosphere depends upon the production of a fuel-oxidizer mixture in the wake of the original drop. The creation of this mixture is dependent on the formation of fine spray as a result of the aerodynamic shattering of the original fuel drop, the evaporation of the fine spray, and the mixing of the fuel vapor with the surrounding hot oxidizer. Only then does the explosive ignition occur as a result of the chemical reaction between the gaseous fuel and oxidizer.

Kauffman, C. W.↗
NASA NTRS1976

An efficient numerical method for solving the time-dependent compressible Navier-Stokes equations at high Reynolds number

A fine-mesh method incorporating two new operators, which drastically reduces the computation time, has been developed for solving the time-dependent Navier-Stokes equations at flight Reynolds numbers. The approach time-splits the equations into a hyperbolic part and a parabolic part, solves the hyperbolic part by a new explicit numerical method based on characteristics theory, and solves the parabolic part by a new efficient implicit parabolic method. The method has reduced the computation time by one and two orders of magnitude from that required previously to solve for the interaction of a shock wave with a boundary layer on a flat plate.

Maccormack, R. W.↗
NASA NTRS1978

A new method for designing shock-free transonic configurations

A method for the design of shock free supercritical airfoils, wings, and three dimensional configurations is described. Results illustrating the procedure in two and three dimensions are given. They include modifications to part of the upper surface of an NACA 64A410 airfoil that will maintain shock free flow over a range of Mach numbers for a fixed lift coefficient, and the modifications required on part of the upper surface of a swept wing with an NACA 64A410 root section to achieve shock free flow. While the results are given for inviscid flow, the same procedures can be employed iteratively with a boundary layer calculation in order to achieve shock free viscous designs. With a shock free pressure field the boundary layer calculation will be reliable and not complicated by the difficulties of shock wave boundary layer interaction.

Sobieczky, H.↗
NASA NTRS1978

Shock wave ignition of magnesium powders

The paper is concerned with magnesium powder ignition caused by the interaction of powder with incident shock wave-induced flows. Experimentally observed ignition delays are correlated with predicted times for particle melting and the onset of thermal erosion, and a good agreement is found between experiment and theory. Ignition delays were measured as functions of particle screening, cloud concentration, incident shock strength, initial pressure, and oxygen concentration (diluted with nitrogen). An expression for the Nusselt number in the Reynolds number range 0-10,000 and the Mach number range 0-6 is proposed. The expression, when applied to predict particle behavior, provides results in agreement with experimental data for M/Re less than 0.5.

Fox, T. W.↗
NASA NTRS1982

Calculation of the flow field including boundary layer effects for supersonic mixed compression inlets at angles of attack

The flow field in supersonic mixed compression aircraft inlets at angle of attack is calculated. A zonal modeling technique is employed to obtain the solution which divides the flow field into different computational regions. The computational regions consist of a supersonic core flow, boundary layer flows adjacent to both the forebody/centerbody and cowl contours, and flow in the shock wave boundary layer interaction regions. The zonal modeling analysis is described and some computational results are presented. The governing equations for the supersonic core flow form a hyperbolic system of partial differential equations. The equations for the characteristic surfaces and the compatibility equations applicable along these surfaces are derived. The characteristic surfaces are the stream surfaces, which are surfaces composed of streamlines, and the wave surfaces, which are surfaces tangent to a Mach conoid. The compatibility equations are expressed as directional derivatives along streamlines and bicharacteristics, which are the lines of tangency between a wave surface and a Mach conoid.

Vadyak, J.↗
NASA NTRS1983

Psuedospectral calculation of shock turbulence interactions

A Chebyshev-Fourier discretization with shock fitting is used to solve the unsteady Euler equations. The method is applied to shock interactions with plane waves and with a simple model of homogeneous isotropic turbulence. The plane wave solutions are compared to linear theory.

Zang, T. A.↗
NASA NTRS1982

Shock-fitted Euler solutions to shock-vortex interactions

The interaction of a shock wave with a hot spot, a single vortex and a vortex street is studied within the framework of the two dimensional compressible Euler equations. The numerical results obtained by the pseudospectral method and the finite difference MacCormack method are compared. In both the methods the shock wave is fitted as a boundary of the computational domain.

Salas, M. E.↗