Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Remote”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Remote Alaska Communities Energy Efficiency Competition: Energy Efficiency for the Gem of the Yukon (Final Report)

Over the past decade, the City of Ruby has been proactive in working to reduce cost and energy use in the community. Ruby (Tl’aa’ologhe) is a remote city in Alaska located on the south bank of the Yukon River near the Kilbuck-Kuskokwim Mountains, about 50 air miles east of Galena and 230 air miles west of Fairbanks. As of 2019, the community has a population of over 150 people and most of Ruby’s residents are Koyukon Athabascan. Ruby has a long history of promoting local efficiency and clean energy in an effort to become more sustainable. Between 2007-2010, the community hosted Alaska’s first demonstration of an in-river hydrokinetic test project, sponsored by the Yukon River Inter-Tribal Watershed Council. In 2011, a 5kW solar photo-voltaic (PV) array was installed by the Interior Regional Housing Authority. In 2012, the community had a new power plant constructed by the Alaska Energy Authority that supplies waste heat to the washeteria, clinic and public safety garage, saving the community more than 4,000 gallons of heating fuel per year. The clinic, constructed by the Tanana Chiefs Conference, is one of the most energy efficient buildings in the interior and utilizes new building efficiency standards that were passed by the tribes. It has a 5kW solar PV array that provides energy into the local electric grid and offsets approximately 20% of the annual energy use. Building on this legacy, the City of Ruby entered into Department of Energy’s (DOE’s) Remote Alaska Communities Energy Efficiency Competition (RACEE) in 2016, pledging to reduce per-capita energy use 15% by 2020. During the second phase of the competition, 13 communities including Ruby were provided funding for tailored technical assistance to measure energy use and create energy efficiency plans.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Remote Power Distribution Prototyping for Bergoz ACCT

The objective of this project focuses on the design and construction of remote power distribution to the Bergoz ACCT amplifier module. Responsibilities included designing a prototype amplifier placeholder using SketchUp, 3D printing it using PrusaSlicer, and mounting the placeholder inside a junction box with 35 mm DIN rail. Wiring was run through a penetration in a wall inside the accelerator building to the Tevatron to keep all electronics outside the radioactive enclosure. A Power over Ethernet switch was set up for remote power distribution to the amplifier. This project ensures that the amplifier module can be effectively integrated and managed within Fermilab's infrastructure once it is procured.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

LBNF Target Complex Remote Handling

The Long Baseline Neutrino Facility (LBNF) near site at the Fermilab campus in Illinois, USA includes a target complex which houses a 1.5 – 1.8m long graphite neutrino production target, a pre-target baffle, three neutrino focusing horns (A,B,C), and a decay pipe 200m in length leading to an energy absorber / beam dump housed in an adjacent absorber building. The prompt dose rates are such that the Target Hall must be unoccupied while beam is on target. During maintenance periods, the Target Hall can be occupied by trained personnel. However, residual dose rates of activated components necessitate certain operations, such as the annual replacement of the target, be executed remotely by personnel located in a shielded room within the Target Hall. This presentation covers details designed into the infrastructure, equipment, and procedures to allow for successful execution of remote handling operations.

43 PARTICLE ACCELERATORS↗

Use of Radiofrequency Tamper Indicating Devices (RFTID) to Enhance Remotely Monitoring the Security of Advanced and Small Modular Reactors (A/SMRs)

A/SMRs will likely be deployed in remote locations that are difficult to access, thereby requiring limited on-site staff. • Vendors are considering remote monitoring as a solution to enhance nuclear security. RFTIDs are a candidate technology for maintaining nuclear security of A/SMRs but need to be evaluated for feasibility and implementation into the wider physical protection system.

O'Dowd, Kevin [Savannah River National Laboratory ↗

Remote Instrumentation and Data Acquisition

This poster outlines the development and implementation of a remote data acquisition system for waveform analysis using a Rohde & Schwarz oscilloscope. The project involved capturing waveform data, and transferring it to a local machine for visualization and analysis. The core logic was developed in C++ with a focus on object oriented programming and the use of polymorphism so the main application can interact with any instrument without knowing its exact type, simplifying the overall logic and making it easier to add or swap out components without changing the rest of the codebase.. The system issues Standard Commands for Programmable Instruments (SCPI) via a socket connection and parses the oscilloscope s ASCII waveform data. The C++ application was containerized using Docker for ease of portability, and reproducibility. Emphasis was placed on secure networking practices, error handling, and effective data capture. The report describes the technical steps taken, challenges encountered, and future work, providing insight into the practical integration of hardware interfacing with remote computational environments.

Parikh, Jaymil [Illinois U., Urbana]↗

Precursor Analysis Report: Remote Access Attack on Oldsmar Water Treatment Facility 2021

The Remote Access Attack on Oldsmar Water Treatment Facility 2021 Precursor Analysis Report leverages publicly available information about the Oldsmar cyber attack and catalogs anomalous observables for each technique employed in the attack. This analysis is based upon the methodology of the Cybersecurity for the Operational Technology Environment (CyOTE) program. On 5 February 2021, an adversary gained unauthorized remote access to Bruce T. Haddock Water Treatment Plant in Oldsmar, Florida, which provides treated water to 15,000 customers. The adversary accessed the facility’s Supervisory Control and Data Acquisition (SCADA) workstation and human machine interface (HMI) to change the chemical concentration of sodium hydroxide, commonly referred to as lye and used to regulate acidity levels, from 100 parts per million (PPM) to 11,100 PPM. The chemical was raised to lethal levels that if ingested could lead to serious soft tissue damage, burns, or even death. The facility, however, had redundancies and alarms in place to alert personnel of dangerous chemical levels, and facility officials stated it would have taken 24 to 36 hours for the chemical changes to affect the water supply. Researchers and analysts identified six unique techniques utilized during the attack with a total of 23 observables using MITRE ATT&CK® for Industrial Control Systems. The CyOTE program assesses observables accompanying techniques used prior to the triggering event to identify opportunities to detect malicious activity. If observables accompanying the attack techniques are perceived and investigated prior to the triggering event, earlier comprehension of malicious activity can take place. Four of the identified techniques used during the Oldsmar cyber attack were precursors to the triggering event. Analysis identified 21 observables associated with these precursor techniques, 20 of which were assessed to have an increased likelihood of being perceived in the minutes preceding the triggering event. The response and comprehension time could have been reduced if the observables had been identified earlier. The information gathered in this report contributes to a library of observables tied to a repository of artifacts, data sources, and technique detection references for practitioners and developers to support the comprehension of indicators of attack. Asset owners and operators can use these products if they experience similar observables or to prepare for comparable scenarios.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Planetary Boundary-Layer Height (PBLHT) Value-Added Product: Remote-Sensing Retrievals

The planetary boundary layer (PBL) is fundamental to numerous atmospheric processes, including aerosol mixing and transport, cloud evolution, and precipitation formation. A critical parameter in these studies is the PBL height (PBLHT). This vertical depth is essential for characterizing PBL structures in numerical simulations and serves as a primary metric for estimating flux exchanges between the Earth’s surface and the atmosphere. Radiosonde (SONDE) observations provide high-vertical-resolution measurements of temperature and moisture profiles and are widely used to estimate PBLHT (Liu and Liang 2010, Seidel et al. 2010). The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s PBLHT value-added product (VAP) for radiosonde measurements, known as PBLHTSONDE, applies three commonly used methods—the Heffter (1980) method, the Liu and Liang (2010) method, and the bulk Richardson number approach (Seibert et al. 2000)—to derive PBLHT. The PBLHTSONDE VAP operates routinely at ARM observatories and mobile facilities, with data available from the ARM Data Center shortly after sounding observations are collected (Sivaraman et al. 2013). However, radiosonde observations are limited by their low temporal resolution. Most stations launch soundings only twice daily, which constrains the ability to investigate and characterize the temporal evolution of the PBL using radiosonde data alone. The use of continuous remote-sensing observations provides high temporal resolution of PBLHT estimates. These observations include aerosol lidars (Dang et al. 2019, Su et al. 2020), Doppler lidar (DL; Tucker et al. 2009, Krishnamurthy et al. 2021), and water vapor and/or temperature lidars and radiometers (Turner et al. 2014). These observations provide valuable data on the PBL’s thermodynamic properties (e.g., water vapor and/or temperature lidars and radiometers), dynamic properties (e.g., DL), and distribution of tracer substances (e.g., aerosol lidars), all of which can be used to estimate PBLHT. ARM developed PBLHT estimates from the micropulse lidar (MPL; PBLHTMPL), Doppler lidar (PBLHTDL), and combined Raman lidar (RL)/atmospheric emitted radiance interferometer (AERI) thermodynamic profiles (PBLHTTHERMO). Each estimate captures different physical characteristics of the boundary layer—aerosol tracers, vertical velocity turbulence, and thermodynamic structure—and exhibits distinct strengths and limitations depending on the PBL regime and time of day. In addition, the ARM ceilometer (CEIL) provides three potential PBLHT candidates derived from the vendor's built-in algorithm. Building on these individual retrievals, ARM developed the PBLHTBEML VAP, which combines the four remote-sensing-based estimates with ancillary meteorological variables using the machine learning approach of Zhang et al. (2025) to produce a best-estimate PBLHT at 10-minute resolution.

54 ENVIRONMENTAL SCIENCES↗

The Utility of Satellites and Autonomous Remote Sensing Platforms for Monitoring Offshore Aquaculture Farms: A Case Study for Canopy Forming Kelps

The emerging sector of offshore kelp aquaculture represents an opportunity to produce biofuel feedstock to help meet growing energy demand. Giant kelp represents an attractive aquaculture crop due to its rapid growth and production, however precision farming over large scales is required to make this crop economically viable. These demands necessitate high frequency monitoring to ensure outplant success, maximum production, and optimum quality of harvested biomass, while the long distance from shore and large necessary scales of production makes in person monitoring impractical. Remote sensing offers a practical monitoring solution and nascent imaging technologies could be leveraged to provide daily products of the kelp canopy and subsurface structures over unprecedented spatial scales. Here, we evaluate the efficacy of remote sensing from satellites and aerial and underwater autonomous vehicles as potential monitoring platforms for offshore kelp aquaculture farms. Decadal-scale analyses of the Southern California Bight showed that high offshore summertime cloud cover restricts the ability of satellite sensors to provide high frequency direct monitoring of these farms. By contrast, daily monitoring of offshore farms using sensors mounted to aerial and underwater drones seems promising. Small Unoccupied Aircraft Systems (sUAS) carrying lightweight optical sensors can provide estimates of canopy area, density, and tissue nitrogen content on the time and space scales necessary for observing changes in this highly dynamic species. Underwater color imagery can be rapidly classified using deep learning models to identify kelp outplants on a longline farm and high acoustic returns of kelp pneumatocysts from side scan sonar imagery signal an ability to monitor the subsurface development of kelp fronds. Current sensing technologies can be used to develop additional machine learning and spectral algorithms to monitor outplant health and canopy macromolecular content, however future developments in vehicle and infrastructure technologies are necessary to reduce costs and transcend operational limitations for continuous deployment in an offshore setting.

54 ENVIRONMENTAL SCIENCES↗

The Clinical Assessment and Remote Administration Tablet

Electronic data capture of case report forms, demographic, neuropsychiatric, or clinical assessments, can vary from scanning hand-written forms into databases to fully electronic systems. Web-based forms can be extremely useful for self-assessment; however, in the case of neuropsychiatric assessments, self-assessment is often not an option. The clinician often must be the person either summarizing or making their best judgment about the subject’s response in order to complete an assessment, and having the clinician turn away to type into a web browser may be disruptive to the flow of the interview. The Mind Research Network has developed a prototype for a software tool for the real-time acquisition and validation of clinical assessments in remote environments.We have developed the clinical assessment and remote administration tablet on a Microsoft Windows PC tablet system, which has been adapted to interact with various data models already in use in several large-scale databases of neuroimaging studies in clinical populations. The tablet has been used successfully to collect and administer clinical assessments in several largescale studies, so that the correct clinical measures are integrated with the correct imaging and other data. It has proven to be incredibly valuable in confirming that data collection across multiple research groups is performed similarly, quickly, and with accountability for incomplete datasets. We present the overall architecture and an evaluation of its use.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Remotely Sensed Spatial Structure as an Indicator of Internal Changes of Vegetation Communities in Desert Landscapes

Desert environments are sensitive to disturbances, and their functions and processes can take many years to recover. Detecting early signs of disturbance is critical, but developing such a capability for expansive remote desert regions is challenging. Using a variogram and 15-cm resolution Visible Atmospherically Resistant Index (VARI) imagery, we examined the usefulness of the spatial structure of desert lands for monitoring early signs of habitat changes using the Riverside East solar energy zone located within Riverside County, California. We tested the method on four habitat types in the region, Parkinsonia florida–Olneya tesota , Chorizanthe rigida–Geraea canescens , Larrea tridentata–Ambrosia dumosa , and Larrea tridentata–Encelia farinosa alliances. The results showed that the sill, range, form, and partial sill of the variogram generated from VARI strongly correlate with overall vegetation cover, average canopy size, canopy size variation, and spatial structure within a dryland habitat, respectively. Establishing a baseline of variogram parameters for each habitat and comparing to subsequent monitoring parameters would be most effective for detecting internal changes because values of variogram parameters would not match absolute values of landscape properties. When monitoring habitats across varying landscape characteristics, a single appropriate image resolution would likely be the resolution that could adequately characterize the habitat dominated by the smallest vegetation. For the variogram generated from VARI, which correlates to vegetation greenness, the sills may indicate the health of vegetation communities. However, further studies are warranted to determine the effectiveness of variograms for monitoring habitat health. Remotely sensed landscape structure obtained from variograms could provide complementary information to traditional methods for monitoring internal changes in dryland vegetation communities.

54 ENVIRONMENTAL SCIENCES↗

Deep Learning Classification of Cheatgrass Invasion in the Western United States Using Biophysical and Remote Sensing Data

Cheatgrass (Bromus tectorum) invasion is driving an emerging cycle of increased fire frequency and irreversible loss of wildlife habitat in the western US. Yet, detailed spatial information about its occurrence is still lacking for much of its presumably invaded range. Deep learning (DL) has demonstrated success for remote sensing applications but is less tested on more challenging tasks like identifying biological invasions using sub-pixel phenomena. We compare two DL architectures and the more conventional Random Forest and Logistic Regression methods to improve upon a previous effort to map cheatgrass occurrence at >2% canopy cover. High-dimensional sets of biophysical, MODIS, and Landsat-7 ETM+ predictor variables are also compared to evaluate different multi-modal data strategies. All model configurations improved results relative to the case study and accuracy generally improved by combining data from both sensors with biophysical data. Cheatgrass occurrence is mapped at 30 m ground sample distance (GSD) with an estimated 78.1% accuracy, compared to 250-m GSD and 71% map accuracy in the case study. Furthermore, DL is shown to be competitive with well-established machine learning methods in a limited data regime, suggesting it can be an effective tool for mapping biological invasions and more broadly for multi-modal remote sensing applications.

54 ENVIRONMENTAL SCIENCES↗

Quantification of Off-Channel Inundated Habitat for Pacific Chinook Salmon ( Oncorhynchus tshawytscha ) along the Sacramento River, California, Using Remote Sensing Imagery

Off-channel areas are one of the most impacted aquatic habitats by humans globally, as extensive agricultural and urban development has limited them to roughly 10% of historical extent. This is also true for California’s Sacramento River Valley, where historically frequent widespread inundation has been reduced to a few off-channel water bodies along the mid-Sacramento River. This remaining shallow-water habitat provides crucial ecological benefits to multiple avian and fish species, but especially to floodplain-adapted species such as Chinook salmon (Oncorhynchus tshawytscha). Characterizing spatiotemporal off-channel dynamics, including inundation extent and residence time, is fundamental to better understanding the intrinsic value of such habitats and their potential to support recovery actions. Remote sensing techniques have been increasingly used to map surface water at regional and local scales, with improved resolutions. As such, this study maps off-channel inundation areas and describes their temporal dynamics by analyzing pixel-based time- series of multiple water indices, modified Normalized Difference Water Index (mNDWI) and the Automated Water Extraction Index (AWEI), generated from LandSat-8 and Sentinel-2 data between 2013–2021. Quantified off-channel area was similar with each water index and method used, but improved performance was associated with Sentinel-2 products and AWEI index to identify wetted areas under lower mainstem discharges. Results indicate an uneven distribution of off-channel habitat in the study area, with limited inundated areas in upstream reaches (<16% of total off-channel area for greater flows). In addition, much less habitat exists for flows under 400 m 3 /s, an important migration cue for endangered winter-run Chinook salmon, limiting juvenile access to areas with enhanced rearing conditions. Off-channel habitat residence times averaged between 7 and 16 days, primarily defined by the rate of receding flows, with rapid flow recession providing marginal off-channel habitat. This study shows reasonable performance of moderate resolution LandSat-8 and Sentinel-2 remote sensing imagery to characterize shallow-water inundated habitat in higher-order rivers, and as a method to inform restoration and native fish recovery efforts.

54 ENVIRONMENTAL SCIENCES↗

Intercomparison of Planetary Boundary Layer Heights Using Remote Sensing Retrievals and ERA5 Reanalysis over Central Amazonia

The atmospheric boundary layer height (zi) is a key parameter in the vertical transport of mass, energy, moisture, and chemical species between the surface and the free atmosphere. There is a lack of long-term and continuous observations of zi, however, particularly for remote regions, such as the Amazon forest. Reanalysis products, such as ERA5, can fill this gap by providing temporally and spatially resolved information on zi. In this work, we evaluate the ERA5 estimates of zi (zi-ERA5) for two locations in the Amazon and corrected them by means of ceilometer, radiosondes, and SODAR measurements (zi-experimental). The experimental data were obtained at the remote Amazon Tall Tower Observatory (ATTO) with its pristine tropical forest cover and the T3 site downwind of the city of Manaus with a mixture of forest (63%), pasture (17%), and rivers (20%). We focus on the rather typical year 2014 and the El Niño year 2015. The comparison of the experimental vs. ERA5 zi data yielded the following results: (i) zi-ERA5 underestimates zi-experimental daytime at the T3 site for both years 2014 (30%, underestimate) and 2015 (15%, underestimate); (ii) zi-ERA5 overestimates zi-experimental daytime at ATTO site (12%, overestimate); (iii) during nighttime, no significant correlation between the zi-experimental and zi-ERA5 was observed. Based on these findings, we propose a correction for the daytime zi-ERA5, for both sites and for both years, which yields a better agreement between experimental and ERA5 data. These results and corrections are relevant for studies at ATTO and the T3 site and can likely also be applied at further locations in the Amazon.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of CLM4 Solar Radiation Partitioning Scheme Using Remote Sensing and Site Level FPAR Datasets

This paper examines a land surface solar radiation partitioning scheme, i.e., that of the Community Land Model version 4 (CLM4) with coupled carbon and nitrogen cycles. Taking advantage of a unique 30-year fraction of absorbed photosynthetically active radiation (FPAR) dataset derived from the Global Inventory Modeling and Mapping Studies (GIMMS) normalized difference vegetation index (NDVI) data set, multiple other remote sensing datasets, and site level observations, we evaluated the CLM4 FPAR ’s seasonal cycle, diurnal cycle, long-term trends and spatial patterns. These findings show that the model generally agrees with observations in the seasonal cycle, long-term trends, and spatial patterns, but does not reproduce the diurnal cycle. Discrepancies also exist in seasonality magnitudes, peak value months, and spatial heterogeneity. Here, we identify the discrepancy in the diurnal cycle as, due to, the absence of dependence on sun angle in the model. Implementation of sun angle dependence in a one-dimensional (1-D) model is proposed. The need for better relating of vegetation to climate in the model, indicated by long-term trends, is also noted. Evaluation of the CLM4 land surface solar radiation partitioning scheme using remote sensing and site level FPAR datasets provides targets for future development in its representation of this naturally complicated process.

58 GEOSCIENCES↗

Remote-Sensed Monitoring of Dominant Plant Species Distribution and Dynamics at Jiuduansha Wetland in Shanghai, China

Spartina alterniflora is one of the most hazardous invasive plant species in China. Monitoring the changes in dominant plant species can help identify the invasion mechanisms of S. alterniflora, thereby providing scientific guidelines on managing or controlling the spreading of this invasive species at Jiuduansha Wetland in Shanghai, China. However, because of the complex terrain and the inaccessibility of tidal wetlands, it is very difficult to conduct field experiments on a large scale in this wetland. Hence, remote sensing plays an important role in monitoring the dynamics of plant species and its distribution on both spatial and temporal scales. In this paper, based on multi-spectral and high resolution (<10 m) remote sensing images and field observational data, we analyzed spectral characteristics of four dominant plant species at different green-up phenophases. Based on the difference in spectral characteristics, a decision tree classification was built for identifying the distribution of these plant species. The results indicated that the overall classification accuracy for plant species was 87.17%, and the Kappa Coefficient was 0.81, implying that our classification method could effectively identify the four plant species. We found that the area of Phragmites australi showed an increasing trend from 1997 to 2004 and from 2004 to 2012, with an annual spreading rate of 33.77% and 31.92%, respectively. The area of Scirpus mariqueter displayed an increasing trend from 1997 to 2004 (12.16% per year) and a decreasing trend from 2004 to 2012 (-7.05% per year). S. alterniflora has the biggest area (3302.20 ha) as compared to other species, accounting for 51% of total vegetated area at the study region in 2012. It showed an increasing trend from 1997 to 2004 and from 2004 to 2012, with an annual spreading rate of 130.63% and 28.11%, respectively. As a result, the native species P. australi was surrounded and the habitats of S. mariqueter were occupied by S. alterniflora. The high proliferation ability and competitive advantage for S. alterniflora inhibited the growth of other plant species and we anticipate a continuous expansion of this invasive species at Jiuduansha Wetland. Finally, effective measures should be taken to control the invasion of S. alterniflora.

54 ENVIRONMENTAL SCIENCES↗

Sensitivity of thermodynamic profiles retrieved from ground-based microwave and infrared observations to additional input data from active remote sensing instruments and numerical weather prediction models

Accurate and continuous estimates of the thermodynamic structure of the lower atmosphere are highly beneficial to meteorological process understanding and its applications, such as weather forecasting. In this study, the Tropospheric Remotely Observed Profiling via Optimal Estimation (TROPoe) physical retrieval is used to retrieve temperature and humidity profiles from various combinations of input data collected by passive and active remote sensing instruments, in situ surface platforms, and numerical weather prediction models. Among the employed instruments are microwave radiometers (MWRs), infrared spectrometers (IRSs), radio acoustic sounding systems (RASSs), ceilometers, and surface sensors. TROPoe uses brightness temperatures and/or radiances from MWRs and IRSs, as well as other observational inputs (virtual temperature from the RASS, cloud-base height from the ceilometer, pressure, temperature, and humidity from the surface sensors) in a physical iterative retrieval approach. This starts from a climatologically reasonable profile of temperature and water vapor, with the radiative transfer model iteratively adjusting the assumed temperature and humidity profiles until the derived brightness temperatures and radiances match those observed by the MWR and/or IRS instruments within a specified uncertainty, as well as within the uncertainties of the other observations, if used as input. In this study, due to the uniqueness of the dataset that includes all the above-mentioned sensors, TROPoe is tested with different observational input combinations, some of which also include information higher than 4 km above ground level (a.g.l.) from the operational Rapid Refresh numerical weather prediction model. These temperature and humidity retrievals are assessed against independent collocated radiosonde profiles under non-cloudy conditions to assess the sensitivity of the TROPoe retrievals to different input combinations.

54 ENVIRONMENTAL SCIENCES↗

Ground-based remote sensing scheme for monitoring aerosol–cloud interactions

A new method for continuous observation of aerosol–cloud interactions with ground-based remote sensing instruments is presented. The main goal of this method is to enable the monitoring of the change of the cloud droplet size due to the change in the aerosol concentration. We use high-resolution measurements from a lidar, a radar and a radiometer, which allow us to collect and compare data continuously. This method is based on a standardised data format from Cloudnet and can be implemented at any observatory where the Cloudnet data set is available. Two example case studies were chosen from the Atmospheric Radiation Measurement (ARM) Program deployment on Graciosa Island, Azores, Portugal, in 2009 to present the method. We use the cloud droplet effective radius ( r e ) to represent cloud microphysical properties and an integrated value of the attenuated backscatter coefficient (ATB) below the cloud to represent the aerosol concentration. All data from each case study are divided into bins of the liquid water path (LWP), each 10 g m -2 wide. For every LWP bin we present the correlation coefficient between ln r e and ln ATB, as well as ACI r (defined as ACI r = -d ln r e d ln ATB, change in cloud droplet effective radius with aerosol concentration). Obtained values of ACI r are in the range 0.01–0.1. In conclusion, we show that ground-based remote sensing instruments used in synergy can efficiently and continuously monitor aerosol–cloud interactions.

54 ENVIRONMENTAL SCIENCES↗

Measurements from mobile surface vehicles during the Lower Atmospheric Profiling Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE)

Abstract. Between 14 and 20 July 2018, small unmanned aircraft systems (UASs) were deployed to the San Luis Valley of Colorado (USA) alongside surface-based remote sensors, in situ sensors, and radiosonde systems as part of the Lower Atmospheric Profiling Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE). The measurements collected as part of LAPSE-RATE targeted quantities related to enhancing our understanding of boundary layer structure, cloud and aerosol properties and surface–atmosphere exchange and provide detailed information to support model evaluation and improvement work. Additionally, intensive intercomparison between the different unmanned aircraft platforms was completed. The current paper describes the observations obtained using three different types of surface-based mobile observing vehicles. These included the University of Colorado Mobile UAS Research Collaboratory (MURC), the National Oceanic and Atmospheric Administration National Severe Storms Laboratory Mobile Mesonet, and two University of Nebraska Combined Mesonet and Tracker (CoMeT) vehicles. Over the 1-week campaign, a total of 143 h of data were collected using this combination of vehicles. The data from these coordinated activities provide detailed perspectives on the spatial variability of atmospheric state parameters (air temperature, humidity, pressure, and wind) throughout the northern half of the San Luis Valley. These datasets have been checked for quality and published to the Zenodo data archive under a specific “community” setup for LAPSE-RATE (https://zenodo.org/communities/lapse-rate/, last access: 21 January 2021) and are accessible at no cost by all registered users. The primary dataset DOIs are https://doi.org/10.5281/zenodo.3814765 (CU MURC measurements; de Boer et al., 2020d), https://doi.org/10.5281/zenodo.3738175 (NSSL MM measurements; Waugh, 2020), and https://doi.org/10.5281/zenodo.3838724 (UNL CoMeT measurements; Houston and Erwin, 2020).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗