Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RELEASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Comparison of Fission Product Release Predictions using PARFUME and BISON with Results from the AGR-3/4 Irradiation Experiment

The PARFUME (PARticle Fuel ModEl) fuel performance modeling code and the BISON nuclear fuel performance application built on the Multiphysics Object-Oriented Simulation Environment (MOOSE) finite element library were used to predict the fission product release from tristructural isotropic (TRISO) coated fuel particles and compacts during the third and fourth irradiation experiment of the Advanced Gas Reactor (AGR-3/4) Fuel Development and Qualification Program. The fuel performance modeling codes PARFUME and BISON modeled the AGR-3/4 irradiation experiment using the fuel compact time-averaged volume averaged (TAVA) daily temperatures for a total irradiation duration of 369.1 effective full power days (EFPD) to predict the release fraction of the fission product silver (Ag-110m) from a representative TRISO-coated fuel particle from AGR-3/4 compacts. Post-irradiation examination (PIE) measurements provided data on the release of these fission products in the compacts outside of the silicon carbide (SIC) layer. The PARFUME and BISON results were then compared to the silver release measured from compact gamma scanning. The results showed good agreement between PARFUME and BISON but both codes under-predicted the silver release fraction for all the compacts. In addition, BISON was used to model and predict the fission product concentration radial profile outside of the compacts in capsules’ inner and outer rings. These rings were either comprised of matrix and/or structural graphite. To obtain the concentration profiles of silver, cesium, and strontium, a sorption isotherm model was developed in BISON to capture the effects of fission product transport across the gaps between the concentric rings. The general shape of the concentration radial profiles as calculated by BISON were similar in the inner ring (IR) but varied in the outer ring (OR) depending on the fission product of interest or capsule temperature. Using this methodology and model, BISON now has the capability to aid in developing new fission product diffusion coefficients for matrix or structural graphite materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Determination of the potential for release of mercury from combustion product amended soils: Part 2 - Coal fly ash generated stabilized soil and degradation products

The potential for mercury (Hg) releases to the air and water from three soils, two subbituminous coal fly ashes, and mixtures of these materials as stabilized soil was assessed. In addition, the potential for Hg release from crushed stabilized material mixed into soil simulating degradation over time was investigated. In general, atmospheric Hg deposition was measured for the ash and materials made using the ash with the higher Hg concentration, whereas the second ash material and materials generated using this ash exhibited emission as the dominant flux. Fluxes measured from stabilized material were less than that measured for the pure ash material but of the same direction. Although the stabilized and degraded stabilized materials exhibited Hg fluxes that were significantly different from base soils, values were within the range reported for low Hg-containing background soils. Because of limitations of the experimental design (i.e., reduced light exposures and measurement of flux from dry materials) reported fluxes are most likely underestimates of that which would occur in the natural environment. Materials made to simulate degradation of the stabilized material did not exhibit higher releases than the stabilized material alone. Synthetic Precipitation Leaching Procedure (SPLP; EPA method 1312) results showed that the chemistry of a soil, especially pH, may influence the amount of Hg released to soil solutions, with more acidic soils potentially enhancing Hg release. 25 refs., 9 figs., 4 tabs.

01 COAL, LIGNITE, AND PEAT↗

AGR TRISO Fuel Fission Product Release Data Summary

Knowledge of fission product retention in and release from TRISO fuel under normal and off-normal conditions is needed for reactor safety analyses. This is important for coated-particle fuel used in high-temperature reactors relying on the functional containment strategy. Data on the release and retention of key fission products (e.g., Ag-110m, Cs-134, Eu-154, and Sr-90) in AGR UCO TRISO fuels have been summarized in this report, and empirical relationships with respect to time and temperature were developed. This included fission product accumulation in the OPyC and compact graphitic matrix during irradiation, release from compacts during irradiation, and release during post-irradiation safety testing at temperatures from 1600-1800°C. The frequencies of SiC failure and TRISO coating failure from irradiation and post-irradiation safety testing were also summarized as they have bearing on the quantities of Cs release from the fuel. In a forthcoming publication, a framework for combining and using these empirical relationships as part of a source term analysis will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluating a Historical Airborne Release Test with Modern Modeling Methods

Safety analysts throughout the U.S. Department of Energy (DOE) complex rely on the data provided in the DOE Handbook, DOE-HDBK-3010, to determine source terms that may be incorporated into the document safety analyses. Most often, analysts simply take the bounding values due to time constraints or simply to bound calculations. This is a safe approach that helps avoid regulatory critique; however, it may not provide results that are meaningful or relevant to the conditions being evaluated. The derivation of the data, such as airborne release fractions (ARFs) and respirable fractions (RFs) in the Handbook often depend on very limited table-top and bench/laboratory experiments, as well as engineering judgment which may not be well substantiated, and may not be representative of the actual situation. One historical dataset included a test where a solid contaminant was sprinkled over a liquid gasoline pool and set on fire (also referred to as Mishima and Schwendiman's test later in this paper). The airborne release was measured over the duration of the burn, but then collected separately for a time after the burning was completed. It can be assumed that the collected contaminant in the latter period corresponds to re-suspended particles, whereas the earlier period collected contaminant includes a combination of directly released as well as early released re-suspended particles. This scenario was recently modeled using SIERRA/Fuego as part of a parametric sensitivity study, however there were some shortcomings of the analysis methods. First, the code at the time lacked a multi-component particle evaporation model, which is necessary to capture the particle size effect of liquid/solid particles that can dynamically evaporate the liquid component. Second, a particle sticking and resuspension model did not exist at the time of the study. Recent model implementation now permits the study be repeated with the improved physical models. In the earlier work, four potential mechanisms were considered to potentially contribute to the release of the particles. These were: 1. Evaporation Induced Entrainment (EIE); 2. Surface Agitation by Wind; 3. Surface Agitation by Boiling; 4. Residue Entrainment (Resuspension). The sensitivity study evaluated mechanism 1 and 3 in the above list. Parameters varied were selected to be a reflection of a practical range of test conditions. The varied parameters included the boiling duration, fuel height, injected mass, particle size, turbulence intensity, and initial particle height. The boiling duration was the most significant parameter. The most significant mechanism was no.3, Surface Agitation by Boiling. This paper reports the implementation of the new multi-component evaporation model and its effect on the findings from the previous effort. The Mishima and Schwendiman test was re-modeled with the new evaporation model, and the results of the re-evaluation are presented. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Open Source Release of NJOY2016 and NJOY21

NJOY has been the standard for nuclear data processing for many decades. NJOY is a comprehensive computer code used to produce point-wise and multigroup nuclear data application libraries from cross sections and related quantities obtained from evaluated nuclear data in the Evaluated Nuclear Data Format (ENDF). NJOY was first publicly released in 1977 and distributed by what is now the Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory and the National Energy Software Center (NESC) at Argonne National Laboratory. From that time until the release of NJOY2012, NJOY has been distributed by RSICC and made available to researchers outside the United States by agreements between RSICC and the NEA Databank. NJOY2012 was distributed by the Feynman Center at Los Alamos National Laboratory which did not have agreements with the NEA Databank, thus making it more difficult for non US citizens to obtain copies of NJOY2012. Furthermore, NJOY has had export control restrictions preventing some researchers from obtaining NJOY at all. Two new versions of NJOY have been released, NJOY2016 and NJOY21, in January of 2017. Both NJOY2016 and NJOY21 have been released with no export control restrictions and are distributed with an open-source license. This is a big departure from previous releases and impacts not only who has access to NJOY, but also how updates are made available to users and how collaboration is facilitated among interested developers. In addition to distributing NJOY2016 and NJOY21 with an open-source license, these two new versions provide new capabilities for NJOY which will maintain NJOY as the standard for nuclear data processing into the foreseeable future. We report in this summary about the changes that come with these two new versions of NJOY and how this impacts the users and long-time contributors to NJOY.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Historical Savannah River Site Tritium Releases, Pathways, and Transport

† Releases of tritium from the production reactors were due almost entirely to releases of moderator, either as liquid or vapor from the reactor systems and from the heavy water rework facility. Small amounts could have been released from the reactor blanket gas system and from irradiated lithium-bearing control rods and targets stored underwater in the disassembly basins (Longtin et al. 1973; Jacober et al. 1973). ‡Only a part of the tritium released to the seepage and retention basins leave the site. Of the 3,015,000 Ci of tritium released to the basins, 27% (0.81M Ci) evaporated from the basin surfaces, 40% (1.2M Ci) migrated to outcrops and entered surface streams, and 33% (0.99M Ci) remains under the basins.

Chiswell, Steven R.↗

Investigation and Suppression of Oxygen Release by LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode under Overcharge Conditions

The safety issue of lithium-ion batteries is a crucial factor limiting their large-scale application. Therefore, it is of practical significance to evaluate the impact of their overcharge behavior because of the severe levels of oxygen release of cathode materials during this process. Here, by combining a variety of in situ techniques of spectroscopy and electron microscopy, this work studies the structural degradation of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) accompanying the oxygen release in the overcharge process. It is observed that a small amount of O 2 evolves from the initial surface at ≈4.7V. When charging to a higher voltage (≈5.5V), a large amount of O 2 evolves on the newly formed surface due to the occurrence of microcracks. Based on experimental results and theoretical calculations, it is determined that the oxygen release mainly occurs in the near-surface regions, where the remaining oxygen vacancies accumulate to create voids. To suppress the oxygen release, single-crystalline NCM811 with integrated structure is introduced and serves as a cathode, which can effectively inhibit morphology destruction and reduce the activation of lattice oxygen in the surface region. These findings provide a theoretical basis and effective strategy for improving the safety performance of Ni-rich cathode materials in practical applications.

25 ENERGY STORAGE↗

Photochemically-Driven CO 2 Release Using a Metastable-State Photoacid for Energy Efficient Direct Air Capture

One of the grand challenges underlying current direct air capture (DAC) technologies relates to the intensive energy cost for sorbent regeneration and CO 2 release, making the massive scale (GtCO 2 /year) deployment required to have a positive impact on climate change economically unfeasible. This challenge underscores the critical need to develop new DAC processes with substantially reduced regeneration energies. Here, in this work, we report a photochemically-driven approach for CO 2 release by exploiting the unique properties of an indazole metastable-state photoacid (mPAH). Our measurements on simulated and amino acid-based DAC systems revealed the potential of mPAH to be used for CO 2 release cycles by regulating pH changes and associated isomers driven by light. Upon irradiating with moderate intensity light, a ≈55 % and ≈68 % to ≈78 % conversion of total inorganic carbon to CO 2 was found for the simulated and amino acid-based DAC systems, respectively. Our results confirm the feasibility of on-demand CO 2 release under ambient conditions using light instead of heat, thereby providing an energy efficient pathway for the regeneration of DAC sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing an experimental approach for chemical explosive mode and heat release rate using DNS data

Obtaining information about burning characteristics and flame structures by analyzing experimental data is an important issue for understanding combustion processes and pursuing combustion modeling approaches. It has been shown that Raman/Rayleigh measurements of major species and temperature can be used to approximate the local heat release rate and the chemical explosive mode, and that these results are sufficiently accurate for a qualitative assessment of the relative importance of different heat release zones within the same overall flame structure in laminar and mildly turbulent partially premixed flames. The present study uses data from direct numerical simulation (DNS) to extend and quantify the understanding of the approximation method with respect to premixed and stratified-premixed flames with significant turbulence–chemistry interaction (high Karlovitz number). Here, the accuracy of the approximation procedure is assessed as previously applied, using just major species and temperature, as well as with the OH radical included as an additional experimentally accessible species. The accuracy of the local chemical explosive mode and the local heat release rate results from the approximation are significantly improved with OH included, yielding quantitative agreement with the DNS results. Further, a global sensitivity analysis is applied to identify the sensitivity of the heat release rate and chemical explosive mode to experimental uncertainties imprinted upon the DNS data prior to the approximation procedure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-stage heat release of multi-component fuels: Insights and implications for advanced engine operation

Multi-stage heat release (MSHR) is a unique phenomenon typically seen in lean/diluted and low- to intermediate-temperature combustion. Despite its relevance to advanced engine operation, the MSHR of multi-component fuels has barely been quantified. This study aims to characterize the MSHR of multi-component fuels in a rapid compression machine (RCM) at conditions representative of advanced combustion engines. New experimental data are first reported in the RCM at an equivalence ratio of 0.4, pressure of 60 bar and temperatures from 702 to 795 K for a research grade, multi-component gasoline surrogate, termed PACE-20. Here, experiments confirm the existence of MSHR for PACE-20 at all temperatures, and reveal the strong inhibiting effect of temperature on MSHR, where increasing temperature inhibits MSHR by suppressing first stage heat release and promoting second and third stage heat release. A detailed chemical kinetic model is also adopted to model the experiments, with good agreement observed. The response of MSHR characteristics to changes in different engine operating parameters (i.e., temperature, pressure, equivalence ratio and CO 2 dilution level) and fuel compositions (i.e., mole fraction of n-pentane, n-heptane, isooctane, cyclopentane, 1-hexene, ethanol and aromatics in PACE-20) is further evaluated via statistical analysis coupling quasi-random sampling, extensive computer experiments and high-dimensional model representation. The change in MSHR is characterized through 8 quantities of interest (QOIs), i.e., duration and extent of each heat release stage, and their standard deviations. The analysis highlights the dependence of the QOIs on the individual parameters as well as their interplays, with temperature exhibiting the strongest impact among all parameters. Furthermore, it is demonstrated that if MSHR is to be facilitated and combustion phasing is to be extended to enable engine operation at higher compression ratios, it is recommended to operate the engine at low intake temperatures, boosted intake pressures and high CO 2 dilutions (i.e., high EGR levels) with gasoline fuels containing more n-pentane and less aromatics.

42 ENGINEERING↗

Grain Boundary Percolation Modeling of Fission Gas Release in Oxide Fuels

We present a new approach to fission gas release modeling in oxide fuels based on grain boundary network percolation. The method accounts for variability in the bubble growth and coalescence rates on individual grain boundaries, and the resulting effect on macroscopic fission gas release. Two-dimensional representa- tions of fuel pellet microstructures are considered, and the resulting gas release rates are compared with traditional two-stage Booth models, which do not account for long-range percolation on grain boundary net- works. The results show that the requirement of percolation of saturated grain boundaries can considerably reduce the total gas release rates, particularly when gas resolution is considered.

36 MATERIALS SCIENCE↗

An effective numerical algorithm for intra-granular fission gas release during non-equilibrium trapping and resolution

Both fission gas release and gaseous swelling in nuclear fuel are driven by the transport of fission gas from within the fuel grains to grain boundaries (intra-granular fission gas release). The process involves gas atom diffusion in conjunction with trapping in and resolution from intra-granular bubbles, and is described mathematically by a system of two partial differential equations (PDE). Following Speight, under the assumption of equilibrium between trapping and resolution (quasi-stationary approximation) the system can be reduced to a single diffusion equation with an effective diffusion coefficient. Numerical solutions used in engineering fuel performance calculations invariably rely on this simplification. First, we investigate the validity of the quasi-stationary approximation compared to the solution of the general system of PDEs. Results demonstrate that the approximation is valid under most conditions of practical interest, but is inadequate to model intra-granular fission gas release during rapid transients to relatively high temperatures such as postulated reactivity initiated accidents (RIA). Then, we develop a novel numerical algorithm for the solution of the general problem in time-varying conditions. We verify the PolyPole-2 algorithm against a reference finite difference solution for a large number of randomly generated operation histories including prototypical RIA transients. Results demonstrate that PolyPole-2 captures the solution of the general PDE system with a high accuracy and a low computational cost. As a result, the PolyPole-2 algorithm overcomes the quasi-stationary approximation and the concept of an effective diffusion coefficient for the solution of the intra-granular fission gas release problem in nuclear fuel analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanistic calculation of the effective silver diffusion coefficient in polycrystalline silicon carbide: Application to silver release in AGR-1 TRISO particles

The silicon carbide (SiC) layer in tristructural isotropic (TRISO) fuel particles serves as a barrier to prevent the escape of fission products produced and not retained in the fuel kernel. The release of silver (Ag) is a concern due to the long half-life of the 110m Ag isotope. However, accurately determining the fission gas release rate requires knowing the diffusion coefficient through the SiC layer. In this study, we leverage atomistic calculations of Ag diffusivity in SiC bulk and grain boundaries (GBs) to develop a mesoscale effective Ag diffusion coefficient (D eff ) in SiC. Since GBs serve as pathways for Ag diffusion, D eff is defined as a function of temperature and microstructure variables. In particular, the size of SiC grains in the direction perpendicular to diffusion is shown to significantly affect Ag diffusion. The prediction of the mechanistic, mesoscale approach falls within one order of magnitude of empirical values. The temperature and microstructure-dependent effective Ag diffusivity in SiC is implemented in the fuel performance code Bison with a correction factor to predict Ag release from AGR-1 TRISO fuel particles. We hereby quantify the impact of SiC grain size on Ag release and improve Bison’s predictions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Swelling and Fission Gas Release of U-10Mo and U-17Mo Following Neutron Irradiation at 250 – 500°C

The performance of metallic fuel alloys, U-10Mo and U-17Mo, was examined using the MiniFuel test system in the High Flux Isotope Reactor. Approximately 0.8 mm thick disks were irradiated at target temperatures of 250°C, 350°C, 450°C, and 500°C up to three different fission densities, culminating at a maximum fission density of 6.8 × 10 20 cm −3 . Fission rates decayed from 3 – 6 × 10 13 cm −3 s −1 to 2 – 4 × 10 13 cm −3 s −1 over the course of the longest, eight cycle, irradiation as the 235 U was consumed and the 239 Pu concentration accumulated. Actual irradiation temperature on the last day of irradiation was measured via dilatometry using the SiC passive thermometry recovered from the MiniFuel subcapsules and compared favorably with the thermal calculations using as-built geometry and test conditions. Furthermore, average simulated temperatures were within 50°C of the target temperatures, except for the 500°C irradiation, for which the temperature variation was 62°C, 32°C, and 90°C in the in two, four, and eight cycle irradiations, respectively. Fission gas release (FGR) measurements showed no release above recoil for any U-17Mo fuels or for the U-10Mo fuel irradiated at 250°C. Finally, significant (40%–80%) FGR was found for the medium- to highest-burnup U-10Mo samples irradiated at target temperatures 350°C–500°C. Significant FGR correlated with sample thickness swelling, which was as high as 13%–35% for high-release samples and below 7% for all other (low–gas release) samples.

FGR↗

Evaluating transient fission gas release in high burnup light water reactor fuel during loss of coolant accident conditions via new capabilities

In this work, the role of transient fission gas release (tFGR) in the cladding burst behavior of high burnup fuel during a loss-of-coolant accident (LOCA) in commercial light water reactors was further investigated via the use of a new apparatus. During the LOCA-related temperature ramps of high burnup fuel, the release of fission gases exceeds the steady-state release observed under normal operating conditions. An enhancement was made to the Oak Ridge National Laboratory Severe Accident Test Station (SATS) to probe the various factors influencing tFGR. Experiments were performed on commercially irradiated, zirconium-clad uranium dioxide fuel, and this paper details the design of the experimental setup, the initial test results, and the subsequent post-test analyses. Notably, the first test on high burnup fuel demonstrated a LOCA-relevant tFGR of 5.3% from an unpressurized fuel segment. The ultimate tFGR was 10.7% for beyond LOCA conditions. A follow-up test on similar fuel revealed a tFGR of 12.6% under comparable conditions. Microstructural analysis and an analysis of the released gas provide some insight regarding the source of tFGR in the fuel. Finally, a grain boundary bubble model may aid in the interpretation of the results and offer a guide for future work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Templated Mesoporous Silica Outer Shell for Controlled Silver Release of a Magnetically Recoverable and Reusable Nanocomposite for Water Disinfection

Here, we encapsulated Fe 3 O 4 @SiO 2 @Ag (MS-Ag), a bifunctional magnetic silver core–shell structure, with an outer mesoporous silica (mS) shell to form an Fe 3 O 4 @SiO 2 @ 2 Ag@mSiO 2 (MS-Ag-mS) nanocomposite using a cationic CTAB (cetyltrimethylammonium bromide) micelle templating strategy. The mS shell acts as protection to slow down the oxidation and detachment of the AgNPs and incorporates channels to control the release of antimicrobial Ag + ions. Results of TEM, STEM, HRSEM, EDS, BET, and FTIR showed the successful formation of the mS shells on MS-Ag aggregates 50–400 nm in size with highly uniform pores ~4 nm in diameter that were separated by silica walls ~2 nm thick. Additionally, the mS shell thickness was tuned to demonstrate controlled Ag + release; an increase in shell thickness resulted in an increased path length required for Ag + ions to travel out of the shell, reducing MS-Ag-mS’ ability to inhibit E. coli growth as illustrated by the inhibition zone results. Through a shaking test, the MS-Ag-mS nanocomposite was shown to eradicate 99.99+% of a suspension of E. coli at 1 × 10 6 CFU/mL with a silver release of less than 0.1 ppb, well under the EPA recommendation of 0.1 ppm. This high biocidal efficiency with minimal silver leach is ascribed to the nanocomposite’s mS shell surface characteristics, including having hydroxyl groups and possessing a high degree of structural periodicity at the nanoscale or “smoothness” that encourages association with bacteria and retains high Ag + concentration on its surface and in its close proximity. Furthermore, the nanocomposite demonstrated consistent antimicrobial performance and silver release levels over multiple repeated uses (after being recovered magnetically because of the oxidation-resistant silica-coated magnetic Fe 3 O 4 core). It also proved effective at killing all microbes from Long Island Sound surface water. The described MS-Ag-mS nanocomposite is highly synergistic, easy to prepare, and readily recoverable and reusable and offers structural tunability affecting the bioavailability of Ag + , making it excellent for water disinfection that will find wide applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Linear Free Energy Correlations for Fission Product Release from the Fukushima-Daiichi Nuclear Accident

This paper extends the preliminary linear free energy correlations for radionuclide release performed by Schwantes, et al., following the Fukushima-Daiichi Nuclear Power Plant accident. Through evaluations of the molar fractionations of radionuclides deposited in the soil relative to modeled radionuclide inventories, we confirm the source of the radionuclides to be from active reactors rather than the spent fuel pool. Linear correlations of the form ln χ = -α (ΔG rxn °(T C ))/(RT C )+β were obtained between the deposited concentration and the reduction potential of the fission product oxide species using multiple reduction schemes to calculate ΔG° rxn (T C ). These models allowed an estimate of the upper bound for the reactor temperatures of T C between 2130 K and 2220 K, providing insight into the limiting factors to vaporization and release of fission products during the reactor accident. Estimates of the release of medium-lived fission products 90 Sr, 121m Sn, 147 Pm, 144 Ce, 152 Eu, 154 Eu, 155 Eu, 151 Sm through atmospheric venting and releases during the first month following the accident were performed, and indicate large quantities of 90 Sr and radioactive lanthanides were likely to remain in the damaged reactor cores.

environmental release↗

Exceptionally tight membrane-binding may explain the key role of the synaptotagmin-7 C 2 A domain in asynchronous neurotransmitter release

Synaptotagmins (Syts) act as Ca 2+ sensors in neurotransmitter release by virtue of Ca 2+ -binding to their two C 2 domains, but their mechanisms of action remain unclear. Puzzlingly, Ca 2+ -binding to the C 2 B domain appears to dominate Syt1 function in synchronous release, whereas Ca 2+ -binding to the C 2 A domain mediates Syt7 function in asynchronous release. Here we show that crystal structures of the Syt7 C 2 A domain and C 2 AB region, and analyses of intrinsic Ca 2+ -binding to the Syt7 C2 domains using isothermal titration calorimetry, did not reveal major differences that could explain functional differentiation between Syt7 and Syt1. However, using liposome titrations under Ca 2+ saturating conditions, we show that the Syt7 C 2 A domain has a very high membrane affinity and dominates phospholipid binding to Syt7 in the presence or absence of l -α-phosphatidylinositol 4,5-diphosphate (PIP 2 ). For Syt1, the two Ca 2+ -saturated C 2 domains have similar affinities for membranes lacking PIP 2 , but the C 2 B domain dominates binding to PIP 2 -containing membranes. Mutagenesis revealed that the dramatic differences in membrane affinity between the Syt1 and Syt7 C 2 A domains arise in part from apparently conservative residue substitutions, showing how striking biochemical and functional differences can result from the cumulative effects of subtle residue substitutions. Viewed together, our results suggest that membrane affinity may be a key determinant of the functions of Syt C 2 domains in neurotransmitter release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗