SEARCH · Engineering Papers

Results for “Powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Neutron diffraction and DFT studies of oxygen defect and transport in higher-order Ruddlesden–Popper phase materials

A series of higher-order Ruddlesden–Popper phase materials – La 3 PrNi 3 O 10-δ , La 2 Pr 2 Ni 3 O 10-δ and LaPr 3 Ni 3 O 10-δ – were synthesised and investigated by neutron powder diffraction to understand the oxygen defect structure and propose possible pathways for oxygen transport in these materials. Further complimentary DFT calculations of the materials were performed to support the experimental analysis. All of the phases were hypostoichiometric and it was observed that the majority of the oxygen vacancies were confined to the perovskite layers, with a preference for equatorial oxygen sites. A particular preference for vacancies in O(1) and O(5) sites at high temperatures was observed from neutron diffraction measurements which were further complimented by DFT calculations wherein the vacancy formation energy was found to be lowest at the O(1) site. Also, a preference for a curved oxygen transport pathway around the NiO 6 octahedra was observed which agrees with the published literature for Ruddlesden–Popper phase materials. Lattice parameters for all three compositions showed a linear increase with increasing temperature, but the increase was greatest in the c parameter while the b parameter showed only a slight increase when compared to the a parameter. The thermal expansion coefficient was calculated for all compositions and was found to be in the range 13.0–13.4 × 10 -6 °C -1 , which is compatible with the commonly used electrolyte materials for solid oxide fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Characterization of Oxygen Storage and Structural Properties of Oxygen-Loaded Hexagonal R MnO 3+δ ( R = Ho, Er, and Y)

Single-phase polycrystalline samples of stoichiometric RMnO3+delta (R = Er, Y, and Ho) were achieved in the hexagonal P6(3)cm structure through solid state reaction at, similar to 1300 degrees C. Thermogravimetric measurements in oxygen atmospheres demonstrated that samples with the larger Ho and Y show rapid and reversible incorporation of large amounts of excess oxygen (0.3 > delta> 0) at an unusually low temperature range of similar to 190-325 degrees C, indicating the industrial usefulness of RMnO3+delta materials for lower cost thermal swing adsorption processes for oxygen separation from air. Further increase of the excess oxygen intake to delta similar to 0.38 was achieved for all the investigated materials when annealed under high pressures of oxygen. The formation of three oxygen stable phases with 6 = 0, 0.28, and 0.38 was confirmed by thermogravimetric measurements, synchrotron X-rays, and neutron diffraction. In situ synchrotron diffraction proved the thermal stability of these single phases and the regions of their creation and coexistence, and demonstrated that the stability of the delta = 0.28 phase increases with the ionic size of the R ion. Structural modeling using neutron powder diffraction for oxygen excess phases describes the formation and details of a large R3c superstructure observed for HoMnO3.28 by tripling the c-axis of the original parent unit cell. Modeling of the RMnO3.38 (R = Y and Er) oxygen-loaded phase converged on a structural model consistent with the symmetry of Pca2(1).

Abughayada, C.↗

DOE OSTI2014

Photocatalytic degradation of diethyl phthalate using TiO{sub 2} nanoparticles

TiO{sub 2} nanoparticles predominantly in rutile phase are synthesized by ultrasonication assisted sol-gel method. TiO{sub 2} powder is characterized using X-ray powder diffraction and UV-vis diffuse reflectance. TiO{sub 2} is used as catalyst in photocatalytic degradation of Diethyl Phthalate. TiO{sub 2} exhibits good photocatalytic activity for the degradation of diethyl phthalate.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2018

First Full Structural Characterization of Chloro Formamidinium Salts

While the synthesis of chloro formamidinium chloride has been known for over one century, no solid‐state structure of a chlorine‐substituted formamidinium compound has been reported up to now. Herein, we describe syntheses, solid‐state structures, and vibrational properties of four chloro formamidinium compounds, namely [ClC(NH 2 ) 2 ]Cl ( 1 ), [ClC(NH 2 ) 2 ](AuCl 4 ) ( 2 ), [ClC(NH 2 ) 2 ] 2 (PdCl 4 ) ( 3 ), and [ClC(NH 2 ) 2 ] 2 (PtCl 6 ) ( 4 ), as determined by single‐crystal X‐ray diffraction (SCXRD). 1 and 3 crystallize in the monoclinic space group P 2 1 / c , 2 in the orthorhombic space group Pbcn , whereas 4 adopts the triclinic space group P 1 . By using a combination of high‐resolution time‐of‐flight neutron powder diffraction, state‐of‐the‐art DFT calculations as well as IR spectroscopy, the prior SCXRD result was fully confirmed and augmented by determining the hydrogen‐bonded molecular networks. First‐principles electronic‐structure calculations corroborate the ionic nature of these salts by showing very flat, molecular‐like bands next to the Fermi level, in addition to indirect bandgaps. This study underlines the upmost importance of complementing diffraction data by ab initio calculations, as theory‐derived anisotropic displacement parameters served as fixed numerical entries.

Möller, Andreas↗

DOE OSTI2013

A neutron diffraction study and mode analysis of compounds of the system La{sub 1−x}Sr{sub x}FeO{sub 3−x}F{sub x} (x=1, 0.8, 0.5, 0.2) and an investigation of their magnetic properties

We report here a detailed study of the system La{sub 1−x}Sr{sub x}FeO{sub 3−x}F{sub x}, by neutron powder diffraction- and magnetic-measurements. All the compounds are robust antiferromagnetics with ordering temperatures well above room temperature. Magnetic moments are shown to align parallel to the c-axis. FC-ZFC measurements indicate a small canting of the magnetic moments, resulting in a ferromagnetic component with a maximum for La{sub 0.5}Sr{sub 0.5}FeO{sub 2.5}F{sub 0.5}. We show that the system exhibits a composition-driven transition from a phase, for low fluorination levels (x≤0.5), with Pnma symmetry and the usual system of octahedral tiltings, to a phase with space group Imma for higher fluorine contents, where a correlated distortion of the oxygen octahedra plays a significant role. The consistency of the structural models, with respect to the expected continuity of the amplitudes of the different distortion modes and the invariance of their internal form, was monitored through the symmetry mode decomposition of the structures. - Graphical abstract: The crystal and magnetic structure of La{sub 0.5}Sr{sub 0.5}FeO{sub 2.5}F{sub 0.5}. Display Omitted - Highlights: • The compounds La{sub 1−x}Sr{sub x}FeO{sub 3−x}F{sub x} (x=1, 0.8, 0.5, 0.2) were studied by neutron diffraction. • A mode analysis shows lower symmetry for Sr rich compounds than previously reported. • SrFeO{sub 2}F crystallizes in the orthorhombic space group Imma. • Magnetic moments resulting from canting depend on metric distortion. • The magnetic structure was determined for La{sub 0.5}Sr{sub 0.5}FeO{sub 2.5}F{sub 0.5}.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Crystal structure details of La- and Bi-substituted hydroxyapatites: Evidence for LaO{sup +} and BiO{sup +} with a very short metal–oxygen bond

Crystal structures of substituted apatites with general formula Ca{sub 10−x}M{sub x}(PO{sub 4}){sub 6}(OH{sub 1−δ}){sub 2−x}O{sub x}, where M=La, Bi, 0≤x<2, were refined using high-resolution X-ray powder diffraction patterns. Individual positions for Ca{sup 2+} and M{sup 3+}-ions localized near Ca2-site were determined. The M{sup 3+}-ion was found shifted toward the hexagonal channel center with respect to the Ca{sup 2+}-ion, forming very short bond with the intrachannel O{sup 2−}, while leaving considerably longer distances to other oxygen atoms, which suggested the existence of a MO{sup +} ion. Distinct bands of stretching M–O modes were observed in the Raman and FT-IR spectra of the compounds. The bond lengths for BiO{sup +} and LaO{sup +} were estimated to be 2.05(1) and 2.09(1) Å correspondingly. The latter was almost 0.3 Å lower than the shortest La–O bond in La{sub 2}O{sub 3}. The realization of such a strong lanthanide–oxygen bond in a crystal lattice could provide a very high axial ligand field and might be implemented to develop high-energy-barrier single-molecule magnets as well as to tune properties of lanthanide-based luminophores. - Graphical abstract: A fragment of the La-for-Ca substituted apatite crystal structure focusing on the La–O bond. - Highlights: • Individual positions in the apatite crystal lattice for a doping atom (La, Bi) and Ca. • The doping atom shifts toward the center of the hexagonal channel. • BiO{sup +} and LaO{sup +} with estimated short bond lengths of 2.05 and 2.09 Å respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Investigation of structural and electrical transport properties in Ti doped Sr{sub 2}IrO{sub 4}

Effects of Ti substitution at Ir-site on structural and electrical properties are studies in Sr{sub 2}IrO{sub 4}. Structural investigation has been done using x-ray powder diffraction and allied Rietveld analysis for all the samples. While there is no structural phase transition but the lattice parameters evolve with Ti doping. Resistivity measurements show an insulating behavior for all the samples. Data show resistivity increases drastically with Ti doping. The increase in resistivity is understood to arise due to dilution of Ir-O-Ir network as well as tuning of electronic correlation effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2016

Temperature induced phase transition of CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3} phosphate

In this work we investigated the structural behaviour of a CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3}. Due to the presence of divalent Mn{sup 2+} cations this compound can possess interesting luminescence properties. It was recently understood that this phosphate undergoes a temperature induced irreversible phase transition in the range of 800–875 °C. It has also been shown that the 3d–3d luminescence of Mn{sup 2+} increases 10 fold for the high temperature polymorph. To determine the Mn environment structural investigations of both phases have been performed by the X-ray powder diffraction and Raman spectroscopy methods. The low temperature modification adopts the trigonal NZP structure type with a slightly lower symmetry (space group R32, a=8.7850(2) Å, c=22.6496(7) Å, V=1514.8(1) Å{sup 3}). The high temperature form in turn has orthorhombic symmetry (space group Pnma, a=6.2350(3) Å, b=6.6281(3) Å, c=14.4731(6) Å, V=598.13(5) Å{sup 3}). Both structures were solved ab-initio from powder data and structural analysis was performed. In-situ and RT Raman spectra are consistent with the XRD derived structural model. Mn{sup 2+} cations occupy different types of positions in these structures and a change in Mn coordination number (6 for LT phase, 7 for HT phase) results in different Mn–O bond lengths. These differences may explain the change in the optical properties between the polymorphs. - Graphical abstract: The compound CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3} was synthesized in order to create a material with enhanced luminescent properties. The goal of present studies is to define Mn{sup 2+} environment and its changes due to the structural transformations of the phosphate along phase transition at the T range of 800–875 °C. It was found that LT modification adopts the trigonal NZP structure type, sp.gr. R32, the HT form in turn exhibits orthorhombic symmetry sp.gr. Pnma. Mn2+ cations occupy different types of positions in those structures and a change in coordination number of Mn (6 for LT phase, 7 for HT phase) results in a change in Mn–O bond lengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2014

Solid-state reaction preparation and photoluminescence properties of Na{sub 2}Ba{sub 6}(Si{sub 2}O{sub 7})(SiO{sub 4}){sub 2}:Eu{sup 2+} phosphors

Graphical abstract: - Highlights: • Green-emitting phosphor powder Na{sub 2}Ba{sub 6}(Si{sub 2}O{sub 7})(SiO{sub 4}){sub 2}:Eu{sup 2+} was synthesized. • Two different emission centers occupied by Eu{sup 2+} were investigated. • The concentration quenching mechanism was studied. - Abstract: A kind of novel green-emitting phosphor Na{sub 2}Ba{sub 6}(Si{sub 2}O{sub 7})(SiO{sub 4}){sub 2}:Eu{sup 2+} was synthesized by a solid-state reaction. The phase formation of as-prepared sample was investigated by X-ray powder diffraction. The photoluminescence emission (PL) and excitation (PLE) spectra results indicated that the phosphor could be efficiently excited by ultraviolet (UV) light from 240 to 400 nm, and presented a broad green emission band with two-band profile suggesting two different emission centers occupied by Eu{sup 2+}. The critical quenching concentration of Eu{sup 2+} was determined to be 0.01 mol and the concentration quenching mechanism was also investigated.

36 MATERIALS SCIENCE↗

DOE OSTI2016

Solvent-mediated secondary building units (SBUs) diversification in a series of Mn{sup II}-based metal-organic frameworks (MOFs)

The role of auxiliary solvents in the formation of MOFs has been investigated for a series of Mn{sup II}-based framework systems. Reactions of 4,4′,4″-nitrilotribenzoic acid (H{sub 3}L) with Mn{sup II} through varying auxiliary solvents of the medium resulted in the formation of diversified multinuclear Mn{sup II} subunits in four new coordination polymers: [Mn{sub 3}(L)(HCOO){sub 3}(DEF){sub 3}] (1), [Mn{sub 3}(L){sub 2}(EtOH){sub 2}]·DMF (2), [Mn{sub 5}(L){sub 4}(H{sub 2}O){sub 2}]·2(H{sub 2}NMe{sub 2}){sup +}·4DMF·2H{sub 2}O (3), and [Mn{sub 3}(L){sub 2}(py){sub 4}(H{sub 2}O)]·H{sub 2}O (4) (H{sub 3}L=4,4′,4′-nitrilotribenzoic acid, DMF=dimethylformamide, DEF=N,N-diethylformamide, py=pyridine). These four compounds were fully characterized by single-crystal X-ray diffraction, showing interesting SBUs variations. For compound 1, it displays a (3,6)-connected kgd net with wheel [Mn{sub 6}] cluster serving as SBU, whereas in 2, the sequence of Mn{sub 3}(COO){sub 9}(EtOH){sub 2} is repeated by inversion centers located between Mn1 and Mn3 to form an infinite Mn-carboxylate chain, which are further interlinked by L{sup 3−} ligands to form a 3D architecture. In 3, the pentanuclear Mn{sub 5}(CO{sub 2}){sub 12} clusters are interlinked to form a layer, which are further pillared by L{sup 3−} to generate a 3D network. Compound 4 has a (3,6)-connected network in which the SBU is a linear trimeric Mn{sub 3}(COO){sub 6}(py){sub 4}(H{sub 2}O) cluster. In addition, the thermal stabilities, X-ray powder diffraction of all the compounds were studied, photoluminescence behaviors of compounds 1, 3 and 4 are discussed. - Graphical abstract: Supramolecular assembly of C{sub 3}-symmetric ligand 4,4′,4″-nitrilotribenzoic acid (H{sub 3}L) with Mn{sup II} through varying auxiliary solvents of the medium resulted in the formation of diversified multinuclear Mn{sup II} subunits in four new coordination polymers. The results exhibit the structures of Mn-SBUs in these MOFs largely depend on the ancillary solvents involved in the reactions. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Raman spectra and structural properties of hexagonal Yb{sub 1-x}Dy{sub x}MnO{sub 3} (x = 0, 0.05 and 0.1)

Single phase Yb{sub 1-x}Dy{sub x}MnO{sub 3} (x= 0, 0.05 and 0.1) samples are prepared by a solid state reaction method. X-ray powder diffraction shows that all samples crystallize in the hexagonal phase with P6{sub 3}cm space group. The structural analysis shows there is increase in lattice parameter c and cell volume of the hexagonal unit cell with Dy substitution and the average bond length between Mn-O increases. Raman spectra show that the phonon peaks of Yb{sub 1-x}Dy{sub x}MnO{sub 3} slightly shift to lower frequencies with doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2014

Reverse Monte Carlo modeling in confined systems

An extension of the well established Reverse Monte Carlo (RMC) method for modeling systems under close confinement has been developed. The method overcomes limitations induced by close confinement in systems such as fluids adsorbed in microporous materials. As a test of the method, we investigate a model system of {sup 36}Ar adsorbed into two zeolites with significantly different pore sizes: Silicalite-I (a pure silica form of ZSM-5 zeolite, characterized by relatively narrow channels forming a 3D network) at partial and full loadings and siliceous Faujasite (which exhibits relatively wide channels and large cavities). The model systems are simulated using grand canonical Monte Carlo and, in each case, its structure factor is used as input for the proposed method, which shows a rapid convergence and yields an adsorbate microscopic structure in good agreement with that of the model system, even to the level of three body correlations, when these are induced by the confining media. The application to experimental systems is straightforward incorporating factors such as the experimental resolution and appropriate q-sampling, along the lines of previous experiences of RMC modeling of powder diffraction data including Bragg and diffuse scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2018

A New Ti{sub 9}O{sub 10} Nanophase Prepared by Heat-Treating Nonstoichiometric Milled TiO{sub y} Nanopowder

A Ti{sub 9}O{sub 10} nanophase (sp. gr. Immm) has been synthesized via high-energy milling followed by prolonged high-temperature vacuum heat treatment of nonstoichiometric TiO{sub y} titanium monoxide. The atomic structure and microstructure of Ti{sub 9}O{sub 10} have been investigated by X-ray powder diffraction and high-resolution transmission electron microscopy. According to quantum-chemical calculation results, macrocrystalline Ti{sub 9}O{sub 10} is less energetically favorable than a disordered cubic phase of the same composition, TiO{sub 10/9}, so the formation of the former phase is due to size effects.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2026

Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets

We investigate La-site substitution in the high-entropy garnet Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 (LLZNTH) using Ba2+, Sr2+, and Sm3+ to elucidate how dopant governs phase stability, Li-site distribution, and electrochemical behavior. X-ray diffraction shows that Sr2+ is incorporated homogeneously into the garnet lattice, whereas the larger Ba2+ and smaller Sm3+ ions partially exceed the structural tolerance, generating secondary phases. Nevertheless, the Sm-doped composition (x = 0.05) exhibits the highest room-temperature ionic conductivity (2.7 × 10–4 S cm–1). Neutron powder diffraction reveals that Sm substitution drives a redistribution of Li+ from the tetrahedral 24 d sites into the higher-mobility 96 h positions, enhancing the connectivity of the three-dimensional Li-ion migration network. A Sm-doping series (x = 0.01–0.05) further shows that only sufficiently high Sm levels induce this redistribution, whereas lower concentrations retain Li arrangements similar to the undoped garnet. Critical current density measurements demonstrate that La-site dopants also influence interfacial stability against Li metal, underscoring a trade-off between bulk transport enhancement and mechanical robustness. Collectively, these findings reveal that in high-entropy garnets improved ionic conductivity can originate not only from phase-pure structures but also from targeted modification of the Li sublattice, even when accompanied by secondary phases, offering a compositional design principle for garnet electrolytes.

Li, Chang [Mechanical Engineering, School of Scien↗

DOE OSTI2013

A novel solvethermal method for the preparation of magnetic monodisperse Fe{sub 3}O{sub 4} nanoparticles II: High-surface-activity ferrihydrite used as precursor

Graphical abstract: The magnetic monodisperse Fe{sub 3}O{sub 4} nanoparticles (NPs) were prepared by novel solvethemal method at moderate temperature using high surface active ferrihydrit and iron powder as precursors in orgnic solvent. - Highlights: • Facile synthesis of organic ligands-coated monodisperse Fe{sub 3}O{sub 4} nanoparticles at low temperature. • Low-cost high surface active ferrihydrit and reductive iron powder were used as precursors. • N{sub 2}-free reaction environment. • Organic ligands act as reductive. - Abstract: Magnetic monodisperse Fe{sub 3}O{sub 4} nanoparticles (NPs) were prepared from ferrihydrite and iron powder by a novel solvethermal method at moderate temperatures in aqueous and organic solvent media. The effects of temperature and solvent medium on the phase and particle size of Fe{sub 3}O{sub 4} NPs were investigated. The products were characterized by X-ray powder diffraction, infrared spectroscopy, differential scanning calorimetry–thermogravimetric analysis, transmission electron microscopy, and vibrating sample magnetometry. At 120 °C in the organic medium, uniform organic-ligand-coated superparamagnetic Fe{sub 3}O{sub 4} NPs were produced; the particle size increased with the temperature, and the calculated mean particle size was 8.9 nm. At 180 °C in the aqueous medium, pure-phase Fe{sub 3}O{sub 4} was obtained. Thus, the organic solvent did not only serve as a solvent but also participated in the reaction. Fe{sub 3}O{sub 4} production in the aqueous and organic solvent media had different mechanisms.

36 MATERIALS SCIENCE↗

DOE OSTI2021

When x-rays alter the course of your experiments

The continuing increase in the brilliance of synchrotron radiation beamlines allows for many new and exciting experiments that were impossible before the present generation of synchrotron radiation sources came on line. However, the exposure to such intense beams also tests the limits of what samples can endure. Whilst the effects of radiation induced damage in a static experiment often can easily be recognized by changes in the diffraction or spectroscopy curves, the influence of radiation on chemical or physical processes, where one expects curves to change, is less often recognized and can be misinterpreted as a 'real' result instead of as a 'radiation influenced result'. This is especially a concern in time-resolved materials science experiments using techniques as powder diffraction, small angle scattering and x-ray absorption spectroscopy. In this work, the effects of radiation (5–50 keV) on some time-resolved processes in different types of materials and in different physical states are discussed. We show that such effects are not limited to soft matter and biology but rather can be found across the whole spectrum of materials research, over a large range of radiation doses and is not limited to very high brilliance beamlines.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2016

Rietveld refinement and dielectric studies of Bi{sub 0.8}Ba{sub 0.2}FeO{sub 3} ceramic

Polycrystalline Bi{sub 0.8}Ba{sub 0.2}FeO{sub 3} ceramic has been synthesized via conventional solid state reaction technique. The Rietveld refinement of x-ray powder diffraction revealed that the sample has a rhombohedral crystal structure (space group R3c). With increase in temperature, the values of dielectric constant (ϵ′) and dielectric loss (tan δ) are found to be increase at different frequencies which may be the result of increase in the number of charge carriers and their mobilities due to the thermal activation. Further the ac conductivity data is analyzed by using Jonscher’s universal power law. The values of frequency exponent ‘s’ lies in the range 0.2 ≤ s ≤ 0.7 and decreases with increase in temperature which can be explained on the basis of CBH (Correlated Barrier Height) model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Prediction and Measurement of the Kinetics of Isothermal Crystallization and Devitrification of Mold Powder Slags

The rate and extent of formation of crystalline phases in the slag film that develops between the mold and the strand in steel continuous casting determine heat transfer and lubrication between them and therefore play crucial roles in shell integrity. In this work, a commercial mold powder for casting medium carbon (MC) thin steel slabs is selected for carrying out detailed comparisons between predicted and experimental results of the rates of isothermal crystallization and devitrification of liquid and glassy slag, respectively. Predictions are obtained with a kinetic model that combines the induction period (of Šimon and Kolman) and the Kissinger methods to evaluate time–temperature–transformation (TTT) diagrams for the devitrification and crystallization reactions associated with the peaks appearing in non-isothermal thermo-analysis traces. To obtain experimental validation of the diagram, a high-temperature confocal laser scanning microscope (HT-CLSM) is used to rapidly heat or cool a sample, ~ 140 mg, of glassy powder or liquid slag, respectively, to selected isothermal conditions, where it is held for a prescribed length of time before quenching. Identification and quantification of the phases present in the quenched samples are done by a quantitative X-ray powder diffraction analysis (QXRPDA) method that uses a PONKCS (partial or not known crystal structure) procedure based on Le Bail and Rietveld strategies for refinement of diffraction patterns. The many experimental results indicate that the predicted TTT diagrams for devitrification and crystallization of the mold slag give a good estimation of the rate of the transformations that take place at different temperatures and reveal the differences in the reactions that occur along both paths.

36 MATERIALS SCIENCE↗