Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

Understanding and Controlling Conductivity Transitions in Correlated Solids: Spectroscopic Studies of Electronic Structure in Vanadates (Final Report)

This research project is focused on synchrotron radiation based x-ray spectroscopic studies of the metal to insulator transition in vanadium oxides. In doing so, we developed a fundamental understanding of the origins of conductivity transitions in correlated electron materials. Conductivity transitions can be driven by external and internal mechanisms, including electric and magnetic fields, chemical doping, defects, disorder, pressure, dimensionality, and temperature. Vanadium oxides, and vanadium dioxide in particular, display particularly complex electronic phenomena. Binary vanadium oxides, and ternary oxides with substituted metal cations, exhibit a broad range of complex conductivity transitions, as well as charge ordering transitions, structural phase transitions, frustrated spin structures, superconductivity, and unusual magnetic properties. As such, vanadates are a prototypical class of correlated material, where fundamentally important physical themes can be explored, both experimentally and theoretically. The experimental tools used were soft x-ray emission spectroscopy (XES), soft x-ray absorption spectroscopy (XAS), resonant inelastic soft x ray scattering (RIXS), x-ray photoemission spectroscopy (XPS), angle resolved photoemission spectroscopy (ARPES), and spectroscopic photoemission low energy electron microscopy (SPELEEM). This broad range of techniques delivered data that was used to understand the electronic structure in these oxides. Vanadium oxides as single crystals, thin films, polycrystalline powders, and nanoparticles were studied to determine the influence of the physical structure the materials properties. A rich and varied selection of experiments were performed, and by combining the information gathered by our x-ray spectroscopic techniques, we developed a comprehensive understanding of electronic structure in vanadium oxides. We measured band structures and Fermi surfaces, studied the coupling between collective excitations and quasi-particles, measured the local, site and element specific electronic structure, as well as the cation charge state, measured orbital hybridization, and measured element specific low energy valence excitations such as dd* and charge transfer excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Gd substitution on the structure and magnetic properties of YFeO{sub 3} ceramics

High quality Gd-doped YFeO{sub 3} polycrystalline samples were synthesized by solid-state reaction method. The crystal structure of the samples can be described by the space group of Pbnm (No. 62). {sup 57}Fe Moessbauer spectra show that only the high spin Fe{sup 3+} exists and the samples are magnetic ordering at room temperature. The spontaneous magnetization at room temperature was observed and the paramagnetic contribution from Gd{sup 3+} ions was confirmed by the significant enhancement of the magnetization. Temperature-dependent magnetization data correlate with the Gd concentration x and follow the Curie-Weiss law above the ferromagnetic transition temperature. Magnetic measurements suggest that the substitution of Y{sup 3+} ions by Gd{sup 3+} ions effectively enhance the magnetization of YFeO{sub 3}. This is achieved by the additional Gd-Gd interactions, Gd-Fe interactions and the variation of Fe-O-Fe superexchange bond caused by distortion of the crystal structure. - Graphical abstract: The crystallographic structure of YFeO{sub 3} and the magnetic hysteresis loops of Y{sub 1-x}Gd{sub x}FeO{sub 3} (x=0, 0.1, 0.5, and 1) samples at room temperature. Highlights: Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) ceramics were synthesized by solid state reaction method. Black-Right-Pointing-Pointer Y{sub 1-x}Gd{sub x}FeO{sub 3} (0{<=}x{<=}1) samples are ferromagnetic ordering at room temperature. Black-Right-Pointing-Pointer Results of {sup 57}Fe Moessbauer spectra are typical for Fe{sup 3+} high spin state. Black-Right-Pointing-Pointer Substitution of Y{sup 3+} ions by Gd{sup 3+} ions enhances the magnetization of YFeO{sub 3} obviously.

36 MATERIALS SCIENCE↗

A complete grain-level assessment of the stress-strain evolution and associated deformation response in polycrystalline alloys

Polycrystalline alloys are used pervasively across structural applications contingent upon extensive experimental testing. A statistically representative number of tests are required to expose the variability in the material's performance, as a result of non-uniform microstructures and associated micromechanical fields. In a more direct means of capturing this pertinent information, multi-modal experimental techniques are presented to measure and track the complete micromechanical state, evolving during loading, of each and every grain within the regions of interest. Specifically, a combination of high-energy X-ray diffraction microscopy and digital image correlation coupled with electron backscatter diffraction are conducted on a specimen for each of the alloys, Haynes 282 and Ti7Al. The results of the multi-modal analysis definitively demonstrate that the degree of heterogeneity increases with deformation level and is used to assess the number of grains necessary for a representative volume element description of the stress state for each of these materials. Moreover, higher resolution imaging is used for identification of the slip system activity and subsequently used to study slip transmission events. An accurate knowledge of the resolved shear stress in adjacent grains (grain interactions) is demonstrated to be a key descriptor of the slip transmission events.

36 MATERIALS SCIENCE↗

Intermediate-temperature Polymorphic Phase Transition in KH2PO4: A Synchrotron X-ray Diffraction Study

We have used synchrotron X-ray diffraction to investigate the structural and chemical changes undergone by polycrystalline KH{sub 2}PO{sub 4} (KDP) upon heating within the 30-250 C temperature interval. Our data show evidence of a polymorphic transition at T {approx} 190 C from the room-temperature tetragonal KDP phase to a new intermediate-temperature monoclinic KDP modification (spacegroup P2{sub 1}/m and lattice parameters a = 7.590, b = 6.209, c = 4.530 {angstrom}, and {beta} = 107.36{sup o}). The monoclinic RDP polymorph remains stable upon further heating to 235 C, and is isomorphic to its RbH{sub 2}PO{sub 4} and CsH{sub 2}PO{sub 4} counterparts.

36 MATERIALS SCIENCE↗

Solution precursor plasma deposition of nanostructured ZnO coatings

Highlights: {yields} The solution precursor route employed is an inexpensive process with capability to produce large scale coatings at fast rates on mass scale production. {yields} It is highly capable of developing tailorable nanostructures. {yields} This technique can be employed to spray the coatings on any kind of substrates including polymers. {yields} The ZnO coatings developed via solution precursor plasma spray process have good electrical conductivity and reflectivity properties in spite of possessing large amount of particulate boundaries, porosity and nanostructured grains. -- Abstract: Zinc oxide (ZnO) is a wide band gap semiconducting material that has various applications including optical, electronic, biomedical and corrosion protection. It is usually synthesized via processing routes, such as vapor deposition techniques, sol-gel, spray pyrolysis and thermal spray of pre-synthesized ZnO powders. Cheaper and faster synthesis techniques are of technological importance due to increased demand in alternative energy applications. Here, we report synthesis of nanostructured ZnO coatings directly from a solution precursor in a single step using plasma spray technique. Nanostructured ZnO coatings were deposited from the solution precursor prepared using zinc acetate and water/isopropanol. An axial liquid atomizer was employed in a DC plasma spray torch to create fine droplets of precursor for faster thermal treatment in the plasma plume to form ZnO. Microstructures of coatings revealed ultrafine particulate agglomerates. X-ray diffraction confirmed polycrystalline nature and hexagonal Wurtzite crystal structure of the coatings. Transmission electron microscopy studies showed fine grains in the range of 10-40 nm. Observed optical transmittance ({approx}65-80%) and reflectivity ({approx}65-70%) in the visible spectrum, and electrical resistivity (48.5-50.1 m{Omega} cm) of ZnO coatings are attributed to ultrafine particulate morphology of the coatings.

36 MATERIALS SCIENCE↗

Real-time microstructure imaging by Laue microdiffraction: A sample application in laser 3D printed Ni-based superalloys

Synchrotron-based Laue microdiffraction has been widely applied to characterize the local crystal structure, orientation, and defects of inhomogeneous polycrystalline solids by raster scanning them under a micro/nano focused polychromatic X-ray probe. In a typical experiment, a large number of Laue diffraction patterns are collected, requiring novel data reduction and analysis approaches, especially for researchers who do not have access to fast parallel computing capabilities. In this article, a novel approach is developed by plotting the distributions of the average recorded intensity and the average filtered intensity of the Laue patterns. Visualization of the characteristic microstructural features is realized in real time during data collection. As an example, this method is applied to image key features such as microcracks, carbides, heat affected zone, and dendrites in a laser assisted 3D printed Ni-based superalloy, at a speed much faster than data collection. Such analytical approach remains valid for a wide range of crystalline solids, and therefore extends the application range of the Laue microdiffraction technique to problems where real-time decision-making during experiment is crucial (for instance time-resolved non-reversible experiments).

36 MATERIALS SCIENCE↗

Multiferroic properties of sputtered BiFeO{sub 3} thin films

A cosputtering method was used to deposit BiFeO{sub 3} thin films on Pt/Ti/SiO{sub 2}/Si substrates. It was confirmed as a polycrystalline film with a tetragonal crystal structure in the annealed state. Both Fe{sup 2+} and Fe{sup 3+} ions were found to coexist in the film. The leakage current density is as low as 10{sup -3} A/cm{sup 2} at 120 kV/cm. This sputtered film shows multiferroic properties exhibiting a saturated ferroelectric loop with a large remnant polarization of 37 {mu}C/cm{sup 2} and a saturated ferromagnetic loop with saturation magnetization of 21 emu/cm{sup 3} at room temperature.

36 MATERIALS SCIENCE↗

The relationship between structural evolution and electrical percolation of the initial stages of tungsten chemical vapor deposition on polycrystalline TiN

This paper presents experimental results and a geometric model of the evolution of sheet resistance and surface morphology during the transition from nucleation to percolation of tungsten chemical vapor deposition over ultrathin polycrystalline titanium nitride (TiN). We observed two mechanisms of reduction in sheet resistance. At deposition temperatures higher than 310 deg. C, percolation effect is formed at {approx}35% of surface coverage, {theta}, and characterized with a sharp drop in resistance. At temperature below 310 deg. C, a reduction in resistance occurs in two steps. The first step occurs when {theta} = 35% and the second step at {theta} = 85%. We suggest a geometric model in which the electrical percolation pass is modulated by the thickness threshold of the islands at the instant of collision.

36 MATERIALS SCIENCE↗

Growth, disorder, and physical properties of ZnSnN{sub 2}

We examine ZnSnN{sub 2}, a member of the class of materials contemporarily termed “earth-abundant element semiconductors,” with an emphasis on evaluating its suitability for photovoltaic applications. It is predicted to crystallize in an orthorhombic lattice with an energy gap of 2 eV. Instead, using molecular beam epitaxy to deposit high-purity, single crystal as well as highly textured polycrystalline thin films, only a monoclinic structure is observed experimentally. Far from being detrimental, we demonstrate that the cation sublattice disorder which inhibits the orthorhombic lattice has a profound effect on the energy gap, obviating the need for alloying to match the solar spectrum.

36 MATERIALS SCIENCE↗

Effect of Mo-doping concentration on the physical behaviour of sprayed ZnO layers

Mo-doped zinc oxide layers (MZO) have been prepared on cleaned glass substrates by chemical spray pyrolysis technique by varying Mo-doping concentration in the range, 0 – 5 at. %. The X-ray diffraction studies revealed that all the as prepared layers were polycrystalline in nature and exhibited wurtzite structure. The layers prepared with lower Mo-doping concentration (<2 at. %) were preferably oriented along the (100) plane, whereas in the case of higher Mo-doping concentration (>2 at. %), the films showed the (002) plane as the dominant peak. The optical analysis indicated that all the layers had an average optical transmittance of 80% in the visible region and the evaluated band gap varied in the range, 3.28 - 3.50 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure studies with x-rays using diamond anvil cells

Pressure profoundly alters all states of matter. The symbiotic development of ultrahigh-pressure diamond anvil cells, to compress samples to sustainable multi-megabar pressures; and synchrotron x-ray techniques, to probe materials' properties in situ, has enabled the exploration of rich high-pressure (HP) science. In this article, we first introduce the essential concept of diamond anvil cell technology, together with recent developments and its integration with other extreme environments. We then provide an overview of the latest developments in HP synchrotron techniques, their applications, and current problems, followed by a discussion of HP scientific studies using x-rays in the key multidisciplinary fields. These HP studies include: HP x-ray emission spectroscopy, which provides information on the filled electronic states of HP samples; HP x-ray Raman spectroscopy, which probes the HP chemical bonding changes of light elements; HP electronic inelastic x-ray scattering spectroscopy, which accesses high energy electronic phenomena, including electronic band structure, Fermi surface, excitons, plasmons, and their dispersions; HP resonant inelastic x-ray scattering spectroscopy, which probes shallow core excitations, multiplet structures, and spin-resolved electronic structure; HP nuclear resonant x-ray spectroscopy, which provides phonon densities of state and time-resolved Mössbauer information; HP x-ray imaging, which provides information on hierarchical structures, dynamic processes, and internal strains; HP x-ray diffraction, which determines the fundamental structures and densities of single-crystal, polycrystalline, nanocrystalline, and non-crystalline materials; and HP radial x-ray diffraction, which yields deviatoric, elastic and rheological information. Integrating these tools with hydrostatic or uniaxial pressure media, laser and resistive heating, and cryogenic cooling, has enabled investigations of the structural, vibrational, electronic, and magnetic properties of materials over a wide range of pressure-temperature conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elastic moduli of hexagonal diamond and cubic diamond formed under shock compression

The relative stiffnesses and strengths of hexagonal diamond and cubic diamond constitute long standing unresolved issues, because relevant experimental results are lacking. Laser interferometry was used to experimentally determine the longitudinal sound speeds and moduli in hexagonal diamond and cubic diamond formed during the shock compression of graphite. The hexagonal diamond longitudinal moduli are significantly larger than the cubic diamond longitudinal moduli, and even exceed averaged cubic diamond single crystal values. Here, the measured hexagonal diamond longitudinal moduli, combined with high-pressure bulk moduli for cubic diamond single crystals, show that shock-formed hexagonal diamond shear moduli are larger than the shear moduli for cubic diamond single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-mediated structural transitions in bulk EuTiO 3

The high pressure structural phase diagram of EuTiO 3 is revisited by means of single crystal x-ray diffraction at pressures below 30GPa. We report a transition at about 3GPa with a surprisingly small lattice distortion. At 23GPa we have detected a yet unknown transition into a new orthorhombic phase (space group Ibam). Combining our observations on structures obtained on single crystals and polycrystalline samples with complementary methods, such as electrical resistivity and nuclear forward scattering of synchrotron radiation measured on polycrystalline samples, we address issues relevant to chemistry and disorder.

36 MATERIALS SCIENCE↗

Raman Spectra of Polycrystalline Lithium Sulfate, Sodium Sulfate, and Potassium Sulfate in the Pretransition Temperature Range Lower the Structural Phase Transition

Molecular relaxation processes in lithium sulfate (Li{sub 2}SO{sub 4}), sodium sulfate (Na{sub 2}SO{sub 4}), and potassium sulfate (K{sub 2}SO{sub 4}) are studied using Raman spectroscopy (RS). The order parameter decreases in the low-temperature phase as it approaches the phase transition. For example, this is typical of a first-order phase transition close to a second-order phase transition. The existence of the pretransition region in the investigated sulfates Li{sub 2}SO{sub 4}, Na{sub 2}SO{sub 4}, and K{sub 2}SO{sub 4} is proven.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduced synthesis temperatures of SrNbO 2 N perovskite films for photoelectrochemical fuel production

Perovskite oxynitrides, such as SrNbO 2 N, have been shown to be promising materials for photoanodes in tandem photoelectrochemical cells, due to their suitable bandgap and charge transport. However, thin film synthesis and characterization of oxynitride perovskites are challenging due to high processing temperatures that are incompatible with available substrates. In this work, we report on reduced synthesis temperatures of SrNbO 2 N perovskite thin films on Si substrates across a range of chemical compositions. Polycrystalline thin films with perovskite crystal structure are obtained by sputtering at ambient temperature and annealing at 550-600 degrees C. The perovskite structure has a relatively broad range of cation composition between 50 and 60% Sr with varying O/N ratio according to Rutherford backscattering spectrometry. The maximum photocurrent density was obtained at 55 cation % of Sr, which is slightly Sr-rich compared to the nominal SrNbO 2 N stoichiometry. This work shows the importance of considering cation and anion composition in studying oxynitride perovskites for solar fuel applications.

36 MATERIALS SCIENCE↗

Nonlinear Dynamics of Vortices in Different Types of Grain Boundaries

As a major component of linear particle accelerators, superconducting radio-frequency (SRF) resonator cavities are required to operate with lowest energy dissipation and highest accelerating gradient. SRF cavities are made of polycrystalline materials in which grain boundaries can limit maximum RF currents and produce additional power dissipation sources due to local penetration of Josephson vortices. The essential physics of vortex penetration and mechanisms of dissipation of vortices driven by strong RF currents along networks of grain boundaries and their contribution to the residual surface resistance have not been well understood. To evaluate how GBs can limit the performance of SRF materials, particularly Nb and Nb3Sn, we performed extensive numerical simulations of nonlinear dynamics of Josephson vortices in grain boundaries under strong dc and RF fields. The RF power due to penetration of vortices both in weakly-coupled and strongly-coupled grain boundaries was calculated as functions of the RF field and frequency. The result of this calculation manifested a quadratic dependence of power to field amplitude at strong RF currents, an illustration of resistive behavior of grain boundaries. Our calculations also showed that the surface resistance is a complicated function of field controlled by penetration and annihilation of vortices and antivortices in strong RF fields which ultimately saturates to normal resistivity of grain boundary. We found that Cherenkov radiation of rapidly moving vortices in grain boundaries can produce a new instability causing generation of expanding vortex-antivortex pair which ultimately drives the entire GB in a resistive state. This effect is more pronounced in polycrystalline thin film and multilayer coating structures in which it can cause significant increase in power dissipation and results in hysteresis effects in I-V characteristics, particularly at low temperatures.

Sheikhzada, Ahmad↗

Dynamic recrystallization and grain boundary migration in B2 FeAl

Transmission electron microscopy and optical microscopy were used to examine polycrystalline specimens of the B2-structured alloy FeAl strained under tension to fracture at elevated temperature. Strain-induced grain boundary migration was observed above 900 K and dynamic recrystallization was found at 1000 K and 1100 K. Little evidence of dynamic recovery was evident but some networks were formed at 1100 K.

Baker, I.↗

Structural and magnetotransport properties of the Y doped A-site deficient double layered manganites La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7}

We present structural, magnetic and electrical properties of the polycrystalline A-site-deficient yttrium doped double layered manganites La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7} (x=0.2, 0.3 and 0.4) prepared by a solid state reaction method. The samples crystallize in the tetragonal structure with the space group I4/mmm. Doping with Y decreases the cell parameters and causes a decrease of the metal-insulator transition temperature. The same evolution with doping is also seen for the deduced Curie temperature from susceptibility curves which present a clear paramagnetic-ferromagnetic transition. The significant positive intrinsic magnetoresistance, shown in all samples, reaches 85% at 122 K under 7 T for 0.3 doped sample and can be attributed to the suppression of spin fluctuations via aligning the spins under external magnetic field, while the extrinsic one is attributed to the inter-grain spin-polarized tunneling across the grain boundaries. The simulation of the resistivity curves in the entire temperature range show that the percolation model is suitable to fit our results. The applied magnetic field increases the density of states near the Fermi level, which is in accordance with the observed decrease of resistivity. - Graphical abstract: Resistivity and magnetoresistance of La{sub 1.2−x}□{sub 0.2}Y{sub x}Ca{sub 1.6}Mn{sub 2}O{sub 7} (x=0.2, 0.3, 0.4). Solid lines correspond to the fitting results. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗