SEARCH · Engineering Papers

Results for “Plant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 451 records · Page 25

All sources NASA NTRS DOE OSTI

NASA NTRS2000

Testing Plant Responses to Rarified Atmospheres for Inflatable Greenhouses

Reduced atmospheric pressures will likely be used to minimize mass and engineering requirements for plant growth habitats used in extraterrestrial applications. A chamber with high vacuum capability was used to design and begin construction of a system for testing plant responses to reduced pressure atmospheres. Several preliminary tests were conducted to evaluate chamber suitability for plant tests and to determine performance of thermal and vacuum systems at ambient and reduced pressure atmospheres down to 0.1 atm. The first tests consisted of measurements of internal gas volume and leakage rate. The method for volume determination was quite sensitive and will be needed for plant gas exchange measurements and calculations. This information will also be used in conjunction with the leak rate. Measured leak rates on the order of 0.46 mm Hg/min at 76 mm Hg pressure are low enough to conduct sensitive carbon dioxide exchange rate measurements at reduced pressure given an adequate plant sample (0.5 to 1.0 sq m area). A test rack with lighting provided by three high-pressure sodium vapor lamps was built to accommodate both short-term and long-term plant responses. Initial short-term experiments with lettuce showed that a pressure of 77 mm Hg resulted in a 6.1-fold increase in the rate of water loss compared to water loss at ambient pressure. Plants were severely wilted after 30 minutes exposure to 77 mm Hg. Water loss was found to be inversely correlated with atmospheric pressure over the range of pressures from 0.2 to 1.0 atm; the rate of water loss at 0.2 atm was 4.3 times higher than water loss at ambient pressure. Older leaves showed moderate wilting during exposure to 156 mm Hg, but those exposed to 345 mm, Hg remained turgid. Results suggest a reduced atmospheric pressure limit of 0.2 to 0.3 atm for lettuce grown in a solid medium. Follow-up experiments with carbon dioxide control and control at high relative humidity (> 90 %) will be needed to further confirm and define safe reduced pressure limits that are feasible for plant tolerance and growth.

Corey, Kenneth A.↗

NASA NTRS2001

Greenhouse (III): Gas-Exchange and Seed-to-Seed Experiments on the Russian Space Station MIR and Earth-grown, Ethylene-Treated Wheat Plants

The Mir Space Station provided an outstanding opportunity to study long-term plant responses when exposed to a microgravity environment. Furthermore, if plants can be grown to maturity in a microgravity environment, they might be used in future bioregenerative life-support systems (BLSS). The primary objective of the Greenhouse experiment onboard Mir was to grow Super Dwarf and Apogee wheat through complete life cycles in microgravity; i.e., from seed-to-seed-to-seed. Additional objectives were to study chemical, biochemical, and structural changes in plant tissues as well as photosynthesis, respiration, and transpiration (evaporation of water from plants). Another major objective was to evaluate the suitability clothe facilities on Mir for advanced research with plants. The Greenhouse experiment was conducted in the Russian/Bulgarian plant growth chamber, the Svet, to which the United States added instrumentation systems to monitor changes in CO2 and water vapor caused by the plants (with four infrared gas analyzers monitoring air entering and leaving two small plastic chambers). In addition, the US instrumentation also monitored O2; air, leaf (IR), cabin pressure; photon flux; and substrate temperature and substrate moisture (16 probes in the root module). Facility modifications were first performed during the summer of 1995 during Mir 19, which began after STS-72 left Mir. Plant development was monitored by daily observations and some photographs.

Campbell, William F.↗

NASA NTRS1947

Rocket Power Plants Based on Nitric Acid and their Specific Propulsive Weights

Two fields are reserved for the application of rocket power plants. The first field is determined by the fact that the rocket power plant is the only type of power plant that can produce thrust without dependence upon environment. For this field,the rocket is therefore the only possible power plant and the limit of what may be done is determined by the status of the technical development of these power plants at the given moment. The second field is that in which the rocket power plant proves itself the most suitable as a high-power drive in free competition with other types of power plants. The exposition will be devoted to the demarcation of this field and its division among the various types of rocket power plants.

Zborowski, Helmut↗

NASA NTRS2004

Response of graywater recycling systems based on hydroponic plant growth to three classes of surfactants

Anionic (sodium laureth sulfate, SLES), amphoteric (cocamidopropyl betaine, CAPB) and nonionic (alcohol polyethoxylate, AE) surfactants were added to separate nutrient film technique (NFT) hydroponic systems containing dwarf wheat (Triticum aestivum cv. USU Apogee) in a series of 21 day trials. Surfactant was added either in a (1). temporally dynamic mode (1-3 g surfactant m(-2) growing area d(-1)) as effected by automatic addition of a 300 ppm surfactant solution to meet plant water demand, or (2). continuous mode (2 g surfactant m(-2) growing area d(-1)) as effected by slow addition (10 mLh(-1)) of a 2000 ppm surfactant solution beginning at 4d after planting. SLES showed rapid primary degradation in both experiments, with no accumulation 24 h after initial addition. CAPB and AE were degraded less rapidly, with 30-50% remaining 24 h after initial addition, but CAPB and AE levels were below detection limit for the remainder of the study. No reductions in vegetative growth of wheat were observed in response to SLES, but biomass was reduced 20-25% with CAPB and AE. Microbial communities associated with both the plant roots and wetted hardware surfaces actively degraded the surfactants, as determined by monitoring surfactant levels following pulse additions at day 20 (with plants) and day 21 (after plant removal). In order to test whether the biofilm communities could ameliorate phytotoxicity by providing a microbial community acclimated for CAPB and AE decay, the continuous exposure systems were planted with wheat seeds after crop removal at day 21. Acclimation resulted in faster primary degradation (>90% within 24h) and reduced phytotoxicity. Overall, the studies indicate that relatively small areas (3-5m(2)) of hydroponic plant systems can process per capita production of mixed surfactants (5-10 g x person(-1)d(-1)) with minimal effects on plant growth.

Hydroponics↗

NASA NTRS2008

Expert System Control of Plant Growth in an Enclosed Space

The Expert System is an enclosed, controlled environment for growing plants, which incorporates a computerized, knowledge-based software program that is designed to capture the knowledge, experience, and problem-solving skills of one or more human experts in a particular discipline. The Expert System is trained to analyze crop/plant status, to monitor the condition of the plants and the environment, and to adjust operational parameters to optimize the plant-growth process. This system is intended to provide a way to remotely control plant growth with little or no human intervention. More specifically, the term control implies an autonomous method for detecting plant states such as health (biomass) or stress and then for recommending and implementing cultivation and/or remediation to optimize plant growth and to minimize consumption of energy and nutrients. Because of difficulties associated with delivering energy and nutrients remotely, a key feature of this Expert System is its ability to minimize this effort and to achieve optimum growth while taking into account the diverse range of environmental considerations that exist in an enclosed environment. The plant-growth environment for the Expert System could be made from a variety of structures, including a greenhouse, an underground cavern, or another enclosed chamber. Imaging equipment positioned within or around the chamber provides spatially distributed crop/plant-growth information. Sensors mounted in the chamber provide data and information pertaining to environmental conditions that could affect plant development. Lamps in the growth environment structure supply illumination, and other additional equipment in the chamber supplies essential nutrients and chemicals.

May, George↗

NASA NTRS2011

Crop and Substrate Tests with Single Use Rooting "Pillows" for the VEGGIE Plant Growth Hardware

VEGGIE is a small plant production chamber built by ORBITEC. This chamber can be collapsed for easy stowage and deployed in orbit. It is designed for gravity independent operation, and provides 0.17 square m of crop growth area with three primary subsystems: an LED light panel, extendable transparent Teflon bellows to enclose the plants, and a wicking reservoir. VEGGIE would provide the capability for astronauts to grow fresh foods for dietary supplementation. Initial planting concepts tested with the VEGGIE included direct seeding or plug placement on the reservoir surface. These options had issues of salt accumulation and eventual toxicity if the reservoir was filled with nutrient solution, and hardware reuse was limited due to sanitation. In response a rooting packet or "pillow" concept was developed: single-use bags of media containing time release fertilizer with a wicking surface contacting the VEGGIE reservoir. Pillows being tested are small electrostatic bags with a Nitex nylon mesh side, each holding 100 mL of dry media. Six pillows fit in one VEGGIE unit; however pillow size could vary depending on crop selected. Seeds can be planted directly in pillows and planted pillows can be hydrated in space as desired. Our goals were to define optimal media and crops for an ISS mission scenario. Plant tests in pillows were performed in a controlled environment chamber set to habitat-relevant conditions, and capillary reservoir analogs were utilized. Media tested within pillows included: a commercial peat-based potting mix, arcillite (calcined clay), perlite: vermiculite, and peat-based: arcillite blends. Testing included 15 types of leafy greens, snow pea, radish, and herbs. Media performance was crop dependent, but generally plants showed the greatest growth in the peat-based: arcillite mixes. Crops with the best performance in pillows were identified, and testing is underway with select leafy greens examining plant and microbial load response to repeated harvest. We plan to use findings from previous flight testing with media to evaluate the effects of capillary flow from the reservoir to pillows in microgravity.

Massa, Gioia↗

NASA NTRS2018

Using Remote Sensing Mapping and Growth Response to Environmental Variability to Aide Aquatic Invasive Plant Management

Management of aquatic weeds in complex watersheds and river systems present many challenges to assessment, planning and implementation of management practices for floating and submerged aquatic invasive plants. The Delta Region Areawide Aquatic Weed Project (DRAAWP), a USDA sponsored area-wide project, is working to enhance planning, decision-making and operational efficiency in the California Sacramento-San Joaquin Delta. Satellite and airborne remote sensing are used map (area coverage and biomass density), direct operations, and assess management impacts on plant communities. Archived satellite records enable review of results following previous climate and management events and aide in developing long-term strategies. Examples of remote sensing aiding effectiveness of aquatic weed management will be discussed as well as areas for potential technological improvement. Modeling at local and watershed scales using the SWAT modeling tool provides insight into land-use effects on water quality (described by Zhang in same Symposium). Controlled environment growth studies have been conducted to quantify the growth response of invasive aquatic plants to water quality and other environmental factors. Environmental variability occurs across a range of time scales from long-term climate and seasonal trends to short-term water flow mediated variations. Response time for invasive species response are examined at time scales of weeks, day, and hours using a combination of study duration and growth assessment techniques to assess water quality, temperature (air and water), nitrogen, phosphorus, and light effects. These provide response parameters for plant growth models in response to the variation and interact with management and economic models associated with aquatic weed management. Plant growth models are to be informed by remote sensing and applied spatially across the Delta to balance location and type of aquatic plant, growth response to altered environments and phenology. Initial utilization of remote sensing tools developed for mapping of aquatic invasive plants improved operational efficiency in management practices. These assessment methods provide a comprehensive and quantitative view of aquatic invasive plants communities in the California Delta.

Remote Sensing↗

NASA NTRS2018

Aiding in the Efforts of Bioregenerative Life Support for the Future Residents of Mars and Long-Duration Space Flights Plant Growth in Amended Martian Regolith Simulant

Currently, the goal of plant growth research at KSC (Kennedy Space Center) is to provide a sustainable source of healthy food on long-duration space flights so astronauts and future residents of Mars can get the nutrition they need and produce food, recycle the atmosphere, and aid in recycling water. The sustainable production of food will aid in the efforts of closed life support. Plants have a vital application for bioregenerative life support as demands for food and oxygen can be provided through photosynthesis, while the carbon dioxide from human respiration is removed. In order for a growing medium to provide for plant growth, it needs to provide support, oxygen, ions, and liquid to the plant. This summer research determines how amended Martian regolith simulant acts as a growing medium for plants through looking at the structural properties of each amendment. Mars is covered with regolith which is crushed volcanic rock that is composed of a high amount of perchlorate salts. The composition of Martian soil is such that it is roughly basaltic and consists of sulfur, nitrates, and oxychlorine species. Martian regolith simulants have been generated to further analyze plant growth and aim to replicate features of the reference sample. The JSC (Johnson Space Center) Mars-1A regolith simulant resembles Martian regolith at the Viking I landing site. The objectives of the research this summer at Kennedy Space Center are to devise a plant growth in amended JSC Mars-1A Martian regolith simulant and perform crop studies to assess the performance of full duration crop growth in amended Martian regolith simulant. This research will provide a deeper understanding of how the combination of soil amendments to Martian regolith has a synergistic effect on improving crop production The plant growth experiment will be completed with three treatments each containing inorganic and organic soil amendments.

Onsay, Daphne↗

NASA NTRS2022

Microgreens Root Zone/Shoot Zone Partitioned Planting Box

To enable sustainable food production in future human exploration missions, plant growth is being studied by the Space Crop Production Team at KSC. Microgreens are good candidates for food supplements and contain specific nutrients that are lacking in the prepackaged diet, including vitamin C and vitamin K. Because they are densely sown, typical growth methods do not allow the ability to distinguish between the levels of evaporation from the rooting substrate and transpiration from the leaves. With larger plants, the root and shoot zone can be separated to distinguish these fluxes and accurate transpiration measurements of plant canopies are feasible. Furthermore, separation of the root and shoot zone may also be beneficial when harvesting microgreens in microgravity as it may reduce microbial contamination of the edible biomass by the roots, which have high microbial loads. Using a root and shoot separator box when harvesting may help with microbial contamination, but these tiny plants are challenging to handle in microgravity, so harvest management remains an open question. The innovation proposed here is a microgreen root/shoot partitioned planting box, which offers a solution to these challenges with accurate gas exchange measurements and a safe microgreen harvest in low gravity environments. Being able to measure transpiration of a microgreen canopy will be important for modeling plant growth in reduced gravity environments, so the first objective was to develop a planting unit with a seal between the root zone and the shoot zone. With an unsuitable harvesting technique, freshly harvested microgreens may add debris to the cabin, so the second objective was to test different harvesting techniques and management approaches associated with this innovation. These two objectives were pursued in parallel since many goals were the same: develop a planting unit that 1) separates the shoots from the roots, 2) allows acceptable germination rate, and 3) allows for seedlings to emerge and develop. What differed was the need to have a seal, which was only applicable for our gas exchange goal, and the need to have an embedded harvesting mechanism and bagging method which only applied to our harvesting goal. Testing of the various harvesting mechanisms and bagging methods was performed during a series of parabolic flights. All parabolic flight procedures took place inside a rented secondary containment chamber (e.g., glovebox) that was developed by the University of Louisville specifically for experiments involving fluids and other materials that may become airborne during reduced gravity flight. Three different harvesting methods and two different bagging collection methods were tested for microgreens. A third bagging method was initially tested but found to be unsuitable. Human factors were also taken into consideration, to identify which harvest and bagging collection methods would be easiest to use with favorable results in microgravity. Three parabolic flight tests were performed in total, one in November 2021 and two in December 2021.

Gioia Massa↗

NASA NTRSDate not supplied

Mitigation of Biofouling in Plant Watering Systems Using AgXX, a Novel Surface Treatment

The development of plant growth systems with high yields and low maintenance for food production is a key focus area for NASA. One of the remaining technical challenges is keeping the plant watering systems clean without affecting plant growth, requiring consumables, or demanding crew time. Plant watering systems, such as the one onboard the International Space Station (ISS), provide a nutrient rich environment for biofilm formation. Frequent maintenance is necessary to prevent biofouling, which currently requires crew time and a mechanical means of cleaning. Better solutions are needed. The current ISS practices for biofilm mitigation in the water recovery and distribution system include the use of biocides (silver ion or iodine) along with regular maintenance (e.g. flushing, filter replacement). These biocide-based strategies could be problematic for plant watering systems, such as in Ohalo, the Exploration Garden, and the APH, due to incompatibilities of the biocides with plants. We propose the application of AgXX, a novel antifouling surface treatment that meets the above requirements. This paper will report on an initial study that was completed to determine whether AgXX would be effective in a plant nutrient solution, and whether it would negatively impact plant growth in a hydroponics-type system.

Tesia D. Irwin↗

NASA NTRSDate not supplied

RGB Imaging as a Tool to Monitor Indoor Crop Plant Production

Future crop production in space will require robust monitoring technologies that can optimize crop yield, reduce waste, and generate data for an automated plant growth design. Imaging has been suggested as a tool for measuring plant health, yet imaging systems for indoor crops have not been tested in spaceflight. Fortunately, RGB images of crop plants growing inside the Advanced Plant Habitat (APH) aboard the ISS have already been captured. In ground-based studies, the Kennedy Space Center (NASA, KSC) is collaborating with the United States Department of Agriculture (USDA ARS) to develop an imaging system for monitoring indoor crop plant health. In one study, we applied a drought stress to ‘Dragoon’ lettuce plants over a period of 14 days and captured RGB images in 24 h increments. Images were analyzed, and by applying a difference index, the images were able to be used to detect the drought stress in lettuce. This difference index was then applied to RGB images collected inside the APH ground unit for a pre-flight experiment growing ‘Outredgous’ lettuce under different substrate moisture conditions, and results showed that the RGB camera was capable of detecting drought stress inside the spaceflight plant growth hardware. These results suggest that RGB cameras already deployed to space may offer valuable information for monitoring plant production in extraterrestrial environments. This research was supported by NASA’s space biology program.

Rachel Tucker↗

NASA NTRSDate not supplied

Ground-based Characterization of Plant Water Management (PWM) Hydroponic Root Modules for Spaceflight

Hydroponic crop production in space is crucial for long-term space travel but faces numerous challenges – one of which is providing sufficient dissolved oxygen (DO) in nutrient solution. In microgravity environments, surface tension is the primary force acting on liquids, causing water to form into suspended spherical droplets. This can suffocate plants as the liquid clings onto plant roots and the lack of aeration deprives the plant of oxygen needed for growth. To overcome these challenges, plant water management (PWM) systems explore options of growing plants in space autonomously and passively through capillary forces. From 2018-2023, there have been 6 PWM experiments conducted on the ISS. In past experiments conducted in microgravity, bubbles formed in test cells have disrupted fluid dynamics and may adversely affect plant growth. The accumulation of bubbles may lead to inconsistent nutrient delivery, break prime in tubing, and suspend plant roots in air, leading to plant stress and eventually death. Current research efforts focus on the oxygenation capabilities of the PWM system along with a comprehensive sensor array that will improve nutrient and DO monitoring capabilities.

L Wang↗

DOE OSTI2020

INTEGRATION OF FLEX EQUIPMENT AND OPERATOR ACTIONS IN PLANT FORCE-ON-FORCE MODELS WITH DYNAMIC RISK ASSESSMENT

The overall operation and maintenance cost to protect nuclear power plants accounts for approximately 7% of the total cost of power generation, with labor accounting for half of this cost. In the current research, from interaction with utilities and other stakeholders, it was determined that physical security forces account for nearly 20% of the entire workforce at several nuclear power plants. Labor costs continue to rise in the U.S., so any measures to reduce the cost of operating a nuclear power plant will need to include a reduction in labor. The physical security pathway within the DOE’s Light Water Reactor Sustainability program aims to lower the cost of physical security through directed research into modeling and simulation, application of advanced sensors or deployment of advanced weapons. This report presents a modeling and simulation framework for integrating Diverse and Flexible Mitigation Capability (FLEX) portable equipment performance with Force on Force models of a plant’s physical security posture. The generic framework is described in detail, followed by a case study of modeling an adversarial attack aimed at causing a radiological release by sabotaging the plant’s power supply and its ultimate heat sink capabilities at a hypothetical nuclear power plant. Two different FLEX deployment strategies, series and parallel, are modeled with distinct timelines. The results of the adversarial attack modeled in a commercial Force on Force tool are integrated with the FLEX deployment model in INL’s dynamic modeling tool EMRALD. Monte Carlo simulation is used to model the distribution of the timeline in FLEX deployment strategies. The results demonstrate that, even in the extreme case of a successful adversarial attack, deployment of FLEX equipment can result in a significantly high likelihood of preventing radiological release. The modeling and simulation framework integrating FLEX equipment with Force on Force models enables the nuclear power plants to credit FLEX portable equipment in the plant security posture, resulting in an efficient and optimized physical security.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Effect of Power Plant Capacity on the CAPEX, OPEX, and LCOC of the CO2 Capture Process in Pre-Combustion Applications - Abstract

Aspen Plus v8.8 was used to simulate the pre-combustion CO2 capture process from a typical fuel gas stream at different power plant capacities ranging from 54.3 to 543 MW. Polyethylene glycol polydimethyl siloxane (PEGPDMS-1) was used as a physical solvent to capture CO2 in a countercurrent packed-bed absorber containing a structured packing (Mellapak 250Y). The process pressure was 51.4 bar and the solvent temperature was varied from 10 to 40 oC. The internal diameter of the absorber ranged from 1.9 to 7 m and the packing height from 13.9 to 45.5 m. The physico-chemical properties were obtained and modeled using the Perturbed Chain-Statistical Associating Fluid Theory (PC-SAFT) Equation-of-State (EOS). Four process constraints were imposed in Aspen Plus: (1) no flooding in the absorber, (2) the absorber height to diameter ratio (H/D) is greater than or equal 6, (3) at least 90 mol% of the CO2 capture from the fuel gas stream, and (4) the CO2 stream destined to sequestration sites should contain less than 600 ppm water concentration and less than or equal 0.5 mol% of fuel gases (H2, CO, CH4). The plant lifetime was assumed to be 30 years with an annual discount rate of 10% and an annual maintenance cost of 4% of the total capital expenses. Seven power plants with different capacities were used and for each plant, the corresponding CO2 capture process was simulated. The absorber flooding was checked using the generalized pressure drop correlation (GPDC) by Leva [1] and the capital expenditure (CAPEX), operating expenditure (OPEX), and levelized costs per ton of CO2 captured (LCOC) were calculated [2-5]. Normalized by the largest power plant capacity (543 MW) used in the simulation, the results indicated that the capital and operating expenditures increased, however, the LCOC decreased with increasing plant capacity. This behavior was due to the increased annual tonnage of the CO2 captured with plant capacity as shown in Figure 1. The calculated CAPEX, OPEX, LCOC and the tonnage of CO2 captured for the 543 MW power plant were about 52 MM$, 22 MM$/year, 7.46 $/ton and 4 MM ton/year.

Ashkanani, Husain↗

DOE OSTI2021

Plants with useful traits and related methods

The present invention provides methods for obtaining plants that exhibit useful traits by transient suppression of the MSH1 gene of the plants. Methods for identifying genetic loci that provide for useful traits in plants and plants produced with those loci are also provided. In addition, plants that exhibit the useful traits, parts of the plants including seeds, and products of the plants are provided as well as methods of using the plants.

Mackenzie, Sally Ann↗

DOE OSTI2023

Episomal DNA vectors for plant genetic engineering

This disclosure pertains to a novel platform for genetic engineering of chloroplasts. The disclosure provides episomal DNA vectors containing a chloroplast origin of replication. These vectors remain extra-plastomic and sustainably and autonomously replicate in chloroplasts of the plant cells transformed with the vectors and in the plants regenerated from the transformed plant cells. The episomal DNA vectors do not contain any sequence that shares sequence homology with the plastome DNA and, thus, do not get integrated into the plastome DNA. The vectors can also comprise one or more genes of interest that confer desirable characteristics to the transformed plant cells. The disclosure also provides methods of transforming plant cells with the episomal DNA vectors and regenerating from the transformed plant cells plants having desirable characteristics. The vectors and methods disclosed herein provide a significant advancement in speed, flexibility, and prospects of introducing genes into plant cells for effective metabolic engineering.

Lenaghan, Scott C.↗

DOE OSTI2023

Plant–soil feedback under drought: does history shape the future?

Plant–soil feedback (PSF) is widely recognised as a driver of plant community composition, but understanding of its response to drought remains in its infancy. Here, we provide a conceptual framework for the role of drought in PSF, considering plant traits, drought severity, and historical precipitation over ecological and evolutionary timescales. Comparing experimental studies where plants and microbes do or do not share a drought history (through co-sourcing or conditioning), we hypothesise that plants and microbes with a shared drought history experience more positive PSF under subsequent drought. To reflect real-world responses to drought, future studies need to explicitly include plant–microbial co-occurrence and potential co-adaptation and consider the precipitation history experienced by both plants and microbes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Mass spectral imaging showing the plant growth-promoting rhizobacteria's effect on the Brachypodium awn

The plant growth-promoting rhizobacteria (PGPR) on the host plant surface play a key role in biological control and pathogenic response in plant functions and growth. However, it is difficult to elucidate the PGPR effect on plants. Such information is important in biomass production and conversion. Brachypodium distachyon (Brachypodium), a genomics model for bioenergy and native grasses, was selected as a C3 plant model; and the Gram-negative Pseudomonas fluorescens SBW25 ( P.) and Gram-positive Arthrobacter chlorophenolicus A6 ( A.) were chosen as representative PGPR strains. The PGPRs were introduced to the Brachypodium seed's awn prior to germination, and their possible effects on the seeding and growth were studied using different modes of time-of-flight secondary ion mass spectrometry (ToF-SIMS) measurements, including a high mass-resolution spectral collection and delayed image extraction. We observed key plant metabolic products and biomarkers, such as flavonoids, phenolic compounds, fatty acids, and auxin indole-3-acetic acid in the Brachypodium awns. Furthermore, principal component analysis and two-dimensional imaging analysis reveal that the Brachypodium awns are sensitive to the PGPR, leading to chemical composition and morphology changes on the awn surface. Our results show that ToF-SIMS can be an effective tool to probe cell-to-cell interactions at the biointerface. This work provides a new approach to studying the PGPR effects on awn and shows its potential for the research of plant growth in the future.

metabolite↗